! Started logfile: J1259+5140_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:13:52 2019 obs J1259+5140_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J1259+5140_S_2017_01_16_pus_uva.fits ! AN table 1: 173 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.784457 visibilities/baseline/integration-bin. ! Found source: J1259+5140 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 24428 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1259+5140_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 579 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.918733Jy sigma=0.008221 ! Fit after self-cal, rms=0.906044Jy sigma=0.008137 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.849 mas, bmaj=5.755 mas, bpa=21.94 degrees ! Estimated noise=961.573 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0747519 Jy ! Component: 100 - total flux cleaned = 0.0915836 Jy ! Total flux subtracted in 100 components = 0.0915836 Jy ! Clean residual min=-0.007847 max=0.028391 Jy/beam ! Clean residual mean=-0.000007 rms=0.002225 Jy/beam ! Combined flux in latest and established models = 0.0915836 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0915836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098100Jy sigma=0.000771 ! Fit after self-cal, rms=0.098064Jy sigma=0.000771 ! Inverting map ! Added new window around map position (-18.5, -7.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0223614 Jy ! Component: 100 - total flux cleaned = 0.0302793 Jy ! Total flux subtracted in 100 components = 0.0302793 Jy ! Clean residual min=-0.004990 max=0.009563 Jy/beam ! Clean residual mean=-0.000004 rms=0.001440 Jy/beam ! Combined flux in latest and established models = 0.121863 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 16 components and 0.121863 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092938Jy sigma=0.000712 ! Fit after self-cal, rms=0.092000Jy sigma=0.000703 ! Inverting map ! Added new window around map position (-9, -1.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113284 Jy ! Component: 100 - total flux cleaned = 0.0184515 Jy ! Total flux subtracted in 100 components = 0.0184515 Jy ! Clean residual min=-0.003865 max=0.004556 Jy/beam ! Clean residual mean=-0.000005 rms=0.001026 Jy/beam ! Combined flux in latest and established models = 0.140314 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 31 components and 0.140314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090245Jy sigma=0.000681 ! Fit after self-cal, rms=0.090128Jy sigma=0.000680 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.683 mas, bmaj=6.541 mas, bpa=23.08 degrees ! Estimated noise=544.656 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00870369 Jy ! Component: 100 - total flux cleaned = 0.0139698 Jy ! Component: 150 - total flux cleaned = 0.0174947 Jy ! Component: 200 - total flux cleaned = 0.0200077 Jy ! Total flux subtracted in 200 components = 0.0200077 Jy ! Clean residual min=-0.003005 max=0.003477 Jy/beam ! Clean residual mean=-0.000016 rms=0.000750 Jy/beam ! Combined flux in latest and established models = 0.160322 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 68 components and 0.160322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089283Jy sigma=0.000670 ! Fit after self-cal, rms=0.089184Jy sigma=0.000668 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.97 HN 1.00 KP 0.97 ! LA 1.00 MK 1.00* NL 0.89 OV 1.02 ! PT 0.93 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 1.00 KP 0.97 ! LA 0.98 MK 1.00* NL 1.00 OV 1.05 ! PT 0.94 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 1.03 HN 0.98 KP 1.03 ! LA 0.99 MK 1.00* NL 1.01 OV 0.95 ! PT 0.92 SC 0.97 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.02 HN 0.93 KP 1.00* ! LA 1.09 MK 1.00* NL 1.00* OV 0.93 ! PT 0.93 SC 0.95 ! ! ! Fit before self-cal, rms=0.089184Jy sigma=0.000668 ! Fit after self-cal, rms=0.087904Jy sigma=0.000664 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.692 mas, bmaj=6.551 mas, bpa=22.36 degrees ! Estimated noise=538.022 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-17.5, -17). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0031963 Jy ! Component: 100 - total flux cleaned = 0.00486083 Jy ! Component: 150 - total flux cleaned = 0.00547685 Jy ! Component: 200 - total flux cleaned = 0.00599316 Jy ! Total flux subtracted in 200 components = 0.00599316 Jy ! Clean residual min=-0.002080 max=0.002312 Jy/beam ! Clean residual mean=-0.000012 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.166315 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 107 components and 0.166315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087768Jy sigma=0.000663 ! Fit after self-cal, rms=0.087832Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087832Jy sigma=0.000663 ! Fit after self-cal, rms=0.083232Jy sigma=0.000661 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.693 mas, bmaj=6.538 mas, bpa=22.18 degrees ! Estimated noise=537.753 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114776 Jy ! Component: 100 - total flux cleaned = 0.00172649 Jy ! Component: 150 - total flux cleaned = 0.00209424 Jy ! Component: 200 - total flux cleaned = 0.00231262 Jy ! Total flux subtracted in 200 components = 0.00231262 Jy ! Clean residual min=-0.001794 max=0.001932 Jy/beam ! Clean residual mean=-0.000009 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.168628 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 127 components and 0.168628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083194Jy sigma=0.000661 ! Fit after self-cal, rms=0.083156Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-12, 26). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016611 Jy ! Component: 100 - total flux cleaned = 0.00212633 Jy ! Component: 150 - total flux cleaned = 0.00245625 Jy ! Component: 200 - total flux cleaned = 0.00269342 Jy ! Total flux subtracted in 200 components = 0.00269342 Jy ! Clean residual min=-0.001567 max=0.001574 Jy/beam ! Clean residual mean=-0.000008 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.171321 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 159 components and 0.171321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083112Jy sigma=0.000660 ! Fit after self-cal, rms=0.083104Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083104Jy sigma=0.000660 ! Fit after self-cal, rms=0.082914Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.691 mas, bmaj=6.53 mas, bpa=22.12 degrees ! Estimated noise=537.138 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100939 Jy ! Component: 100 - total flux cleaned = 0.00142885 Jy ! Component: 150 - total flux cleaned = 0.00181782 Jy ! Component: 200 - total flux cleaned = 0.00209035 Jy ! Total flux subtracted in 200 components = 0.00209035 Jy ! Clean residual min=-0.001481 max=0.001464 Jy/beam ! Clean residual mean=-0.000007 rms=0.000377 Jy/beam ! Combined flux in latest and established models = 0.173412 Jy selfcal ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 183 components and 0.173412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082893Jy sigma=0.000660 ! Fit after self-cal, rms=0.082889Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000382732 Jy ! Component: 100 - total flux cleaned = 0.000567105 Jy ! Component: 150 - total flux cleaned = 0.000693732 Jy ! Component: 200 - total flux cleaned = 0.000810648 Jy ! Total flux subtracted in 200 components = 0.000810648 Jy ! Clean residual min=-0.001473 max=0.001446 Jy/beam ! Clean residual mean=-0.000006 rms=0.000368 Jy/beam ! Combined flux in latest and established models = 0.174222 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 196 components and 0.174222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082879Jy sigma=0.000660 ! Fit after self-cal, rms=0.082877Jy sigma=0.000660 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082877Jy sigma=0.000660 ! Fit after self-cal, rms=0.082798Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.58 mas, bmaj=9.123 mas, bpa=3.84 degrees ! Estimated noise=621.736 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000792681 Jy ! Component: 100 - total flux cleaned = 0.00118412 Jy ! Component: 150 - total flux cleaned = 0.00142506 Jy ! Component: 200 - total flux cleaned = 0.00156681 Jy ! Total flux subtracted in 200 components = 0.00156681 Jy ! Clean residual min=-0.001982 max=0.001887 Jy/beam ! Clean residual mean=-0.000012 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.175789 Jy selfcal ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 235 components and 0.175789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082791Jy sigma=0.000660 ! Fit after self-cal, rms=0.082792Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000202692 Jy ! Component: 100 - total flux cleaned = 0.000321389 Jy ! Component: 150 - total flux cleaned = 0.000382911 Jy ! Component: 200 - total flux cleaned = 0.000440306 Jy ! Total flux subtracted in 200 components = 0.000440306 Jy ! Clean residual min=-0.001956 max=0.001831 Jy/beam ! Clean residual mean=-0.000011 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.17623 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 244 components and 0.17623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082788Jy sigma=0.000660 ! Fit after self-cal, rms=0.082788Jy sigma=0.000660 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.689 mas, bmaj=6.523 mas, bpa=22.09 degrees ! Estimated noise=536.967 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.689 x 6.523 at 22.09 degrees (North through East) ! Clean map min=-0.0013869 max=0.090067 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.86 mas, bmaj=5.723 mas, bpa=20.91 degrees ! Estimated noise=942.766 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.074525 Jy ! Component: 100 - total flux cleaned = 0.103285 Jy ! Component: 150 - total flux cleaned = 0.119279 Jy ! Component: 200 - total flux cleaned = 0.129917 Jy ! Total flux subtracted in 200 components = 0.129917 Jy ! Clean residual min=-0.003918 max=0.005885 Jy/beam ! Clean residual mean=-0.000004 rms=0.001047 Jy/beam ! Combined flux in latest and established models = 0.129917 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.129917 Jy ! Inverting map and beam ! Estimated beam: bmin=4.689 mas, bmaj=6.523 mas, bpa=22.09 degrees ! Estimated noise=536.967 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0112119 Jy ! Component: 100 - total flux cleaned = 0.0185914 Jy ! Component: 150 - total flux cleaned = 0.0238461 Jy ! Component: 200 - total flux cleaned = 0.0278723 Jy ! Total flux subtracted in 200 components = 0.0278723 Jy ! Clean residual min=-0.002470 max=0.002378 Jy/beam ! Clean residual mean=-0.000012 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.15779 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 64 components and 0.15779 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.58 mas, bmaj=9.123 mas, bpa=3.84 degrees ! Estimated noise=621.736 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00468034 Jy ! Component: 100 - total flux cleaned = 0.00792784 Jy ! Component: 150 - total flux cleaned = 0.0103445 Jy ! Component: 200 - total flux cleaned = 0.0121975 Jy ! Total flux subtracted in 200 components = 0.0121975 Jy ! Clean residual min=-0.002130 max=0.001942 Jy/beam ! Clean residual mean=-0.000016 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.169987 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146238 Jy ! Component: 100 - total flux cleaned = 0.00237129 Jy ! Component: 150 - total flux cleaned = 0.00305756 Jy ! Component: 200 - total flux cleaned = 0.00361336 Jy ! Total flux subtracted in 200 components = 0.00361336 Jy ! Clean residual min=-0.002027 max=0.001790 Jy/beam ! Clean residual mean=-0.000013 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.1736 Jy ! Adding 131 model components to the UV plane model. ! The established model now contains 182 components and 0.1736 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.689 mas, bmaj=6.523 mas, bpa=22.09 degrees ! Estimated noise=536.967 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000866674 Jy ! Component: 100 - total flux cleaned = 0.00127914 Jy ! Component: 150 - total flux cleaned = 0.00144801 Jy ! Component: 200 - total flux cleaned = 0.0015785 Jy ! Total flux subtracted in 200 components = 0.0015785 Jy ! Clean residual min=-0.001547 max=0.001475 Jy/beam ! Clean residual mean=-0.000006 rms=0.000363 Jy/beam ! Combined flux in latest and established models = 0.175179 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 215 components and 0.175179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082806Jy sigma=0.000660 ! Fit after self-cal, rms=0.082800Jy sigma=0.000660 wmodel J1259+5140_S_2017_01_16_pus_map.mod ! Writing 215 model components to file: J1259+5140_S_2017_01_16_pus_map.mod wobs J1259+5140_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J1259+5140_S_2017_01_16_pus_uvs.fits wwins J1259+5140_S_2017_01_16_pus_map.win ! wwins: Wrote 5 windows to J1259+5140_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000417586 Jy ! Component: 100 - total flux cleaned = -0.000519645 Jy ! Component: 150 - total flux cleaned = -0.000662569 Jy ! Component: 200 - total flux cleaned = -0.000752235 Jy ! Component: 250 - total flux cleaned = -0.000839202 Jy ! Component: 300 - total flux cleaned = -0.000964761 Jy ! Component: 350 - total flux cleaned = -0.00100538 Jy ! Component: 400 - total flux cleaned = -0.00112285 Jy ! Component: 450 - total flux cleaned = -0.00121752 Jy ! Component: 500 - total flux cleaned = -0.00129123 Jy ! Component: 550 - total flux cleaned = -0.00132725 Jy ! Component: 600 - total flux cleaned = -0.00136236 Jy ! Component: 650 - total flux cleaned = -0.00143133 Jy ! Component: 700 - total flux cleaned = -0.00149909 Jy ! Component: 750 - total flux cleaned = -0.00153239 Jy ! Component: 800 - total flux cleaned = -0.0015488 Jy ! Component: 850 - total flux cleaned = -0.00162833 Jy ! Component: 900 - total flux cleaned = -0.00165964 Jy ! Component: 950 - total flux cleaned = -0.00172113 Jy ! Component: 1000 - total flux cleaned = -0.00175124 Jy ! Component: 1050 - total flux cleaned = -0.00178122 Jy ! Component: 1100 - total flux cleaned = -0.00184013 Jy ! Component: 1150 - total flux cleaned = -0.00188355 Jy ! Component: 1200 - total flux cleaned = -0.00189796 Jy ! Component: 1250 - total flux cleaned = -0.00195458 Jy ! Component: 1300 - total flux cleaned = -0.00201043 Jy ! Component: 1350 - total flux cleaned = -0.00203794 Jy ! Component: 1400 - total flux cleaned = -0.00207875 Jy ! Component: 1450 - total flux cleaned = -0.00210568 Jy ! Component: 1500 - total flux cleaned = -0.00215892 Jy ! Component: 1550 - total flux cleaned = -0.00219815 Jy ! Component: 1600 - total flux cleaned = -0.0021981 Jy ! Component: 1650 - total flux cleaned = -0.00219795 Jy ! Component: 1700 - total flux cleaned = -0.00222316 Jy ! Component: 1750 - total flux cleaned = -0.00222319 Jy ! Component: 1800 - total flux cleaned = -0.00219836 Jy ! Component: 1850 - total flux cleaned = -0.00224765 Jy ! Component: 1900 - total flux cleaned = -0.00225968 Jy ! Component: 1950 - total flux cleaned = -0.00221147 Jy ! Component: 2000 - total flux cleaned = -0.00229521 Jy ! Component: 2050 - total flux cleaned = -0.00229504 Jy ! Component: 2100 - total flux cleaned = -0.00230688 Jy ! Component: 2150 - total flux cleaned = -0.00234161 Jy ! Component: 2200 - total flux cleaned = -0.00235295 Jy ! Component: 2250 - total flux cleaned = -0.00235293 Jy ! Component: 2300 - total flux cleaned = -0.00237556 Jy ! Component: 2350 - total flux cleaned = -0.002398 Jy ! Component: 2400 - total flux cleaned = -0.0024092 Jy ! Component: 2450 - total flux cleaned = -0.00247539 Jy ! Component: 2500 - total flux cleaned = -0.00248638 Jy ! Component: 2550 - total flux cleaned = -0.00249732 Jy ! Component: 2600 - total flux cleaned = -0.00254052 Jy ! Component: 2650 - total flux cleaned = -0.00257267 Jy ! Component: 2700 - total flux cleaned = -0.00262575 Jy ! Component: 2750 - total flux cleaned = -0.00264675 Jy ! Component: 2800 - total flux cleaned = -0.00263622 Jy ! Component: 2850 - total flux cleaned = -0.0026778 Jy ! Component: 2900 - total flux cleaned = -0.00273954 Jy ! Component: 2950 - total flux cleaned = -0.00275988 Jy ! Component: 3000 - total flux cleaned = -0.00278029 Jy ! Component: 3050 - total flux cleaned = -0.00287119 Jy ! Component: 3100 - total flux cleaned = -0.00285119 Jy ! Component: 3150 - total flux cleaned = -0.00293068 Jy ! Component: 3200 - total flux cleaned = -0.00297022 Jy ! Component: 3250 - total flux cleaned = -0.00301924 Jy ! Component: 3300 - total flux cleaned = -0.00304848 Jy ! Component: 3350 - total flux cleaned = -0.00301952 Jy ! Component: 3400 - total flux cleaned = -0.00308675 Jy ! Component: 3450 - total flux cleaned = -0.00306761 Jy ! Component: 3500 - total flux cleaned = -0.00307702 Jy ! Component: 3550 - total flux cleaned = -0.00314289 Jy ! Component: 3600 - total flux cleaned = -0.00310554 Jy ! Component: 3650 - total flux cleaned = -0.00312419 Jy ! Component: 3700 - total flux cleaned = -0.00312418 Jy ! Component: 3750 - total flux cleaned = -0.00314253 Jy ! Component: 3800 - total flux cleaned = -0.00315175 Jy ! Component: 3850 - total flux cleaned = -0.00318811 Jy ! Component: 3900 - total flux cleaned = -0.00318806 Jy ! Component: 3950 - total flux cleaned = -0.00320601 Jy ! Component: 4000 - total flux cleaned = -0.00320602 Jy ! Component: 4050 - total flux cleaned = -0.00318825 Jy ! Total flux subtracted in 4096 components = -0.00317942 Jy ! Clean residual min=-0.000490 max=0.000558 Jy/beam ! Clean residual mean=-0.000001 rms=0.000168 Jy/beam ! Combined flux in latest and established models = 0.172 Jy keep ! Adding 295 model components to the UV plane model. ! The established model now contains 510 components and 0.172 Jy ![Exited script file: muppet] wmap "J1259+5140_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.689 x 6.523 at 22.09 degrees (North through East) ! Clean map min=-0.0010236 max=0.089352 Jy/beam ! Writing clean map to FITS file: J1259+5140_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0893523 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00016764 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.562852 0.562852 1.1257 2.25141 4.50282 9.00564 18.0113 36.0225 72.0451 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.089 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.689 x 6.523 at 22.09 degrees (North through East) ! Clean map min=-0.0010236 max=0.089352 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1259+5140_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:13:58 2019