! Started logfile: J1254+1141_S_2017_07_16_pus_uvs.log on Thu May 9 11:09:07 2019 obs J1254+1141_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J1254+1141_S_2017_07_16_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.566667 visibilities/baseline/integration-bin. ! Found source: J1254+1141 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 1020 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1254+1141_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.561171Jy sigma=0.004925 ! Fit after self-cal, rms=0.552910Jy sigma=0.004843 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.594 mas, bmaj=7.801 mas, bpa=0.3712 degrees ! Estimated noise=3391.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.345406 Jy ! Component: 100 - total flux cleaned = 0.451498 Jy ! Total flux subtracted in 100 components = 0.451498 Jy ! Clean residual min=-0.032046 max=0.052083 Jy/beam ! Clean residual mean=0.000110 rms=0.010309 Jy/beam ! Combined flux in latest and established models = 0.451498 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.451498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124200Jy sigma=0.001075 ! Fit after self-cal, rms=0.124130Jy sigma=0.001074 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.969 mas, bmaj=7.872 mas, bpa=3.172 degrees ! Estimated noise=3014.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0628636 Jy ! Component: 100 - total flux cleaned = 0.0937516 Jy ! Component: 150 - total flux cleaned = 0.109338 Jy ! Component: 200 - total flux cleaned = 0.117624 Jy ! Total flux subtracted in 200 components = 0.117624 Jy ! Clean residual min=-0.018816 max=0.024263 Jy/beam ! Clean residual mean=0.000073 rms=0.006109 Jy/beam ! Combined flux in latest and established models = 0.569122 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 18 components and 0.569122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089462Jy sigma=0.000777 ! Fit after self-cal, rms=0.089364Jy sigma=0.000776 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00 KP 1.00 ! LA 0.98 MK 1.00* NL 1.01 OV 1.00* ! PT 1.02 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.01 KP 0.96 ! LA 0.96 MK 0.93 NL 1.12 OV 0.98 ! PT 1.04 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.99 KP 0.93 ! LA 1.00 MK 1.13 NL 1.08 OV 0.93 ! PT 0.98 SC 0.98 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.07 KP 1.00* ! LA 0.86 MK 1.11 NL 1.00* OV 1.00* ! PT 0.98 SC 1.00* ! ! ! Fit before self-cal, rms=0.089364Jy sigma=0.000776 ! Fit after self-cal, rms=0.083369Jy sigma=0.000719 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.984 mas, bmaj=7.914 mas, bpa=3.653 degrees ! Estimated noise=3014.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00322815 Jy ! Component: 100 - total flux cleaned = -0.00324387 Jy ! Component: 150 - total flux cleaned = -0.00335447 Jy ! Component: 200 - total flux cleaned = -0.00355096 Jy ! Total flux subtracted in 200 components = -0.00355096 Jy ! Clean residual min=-0.016626 max=0.019456 Jy/beam ! Clean residual mean=0.000050 rms=0.004804 Jy/beam ! Combined flux in latest and established models = 0.565571 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 24 components and 0.565571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082887Jy sigma=0.000715 ! Fit after self-cal, rms=0.082899Jy sigma=0.000715 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082899Jy sigma=0.000715 ! Fit after self-cal, rms=0.083099Jy sigma=0.000714 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.987 mas, bmaj=7.921 mas, bpa=3.795 degrees ! Estimated noise=3020.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00177694 Jy ! Component: 100 - total flux cleaned = -0.00211542 Jy ! Component: 150 - total flux cleaned = -0.00218939 Jy ! Component: 200 - total flux cleaned = -0.00225858 Jy ! Total flux subtracted in 200 components = -0.00225858 Jy ! Clean residual min=-0.015908 max=0.019313 Jy/beam ! Clean residual mean=0.000049 rms=0.004750 Jy/beam ! Combined flux in latest and established models = 0.563312 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 28 components and 0.563312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082903Jy sigma=0.000712 ! Fit after self-cal, rms=0.082904Jy sigma=0.000712 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.55978e-05 Jy ! Component: 100 - total flux cleaned = -0.000164671 Jy ! Component: 150 - total flux cleaned = -0.000108377 Jy ! Component: 200 - total flux cleaned = -5.33585e-05 Jy ! Total flux subtracted in 200 components = -5.33585e-05 Jy ! Clean residual min=-0.015677 max=0.019295 Jy/beam ! Clean residual mean=0.000049 rms=0.004735 Jy/beam ! Combined flux in latest and established models = 0.563259 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 36 components and 0.563259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082819Jy sigma=0.000712 ! Fit after self-cal, rms=0.082821Jy sigma=0.000712 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082821Jy sigma=0.000712 ! Fit after self-cal, rms=0.082915Jy sigma=0.000711 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.99 mas, bmaj=7.927 mas, bpa=3.877 degrees ! Estimated noise=3023.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00120716 Jy ! Component: 100 - total flux cleaned = -0.00157159 Jy ! Component: 150 - total flux cleaned = -0.00162588 Jy ! Component: 200 - total flux cleaned = -0.0015728 Jy ! Total flux subtracted in 200 components = -0.0015728 Jy ! Clean residual min=-0.015316 max=0.019103 Jy/beam ! Clean residual mean=0.000048 rms=0.004707 Jy/beam ! Combined flux in latest and established models = 0.561686 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 39 components and 0.561686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082824Jy sigma=0.000711 ! Fit after self-cal, rms=0.082826Jy sigma=0.000711 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000174885 Jy ! Component: 100 - total flux cleaned = 0.000227921 Jy ! Component: 150 - total flux cleaned = 0.000229617 Jy ! Component: 200 - total flux cleaned = 0.000279784 Jy ! Total flux subtracted in 200 components = 0.000279784 Jy ! Clean residual min=-0.015154 max=0.019035 Jy/beam ! Clean residual mean=0.000048 rms=0.004690 Jy/beam ! Combined flux in latest and established models = 0.561966 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 40 components and 0.561966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082769Jy sigma=0.000710 ! Fit after self-cal, rms=0.082771Jy sigma=0.000710 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082771Jy sigma=0.000710 ! Fit after self-cal, rms=0.082816Jy sigma=0.000710 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.368 mas, bmaj=13.98 mas, bpa=-7.843 degrees ! Estimated noise=4062.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00334859 Jy ! Component: 100 - total flux cleaned = 0.00314262 Jy ! Component: 150 - total flux cleaned = 0.0032847 Jy ! Component: 200 - total flux cleaned = 0.00352046 Jy ! Total flux subtracted in 200 components = 0.00352046 Jy ! Clean residual min=-0.019853 max=0.031134 Jy/beam ! Clean residual mean=0.000111 rms=0.008361 Jy/beam ! Combined flux in latest and established models = 0.565487 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 47 components and 0.565486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083390Jy sigma=0.000715 ! Fit after self-cal, rms=0.083268Jy sigma=0.000713 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000226258 Jy ! Component: 100 - total flux cleaned = 3.94882e-05 Jy ! Component: 150 - total flux cleaned = 0.000151201 Jy ! Component: 200 - total flux cleaned = 0.00024783 Jy ! Total flux subtracted in 200 components = 0.00024783 Jy ! Clean residual min=-0.019257 max=0.030463 Jy/beam ! Clean residual mean=0.000110 rms=0.008314 Jy/beam ! Combined flux in latest and established models = 0.565734 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 49 components and 0.565734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083654Jy sigma=0.000717 ! Fit after self-cal, rms=0.083576Jy sigma=0.000716 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.991 mas, bmaj=7.93 mas, bpa=3.936 degrees ! Estimated noise=3023.96 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.991 x 7.93 at 3.936 degrees (North through East) ! Clean map min=-0.016681 max=0.46523 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.621 mas, bmaj=7.821 mas, bpa=1.102 degrees ! Estimated noise=3410.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.346013 Jy ! Component: 100 - total flux cleaned = 0.448548 Jy ! Component: 150 - total flux cleaned = 0.502342 Jy ! Component: 200 - total flux cleaned = 0.533053 Jy ! Total flux subtracted in 200 components = 0.533053 Jy ! Clean residual min=-0.017765 max=0.017668 Jy/beam ! Clean residual mean=0.000040 rms=0.004866 Jy/beam ! Combined flux in latest and established models = 0.533052 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.533052 Jy ! Inverting map and beam ! Estimated beam: bmin=2.991 mas, bmaj=7.93 mas, bpa=3.936 degrees ! Estimated noise=3023.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0199835 Jy ! Component: 100 - total flux cleaned = 0.0243901 Jy ! Component: 150 - total flux cleaned = 0.0261608 Jy ! Component: 200 - total flux cleaned = 0.0265999 Jy ! Total flux subtracted in 200 components = 0.0265999 Jy ! Clean residual min=-0.016688 max=0.019781 Jy/beam ! Clean residual mean=0.000049 rms=0.004856 Jy/beam ! Combined flux in latest and established models = 0.559652 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 19 components and 0.559652 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.368 mas, bmaj=13.98 mas, bpa=-7.843 degrees ! Estimated noise=4062.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00396483 Jy ! Component: 100 - total flux cleaned = 0.00443044 Jy ! Component: 150 - total flux cleaned = 0.0046241 Jy ! Component: 200 - total flux cleaned = 0.00494294 Jy ! Total flux subtracted in 200 components = 0.00494294 Jy ! Clean residual min=-0.019907 max=0.032234 Jy/beam ! Clean residual mean=0.000113 rms=0.008574 Jy/beam ! Combined flux in latest and established models = 0.564595 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000129722 Jy ! Component: 100 - total flux cleaned = 0.000246838 Jy ! Component: 150 - total flux cleaned = 0.000358656 Jy ! Component: 200 - total flux cleaned = 0.000354078 Jy ! Total flux subtracted in 200 components = 0.000354078 Jy ! Clean residual min=-0.019504 max=0.031487 Jy/beam ! Clean residual mean=0.000113 rms=0.008433 Jy/beam ! Combined flux in latest and established models = 0.564949 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 26 components and 0.564949 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.991 mas, bmaj=7.93 mas, bpa=3.936 degrees ! Estimated noise=3023.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00475049 Jy ! Component: 100 - total flux cleaned = -0.003805 Jy ! Component: 150 - total flux cleaned = -0.0034901 Jy ! Component: 200 - total flux cleaned = -0.00323803 Jy ! Total flux subtracted in 200 components = -0.00323803 Jy ! Clean residual min=-0.015809 max=0.019225 Jy/beam ! Clean residual mean=0.000047 rms=0.004685 Jy/beam ! Combined flux in latest and established models = 0.561711 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 32 components and 0.561711 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083189Jy sigma=0.000712 ! Fit after self-cal, rms=0.083112Jy sigma=0.000711 wmodel J1254+1141_S_2017_07_16_pus_map.mod ! Writing 32 model components to file: J1254+1141_S_2017_07_16_pus_map.mod wobs J1254+1141_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J1254+1141_S_2017_07_16_pus_uvs.fits wwins J1254+1141_S_2017_07_16_pus_map.win ! wwins: Wrote 1 windows to J1254+1141_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00825782 Jy ! Component: 100 - total flux cleaned = 0.0125298 Jy ! Component: 150 - total flux cleaned = 0.0143708 Jy ! Component: 200 - total flux cleaned = 0.015388 Jy ! Component: 250 - total flux cleaned = 0.0157484 Jy ! Component: 300 - total flux cleaned = 0.0152369 Jy ! Component: 350 - total flux cleaned = 0.0150785 Jy ! Component: 400 - total flux cleaned = 0.0152224 Jy ! Component: 450 - total flux cleaned = 0.015499 Jy ! Component: 500 - total flux cleaned = 0.0153782 Jy ! Component: 550 - total flux cleaned = 0.0150247 Jy ! Component: 600 - total flux cleaned = 0.0149155 Jy ! Component: 650 - total flux cleaned = 0.0146993 Jy ! Component: 700 - total flux cleaned = 0.0148015 Jy ! Component: 750 - total flux cleaned = 0.0148989 Jy ! Component: 800 - total flux cleaned = 0.0148044 Jy ! Component: 850 - total flux cleaned = 0.0147142 Jy ! Component: 900 - total flux cleaned = 0.014628 Jy ! Component: 950 - total flux cleaned = 0.0145466 Jy ! Component: 1000 - total flux cleaned = 0.0147072 Jy ! Component: 1050 - total flux cleaned = 0.0143948 Jy ! Component: 1100 - total flux cleaned = 0.0141695 Jy ! Component: 1150 - total flux cleaned = 0.0138785 Jy ! Component: 1200 - total flux cleaned = 0.0135245 Jy ! Component: 1250 - total flux cleaned = 0.0131821 Jy ! Component: 1300 - total flux cleaned = 0.0129822 Jy ! Component: 1350 - total flux cleaned = 0.0128533 Jy ! Component: 1400 - total flux cleaned = 0.0129177 Jy ! Component: 1450 - total flux cleaned = 0.0129809 Jy ! Component: 1500 - total flux cleaned = 0.0131641 Jy ! Component: 1550 - total flux cleaned = 0.013403 Jy ! Component: 1600 - total flux cleaned = 0.0134016 Jy ! Component: 1650 - total flux cleaned = 0.013516 Jy ! Component: 1700 - total flux cleaned = 0.0134584 Jy ! Component: 1750 - total flux cleaned = 0.0135707 Jy ! Component: 1800 - total flux cleaned = 0.0135149 Jy ! Component: 1850 - total flux cleaned = 0.0134061 Jy ! Component: 1900 - total flux cleaned = 0.0136226 Jy ! Component: 1950 - total flux cleaned = 0.01373 Jy ! Component: 2000 - total flux cleaned = 0.0139417 Jy ! Component: 2050 - total flux cleaned = 0.0140991 Jy ! Component: 2100 - total flux cleaned = 0.0142031 Jy ! Component: 2150 - total flux cleaned = 0.0144096 Jy ! Component: 2200 - total flux cleaned = 0.0146149 Jy ! Component: 2250 - total flux cleaned = 0.0146153 Jy ! Component: 2300 - total flux cleaned = 0.0146662 Jy ! Component: 2350 - total flux cleaned = 0.0147666 Jy ! Component: 2400 - total flux cleaned = 0.0147667 Jy ! Component: 2450 - total flux cleaned = 0.0148164 Jy ! Component: 2500 - total flux cleaned = 0.0147171 Jy ! Component: 2550 - total flux cleaned = 0.0147177 Jy ! Component: 2600 - total flux cleaned = 0.0147671 Jy ! Component: 2650 - total flux cleaned = 0.0149637 Jy ! Component: 2700 - total flux cleaned = 0.0151597 Jy ! Component: 2750 - total flux cleaned = 0.0153064 Jy ! Component: 2800 - total flux cleaned = 0.0153555 Jy ! Component: 2850 - total flux cleaned = 0.0155507 Jy ! Component: 2900 - total flux cleaned = 0.0156484 Jy ! Component: 2950 - total flux cleaned = 0.0155996 Jy ! Component: 3000 - total flux cleaned = 0.015746 Jy ! Component: 3050 - total flux cleaned = 0.0157461 Jy ! Component: 3100 - total flux cleaned = 0.0158438 Jy ! Component: 3150 - total flux cleaned = 0.0159417 Jy ! Component: 3200 - total flux cleaned = 0.01604 Jy ! Component: 3250 - total flux cleaned = 0.0161383 Jy ! Component: 3300 - total flux cleaned = 0.0162862 Jy ! Component: 3350 - total flux cleaned = 0.0163357 Jy ! Component: 3400 - total flux cleaned = 0.0163851 Jy ! Component: 3450 - total flux cleaned = 0.0164844 Jy ! Component: 3500 - total flux cleaned = 0.0165838 Jy ! Component: 3550 - total flux cleaned = 0.0165833 Jy ! Component: 3600 - total flux cleaned = 0.0166829 Jy ! Component: 3650 - total flux cleaned = 0.016683 Jy ! Component: 3700 - total flux cleaned = 0.016582 Jy ! Component: 3750 - total flux cleaned = 0.0165819 Jy ! Component: 3800 - total flux cleaned = 0.0164276 Jy ! Component: 3850 - total flux cleaned = 0.0164276 Jy ! Component: 3900 - total flux cleaned = 0.0164278 Jy ! Component: 3950 - total flux cleaned = 0.0164807 Jy ! Component: 4000 - total flux cleaned = 0.0163744 Jy ! Component: 4050 - total flux cleaned = 0.0163208 Jy ! Total flux subtracted in 4096 components = 0.0162664 Jy ! Clean residual min=-0.003309 max=0.003165 Jy/beam ! Clean residual mean=0.000015 rms=0.000879 Jy/beam ! Combined flux in latest and established models = 0.577978 Jy keep ! Adding 276 model components to the UV plane model. ! The established model now contains 308 components and 0.577978 Jy ![Exited script file: muppet] wmap "J1254+1141_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.991 x 7.93 at 3.936 degrees (North through East) ! Clean map min=-0.0062492 max=0.4655 Jy/beam ! Writing clean map to FITS file: J1254+1141_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.465496 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000925985 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.596774 0.596774 1.19355 2.38709 4.77419 9.54838 19.0968 38.1935 76.387 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0027 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.465 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.991 x 7.93 at 3.936 degrees (North through East) ! Clean map min=-0.0062492 max=0.4655 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1254+1141_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:09:12 2019