! Started logfile: J1257+8342_S_2017_10_09_pus_uvs.log on Sun May 12 13:13:18 2019 obs J1257+8342_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1257+8342_S_2017_10_09_pus_uva.fits ! AN table 1: 219 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.64967 visibilities/baseline/integration-bin. ! Found source: J1257+8342 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 20488 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1257+8342_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 397 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 600 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 383 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1144 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.960811Jy sigma=0.008100 ! Fit after self-cal, rms=0.937852Jy sigma=0.007905 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.477 mas, bmaj=6.304 mas, bpa=32.12 degrees ! Estimated noise=1371.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0501533 Jy ! Component: 100 - total flux cleaned = 0.0618238 Jy ! Total flux subtracted in 100 components = 0.0618238 Jy ! Clean residual min=-0.004260 max=0.004724 Jy/beam ! Clean residual mean=-0.000008 rms=0.001175 Jy/beam ! Combined flux in latest and established models = 0.0618238 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0618238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085482Jy sigma=0.000663 ! Fit after self-cal, rms=0.085222Jy sigma=0.000660 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.276 mas, bmaj=7.517 mas, bpa=33.03 degrees ! Estimated noise=693.538 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00455583 Jy ! Component: 100 - total flux cleaned = 0.00665684 Jy ! Component: 150 - total flux cleaned = 0.00794257 Jy ! Component: 200 - total flux cleaned = 0.0086507 Jy ! Total flux subtracted in 200 components = 0.0086507 Jy ! Clean residual min=-0.002611 max=0.002682 Jy/beam ! Clean residual mean=-0.000020 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.0704745 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 24 components and 0.0704745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084935Jy sigma=0.000659 ! Fit after self-cal, rms=0.084903Jy sigma=0.000659 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.05 HN 1.01 KP 1.01 ! LA 0.99 MK 1.05 NL 0.97 OV 1.00* ! PT 1.02 ! ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.08 HN 1.01 KP 0.97 ! LA 0.97 MK 1.10 NL 1.00* OV 1.00* ! PT 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.07 HN 1.01 KP 0.89 ! LA 0.85 MK 0.92 NL 1.02 OV 1.00* ! PT 1.03 ! ! ! Correcting IF 4. ! A total of 216 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.01 KP 1.00* ! LA 0.76 MK 0.90 NL 1.00* OV 1.00* ! PT 1.07 ! ! ! Fit before self-cal, rms=0.084903Jy sigma=0.000659 ! Fit after self-cal, rms=0.082295Jy sigma=0.000658 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.254 mas, bmaj=7.577 mas, bpa=33.17 degrees ! Estimated noise=696.011 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000285659 Jy ! Component: 100 - total flux cleaned = 0.000285443 Jy ! Component: 150 - total flux cleaned = 0.000284859 Jy ! Component: 200 - total flux cleaned = 0.000316475 Jy ! Total flux subtracted in 200 components = 0.000316475 Jy ! Clean residual min=-0.002012 max=0.002518 Jy/beam ! Clean residual mean=-0.000015 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.070791 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 34 components and 0.070791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082286Jy sigma=0.000658 ! Fit after self-cal, rms=0.082216Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082216Jy sigma=0.000657 ! Fit after self-cal, rms=0.082473Jy sigma=0.000655 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.255 mas, bmaj=7.591 mas, bpa=32.96 degrees ! Estimated noise=696.161 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.10973e-06 Jy ! Component: 100 - total flux cleaned = 3.08678e-05 Jy ! Component: 150 - total flux cleaned = 5.97127e-05 Jy ! Component: 200 - total flux cleaned = 7.16903e-05 Jy ! Total flux subtracted in 200 components = 7.16903e-05 Jy ! Clean residual min=-0.001870 max=0.001966 Jy/beam ! Clean residual mean=-0.000016 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.0708627 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 40 components and 0.0708627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082467Jy sigma=0.000655 ! Fit after self-cal, rms=0.082648Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000149881 Jy ! Component: 100 - total flux cleaned = -0.000150677 Jy ! Component: 150 - total flux cleaned = -0.000138443 Jy ! Component: 200 - total flux cleaned = -0.000138471 Jy ! Total flux subtracted in 200 components = -0.000138471 Jy ! Clean residual min=-0.001897 max=0.002074 Jy/beam ! Clean residual mean=-0.000017 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.0707242 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 44 components and 0.0707242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082642Jy sigma=0.000654 ! Fit after self-cal, rms=0.082644Jy sigma=0.000654 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082644Jy sigma=0.000654 ! Fit after self-cal, rms=0.083448Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.252 mas, bmaj=7.61 mas, bpa=32.94 degrees ! Estimated noise=696.755 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000176102 Jy ! Component: 100 - total flux cleaned = 0.000189167 Jy ! Component: 150 - total flux cleaned = 0.000199311 Jy ! Component: 200 - total flux cleaned = 0.000199008 Jy ! Total flux subtracted in 200 components = 0.000199008 Jy ! Clean residual min=-0.001943 max=0.001989 Jy/beam ! Clean residual mean=-0.000016 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.0709232 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 44 components and 0.0709232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083443Jy sigma=0.000654 ! Fit after self-cal, rms=0.083509Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.19742e-05 Jy ! Component: 100 - total flux cleaned = -8.43998e-05 Jy ! Component: 150 - total flux cleaned = -8.38079e-05 Jy ! Component: 200 - total flux cleaned = -8.34522e-05 Jy ! Total flux subtracted in 200 components = -8.34522e-05 Jy ! Clean residual min=-0.001952 max=0.002002 Jy/beam ! Clean residual mean=-0.000017 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.0708397 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 48 components and 0.0708397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083506Jy sigma=0.000654 ! Fit after self-cal, rms=0.083503Jy sigma=0.000654 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083503Jy sigma=0.000654 ! Fit after self-cal, rms=0.083766Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.617 mas, bmaj=11.74 mas, bpa=19.17 degrees ! Estimated noise=912.444 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000326394 Jy ! Component: 100 - total flux cleaned = 0.000315116 Jy ! Component: 150 - total flux cleaned = 0.000313973 Jy ! Component: 200 - total flux cleaned = 0.000313552 Jy ! Total flux subtracted in 200 components = 0.000313552 Jy ! Clean residual min=-0.001931 max=0.002310 Jy/beam ! Clean residual mean=-0.000035 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 0.0711533 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 52 components and 0.0711533 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083766Jy sigma=0.000654 ! Fit after self-cal, rms=0.083782Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.20188e-05 Jy ! Component: 100 - total flux cleaned = -3.07042e-05 Jy ! Component: 150 - total flux cleaned = -2.54525e-05 Jy ! Component: 200 - total flux cleaned = -2.07314e-05 Jy ! Total flux subtracted in 200 components = -2.07314e-05 Jy ! Clean residual min=-0.001921 max=0.002326 Jy/beam ! Clean residual mean=-0.000035 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 0.0711326 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 52 components and 0.0711326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083783Jy sigma=0.000654 ! Fit after self-cal, rms=0.083783Jy sigma=0.000654 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.25 mas, bmaj=7.627 mas, bpa=32.95 degrees ! Estimated noise=697.017 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.25 x 7.627 at 32.95 degrees (North through East) ! Clean map min=-0.0019043 max=0.062891 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.458 mas, bmaj=6.388 mas, bpa=31.85 degrees ! Estimated noise=1353.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0489783 Jy ! Component: 100 - total flux cleaned = 0.0606614 Jy ! Component: 150 - total flux cleaned = 0.0651457 Jy ! Component: 200 - total flux cleaned = 0.0673001 Jy ! Total flux subtracted in 200 components = 0.0673001 Jy ! Clean residual min=-0.003993 max=0.003806 Jy/beam ! Clean residual mean=-0.000004 rms=0.000993 Jy/beam ! Combined flux in latest and established models = 0.0673001 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0673001 Jy ! Inverting map and beam ! Estimated beam: bmin=3.25 mas, bmaj=7.627 mas, bpa=32.95 degrees ! Estimated noise=697.017 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00201564 Jy ! Component: 100 - total flux cleaned = 0.00301981 Jy ! Component: 150 - total flux cleaned = 0.00320114 Jy ! Component: 200 - total flux cleaned = 0.00325195 Jy ! Total flux subtracted in 200 components = 0.00325195 Jy ! Clean residual min=-0.001959 max=0.001956 Jy/beam ! Clean residual mean=-0.000018 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.070552 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 31 components and 0.0705521 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.617 mas, bmaj=11.74 mas, bpa=19.17 degrees ! Estimated noise=912.444 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000449391 Jy ! Component: 100 - total flux cleaned = 0.000475492 Jy ! Component: 150 - total flux cleaned = 0.000485468 Jy ! Component: 200 - total flux cleaned = 0.000501732 Jy ! Total flux subtracted in 200 components = 0.000501732 Jy ! Clean residual min=-0.001936 max=0.002328 Jy/beam ! Clean residual mean=-0.000036 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 0.0710538 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.98605e-06 Jy ! Component: 100 - total flux cleaned = 1.307e-05 Jy ! Component: 150 - total flux cleaned = 2.37845e-05 Jy ! Component: 200 - total flux cleaned = 2.90499e-05 Jy ! Total flux subtracted in 200 components = 2.90499e-05 Jy ! Clean residual min=-0.001925 max=0.002310 Jy/beam ! Clean residual mean=-0.000036 rms=0.000657 Jy/beam ! Combined flux in latest and established models = 0.0710828 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 47 components and 0.0710828 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.25 mas, bmaj=7.627 mas, bpa=32.95 degrees ! Estimated noise=697.017 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000103281 Jy ! Component: 100 - total flux cleaned = -0.000121753 Jy ! Component: 150 - total flux cleaned = -0.000121521 Jy ! Component: 200 - total flux cleaned = -0.000134566 Jy ! Total flux subtracted in 200 components = -0.000134566 Jy ! Clean residual min=-0.001933 max=0.001898 Jy/beam ! Clean residual mean=-0.000017 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.0709483 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 55 components and 0.0709483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083791Jy sigma=0.000654 ! Fit after self-cal, rms=0.083779Jy sigma=0.000654 wmodel J1257+8342_S_2017_10_09_pus_map.mod ! Writing 55 model components to file: J1257+8342_S_2017_10_09_pus_map.mod wobs J1257+8342_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1257+8342_S_2017_10_09_pus_uvs.fits wwins J1257+8342_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J1257+8342_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000411891 Jy ! Component: 100 - total flux cleaned = 0.000989858 Jy ! Component: 150 - total flux cleaned = 0.00140924 Jy ! Component: 200 - total flux cleaned = 0.00177782 Jy ! Component: 250 - total flux cleaned = 0.00199586 Jy ! Component: 300 - total flux cleaned = 0.00212757 Jy ! Component: 350 - total flux cleaned = 0.00215317 Jy ! Component: 400 - total flux cleaned = 0.00222736 Jy ! Component: 450 - total flux cleaned = 0.00225145 Jy ! Component: 500 - total flux cleaned = 0.00225048 Jy ! Component: 550 - total flux cleaned = 0.00218056 Jy ! Component: 600 - total flux cleaned = 0.00213514 Jy ! Component: 650 - total flux cleaned = 0.00206853 Jy ! Component: 700 - total flux cleaned = 0.00204681 Jy ! Component: 750 - total flux cleaned = 0.00200431 Jy ! Component: 800 - total flux cleaned = 0.00198389 Jy ! Component: 850 - total flux cleaned = 0.0019222 Jy ! Component: 900 - total flux cleaned = 0.00192249 Jy ! Component: 950 - total flux cleaned = 0.00190231 Jy ! Component: 1000 - total flux cleaned = 0.00186269 Jy ! Component: 1050 - total flux cleaned = 0.00182365 Jy ! Component: 1100 - total flux cleaned = 0.00176635 Jy ! Component: 1150 - total flux cleaned = 0.00176615 Jy ! Component: 1200 - total flux cleaned = 0.001692 Jy ! Component: 1250 - total flux cleaned = 0.00171036 Jy ! Component: 1300 - total flux cleaned = 0.00169216 Jy ! Component: 1350 - total flux cleaned = 0.00163831 Jy ! Component: 1400 - total flux cleaned = 0.00169139 Jy ! Component: 1450 - total flux cleaned = 0.00165611 Jy ! Component: 1500 - total flux cleaned = 0.00160436 Jy ! Component: 1550 - total flux cleaned = 0.00162128 Jy ! Component: 1600 - total flux cleaned = 0.00153748 Jy ! Component: 1650 - total flux cleaned = 0.00157065 Jy ! Component: 1700 - total flux cleaned = 0.00155387 Jy ! Component: 1750 - total flux cleaned = 0.00150493 Jy ! Component: 1800 - total flux cleaned = 0.00147292 Jy ! Component: 1850 - total flux cleaned = 0.00145693 Jy ! Component: 1900 - total flux cleaned = 0.00137866 Jy ! Component: 1950 - total flux cleaned = 0.00136342 Jy ! Component: 2000 - total flux cleaned = 0.00133282 Jy ! Component: 2050 - total flux cleaned = 0.00133289 Jy ! Component: 2100 - total flux cleaned = 0.00127289 Jy ! Component: 2150 - total flux cleaned = 0.00131762 Jy ! Component: 2200 - total flux cleaned = 0.00124417 Jy ! Component: 2250 - total flux cleaned = 0.00125895 Jy ! Component: 2300 - total flux cleaned = 0.00127321 Jy ! Component: 2350 - total flux cleaned = 0.00118778 Jy ! Component: 2400 - total flux cleaned = 0.00118791 Jy ! Component: 2450 - total flux cleaned = 0.00127168 Jy ! Component: 2500 - total flux cleaned = 0.00118886 Jy ! Component: 2550 - total flux cleaned = 0.00121641 Jy ! Component: 2600 - total flux cleaned = 0.00121644 Jy ! Component: 2650 - total flux cleaned = 0.00122993 Jy ! Component: 2700 - total flux cleaned = 0.0012034 Jy ! Component: 2750 - total flux cleaned = 0.00121655 Jy ! Component: 2800 - total flux cleaned = 0.00119021 Jy ! Component: 2850 - total flux cleaned = 0.00113832 Jy ! Component: 2900 - total flux cleaned = 0.00115113 Jy ! Component: 2950 - total flux cleaned = 0.0011638 Jy ! Component: 3000 - total flux cleaned = 0.00112584 Jy ! Component: 3050 - total flux cleaned = 0.00117592 Jy ! Component: 3100 - total flux cleaned = 0.00117596 Jy ! Component: 3150 - total flux cleaned = 0.00117605 Jy ! Component: 3200 - total flux cleaned = 0.00121289 Jy ! Component: 3250 - total flux cleaned = 0.00117647 Jy ! Component: 3300 - total flux cleaned = 0.0012609 Jy ! Component: 3350 - total flux cleaned = 0.00123686 Jy ! Component: 3400 - total flux cleaned = 0.00123685 Jy ! Component: 3450 - total flux cleaned = 0.0012605 Jy ! Component: 3500 - total flux cleaned = 0.001284 Jy ! Component: 3550 - total flux cleaned = 0.00130726 Jy ! Component: 3600 - total flux cleaned = 0.00135343 Jy ! Component: 3650 - total flux cleaned = 0.00134184 Jy ! Component: 3700 - total flux cleaned = 0.00133056 Jy ! Component: 3750 - total flux cleaned = 0.00138728 Jy ! Component: 3800 - total flux cleaned = 0.00139853 Jy ! Component: 3850 - total flux cleaned = 0.00142089 Jy ! Component: 3900 - total flux cleaned = 0.00146542 Jy ! Component: 3950 - total flux cleaned = 0.00153171 Jy ! Component: 4000 - total flux cleaned = 0.00152076 Jy ! Component: 4050 - total flux cleaned = 0.00155351 Jy ! Total flux subtracted in 4096 components = 0.00157518 Jy ! Clean residual min=-0.000699 max=0.000713 Jy/beam ! Clean residual mean=-0.000004 rms=0.000200 Jy/beam ! Combined flux in latest and established models = 0.0725235 Jy keep ! Adding 303 model components to the UV plane model. ! The established model now contains 358 components and 0.0725234 Jy ![Exited script file: muppet] wmap "J1257+8342_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.25 x 7.627 at 32.95 degrees (North through East) ! Clean map min=-0.0011481 max=0.062839 Jy/beam ! Writing clean map to FITS file: J1257+8342_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0628391 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000203012 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.9692 0.9692 1.9384 3.8768 7.7536 15.5072 31.0144 62.0288 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.062 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.25 x 7.627 at 32.95 degrees (North through East) ! Clean map min=-0.0011481 max=0.062839 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1257+8342_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:13:24 2019