! Started logfile: J1300+1206_S_2017_05_27_pus_uvs.log on Fri May 3 11:07:02 2019 obs J1300+1206_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1300+1206_S_2017_05_27_pus_uva.fits ! AN table 1: 143 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.909868 visibilities/baseline/integration-bin. ! Found source: J1300+1206 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 23420 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1300+1206_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 737 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.839520Jy sigma=0.022999 ! Fit after self-cal, rms=0.822056Jy sigma=0.022947 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.857 mas, bmaj=7.857 mas, bpa=-8.42 degrees ! Estimated noise=908.253 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.102521 Jy ! Component: 100 - total flux cleaned = 0.140077 Jy ! Total flux subtracted in 100 components = 0.140077 Jy ! Clean residual min=-0.015206 max=0.021792 Jy/beam ! Clean residual mean=-0.000006 rms=0.005039 Jy/beam ! Combined flux in latest and established models = 0.140077 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.140077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142867Jy sigma=0.002666 ! Fit after self-cal, rms=0.142522Jy sigma=0.002664 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.471 mas, bmaj=8.691 mas, bpa=-9.244 degrees ! Estimated noise=526.548 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0298903 Jy ! Component: 100 - total flux cleaned = 0.0469091 Jy ! Component: 150 - total flux cleaned = 0.0589606 Jy ! Component: 200 - total flux cleaned = 0.0676056 Jy ! Total flux subtracted in 200 components = 0.0676056 Jy ! Clean residual min=-0.012179 max=0.019732 Jy/beam ! Clean residual mean=-0.000023 rms=0.004035 Jy/beam ! Combined flux in latest and established models = 0.207683 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 30 components and 0.207683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130045Jy sigma=0.002978 ! Fit after self-cal, rms=0.129883Jy sigma=0.002977 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.65 FD 0.86 HN 0.88 KP 0.93 ! LA 0.95 MK 28.61 NL 0.84 OV 0.95 ! PT 1.01 SC 0.82 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 0.89 HN 0.94 KP 0.90 ! LA 0.90 MK 10.29 NL 0.99 OV 0.98 ! PT 0.99 SC 0.91 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 23.02 FD 0.91 HN 0.93 KP 0.94 ! LA 0.94 MK 0.86 NL 0.95 OV 0.91 ! PT 0.96 SC 0.90 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 0.86 KP 1.00* ! LA 0.88 MK 0.73 NL 1.00* OV 1.00* ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.129883Jy sigma=0.002977 ! Fit after self-cal, rms=2.156741Jy sigma=0.000820 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.96 mas, bmaj=9.349 mas, bpa=-6.287 degrees ! Estimated noise=620.789 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00800281 Jy ! Component: 100 - total flux cleaned = 0.00484319 Jy ! Component: 150 - total flux cleaned = 0.0022749 Jy ! Component: 200 - total flux cleaned = 6.81604e-05 Jy ! Total flux subtracted in 200 components = 6.81604e-05 Jy ! Clean residual min=-0.010871 max=0.012090 Jy/beam ! Clean residual mean=-0.000022 rms=0.002263 Jy/beam ! Combined flux in latest and established models = 0.207751 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 48 components and 0.207751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.149062Jy sigma=0.000835 ! Fit after self-cal, rms=2.149368Jy sigma=0.000818 ! Inverting map ! Added new window around map position (-5.5, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100916 Jy ! Component: 100 - total flux cleaned = -0.000782318 Jy ! Component: 150 - total flux cleaned = -0.00206781 Jy ! Component: 200 - total flux cleaned = -0.00296081 Jy ! Total flux subtracted in 200 components = -0.00296081 Jy ! Clean residual min=-0.010390 max=0.007542 Jy/beam ! Clean residual mean=-0.000017 rms=0.002116 Jy/beam ! Combined flux in latest and established models = 0.20479 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 64 components and 0.20479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.145939Jy sigma=0.000821 ! Fit after self-cal, rms=2.145920Jy sigma=0.000820 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.145920Jy sigma=0.000820 ! Fit after self-cal, rms=3.189119Jy sigma=0.000702 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.776 mas, bmaj=9.33 mas, bpa=-8.409 degrees ! Estimated noise=633.984 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00283512 Jy ! Component: 100 - total flux cleaned = 0.00178857 Jy ! Component: 150 - total flux cleaned = 0.00107348 Jy ! Component: 200 - total flux cleaned = 0.000582222 Jy ! Total flux subtracted in 200 components = 0.000582222 Jy ! Clean residual min=-0.005972 max=0.004578 Jy/beam ! Clean residual mean=-0.000012 rms=0.001286 Jy/beam ! Combined flux in latest and established models = 0.205372 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 77 components and 0.205372 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.187145Jy sigma=0.000704 ! Fit after self-cal, rms=3.187159Jy sigma=0.000702 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00078814 Jy ! Component: 100 - total flux cleaned = -0.000928025 Jy ! Component: 150 - total flux cleaned = -0.00118413 Jy ! Component: 200 - total flux cleaned = -0.00118295 Jy ! Total flux subtracted in 200 components = -0.00118295 Jy ! Clean residual min=-0.005840 max=0.004552 Jy/beam ! Clean residual mean=-0.000012 rms=0.001269 Jy/beam ! Combined flux in latest and established models = 0.204189 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 91 components and 0.204189 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.186248Jy sigma=0.000703 ! Fit after self-cal, rms=3.186247Jy sigma=0.000703 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.186247Jy sigma=0.000703 ! Fit after self-cal, rms=2.215926Jy sigma=0.000695 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.768 mas, bmaj=9.355 mas, bpa=-8.698 degrees ! Estimated noise=649.687 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00426289 Jy ! Component: 100 - total flux cleaned = 0.00375131 Jy ! Component: 150 - total flux cleaned = 0.00329585 Jy ! Component: 200 - total flux cleaned = 0.00287293 Jy ! Total flux subtracted in 200 components = 0.00287293 Jy ! Clean residual min=-0.005690 max=0.004112 Jy/beam ! Clean residual mean=-0.000010 rms=0.001233 Jy/beam ! Combined flux in latest and established models = 0.207062 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 96 components and 0.207062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.215047Jy sigma=0.000696 ! Fit after self-cal, rms=2.215050Jy sigma=0.000696 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000321409 Jy ! Component: 100 - total flux cleaned = -0.000508555 Jy ! Component: 150 - total flux cleaned = -0.000594874 Jy ! Component: 200 - total flux cleaned = -0.000764517 Jy ! Total flux subtracted in 200 components = -0.000764517 Jy ! Clean residual min=-0.005655 max=0.004155 Jy/beam ! Clean residual mean=-0.000010 rms=0.001221 Jy/beam ! Combined flux in latest and established models = 0.206298 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 106 components and 0.206298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.214780Jy sigma=0.000696 ! Fit after self-cal, rms=2.214779Jy sigma=0.000696 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.214779Jy sigma=0.000696 ! Fit after self-cal, rms=2.306214Jy sigma=0.000694 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.976 mas, bmaj=12.76 mas, bpa=-11.49 degrees ! Estimated noise=731.234 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00329561 Jy ! Component: 100 - total flux cleaned = 0.00257703 Jy ! Component: 150 - total flux cleaned = 0.00227292 Jy ! Component: 200 - total flux cleaned = 0.00227267 Jy ! Total flux subtracted in 200 components = 0.00227267 Jy ! Clean residual min=-0.004981 max=0.003825 Jy/beam ! Clean residual mean=-0.000019 rms=0.001236 Jy/beam ! Combined flux in latest and established models = 0.20857 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 117 components and 0.20857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.305456Jy sigma=0.000696 ! Fit after self-cal, rms=2.305443Jy sigma=0.000696 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000365997 Jy ! Component: 100 - total flux cleaned = -0.000729219 Jy ! Component: 150 - total flux cleaned = -0.000727758 Jy ! Component: 200 - total flux cleaned = -0.000796216 Jy ! Total flux subtracted in 200 components = -0.000796216 Jy ! Clean residual min=-0.004913 max=0.003812 Jy/beam ! Clean residual mean=-0.000019 rms=0.001232 Jy/beam ! Combined flux in latest and established models = 0.207774 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 123 components and 0.207774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.305271Jy sigma=0.000696 ! Fit after self-cal, rms=2.305272Jy sigma=0.000696 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.767 mas, bmaj=9.397 mas, bpa=-8.886 degrees ! Estimated noise=668.132 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.767 x 9.397 at -8.886 degrees (North through East) ! Clean map min=-0.0084005 max=0.18804 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.042 mas, bmaj=8.307 mas, bpa=-7.931 degrees ! Estimated noise=1280.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.142926 Jy ! Component: 100 - total flux cleaned = 0.188602 Jy ! Component: 150 - total flux cleaned = 0.210062 Jy ! Component: 200 - total flux cleaned = 0.215806 Jy ! Total flux subtracted in 200 components = 0.215806 Jy ! Clean residual min=-0.009539 max=0.007494 Jy/beam ! Clean residual mean=-0.000012 rms=0.001975 Jy/beam ! Combined flux in latest and established models = 0.215806 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.215806 Jy ! Inverting map and beam ! Estimated beam: bmin=3.767 mas, bmaj=9.397 mas, bpa=-8.886 degrees ! Estimated noise=668.132 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000101418 Jy ! Component: 100 - total flux cleaned = -0.00114661 Jy ! Component: 150 - total flux cleaned = -0.00224546 Jy ! Component: 200 - total flux cleaned = -0.00323735 Jy ! Total flux subtracted in 200 components = -0.00323735 Jy ! Clean residual min=-0.006243 max=0.004529 Jy/beam ! Clean residual mean=-0.000012 rms=0.001333 Jy/beam ! Combined flux in latest and established models = 0.212569 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 32 components and 0.212569 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.976 mas, bmaj=12.76 mas, bpa=-11.49 degrees ! Estimated noise=731.234 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00289252 Jy ! Component: 100 - total flux cleaned = -0.00367302 Jy ! Component: 150 - total flux cleaned = -0.00434902 Jy ! Component: 200 - total flux cleaned = -0.0048338 Jy ! Total flux subtracted in 200 components = -0.0048338 Jy ! Clean residual min=-0.004631 max=0.003870 Jy/beam ! Clean residual mean=-0.000021 rms=0.001238 Jy/beam ! Combined flux in latest and established models = 0.207735 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000440531 Jy ! Component: 100 - total flux cleaned = -0.000844904 Jy ! Component: 150 - total flux cleaned = -0.000846684 Jy ! Component: 200 - total flux cleaned = -0.00084165 Jy ! Total flux subtracted in 200 components = -0.00084165 Jy ! Clean residual min=-0.004681 max=0.003877 Jy/beam ! Clean residual mean=-0.000020 rms=0.001229 Jy/beam ! Combined flux in latest and established models = 0.206894 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 56 components and 0.206894 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.767 mas, bmaj=9.397 mas, bpa=-8.886 degrees ! Estimated noise=668.132 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000497818 Jy ! Component: 100 - total flux cleaned = -0.00077497 Jy ! Component: 150 - total flux cleaned = -0.000769227 Jy ! Component: 200 - total flux cleaned = -0.000765224 Jy ! Total flux subtracted in 200 components = -0.000765224 Jy ! Clean residual min=-0.006135 max=0.004591 Jy/beam ! Clean residual mean=-0.000012 rms=0.001276 Jy/beam ! Combined flux in latest and established models = 0.206129 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 68 components and 0.206128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.305125Jy sigma=0.000697 ! Fit after self-cal, rms=2.305136Jy sigma=0.000697 wmodel J1300+1206_S_2017_05_27_pus_map.mod ! Writing 68 model components to file: J1300+1206_S_2017_05_27_pus_map.mod wobs J1300+1206_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1300+1206_S_2017_05_27_pus_uvs.fits wwins J1300+1206_S_2017_05_27_pus_map.win ! wwins: Wrote 2 windows to J1300+1206_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00260248 Jy ! Component: 100 - total flux cleaned = -0.00444441 Jy ! Component: 150 - total flux cleaned = -0.00539285 Jy ! Component: 200 - total flux cleaned = -0.00638737 Jy ! Component: 250 - total flux cleaned = -0.00735422 Jy ! Component: 300 - total flux cleaned = -0.00837622 Jy ! Component: 350 - total flux cleaned = -0.00899008 Jy ! Component: 400 - total flux cleaned = -0.00944148 Jy ! Component: 450 - total flux cleaned = -0.00988607 Jy ! Component: 500 - total flux cleaned = -0.0105418 Jy ! Component: 550 - total flux cleaned = -0.0109002 Jy ! Component: 600 - total flux cleaned = -0.0111829 Jy ! Component: 650 - total flux cleaned = -0.0116723 Jy ! Component: 700 - total flux cleaned = -0.0118797 Jy ! Component: 750 - total flux cleaned = -0.0122221 Jy ! Component: 800 - total flux cleaned = -0.0125603 Jy ! Component: 850 - total flux cleaned = -0.0131633 Jy ! Component: 900 - total flux cleaned = -0.0135606 Jy ! Component: 950 - total flux cleaned = -0.013954 Jy ! Component: 1000 - total flux cleaned = -0.0142798 Jy ! Component: 1050 - total flux cleaned = -0.0146667 Jy ! Component: 1100 - total flux cleaned = -0.0149869 Jy ! Component: 1150 - total flux cleaned = -0.0154319 Jy ! Component: 1200 - total flux cleaned = -0.0158732 Jy ! Component: 1250 - total flux cleaned = -0.0161237 Jy ! Component: 1300 - total flux cleaned = -0.0167456 Jy ! Component: 1350 - total flux cleaned = -0.0168075 Jy ! Component: 1400 - total flux cleaned = -0.0172994 Jy ! Component: 1450 - total flux cleaned = -0.0176046 Jy ! Component: 1500 - total flux cleaned = -0.0179083 Jy ! Component: 1550 - total flux cleaned = -0.018391 Jy ! Component: 1600 - total flux cleaned = -0.0186911 Jy ! Component: 1650 - total flux cleaned = -0.0189298 Jy ! Component: 1700 - total flux cleaned = -0.019286 Jy ! Component: 1750 - total flux cleaned = -0.0196405 Jy ! Component: 1800 - total flux cleaned = -0.0198754 Jy ! Component: 1850 - total flux cleaned = -0.020226 Jy ! Component: 1900 - total flux cleaned = -0.0203422 Jy ! Component: 1950 - total flux cleaned = -0.0207478 Jy ! Component: 2000 - total flux cleaned = -0.0209786 Jy ! Component: 2050 - total flux cleaned = -0.021323 Jy ! Component: 2100 - total flux cleaned = -0.0216085 Jy ! Component: 2150 - total flux cleaned = -0.0218362 Jy ! Component: 2200 - total flux cleaned = -0.0220627 Jy ! Component: 2250 - total flux cleaned = -0.0222882 Jy ! Component: 2300 - total flux cleaned = -0.022625 Jy ! Component: 2350 - total flux cleaned = -0.0227368 Jy ! Component: 2400 - total flux cleaned = -0.0231263 Jy ! Component: 2450 - total flux cleaned = -0.0234031 Jy ! Component: 2500 - total flux cleaned = -0.0234579 Jy ! Component: 2550 - total flux cleaned = -0.0237329 Jy ! Component: 2600 - total flux cleaned = -0.0240067 Jy ! Component: 2650 - total flux cleaned = -0.0242797 Jy ! Component: 2700 - total flux cleaned = -0.024388 Jy ! Component: 2750 - total flux cleaned = -0.0246047 Jy ! Component: 2800 - total flux cleaned = -0.0248205 Jy ! Component: 2850 - total flux cleaned = -0.0250893 Jy ! Component: 2900 - total flux cleaned = -0.0253037 Jy ! Component: 2950 - total flux cleaned = -0.0255172 Jy ! Component: 3000 - total flux cleaned = -0.0257299 Jy ! Component: 3050 - total flux cleaned = -0.0259418 Jy ! Component: 3100 - total flux cleaned = -0.0261001 Jy ! Component: 3150 - total flux cleaned = -0.0262054 Jy ! Component: 3200 - total flux cleaned = -0.0264153 Jy ! Component: 3250 - total flux cleaned = -0.0266246 Jy ! Component: 3300 - total flux cleaned = -0.0269374 Jy ! Component: 3350 - total flux cleaned = -0.0269375 Jy ! Component: 3400 - total flux cleaned = -0.0270931 Jy ! Component: 3450 - total flux cleaned = -0.0272999 Jy ! Component: 3500 - total flux cleaned = -0.0275572 Jy ! Component: 3550 - total flux cleaned = -0.0277113 Jy ! Component: 3600 - total flux cleaned = -0.0278647 Jy ! Component: 3650 - total flux cleaned = -0.0279668 Jy ! Component: 3700 - total flux cleaned = -0.0281196 Jy ! Component: 3750 - total flux cleaned = -0.0283733 Jy ! Component: 3800 - total flux cleaned = -0.0285252 Jy ! Component: 3850 - total flux cleaned = -0.0286765 Jy ! Component: 3900 - total flux cleaned = -0.0287267 Jy ! Component: 3950 - total flux cleaned = -0.0289775 Jy ! Component: 4000 - total flux cleaned = -0.0292772 Jy ! Component: 4050 - total flux cleaned = -0.0292773 Jy ! Total flux subtracted in 4096 components = -0.0294266 Jy ! Clean residual min=-0.002487 max=0.003432 Jy/beam ! Clean residual mean=-0.000000 rms=0.000963 Jy/beam ! Combined flux in latest and established models = 0.176702 Jy keep ! Adding 269 model components to the UV plane model. ! The established model now contains 336 components and 0.176702 Jy ![Exited script file: muppet] wmap "J1300+1206_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.767 x 9.397 at -8.886 degrees (North through East) ! Clean map min=-0.0083358 max=0.19375 Jy/beam ! Writing clean map to FITS file: J1300+1206_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.193752 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000959309 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.48536 1.48536 2.97073 5.94146 11.8829 23.7658 47.5316 95.0633 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0028 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.193 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.767 x 9.397 at -8.886 degrees (North through East) ! Clean map min=-0.0083358 max=0.19375 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1300+1206_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:07:07 2019