! Started logfile: J1300+0828_S_2017_05_27_pus_uvs.log on Fri May 3 11:06:58 2019 obs J1300+0828_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1300+0828_S_2017_05_27_pus_uva.fits ! AN table 1: 128 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.85191 visibilities/baseline/integration-bin. ! Found source: J1300+0828 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 19628 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1300+0828_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 179 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 241 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 179 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 741 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.931089Jy sigma=0.030010 ! Fit after self-cal, rms=0.920682Jy sigma=0.029997 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.877 mas, bmaj=7.279 mas, bpa=-1.98 degrees ! Estimated noise=785.239 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0499515 Jy ! Component: 100 - total flux cleaned = 0.0594989 Jy ! Total flux subtracted in 100 components = 0.0594989 Jy ! Clean residual min=-0.011424 max=0.012805 Jy/beam ! Clean residual mean=-0.000013 rms=0.003434 Jy/beam ! Combined flux in latest and established models = 0.0594989 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0594989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105907Jy sigma=0.001829 ! Fit after self-cal, rms=0.105945Jy sigma=0.001803 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.444 mas, bmaj=8.273 mas, bpa=-2.689 degrees ! Estimated noise=552.599 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00282327 Jy ! Component: 100 - total flux cleaned = 0.00331529 Jy ! Component: 150 - total flux cleaned = 0.00340197 Jy ! Component: 200 - total flux cleaned = 0.0035571 Jy ! Total flux subtracted in 200 components = 0.0035571 Jy ! Clean residual min=-0.010451 max=0.012362 Jy/beam ! Clean residual mean=-0.000003 rms=0.003159 Jy/beam ! Combined flux in latest and established models = 0.063056 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 13 components and 0.063056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105071Jy sigma=0.001883 ! Fit after self-cal, rms=0.105029Jy sigma=0.001883 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.82 HN 0.96 KP 0.88 ! LA 0.92 MK 1.06 NL 0.88 OV 21.05 ! PT 0.94 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.44 FD 0.86 HN 0.96 KP 0.82 ! LA 0.81 MK 0.99 NL 0.94 OV 0.85 ! PT 0.85 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.66 FD 0.91 HN 0.93 KP 0.83 ! LA 0.83 MK 0.98 NL 0.94 OV 0.82 ! PT 0.87 SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.88 HN 0.88 KP 1.00* ! LA 0.79 MK 0.89 NL 1.00* OV 1.00* ! PT 0.87 SC 1.00* ! ! ! Fit before self-cal, rms=0.105029Jy sigma=0.001883 ! Fit after self-cal, rms=0.504180Jy sigma=0.000706 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.391 mas, bmaj=8.104 mas, bpa=-4.922 degrees ! Estimated noise=589.163 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.5, -11.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00688795 Jy ! Component: 100 - total flux cleaned = 0.0105497 Jy ! Component: 150 - total flux cleaned = 0.0116637 Jy ! Component: 200 - total flux cleaned = 0.0121472 Jy ! Total flux subtracted in 200 components = 0.0121472 Jy ! Clean residual min=-0.003813 max=0.003080 Jy/beam ! Clean residual mean=-0.000010 rms=0.000812 Jy/beam ! Combined flux in latest and established models = 0.0752032 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 50 components and 0.0752032 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.503110Jy sigma=0.000704 ! Fit after self-cal, rms=0.503813Jy sigma=0.000696 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.503813Jy sigma=0.000696 ! Fit after self-cal, rms=0.668451Jy sigma=0.000681 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.38 mas, bmaj=8.036 mas, bpa=-4.982 degrees ! Estimated noise=598.288 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00325864 Jy ! Component: 100 - total flux cleaned = 0.00507558 Jy ! Component: 150 - total flux cleaned = 0.00574656 Jy ! Component: 200 - total flux cleaned = 0.00611341 Jy ! Total flux subtracted in 200 components = 0.00611341 Jy ! Clean residual min=-0.002582 max=0.002026 Jy/beam ! Clean residual mean=-0.000005 rms=0.000595 Jy/beam ! Combined flux in latest and established models = 0.0813166 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 68 components and 0.0813166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.668026Jy sigma=0.000681 ! Fit after self-cal, rms=0.668018Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000937958 Jy ! Component: 100 - total flux cleaned = 0.00105626 Jy ! Component: 150 - total flux cleaned = 0.00116173 Jy ! Component: 200 - total flux cleaned = 0.00122439 Jy ! Total flux subtracted in 200 components = 0.00122439 Jy ! Clean residual min=-0.002502 max=0.002011 Jy/beam ! Clean residual mean=-0.000005 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.082541 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 84 components and 0.082541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.667914Jy sigma=0.000680 ! Fit after self-cal, rms=0.667863Jy sigma=0.000680 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.667863Jy sigma=0.000680 ! Fit after self-cal, rms=0.715216Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.353 mas, bmaj=8.002 mas, bpa=-4.982 degrees ! Estimated noise=604.191 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137772 Jy ! Component: 100 - total flux cleaned = 0.00226289 Jy ! Component: 150 - total flux cleaned = 0.00284161 Jy ! Component: 200 - total flux cleaned = 0.00303417 Jy ! Total flux subtracted in 200 components = 0.00303417 Jy ! Clean residual min=-0.001904 max=0.001806 Jy/beam ! Clean residual mean=-0.000003 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.0855752 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 102 components and 0.0855752 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.715143Jy sigma=0.000669 ! Fit after self-cal, rms=0.715143Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000294622 Jy ! Component: 100 - total flux cleaned = 0.000392857 Jy ! Component: 150 - total flux cleaned = 0.000392334 Jy ! Component: 200 - total flux cleaned = 0.000392007 Jy ! Total flux subtracted in 200 components = 0.000392007 Jy ! Clean residual min=-0.001884 max=0.001757 Jy/beam ! Clean residual mean=-0.000003 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.0859672 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 113 components and 0.0859672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.715134Jy sigma=0.000668 ! Fit after self-cal, rms=0.715135Jy sigma=0.000668 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.715135Jy sigma=0.000668 ! Fit after self-cal, rms=0.780467Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.436 mas, bmaj=11.92 mas, bpa=-6.875 degrees ! Estimated noise=749.033 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143689 Jy ! Component: 100 - total flux cleaned = 0.00214171 Jy ! Component: 150 - total flux cleaned = 0.00238246 Jy ! Component: 200 - total flux cleaned = 0.00247992 Jy ! Total flux subtracted in 200 components = 0.00247992 Jy ! Clean residual min=-0.002524 max=0.002053 Jy/beam ! Clean residual mean=-0.000005 rms=0.000662 Jy/beam ! Combined flux in latest and established models = 0.0884471 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 134 components and 0.0884471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.780381Jy sigma=0.000668 ! Fit after self-cal, rms=0.780379Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000100161 Jy ! Component: 100 - total flux cleaned = 0.000154802 Jy ! Component: 150 - total flux cleaned = 0.000202507 Jy ! Component: 200 - total flux cleaned = 0.000245416 Jy ! Total flux subtracted in 200 components = 0.000245416 Jy ! Clean residual min=-0.002525 max=0.002055 Jy/beam ! Clean residual mean=-0.000006 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.0886925 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 140 components and 0.0886925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.780373Jy sigma=0.000668 ! Fit after self-cal, rms=0.780374Jy sigma=0.000668 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.332 mas, bmaj=7.96 mas, bpa=-4.973 degrees ! Estimated noise=612.52 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.332 x 7.96 at -4.973 degrees (North through East) ! Clean map min=-0.0022065 max=0.072581 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.829 mas, bmaj=7.039 mas, bpa=-4.662 degrees ! Estimated noise=861.468 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0555285 Jy ! Component: 100 - total flux cleaned = 0.0689591 Jy ! Component: 150 - total flux cleaned = 0.075973 Jy ! Component: 200 - total flux cleaned = 0.0804465 Jy ! Total flux subtracted in 200 components = 0.0804465 Jy ! Clean residual min=-0.003176 max=0.002768 Jy/beam ! Clean residual mean=-0.000002 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.0804465 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0804465 Jy ! Inverting map and beam ! Estimated beam: bmin=3.332 mas, bmaj=7.96 mas, bpa=-4.973 degrees ! Estimated noise=612.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00358877 Jy ! Component: 100 - total flux cleaned = 0.00590634 Jy ! Component: 150 - total flux cleaned = 0.00704327 Jy ! Component: 200 - total flux cleaned = 0.0074683 Jy ! Total flux subtracted in 200 components = 0.0074683 Jy ! Clean residual min=-0.001937 max=0.001690 Jy/beam ! Clean residual mean=-0.000003 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.0879148 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 50 components and 0.0879148 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.436 mas, bmaj=11.92 mas, bpa=-6.875 degrees ! Estimated noise=749.033 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000972184 Jy ! Component: 100 - total flux cleaned = 0.00121337 Jy ! Component: 150 - total flux cleaned = 0.00124653 Jy ! Component: 200 - total flux cleaned = 0.00127235 Jy ! Total flux subtracted in 200 components = 0.00127235 Jy ! Clean residual min=-0.002609 max=0.002079 Jy/beam ! Clean residual mean=-0.000006 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.0891872 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.16923e-05 Jy ! Component: 100 - total flux cleaned = 2.14345e-05 Jy ! Component: 150 - total flux cleaned = 4.40312e-06 Jy ! Component: 200 - total flux cleaned = -2.73404e-05 Jy ! Total flux subtracted in 200 components = -2.73404e-05 Jy ! Clean residual min=-0.002616 max=0.002067 Jy/beam ! Clean residual mean=-0.000006 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 0.0891598 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 92 components and 0.0891598 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.332 mas, bmaj=7.96 mas, bpa=-4.973 degrees ! Estimated noise=612.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000156138 Jy ! Component: 100 - total flux cleaned = -4.48518e-05 Jy ! Component: 150 - total flux cleaned = -4.29207e-05 Jy ! Component: 200 - total flux cleaned = -1.99513e-05 Jy ! Total flux subtracted in 200 components = -1.99513e-05 Jy ! Clean residual min=-0.001957 max=0.001707 Jy/beam ! Clean residual mean=-0.000003 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.0891399 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 108 components and 0.0891399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.780389Jy sigma=0.000668 ! Fit after self-cal, rms=0.780387Jy sigma=0.000668 wmodel J1300+0828_S_2017_05_27_pus_map.mod ! Writing 108 model components to file: J1300+0828_S_2017_05_27_pus_map.mod wobs J1300+0828_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1300+0828_S_2017_05_27_pus_uvs.fits wwins J1300+0828_S_2017_05_27_pus_map.win ! wwins: Wrote 2 windows to J1300+0828_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000879312 Jy ! Component: 100 - total flux cleaned = -0.00143362 Jy ! Component: 150 - total flux cleaned = -0.0015878 Jy ! Component: 200 - total flux cleaned = -0.00173568 Jy ! Component: 250 - total flux cleaned = -0.00176398 Jy ! Component: 300 - total flux cleaned = -0.00179135 Jy ! Component: 350 - total flux cleaned = -0.00179144 Jy ! Component: 400 - total flux cleaned = -0.00184488 Jy ! Component: 450 - total flux cleaned = -0.00192245 Jy ! Component: 500 - total flux cleaned = -0.00189694 Jy ! Component: 550 - total flux cleaned = -0.00194702 Jy ! Component: 600 - total flux cleaned = -0.00197186 Jy ! Component: 650 - total flux cleaned = -0.00197233 Jy ! Component: 700 - total flux cleaned = -0.00199658 Jy ! Component: 750 - total flux cleaned = -0.00199659 Jy ! Component: 800 - total flux cleaned = -0.00192688 Jy ! Component: 850 - total flux cleaned = -0.00185826 Jy ! Component: 900 - total flux cleaned = -0.00179057 Jy ! Component: 950 - total flux cleaned = -0.00170127 Jy ! Component: 1000 - total flux cleaned = -0.00167909 Jy ! Component: 1050 - total flux cleaned = -0.00159138 Jy ! Component: 1100 - total flux cleaned = -0.00150458 Jy ! Component: 1150 - total flux cleaned = -0.00144012 Jy ! Component: 1200 - total flux cleaned = -0.00139745 Jy ! Component: 1250 - total flux cleaned = -0.00129254 Jy ! Component: 1300 - total flux cleaned = -0.00120954 Jy ! Component: 1350 - total flux cleaned = -0.00112762 Jy ! Component: 1400 - total flux cleaned = -0.00110743 Jy ! Component: 1450 - total flux cleaned = -0.00102654 Jy ! Component: 1500 - total flux cleaned = -0.00102648 Jy ! Component: 1550 - total flux cleaned = -0.000967066 Jy ! Component: 1600 - total flux cleaned = -0.000927938 Jy ! Component: 1650 - total flux cleaned = -0.000869512 Jy ! Component: 1700 - total flux cleaned = -0.000792572 Jy ! Component: 1750 - total flux cleaned = -0.000792797 Jy ! Component: 1800 - total flux cleaned = -0.000754984 Jy ! Component: 1850 - total flux cleaned = -0.000773551 Jy ! Component: 1900 - total flux cleaned = -0.000680469 Jy ! Component: 1950 - total flux cleaned = -0.000698865 Jy ! Component: 2000 - total flux cleaned = -0.000588808 Jy ! Component: 2050 - total flux cleaned = -0.000570655 Jy ! Component: 2100 - total flux cleaned = -0.00048067 Jy ! Component: 2150 - total flux cleaned = -0.000462814 Jy ! Component: 2200 - total flux cleaned = -0.000445066 Jy ! Component: 2250 - total flux cleaned = -0.000409845 Jy ! Component: 2300 - total flux cleaned = -0.00042746 Jy ! Component: 2350 - total flux cleaned = -0.000409955 Jy ! Component: 2400 - total flux cleaned = -0.000340969 Jy ! Component: 2450 - total flux cleaned = -0.000323945 Jy ! Component: 2500 - total flux cleaned = -0.000323808 Jy ! Component: 2550 - total flux cleaned = -0.000256542 Jy ! Component: 2600 - total flux cleaned = -0.000206373 Jy ! Component: 2650 - total flux cleaned = -0.000255986 Jy ! Component: 2700 - total flux cleaned = -0.000288775 Jy ! Component: 2750 - total flux cleaned = -0.000239746 Jy ! Component: 2800 - total flux cleaned = -0.000223646 Jy ! Component: 2850 - total flux cleaned = -0.000288093 Jy ! Component: 2900 - total flux cleaned = -0.000256084 Jy ! Component: 2950 - total flux cleaned = -0.000192388 Jy ! Component: 3000 - total flux cleaned = -0.000271336 Jy ! Component: 3050 - total flux cleaned = -0.000318503 Jy ! Component: 3100 - total flux cleaned = -0.000318436 Jy ! Component: 3150 - total flux cleaned = -0.000333987 Jy ! Component: 3200 - total flux cleaned = -0.0003339 Jy ! Component: 3250 - total flux cleaned = -0.000395277 Jy ! Component: 3300 - total flux cleaned = -0.000349371 Jy ! Component: 3350 - total flux cleaned = -0.00039491 Jy ! Component: 3400 - total flux cleaned = -0.000364652 Jy ! Component: 3450 - total flux cleaned = -0.000349604 Jy ! Component: 3500 - total flux cleaned = -0.000409353 Jy ! Component: 3550 - total flux cleaned = -0.000379552 Jy ! Component: 3600 - total flux cleaned = -0.000379522 Jy ! Component: 3650 - total flux cleaned = -0.000306308 Jy ! Component: 3700 - total flux cleaned = -0.000335562 Jy ! Component: 3750 - total flux cleaned = -0.000335615 Jy ! Component: 3800 - total flux cleaned = -0.000422323 Jy ! Component: 3850 - total flux cleaned = -0.00037932 Jy ! Component: 3900 - total flux cleaned = -0.000407961 Jy ! Component: 3950 - total flux cleaned = -0.000422244 Jy ! Component: 4000 - total flux cleaned = -0.000379696 Jy ! Component: 4050 - total flux cleaned = -0.000435979 Jy ! Total flux subtracted in 4096 components = -0.000435963 Jy ! Clean residual min=-0.000902 max=0.000923 Jy/beam ! Clean residual mean=-0.000002 rms=0.000274 Jy/beam ! Combined flux in latest and established models = 0.0887039 Jy keep ! Adding 300 model components to the UV plane model. ! The established model now contains 408 components and 0.0887039 Jy ![Exited script file: muppet] wmap "J1300+0828_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.332 x 7.96 at -4.973 degrees (North through East) ! Clean map min=-0.0017863 max=0.073029 Jy/beam ! Writing clean map to FITS file: J1300+0828_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0730292 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000271487 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.11525 1.11525 2.23051 4.46101 8.92203 17.8441 35.6881 71.3762 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.073 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.332 x 7.96 at -4.973 degrees (North through East) ! Clean map min=-0.0017863 max=0.073029 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1300+0828_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:07:02 2019