! Started logfile: J1258+0038_S_2017_05_27_pus_uvs.log on Fri May 3 11:06:53 2019 obs J1258+0038_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1258+0038_S_2017_05_27_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.969201 visibilities/baseline/integration-bin. ! Found source: J1258+0038 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 19888 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1258+0038_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 83 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 592 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.932427Jy sigma=0.061181 ! Fit after self-cal, rms=0.924956Jy sigma=0.060984 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.194 mas, bmaj=6.456 mas, bpa=0.5194 degrees ! Estimated noise=336.053 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.022947 Jy ! Component: 100 - total flux cleaned = 0.0312503 Jy ! Total flux subtracted in 100 components = 0.0312503 Jy ! Clean residual min=-0.008560 max=0.013677 Jy/beam ! Clean residual mean=-0.000038 rms=0.002517 Jy/beam ! Combined flux in latest and established models = 0.0312503 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0312503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110022Jy sigma=0.001666 ! Fit after self-cal, rms=0.109813Jy sigma=0.001659 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.671 mas, bmaj=7.312 mas, bpa=1.094 degrees ! Estimated noise=276.378 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0123236 Jy ! Component: 100 - total flux cleaned = 0.0160517 Jy ! Component: 150 - total flux cleaned = 0.0154831 Jy ! Component: 200 - total flux cleaned = 0.0149942 Jy ! Total flux subtracted in 200 components = 0.0149942 Jy ! Clean residual min=-0.010658 max=0.009903 Jy/beam ! Clean residual mean=-0.000122 rms=0.002902 Jy/beam ! Combined flux in latest and established models = 0.0462444 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 22 components and 0.0462444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104279Jy sigma=0.002015 ! Fit after self-cal, rms=0.102988Jy sigma=0.002010 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 9.61 FD 0.63 HN 0.67 KP 0.71 ! LA 0.70 MK 0.73 NL 0.65 OV 0.68 ! PT 0.75 SC 0.68 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.48 FD 0.62 HN 0.72 KP 0.67 ! LA 0.68 MK 0.70 NL 0.78 OV 0.69 ! PT 0.73 SC 0.72 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 9.08 FD 0.71 HN 0.75 KP 0.72 ! LA 0.72 MK 0.83 NL 0.76 OV 0.75 ! PT 0.74 SC 0.79 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.82 HN 0.86 KP 1.00* ! LA 25.37 MK 0.82 NL 1.00* OV 1.00* ! PT 0.83 SC 1.00* ! ! ! Fit before self-cal, rms=0.102988Jy sigma=0.002010 ! Fit after self-cal, rms=0.501345Jy sigma=0.000740 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.36 mas, bmaj=8.122 mas, bpa=-3.19 degrees ! Estimated noise=366.959 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139508 Jy ! Component: 100 - total flux cleaned = 0.000961497 Jy ! Component: 150 - total flux cleaned = 0.000713557 Jy ! Component: 200 - total flux cleaned = 0.000608 Jy ! Total flux subtracted in 200 components = 0.000608 Jy ! Clean residual min=-0.002769 max=0.002464 Jy/beam ! Clean residual mean=-0.000003 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.0468524 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 30 components and 0.0468524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.500137Jy sigma=0.000741 ! Fit after self-cal, rms=0.500639Jy sigma=0.000711 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00184781 Jy ! Component: 100 - total flux cleaned = 0.0017665 Jy ! Component: 150 - total flux cleaned = 0.00197335 Jy ! Component: 200 - total flux cleaned = 0.00215884 Jy ! Total flux subtracted in 200 components = 0.00215884 Jy ! Clean residual min=-0.002207 max=0.002314 Jy/beam ! Clean residual mean=-0.000007 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.0490113 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 40 components and 0.0490113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.500009Jy sigma=0.000717 ! Fit after self-cal, rms=0.500013Jy sigma=0.000717 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.500013Jy sigma=0.000717 ! Fit after self-cal, rms=0.822604Jy sigma=0.000699 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.281 mas, bmaj=8.301 mas, bpa=-4.531 degrees ! Estimated noise=401.117 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00182766 Jy ! Component: 100 - total flux cleaned = 0.00182129 Jy ! Component: 150 - total flux cleaned = 0.00182041 Jy ! Component: 200 - total flux cleaned = 0.00192454 Jy ! Total flux subtracted in 200 components = 0.00192454 Jy ! Clean residual min=-0.003605 max=0.002209 Jy/beam ! Clean residual mean=0.000004 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 0.0509358 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 44 components and 0.0509358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.821277Jy sigma=0.000701 ! Fit after self-cal, rms=0.821367Jy sigma=0.000700 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000316686 Jy ! Component: 100 - total flux cleaned = -0.000125176 Jy ! Component: 150 - total flux cleaned = -4.04854e-05 Jy ! Component: 200 - total flux cleaned = 0.000188757 Jy ! Total flux subtracted in 200 components = 0.000188757 Jy ! Clean residual min=-0.002850 max=0.002142 Jy/beam ! Clean residual mean=0.000003 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.0511245 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 46 components and 0.0511245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.820670Jy sigma=0.000702 ! Fit after self-cal, rms=0.820677Jy sigma=0.000702 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.820677Jy sigma=0.000702 ! Fit after self-cal, rms=0.376577Jy sigma=0.000678 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.291 mas, bmaj=8.27 mas, bpa=-4.926 degrees ! Estimated noise=403.924 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000812481 Jy ! Component: 100 - total flux cleaned = 0.000862863 Jy ! Component: 150 - total flux cleaned = 0.000956566 Jy ! Component: 200 - total flux cleaned = 0.00107987 Jy ! Total flux subtracted in 200 components = 0.00107987 Jy ! Clean residual min=-0.001650 max=0.001529 Jy/beam ! Clean residual mean=0.000004 rms=0.000343 Jy/beam ! Combined flux in latest and established models = 0.0522044 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 52 components and 0.0522044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.376300Jy sigma=0.000678 ! Fit after self-cal, rms=0.376269Jy sigma=0.000677 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00035199 Jy ! Component: 100 - total flux cleaned = 0.000426185 Jy ! Component: 150 - total flux cleaned = 0.000459434 Jy ! Component: 200 - total flux cleaned = 0.0005205 Jy ! Total flux subtracted in 200 components = 0.0005205 Jy ! Clean residual min=-0.001650 max=0.001517 Jy/beam ! Clean residual mean=0.000004 rms=0.000338 Jy/beam ! Combined flux in latest and established models = 0.0527249 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 61 components and 0.0527249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.376095Jy sigma=0.000677 ! Fit after self-cal, rms=0.376095Jy sigma=0.000677 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.376095Jy sigma=0.000677 ! Fit after self-cal, rms=0.413584Jy sigma=0.000676 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.507 mas, bmaj=13.3 mas, bpa=-7.012 degrees ! Estimated noise=503.982 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000631937 Jy ! Component: 100 - total flux cleaned = 0.000725765 Jy ! Component: 150 - total flux cleaned = 0.00056876 Jy ! Component: 200 - total flux cleaned = 0.000498128 Jy ! Total flux subtracted in 200 components = 0.000498128 Jy ! Clean residual min=-0.001809 max=0.001788 Jy/beam ! Clean residual mean=0.000007 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.053223 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 66 components and 0.053223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.413313Jy sigma=0.000677 ! Fit after self-cal, rms=0.413309Jy sigma=0.000677 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000197248 Jy ! Component: 100 - total flux cleaned = -0.000134325 Jy ! Component: 150 - total flux cleaned = -0.000108387 Jy ! Component: 200 - total flux cleaned = -0.000134622 Jy ! Total flux subtracted in 200 components = -0.000134622 Jy ! Clean residual min=-0.001781 max=0.001773 Jy/beam ! Clean residual mean=0.000007 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.0530884 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 71 components and 0.0530884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.413189Jy sigma=0.000677 ! Fit after self-cal, rms=0.413186Jy sigma=0.000677 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.281 mas, bmaj=8.297 mas, bpa=-5.225 degrees ! Estimated noise=410.982 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.281 x 8.297 at -5.225 degrees (North through East) ! Clean map min=-0.0041117 max=0.056211 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.775 mas, bmaj=7.068 mas, bpa=-4.23 degrees ! Estimated noise=568.627 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0416725 Jy ! Component: 100 - total flux cleaned = 0.0510232 Jy ! Component: 150 - total flux cleaned = 0.0531628 Jy ! Component: 200 - total flux cleaned = 0.0533911 Jy ! Total flux subtracted in 200 components = 0.0533911 Jy ! Clean residual min=-0.002781 max=0.001914 Jy/beam ! Clean residual mean=0.000009 rms=0.000500 Jy/beam ! Combined flux in latest and established models = 0.0533911 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0533911 Jy ! Inverting map and beam ! Estimated beam: bmin=3.281 mas, bmaj=8.297 mas, bpa=-5.225 degrees ! Estimated noise=410.982 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000235383 Jy ! Component: 100 - total flux cleaned = -0.000442367 Jy ! Component: 150 - total flux cleaned = -0.000616752 Jy ! Component: 200 - total flux cleaned = -0.0005673 Jy ! Total flux subtracted in 200 components = -0.0005673 Jy ! Clean residual min=-0.001955 max=0.001373 Jy/beam ! Clean residual mean=0.000004 rms=0.000367 Jy/beam ! Combined flux in latest and established models = 0.0528238 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 29 components and 0.0528238 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.507 mas, bmaj=13.3 mas, bpa=-7.012 degrees ! Estimated noise=503.982 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00050822 Jy ! Component: 100 - total flux cleaned = -0.000511457 Jy ! Component: 150 - total flux cleaned = -0.000465958 Jy ! Component: 200 - total flux cleaned = -0.000467342 Jy ! Total flux subtracted in 200 components = -0.000467342 Jy ! Clean residual min=-0.001746 max=0.001755 Jy/beam ! Clean residual mean=0.000008 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.0523565 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.17616e-07 Jy ! Component: 100 - total flux cleaned = 3.49567e-05 Jy ! Component: 150 - total flux cleaned = 6.795e-05 Jy ! Component: 200 - total flux cleaned = 0.000128749 Jy ! Total flux subtracted in 200 components = 0.000128749 Jy ! Clean residual min=-0.001734 max=0.001739 Jy/beam ! Clean residual mean=0.000008 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.0524852 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 48 components and 0.0524852 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.281 mas, bmaj=8.297 mas, bpa=-5.225 degrees ! Estimated noise=410.982 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000185315 Jy ! Component: 100 - total flux cleaned = 0.0004506 Jy ! Component: 150 - total flux cleaned = 0.00057831 Jy ! Component: 200 - total flux cleaned = 0.000689406 Jy ! Total flux subtracted in 200 components = 0.000689406 Jy ! Clean residual min=-0.001850 max=0.001450 Jy/beam ! Clean residual mean=0.000004 rms=0.000354 Jy/beam ! Combined flux in latest and established models = 0.0531746 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 65 components and 0.0531746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.413098Jy sigma=0.000677 ! Fit after self-cal, rms=0.413095Jy sigma=0.000677 wmodel J1258+0038_S_2017_05_27_pus_map.mod ! Writing 65 model components to file: J1258+0038_S_2017_05_27_pus_map.mod wobs J1258+0038_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1258+0038_S_2017_05_27_pus_uvs.fits wwins J1258+0038_S_2017_05_27_pus_map.win ! wwins: Wrote 2 windows to J1258+0038_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000452028 Jy ! Component: 100 - total flux cleaned = -0.000605477 Jy ! Component: 150 - total flux cleaned = -0.000798363 Jy ! Component: 200 - total flux cleaned = -0.000913647 Jy ! Component: 250 - total flux cleaned = -0.000958694 Jy ! Component: 300 - total flux cleaned = -0.000980058 Jy ! Component: 350 - total flux cleaned = -0.000958403 Jy ! Component: 400 - total flux cleaned = -0.000856098 Jy ! Component: 450 - total flux cleaned = -0.000796343 Jy ! Component: 500 - total flux cleaned = -0.000796561 Jy ! Component: 550 - total flux cleaned = -0.000757726 Jy ! Component: 600 - total flux cleaned = -0.000757715 Jy ! Component: 650 - total flux cleaned = -0.000719999 Jy ! Component: 700 - total flux cleaned = -0.000701315 Jy ! Component: 750 - total flux cleaned = -0.000701152 Jy ! Component: 800 - total flux cleaned = -0.000718985 Jy ! Component: 850 - total flux cleaned = -0.00071903 Jy ! Component: 900 - total flux cleaned = -0.000771627 Jy ! Component: 950 - total flux cleaned = -0.000736798 Jy ! Component: 1000 - total flux cleaned = -0.000753846 Jy ! Component: 1050 - total flux cleaned = -0.00077079 Jy ! Component: 1100 - total flux cleaned = -0.000787497 Jy ! Component: 1150 - total flux cleaned = -0.000787334 Jy ! Component: 1200 - total flux cleaned = -0.000803778 Jy ! Component: 1250 - total flux cleaned = -0.000868866 Jy ! Component: 1300 - total flux cleaned = -0.000901028 Jy ! Component: 1350 - total flux cleaned = -0.000933124 Jy ! Component: 1400 - total flux cleaned = -0.000980636 Jy ! Component: 1450 - total flux cleaned = -0.00101189 Jy ! Component: 1500 - total flux cleaned = -0.00107364 Jy ! Component: 1550 - total flux cleaned = -0.00104303 Jy ! Component: 1600 - total flux cleaned = -0.00113437 Jy ! Component: 1650 - total flux cleaned = -0.00111928 Jy ! Component: 1700 - total flux cleaned = -0.00114916 Jy ! Component: 1750 - total flux cleaned = -0.00119374 Jy ! Component: 1800 - total flux cleaned = -0.00122329 Jy ! Component: 1850 - total flux cleaned = -0.00125254 Jy ! Component: 1900 - total flux cleaned = -0.00128163 Jy ! Component: 1950 - total flux cleaned = -0.00131044 Jy ! Component: 2000 - total flux cleaned = -0.00132475 Jy ! Component: 2050 - total flux cleaned = -0.00135307 Jy ! Component: 2100 - total flux cleaned = -0.00135317 Jy ! Component: 2150 - total flux cleaned = -0.00143686 Jy ! Component: 2200 - total flux cleaned = -0.00145068 Jy ! Component: 2250 - total flux cleaned = -0.00149195 Jy ! Component: 2300 - total flux cleaned = -0.00154648 Jy ! Component: 2350 - total flux cleaned = -0.00158718 Jy ! Component: 2400 - total flux cleaned = -0.00158729 Jy ! Component: 2450 - total flux cleaned = -0.00160079 Jy ! Component: 2500 - total flux cleaned = -0.00165401 Jy ! Component: 2550 - total flux cleaned = -0.00166726 Jy ! Component: 2600 - total flux cleaned = -0.00171983 Jy ! Component: 2650 - total flux cleaned = -0.0017719 Jy ! Component: 2700 - total flux cleaned = -0.00177179 Jy ! Component: 2750 - total flux cleaned = -0.00182336 Jy ! Component: 2800 - total flux cleaned = -0.00181051 Jy ! Component: 2850 - total flux cleaned = -0.00183604 Jy ! Component: 2900 - total flux cleaned = -0.00189941 Jy ! Component: 2950 - total flux cleaned = -0.00187422 Jy ! Component: 3000 - total flux cleaned = -0.00191176 Jy ! Component: 3050 - total flux cleaned = -0.00189924 Jy ! Component: 3100 - total flux cleaned = -0.00196121 Jy ! Component: 3150 - total flux cleaned = -0.00197349 Jy ! Component: 3200 - total flux cleaned = -0.0020103 Jy ! Component: 3250 - total flux cleaned = -0.00202245 Jy ! Component: 3300 - total flux cleaned = -0.0020832 Jy ! Component: 3350 - total flux cleaned = -0.00211938 Jy ! Component: 3400 - total flux cleaned = -0.00209543 Jy ! Component: 3450 - total flux cleaned = -0.00211932 Jy ! Component: 3500 - total flux cleaned = -0.00215511 Jy ! Component: 3550 - total flux cleaned = -0.00222598 Jy ! Component: 3600 - total flux cleaned = -0.00223761 Jy ! Component: 3650 - total flux cleaned = -0.00228442 Jy ! Component: 3700 - total flux cleaned = -0.00227275 Jy ! Component: 3750 - total flux cleaned = -0.00230753 Jy ! Component: 3800 - total flux cleaned = -0.00234216 Jy ! Component: 3850 - total flux cleaned = -0.00236514 Jy ! Component: 3900 - total flux cleaned = -0.00242224 Jy ! Component: 3950 - total flux cleaned = -0.00241095 Jy ! Component: 4000 - total flux cleaned = -0.00246753 Jy ! Component: 4050 - total flux cleaned = -0.00245623 Jy ! Total flux subtracted in 4096 components = -0.00250113 Jy ! Clean residual min=-0.000593 max=0.000623 Jy/beam ! Clean residual mean=0.000002 rms=0.000207 Jy/beam ! Combined flux in latest and established models = 0.0506735 Jy keep ! Adding 271 model components to the UV plane model. ! The established model now contains 335 components and 0.0506735 Jy ![Exited script file: muppet] wmap "J1258+0038_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.281 x 8.297 at -5.225 degrees (North through East) ! Clean map min=-0.003986 max=0.057512 Jy/beam ! Writing clean map to FITS file: J1258+0038_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.057512 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000207122 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.08041 1.08041 2.16082 4.32165 8.6433 17.2866 34.5732 69.1464 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.057 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.281 x 8.297 at -5.225 degrees (North through East) ! Clean map min=-0.003986 max=0.057512 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1258+0038_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:06:57 2019