! Started logfile: J1253+4107_S_2017_10_21_pus_uvs.log on Sat May 11 20:58:15 2019 obs J1253+4107_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1253+4107_S_2017_10_21_pus_uva.fits ! AN table 1: 100 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.842778 visibilities/baseline/integration-bin. ! Found source: J1253+4107 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 12136 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1253+4107_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 137 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 180 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 137 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 483 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.999897Jy sigma=0.009816 ! Fit after self-cal, rms=0.961136Jy sigma=0.009458 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.582 mas, bmaj=5.19 mas, bpa=-34.47 degrees ! Estimated noise=1304.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.032733 Jy ! Component: 100 - total flux cleaned = 0.0400917 Jy ! Total flux subtracted in 100 components = 0.0400917 Jy ! Clean residual min=-0.004868 max=0.004500 Jy/beam ! Clean residual mean=0.000001 rms=0.001151 Jy/beam ! Combined flux in latest and established models = 0.0400917 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0400917 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078137Jy sigma=0.000694 ! Fit after self-cal, rms=0.076529Jy sigma=0.000679 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.481 mas, bmaj=6.089 mas, bpa=-29.88 degrees ! Estimated noise=754.634 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00406863 Jy ! Component: 100 - total flux cleaned = 0.00545409 Jy ! Component: 150 - total flux cleaned = 0.00571919 Jy ! Component: 200 - total flux cleaned = 0.00579178 Jy ! Total flux subtracted in 200 components = 0.00579178 Jy ! Clean residual min=-0.003574 max=0.002809 Jy/beam ! Clean residual mean=0.000009 rms=0.000808 Jy/beam ! Combined flux in latest and established models = 0.0458834 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 25 components and 0.0458834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076272Jy sigma=0.000677 ! Fit after self-cal, rms=0.076253Jy sigma=0.000677 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.04 HN 1.01 KP 1.15 ! LA 1.11 MK 0.96 NL 1.12 OV 0.97 ! PT 0.88 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.09 HN 1.08 KP 1.16 ! LA 1.00 MK 0.98 NL 0.99 OV 1.14 ! PT 0.84 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.14 HN 1.02 KP 1.16 ! LA 0.93 MK 1.12 NL 1.19 OV 0.92 ! PT 0.79 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 0.91 KP 1.00* ! LA 0.77 MK 0.97 NL 1.00* OV 1.00* ! PT 0.69 ! ! ! Fit before self-cal, rms=0.076253Jy sigma=0.000677 ! Fit after self-cal, rms=0.074913Jy sigma=0.000672 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.494 mas, bmaj=6.107 mas, bpa=-29.98 degrees ! Estimated noise=752.459 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.36819e-05 Jy ! Component: 100 - total flux cleaned = -3.34902e-07 Jy ! Component: 150 - total flux cleaned = -2.72366e-05 Jy ! Component: 200 - total flux cleaned = -4.81911e-05 Jy ! Total flux subtracted in 200 components = -4.81911e-05 Jy ! Clean residual min=-0.002214 max=0.002270 Jy/beam ! Clean residual mean=-0.000002 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 0.0458352 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 28 components and 0.0458352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074887Jy sigma=0.000672 ! Fit after self-cal, rms=0.075074Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075074Jy sigma=0.000670 ! Fit after self-cal, rms=0.075123Jy sigma=0.000668 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.575 mas, bmaj=6.13 mas, bpa=-30.34 degrees ! Estimated noise=752.939 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000745864 Jy ! Component: 100 - total flux cleaned = -0.000796107 Jy ! Component: 150 - total flux cleaned = -0.000795594 Jy ! Component: 200 - total flux cleaned = -0.000784859 Jy ! Total flux subtracted in 200 components = -0.000784859 Jy ! Clean residual min=-0.002043 max=0.001891 Jy/beam ! Clean residual mean=-0.000003 rms=0.000500 Jy/beam ! Combined flux in latest and established models = 0.0450504 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 34 components and 0.0450504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075110Jy sigma=0.000668 ! Fit after self-cal, rms=0.075394Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.39452e-06 Jy ! Component: 100 - total flux cleaned = 6.84027e-05 Jy ! Component: 150 - total flux cleaned = 8.00762e-05 Jy ! Component: 200 - total flux cleaned = 8.01869e-05 Jy ! Total flux subtracted in 200 components = 8.01869e-05 Jy ! Clean residual min=-0.002106 max=0.002093 Jy/beam ! Clean residual mean=-0.000003 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.0451306 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 38 components and 0.0451306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075387Jy sigma=0.000667 ! Fit after self-cal, rms=0.075397Jy sigma=0.000667 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075397Jy sigma=0.000667 ! Fit after self-cal, rms=0.077065Jy sigma=0.000667 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.618 mas, bmaj=6.172 mas, bpa=-29.89 degrees ! Estimated noise=754.608 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000556575 Jy ! Component: 100 - total flux cleaned = -0.000569904 Jy ! Component: 150 - total flux cleaned = -0.000592997 Jy ! Component: 200 - total flux cleaned = -0.000592959 Jy ! Total flux subtracted in 200 components = -0.000592959 Jy ! Clean residual min=-0.001910 max=0.001929 Jy/beam ! Clean residual mean=-0.000002 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.0445376 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 42 components and 0.0445376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077056Jy sigma=0.000667 ! Fit after self-cal, rms=0.077241Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.23782e-05 Jy ! Component: 100 - total flux cleaned = -3.81303e-05 Jy ! Component: 150 - total flux cleaned = -2.81529e-05 Jy ! Component: 200 - total flux cleaned = -2.83702e-05 Jy ! Total flux subtracted in 200 components = -2.83702e-05 Jy ! Clean residual min=-0.002035 max=0.002039 Jy/beam ! Clean residual mean=-0.000002 rms=0.000493 Jy/beam ! Combined flux in latest and established models = 0.0445092 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 45 components and 0.0445093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077236Jy sigma=0.000667 ! Fit after self-cal, rms=0.077245Jy sigma=0.000667 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077245Jy sigma=0.000667 ! Fit after self-cal, rms=0.078233Jy sigma=0.000667 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.716 mas, bmaj=9.87 mas, bpa=26.44 degrees ! Estimated noise=861.092 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000368602 Jy ! Component: 100 - total flux cleaned = -0.000391858 Jy ! Component: 150 - total flux cleaned = -0.000421739 Jy ! Component: 200 - total flux cleaned = -0.000437698 Jy ! Total flux subtracted in 200 components = -0.000437698 Jy ! Clean residual min=-0.001823 max=0.002031 Jy/beam ! Clean residual mean=-0.000002 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.0440716 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 47 components and 0.0440716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078228Jy sigma=0.000667 ! Fit after self-cal, rms=0.078337Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.34258e-05 Jy ! Component: 100 - total flux cleaned = 1.51303e-05 Jy ! Component: 150 - total flux cleaned = 7.31526e-06 Jy ! Component: 200 - total flux cleaned = -2.76771e-08 Jy ! Total flux subtracted in 200 components = -2.76771e-08 Jy ! Clean residual min=-0.001842 max=0.002098 Jy/beam ! Clean residual mean=-0.000002 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.0440715 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 47 components and 0.0440715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078334Jy sigma=0.000667 ! Fit after self-cal, rms=0.078337Jy sigma=0.000667 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.651 mas, bmaj=6.213 mas, bpa=-29.52 degrees ! Estimated noise=755.209 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.651 x 6.213 at -29.52 degrees (North through East) ! Clean map min=-0.0019205 max=0.042683 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.684 mas, bmaj=5.254 mas, bpa=-33.3 degrees ! Estimated noise=1327.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0339428 Jy ! Component: 100 - total flux cleaned = 0.0426357 Jy ! Component: 150 - total flux cleaned = 0.044005 Jy ! Component: 200 - total flux cleaned = 0.0439084 Jy ! Total flux subtracted in 200 components = 0.0439084 Jy ! Clean residual min=-0.003772 max=0.003841 Jy/beam ! Clean residual mean=-0.000003 rms=0.000999 Jy/beam ! Combined flux in latest and established models = 0.0439084 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0439084 Jy ! Inverting map and beam ! Estimated beam: bmin=4.651 mas, bmaj=6.213 mas, bpa=-29.52 degrees ! Estimated noise=755.209 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000179496 Jy ! Component: 100 - total flux cleaned = 0.000182777 Jy ! Component: 150 - total flux cleaned = 0.000185381 Jy ! Component: 200 - total flux cleaned = 0.000185444 Jy ! Total flux subtracted in 200 components = 0.000185444 Jy ! Clean residual min=-0.001914 max=0.001916 Jy/beam ! Clean residual mean=-0.000002 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.0440938 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 21 components and 0.0440938 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.716 mas, bmaj=9.87 mas, bpa=26.44 degrees ! Estimated noise=861.092 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000176471 Jy ! Component: 100 - total flux cleaned = 0.000116532 Jy ! Component: 150 - total flux cleaned = 6.71412e-05 Jy ! Component: 200 - total flux cleaned = 3.98811e-05 Jy ! Total flux subtracted in 200 components = 3.98811e-05 Jy ! Clean residual min=-0.001841 max=0.002119 Jy/beam ! Clean residual mean=-0.000002 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.0441337 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.29065e-05 Jy ! Component: 100 - total flux cleaned = -1.33234e-05 Jy ! Component: 150 - total flux cleaned = -1.33185e-05 Jy ! Component: 200 - total flux cleaned = -1.31337e-05 Jy ! Total flux subtracted in 200 components = -1.31337e-05 Jy ! Clean residual min=-0.001831 max=0.002117 Jy/beam ! Clean residual mean=-0.000002 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.0441206 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 28 components and 0.0441206 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.651 mas, bmaj=6.213 mas, bpa=-29.52 degrees ! Estimated noise=755.209 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00012394 Jy ! Component: 100 - total flux cleaned = 9.07778e-05 Jy ! Component: 150 - total flux cleaned = 6.08355e-05 Jy ! Component: 200 - total flux cleaned = 2.1463e-05 Jy ! Total flux subtracted in 200 components = 2.1463e-05 Jy ! Clean residual min=-0.001865 max=0.001965 Jy/beam ! Clean residual mean=-0.000002 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.044142 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 37 components and 0.044142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078341Jy sigma=0.000667 ! Fit after self-cal, rms=0.078336Jy sigma=0.000667 wmodel J1253+4107_S_2017_10_21_pus_map.mod ! Writing 37 model components to file: J1253+4107_S_2017_10_21_pus_map.mod wobs J1253+4107_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1253+4107_S_2017_10_21_pus_uvs.fits wwins J1253+4107_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J1253+4107_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000303212 Jy ! Component: 100 - total flux cleaned = -0.000686635 Jy ! Component: 150 - total flux cleaned = -0.000897498 Jy ! Component: 200 - total flux cleaned = -0.00092637 Jy ! Component: 250 - total flux cleaned = -0.000843332 Jy ! Component: 300 - total flux cleaned = -0.000870253 Jy ! Component: 350 - total flux cleaned = -0.000947741 Jy ! Component: 400 - total flux cleaned = -0.00104967 Jy ! Component: 450 - total flux cleaned = -0.00119849 Jy ! Component: 500 - total flux cleaned = -0.00129549 Jy ! Component: 550 - total flux cleaned = -0.00131924 Jy ! Component: 600 - total flux cleaned = -0.00145885 Jy ! Component: 650 - total flux cleaned = -0.00150417 Jy ! Component: 700 - total flux cleaned = -0.00150405 Jy ! Component: 750 - total flux cleaned = -0.00154827 Jy ! Component: 800 - total flux cleaned = -0.00157003 Jy ! Component: 850 - total flux cleaned = -0.00157087 Jy ! Component: 900 - total flux cleaned = -0.00167515 Jy ! Component: 950 - total flux cleaned = -0.00173629 Jy ! Component: 1000 - total flux cleaned = -0.00171621 Jy ! Component: 1050 - total flux cleaned = -0.00181533 Jy ! Component: 1100 - total flux cleaned = -0.00189282 Jy ! Component: 1150 - total flux cleaned = -0.00193066 Jy ! Component: 1200 - total flux cleaned = -0.00196808 Jy ! Component: 1250 - total flux cleaned = -0.00194991 Jy ! Component: 1300 - total flux cleaned = -0.00200475 Jy ! Component: 1350 - total flux cleaned = -0.00207622 Jy ! Component: 1400 - total flux cleaned = -0.00207615 Jy ! Component: 1450 - total flux cleaned = -0.0020937 Jy ! Component: 1500 - total flux cleaned = -0.00212801 Jy ! Component: 1550 - total flux cleaned = -0.00214466 Jy ! Component: 1600 - total flux cleaned = -0.00221145 Jy ! Component: 1650 - total flux cleaned = -0.00219514 Jy ! Component: 1700 - total flux cleaned = -0.00229301 Jy ! Component: 1750 - total flux cleaned = -0.00229322 Jy ! Component: 1800 - total flux cleaned = -0.00243679 Jy ! Component: 1850 - total flux cleaned = -0.00245262 Jy ! Component: 1900 - total flux cleaned = -0.00256179 Jy ! Component: 1950 - total flux cleaned = -0.00266952 Jy ! Component: 2000 - total flux cleaned = -0.00269984 Jy ! Component: 2050 - total flux cleaned = -0.00283526 Jy ! Component: 2100 - total flux cleaned = -0.00293915 Jy ! Component: 2150 - total flux cleaned = -0.00301273 Jy ! Component: 2200 - total flux cleaned = -0.00314371 Jy ! Component: 2250 - total flux cleaned = -0.00323012 Jy ! Component: 2300 - total flux cleaned = -0.00332989 Jy ! Component: 2350 - total flux cleaned = -0.00344278 Jy ! Component: 2400 - total flux cleaned = -0.00352657 Jy ! Component: 2450 - total flux cleaned = -0.00356808 Jy ! Component: 2500 - total flux cleaned = -0.00365033 Jy ! Component: 2550 - total flux cleaned = -0.00378597 Jy ! Component: 2600 - total flux cleaned = -0.00385304 Jy ! Component: 2650 - total flux cleaned = -0.00391974 Jy ! Component: 2700 - total flux cleaned = -0.00403852 Jy ! Component: 2750 - total flux cleaned = -0.00413002 Jy ! Component: 2800 - total flux cleaned = -0.00422107 Jy ! Component: 2850 - total flux cleaned = -0.00436296 Jy ! Component: 2900 - total flux cleaned = -0.00449072 Jy ! Component: 2950 - total flux cleaned = -0.00459203 Jy ! Component: 3000 - total flux cleaned = -0.00471782 Jy ! Component: 3050 - total flux cleaned = -0.0047803 Jy ! Component: 3100 - total flux cleaned = -0.00494127 Jy ! Component: 3150 - total flux cleaned = -0.00505194 Jy ! Component: 3200 - total flux cleaned = -0.00510072 Jy ! Component: 3250 - total flux cleaned = -0.00522165 Jy ! Component: 3300 - total flux cleaned = -0.00530578 Jy ! Component: 3350 - total flux cleaned = -0.00540124 Jy ! Component: 3400 - total flux cleaned = -0.00550784 Jy ! Component: 3450 - total flux cleaned = -0.00562543 Jy ! Component: 3500 - total flux cleaned = -0.00564881 Jy ! Component: 3550 - total flux cleaned = -0.00577657 Jy ! Component: 3600 - total flux cleaned = -0.00583418 Jy ! Component: 3650 - total flux cleaned = -0.00591435 Jy ! Component: 3700 - total flux cleaned = -0.00600547 Jy ! Component: 3750 - total flux cleaned = -0.00607341 Jy ! Component: 3800 - total flux cleaned = -0.00619716 Jy ! Component: 3850 - total flux cleaned = -0.00630914 Jy ! Component: 3900 - total flux cleaned = -0.00635364 Jy ! Component: 3950 - total flux cleaned = -0.00645327 Jy ! Component: 4000 - total flux cleaned = -0.00656333 Jy ! Component: 4050 - total flux cleaned = -0.00662902 Jy ! Total flux subtracted in 4096 components = -0.00672705 Jy ! Clean residual min=-0.000633 max=0.000714 Jy/beam ! Clean residual mean=-0.000003 rms=0.000197 Jy/beam ! Combined flux in latest and established models = 0.037415 Jy keep ! Adding 272 model components to the UV plane model. ! The established model now contains 309 components and 0.037415 Jy ![Exited script file: muppet] wmap "J1253+4107_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.651 x 6.213 at -29.52 degrees (North through East) ! Clean map min=-0.0012749 max=0.042528 Jy/beam ! Writing clean map to FITS file: J1253+4107_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0425279 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000193807 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.36715 1.36715 2.73431 5.46862 10.9372 21.8745 43.7489 87.4979 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.042 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.651 x 6.213 at -29.52 degrees (North through East) ! Clean map min=-0.0012749 max=0.042528 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1253+4107_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:58:19 2019