! Started logfile: J1254+1141_S_2017_10_21_pus_uvs.log on Sat May 11 20:58:20 2019 obs J1254+1141_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1254+1141_S_2017_10_21_pus_uva.fits ! AN table 1: 20 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.669444 visibilities/baseline/integration-bin. ! Found source: J1254+1141 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 1928 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1254+1141_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.575128Jy sigma=0.005903 ! Fit after self-cal, rms=0.564651Jy sigma=0.005813 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.987 mas, bmaj=13.4 mas, bpa=-20.92 degrees ! Estimated noise=2168.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.321165 Jy ! Component: 100 - total flux cleaned = 0.425397 Jy ! Total flux subtracted in 100 components = 0.425397 Jy ! Clean residual min=-0.031891 max=0.047299 Jy/beam ! Clean residual mean=-0.000307 rms=0.009156 Jy/beam ! Combined flux in latest and established models = 0.425397 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.425397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171445Jy sigma=0.001547 ! Fit after self-cal, rms=0.171412Jy sigma=0.001546 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.696 mas, bmaj=14.6 mas, bpa=-21.14 degrees ! Estimated noise=1813.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0739949 Jy ! Component: 100 - total flux cleaned = 0.115174 Jy ! Component: 150 - total flux cleaned = 0.140949 Jy ! Component: 200 - total flux cleaned = 0.158549 Jy ! Total flux subtracted in 200 components = 0.158549 Jy ! Clean residual min=-0.024479 max=0.026014 Jy/beam ! Clean residual mean=-0.000474 rms=0.006886 Jy/beam ! Combined flux in latest and established models = 0.583946 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 66 components and 0.583946 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132722Jy sigma=0.001172 ! Fit after self-cal, rms=0.132653Jy sigma=0.001172 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.88 HN 0.95 KP 1.05 ! LA 0.97 MK 1.00 NL 0.88 OV 0.95 ! PT 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.90 HN 0.98 KP 1.02 ! LA 0.93 MK 1.04 NL 1.22 OV 1.15 ! PT 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 0.97 KP 1.01 ! LA 0.74 MK 1.04 NL 1.39 OV 1.06 ! PT 0.96 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 0.97 KP 1.00* ! LA 0.78 MK 1.23 NL 1.00* OV 1.00* ! PT 1.01 ! ! ! Fit before self-cal, rms=0.132653Jy sigma=0.001172 ! Fit after self-cal, rms=0.108467Jy sigma=0.000958 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.765 mas, bmaj=14.79 mas, bpa=-20.92 degrees ! Estimated noise=1807.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00990499 Jy ! Component: 100 - total flux cleaned = -0.0110089 Jy ! Component: 150 - total flux cleaned = -0.0116887 Jy ! Component: 200 - total flux cleaned = -0.0118758 Jy ! Total flux subtracted in 200 components = -0.0118758 Jy ! Clean residual min=-0.015937 max=0.018629 Jy/beam ! Clean residual mean=-0.000171 rms=0.004813 Jy/beam ! Combined flux in latest and established models = 0.57207 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 83 components and 0.57207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106855Jy sigma=0.000945 ! Fit after self-cal, rms=0.106681Jy sigma=0.000944 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106681Jy sigma=0.000944 ! Fit after self-cal, rms=0.091255Jy sigma=0.000792 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.795 mas, bmaj=15 mas, bpa=-20.87 degrees ! Estimated noise=1808.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00489568 Jy ! Component: 100 - total flux cleaned = -0.00632712 Jy ! Component: 150 - total flux cleaned = -0.00733592 Jy ! Component: 200 - total flux cleaned = -0.00782786 Jy ! Total flux subtracted in 200 components = -0.00782786 Jy ! Clean residual min=-0.009929 max=0.017663 Jy/beam ! Clean residual mean=-0.000076 rms=0.003067 Jy/beam ! Combined flux in latest and established models = 0.564242 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 108 components and 0.564242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090571Jy sigma=0.000786 ! Fit after self-cal, rms=0.090625Jy sigma=0.000785 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-24, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0150826 Jy ! Component: 100 - total flux cleaned = 0.0200958 Jy ! Component: 150 - total flux cleaned = 0.0228782 Jy ! Component: 200 - total flux cleaned = 0.0234002 Jy ! Total flux subtracted in 200 components = 0.0234002 Jy ! Clean residual min=-0.008707 max=0.008915 Jy/beam ! Clean residual mean=0.000019 rms=0.002262 Jy/beam ! Combined flux in latest and established models = 0.587643 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 161 components and 0.587643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088231Jy sigma=0.000753 ! Fit after self-cal, rms=0.088062Jy sigma=0.000752 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088062Jy sigma=0.000752 ! Fit after self-cal, rms=0.087977Jy sigma=0.000748 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.798 mas, bmaj=15.04 mas, bpa=-20.89 degrees ! Estimated noise=1800.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126245 Jy ! Component: 100 - total flux cleaned = 0.00126488 Jy ! Component: 150 - total flux cleaned = 0.0014227 Jy ! Component: 200 - total flux cleaned = 0.00155678 Jy ! Total flux subtracted in 200 components = 0.00155678 Jy ! Clean residual min=-0.007860 max=0.007781 Jy/beam ! Clean residual mean=0.000007 rms=0.002001 Jy/beam ! Combined flux in latest and established models = 0.589199 Jy selfcal ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 202 components and 0.589199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087261Jy sigma=0.000741 ! Fit after self-cal, rms=0.087244Jy sigma=0.000741 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102943 Jy ! Component: 100 - total flux cleaned = 0.000799217 Jy ! Component: 150 - total flux cleaned = 0.000692113 Jy ! Component: 200 - total flux cleaned = 0.000590082 Jy ! Total flux subtracted in 200 components = 0.000590082 Jy ! Clean residual min=-0.007754 max=0.007284 Jy/beam ! Clean residual mean=0.000015 rms=0.001922 Jy/beam ! Combined flux in latest and established models = 0.58979 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 225 components and 0.58979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086947Jy sigma=0.000738 ! Fit after self-cal, rms=0.086933Jy sigma=0.000738 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086933Jy sigma=0.000738 ! Fit after self-cal, rms=0.087052Jy sigma=0.000737 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.55 mas, bmaj=16.8 mas, bpa=-20.74 degrees ! Estimated noise=2138.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000398155 Jy ! Component: 100 - total flux cleaned = -0.000399363 Jy ! Component: 150 - total flux cleaned = -0.000400226 Jy ! Component: 200 - total flux cleaned = -0.000834326 Jy ! Total flux subtracted in 200 components = -0.000834326 Jy ! Clean residual min=-0.008321 max=0.008171 Jy/beam ! Clean residual mean=0.000017 rms=0.002394 Jy/beam ! Combined flux in latest and established models = 0.588955 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 244 components and 0.588955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086735Jy sigma=0.000735 ! Fit after self-cal, rms=0.086711Jy sigma=0.000734 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103822 Jy ! Component: 100 - total flux cleaned = 0.000645545 Jy ! Component: 150 - total flux cleaned = 0.000371918 Jy ! Component: 200 - total flux cleaned = 0.0001996 Jy ! Total flux subtracted in 200 components = 0.0001996 Jy ! Clean residual min=-0.008187 max=0.007975 Jy/beam ! Clean residual mean=0.000023 rms=0.002328 Jy/beam ! Combined flux in latest and established models = 0.589155 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 259 components and 0.589155 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086592Jy sigma=0.000734 ! Fit after self-cal, rms=0.086567Jy sigma=0.000734 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.802 mas, bmaj=15.08 mas, bpa=-20.88 degrees ! Estimated noise=1796.85 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.802 x 15.08 at -20.88 degrees (North through East) ! Clean map min=-0.0070351 max=0.4315 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.068 mas, bmaj=13.81 mas, bpa=-20.76 degrees ! Estimated noise=2202.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.324734 Jy ! Component: 100 - total flux cleaned = 0.422569 Jy ! Component: 150 - total flux cleaned = 0.471095 Jy ! Component: 200 - total flux cleaned = 0.499411 Jy ! Total flux subtracted in 200 components = 0.499411 Jy ! Clean residual min=-0.014376 max=0.020427 Jy/beam ! Clean residual mean=-0.000116 rms=0.003669 Jy/beam ! Combined flux in latest and established models = 0.499411 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.499411 Jy ! Inverting map and beam ! Estimated beam: bmin=3.802 mas, bmaj=15.08 mas, bpa=-20.88 degrees ! Estimated noise=1796.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8.5, -3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0256151 Jy ! Component: 100 - total flux cleaned = 0.0423938 Jy ! Component: 150 - total flux cleaned = 0.0548862 Jy ! Component: 200 - total flux cleaned = 0.0644877 Jy ! Total flux subtracted in 200 components = 0.0644877 Jy ! Clean residual min=-0.008310 max=0.008076 Jy/beam ! Clean residual mean=-0.000072 rms=0.002245 Jy/beam ! Combined flux in latest and established models = 0.563898 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 60 components and 0.563898 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.55 mas, bmaj=16.8 mas, bpa=-20.74 degrees ! Estimated noise=2138.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101715 Jy ! Component: 100 - total flux cleaned = 0.0172508 Jy ! Component: 150 - total flux cleaned = 0.0198287 Jy ! Component: 200 - total flux cleaned = 0.0217519 Jy ! Total flux subtracted in 200 components = 0.0217519 Jy ! Clean residual min=-0.008156 max=0.008319 Jy/beam ! Clean residual mean=0.000005 rms=0.002329 Jy/beam ! Combined flux in latest and established models = 0.58565 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000740629 Jy ! Component: 100 - total flux cleaned = 0.00112501 Jy ! Component: 150 - total flux cleaned = 0.00147501 Jy ! Component: 200 - total flux cleaned = 0.00189612 Jy ! Total flux subtracted in 200 components = 0.00189612 Jy ! Clean residual min=-0.007804 max=0.008102 Jy/beam ! Clean residual mean=0.000017 rms=0.002218 Jy/beam ! Combined flux in latest and established models = 0.587546 Jy ! Adding 95 model components to the UV plane model. ! The established model now contains 150 components and 0.587547 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.802 mas, bmaj=15.08 mas, bpa=-20.88 degrees ! Estimated noise=1796.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000210846 Jy ! Component: 100 - total flux cleaned = -4.0281e-05 Jy ! Component: 150 - total flux cleaned = 0.00023852 Jy ! Component: 200 - total flux cleaned = 0.000733674 Jy ! Total flux subtracted in 200 components = 0.000733674 Jy ! Clean residual min=-0.006780 max=0.006066 Jy/beam ! Clean residual mean=0.000009 rms=0.001624 Jy/beam ! Combined flux in latest and established models = 0.58828 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 171 components and 0.58828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086353Jy sigma=0.000731 ! Fit after self-cal, rms=0.086165Jy sigma=0.000729 wmodel J1254+1141_S_2017_10_21_pus_map.mod ! Writing 171 model components to file: J1254+1141_S_2017_10_21_pus_map.mod wobs J1254+1141_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1254+1141_S_2017_10_21_pus_uvs.fits wwins J1254+1141_S_2017_10_21_pus_map.win ! wwins: Wrote 3 windows to J1254+1141_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00185548 Jy ! Component: 100 - total flux cleaned = -0.00146803 Jy ! Component: 150 - total flux cleaned = -0.000829961 Jy ! Component: 200 - total flux cleaned = -0.000318794 Jy ! Component: 250 - total flux cleaned = -0.000155148 Jy ! Component: 300 - total flux cleaned = -2.45124e-06 Jy ! Component: 350 - total flux cleaned = 0.000220254 Jy ! Component: 400 - total flux cleaned = 0.000148457 Jy ! Component: 450 - total flux cleaned = 0.000146995 Jy ! Component: 500 - total flux cleaned = 0.000282956 Jy ! Component: 550 - total flux cleaned = 0.000349279 Jy ! Component: 600 - total flux cleaned = 0.000413511 Jy ! Component: 650 - total flux cleaned = 0.000353789 Jy ! Component: 700 - total flux cleaned = 0.00053569 Jy ! Component: 750 - total flux cleaned = 0.000475253 Jy ! Component: 800 - total flux cleaned = 0.000591678 Jy ! Component: 850 - total flux cleaned = 0.000591994 Jy ! Component: 900 - total flux cleaned = 0.000647147 Jy ! Component: 950 - total flux cleaned = 0.000918259 Jy ! Component: 1000 - total flux cleaned = 0.000971543 Jy ! Component: 1050 - total flux cleaned = 0.00112796 Jy ! Component: 1100 - total flux cleaned = 0.00133129 Jy ! Component: 1150 - total flux cleaned = 0.00138126 Jy ! Component: 1200 - total flux cleaned = 0.00143024 Jy ! Component: 1250 - total flux cleaned = 0.00162169 Jy ! Component: 1300 - total flux cleaned = 0.00162085 Jy ! Component: 1350 - total flux cleaned = 0.00171385 Jy ! Component: 1400 - total flux cleaned = 0.00185009 Jy ! Component: 1450 - total flux cleaned = 0.00202881 Jy ! Component: 1500 - total flux cleaned = 0.00211679 Jy ! Component: 1550 - total flux cleaned = 0.0022477 Jy ! Component: 1600 - total flux cleaned = 0.00246275 Jy ! Component: 1650 - total flux cleaned = 0.0026746 Jy ! Component: 1700 - total flux cleaned = 0.00275821 Jy ! Component: 1750 - total flux cleaned = 0.0029652 Jy ! Component: 1800 - total flux cleaned = 0.00325096 Jy ! Component: 1850 - total flux cleaned = 0.00321015 Jy ! Component: 1900 - total flux cleaned = 0.00321042 Jy ! Component: 1950 - total flux cleaned = 0.00317166 Jy ! Component: 2000 - total flux cleaned = 0.00344539 Jy ! Component: 2050 - total flux cleaned = 0.00348391 Jy ! Component: 2100 - total flux cleaned = 0.00352202 Jy ! Component: 2150 - total flux cleaned = 0.00356016 Jy ! Component: 2200 - total flux cleaned = 0.00374752 Jy ! Component: 2250 - total flux cleaned = 0.00374651 Jy ! Component: 2300 - total flux cleaned = 0.00370947 Jy ! Component: 2350 - total flux cleaned = 0.00385561 Jy ! Component: 2400 - total flux cleaned = 0.00385578 Jy ! Component: 2450 - total flux cleaned = 0.00385573 Jy ! Component: 2500 - total flux cleaned = 0.00389156 Jy ! Component: 2550 - total flux cleaned = 0.00406684 Jy ! Component: 2600 - total flux cleaned = 0.00392729 Jy ! Component: 2650 - total flux cleaned = 0.00392742 Jy ! Component: 2700 - total flux cleaned = 0.00403026 Jy ! Component: 2750 - total flux cleaned = 0.00409804 Jy ! Component: 2800 - total flux cleaned = 0.00413208 Jy ! Component: 2850 - total flux cleaned = 0.00416546 Jy ! Component: 2900 - total flux cleaned = 0.00426473 Jy ! Component: 2950 - total flux cleaned = 0.00439557 Jy ! Component: 3000 - total flux cleaned = 0.00439514 Jy ! Component: 3050 - total flux cleaned = 0.00439522 Jy ! Component: 3100 - total flux cleaned = 0.00452339 Jy ! Component: 3150 - total flux cleaned = 0.00458742 Jy ! Component: 3200 - total flux cleaned = 0.00449223 Jy ! Component: 3250 - total flux cleaned = 0.00446059 Jy ! Component: 3300 - total flux cleaned = 0.00446089 Jy ! Component: 3350 - total flux cleaned = 0.00449188 Jy ! Component: 3400 - total flux cleaned = 0.00433727 Jy ! Component: 3450 - total flux cleaned = 0.00433722 Jy ! Component: 3500 - total flux cleaned = 0.00427598 Jy ! Component: 3550 - total flux cleaned = 0.00418513 Jy ! Component: 3600 - total flux cleaned = 0.00418514 Jy ! Component: 3650 - total flux cleaned = 0.00412504 Jy ! Component: 3700 - total flux cleaned = 0.00403557 Jy ! Component: 3750 - total flux cleaned = 0.00409545 Jy ! Component: 3800 - total flux cleaned = 0.00403617 Jy ! Component: 3850 - total flux cleaned = 0.00403603 Jy ! Component: 3900 - total flux cleaned = 0.00391832 Jy ! Component: 3950 - total flux cleaned = 0.00391836 Jy ! Component: 4000 - total flux cleaned = 0.00383061 Jy ! Component: 4050 - total flux cleaned = 0.00371399 Jy ! Total flux subtracted in 4096 components = 0.00371409 Jy ! Clean residual min=-0.001792 max=0.001779 Jy/beam ! Clean residual mean=-0.000006 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.591994 Jy keep ! Adding 289 model components to the UV plane model. ! The established model now contains 460 components and 0.591994 Jy ![Exited script file: muppet] wmap "J1254+1141_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.802 x 15.08 at -20.88 degrees (North through East) ! Clean map min=-0.0073456 max=0.42983 Jy/beam ! Writing clean map to FITS file: J1254+1141_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.429826 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000562098 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.39232 0.39232 0.784641 1.56928 3.13856 6.27712 12.5542 25.1085 50.217 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.429 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.802 x 15.08 at -20.88 degrees (North through East) ! Clean map min=-0.0073456 max=0.42983 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1254+1141_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:58:24 2019