! Started logfile: J1252-3319_S_2017_02_19_pus_uvs.log on Sat May 4 18:51:27 2019 obs J1252-3319_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J1252-3319_S_2017_02_19_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.611696 visibilities/baseline/integration-bin. ! Found source: J1252-3319 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 8368 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1252-3319_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 158 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 158 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 158 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 415 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.864131Jy sigma=0.005474 ! Fit after self-cal, rms=0.843399Jy sigma=0.005355 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.361 mas, bmaj=6.094 mas, bpa=-4.328 degrees ! Estimated noise=2198.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.123941 Jy ! Component: 100 - total flux cleaned = 0.152248 Jy ! Total flux subtracted in 100 components = 0.152248 Jy ! Clean residual min=-0.007366 max=0.010396 Jy/beam ! Clean residual mean=0.000027 rms=0.001894 Jy/beam ! Combined flux in latest and established models = 0.152248 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.152248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116545Jy sigma=0.000668 ! Fit after self-cal, rms=0.116521Jy sigma=0.000668 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.854 mas, bmaj=7.205 mas, bpa=-3.242 degrees ! Estimated noise=1370.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0125406 Jy ! Component: 100 - total flux cleaned = 0.0174565 Jy ! Component: 150 - total flux cleaned = 0.0197145 Jy ! Component: 200 - total flux cleaned = 0.020931 Jy ! Total flux subtracted in 200 components = 0.020931 Jy ! Clean residual min=-0.005441 max=0.004872 Jy/beam ! Clean residual mean=0.000006 rms=0.001286 Jy/beam ! Combined flux in latest and established models = 0.173179 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 26 components and 0.173179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115116Jy sigma=0.000661 ! Fit after self-cal, rms=0.115080Jy sigma=0.000661 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.00* KP 1.07 ! LA 1.02 MK 0.95 NL 0.92 OV 1.01 ! PT 1.00* SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.00* KP 0.98 ! LA 0.96 MK 0.97 NL 1.10 OV 1.10 ! PT 1.00* SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.07 HN 1.00* KP 0.87 ! LA 0.78 MK 1.00 NL 1.22 OV 0.97 ! PT 1.00* SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.07 HN 1.00* KP 1.00* ! LA 0.85 MK 1.14 NL 1.00* OV 1.11 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.115080Jy sigma=0.000661 ! Fit after self-cal, rms=0.111303Jy sigma=0.000651 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.849 mas, bmaj=7.199 mas, bpa=-3.028 degrees ! Estimated noise=1367.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000423024 Jy ! Component: 100 - total flux cleaned = 0.000401439 Jy ! Component: 150 - total flux cleaned = 0.000401274 Jy ! Component: 200 - total flux cleaned = 0.000383015 Jy ! Total flux subtracted in 200 components = 0.000383015 Jy ! Clean residual min=-0.003716 max=0.003835 Jy/beam ! Clean residual mean=0.000002 rms=0.000883 Jy/beam ! Combined flux in latest and established models = 0.173562 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 33 components and 0.173562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111295Jy sigma=0.000651 ! Fit after self-cal, rms=0.111294Jy sigma=0.000650 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111294Jy sigma=0.000650 ! Fit after self-cal, rms=0.111494Jy sigma=0.000650 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.846 mas, bmaj=7.19 mas, bpa=-3.073 degrees ! Estimated noise=1366.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000346798 Jy ! Component: 100 - total flux cleaned = 0.000311625 Jy ! Component: 150 - total flux cleaned = 0.000310409 Jy ! Component: 200 - total flux cleaned = 0.000309529 Jy ! Total flux subtracted in 200 components = 0.000309529 Jy ! Clean residual min=-0.003631 max=0.003693 Jy/beam ! Clean residual mean=0.000002 rms=0.000845 Jy/beam ! Combined flux in latest and established models = 0.173872 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 36 components and 0.173872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111489Jy sigma=0.000650 ! Fit after self-cal, rms=0.111505Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-30, -63.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00235556 Jy ! Component: 100 - total flux cleaned = 0.00265196 Jy ! Component: 150 - total flux cleaned = 0.00257201 Jy ! Component: 200 - total flux cleaned = 0.00238192 Jy ! Total flux subtracted in 200 components = 0.00238192 Jy ! Clean residual min=-0.003302 max=0.002934 Jy/beam ! Clean residual mean=-0.000000 rms=0.000774 Jy/beam ! Combined flux in latest and established models = 0.176253 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 57 components and 0.176254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111388Jy sigma=0.000649 ! Fit after self-cal, rms=0.111388Jy sigma=0.000649 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111388Jy sigma=0.000649 ! Fit after self-cal, rms=0.111262Jy sigma=0.000649 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.843 mas, bmaj=7.185 mas, bpa=-3.077 degrees ! Estimated noise=1361.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000463105 Jy ! Component: 100 - total flux cleaned = 0.000271674 Jy ! Component: 150 - total flux cleaned = 0.000270683 Jy ! Component: 200 - total flux cleaned = 0.000268725 Jy ! Total flux subtracted in 200 components = 0.000268725 Jy ! Clean residual min=-0.003162 max=0.002849 Jy/beam ! Clean residual mean=0.000001 rms=0.000736 Jy/beam ! Combined flux in latest and established models = 0.176522 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 78 components and 0.176522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111233Jy sigma=0.000649 ! Fit after self-cal, rms=0.111246Jy sigma=0.000649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.28438e-05 Jy ! Component: 100 - total flux cleaned = 3.29822e-05 Jy ! Component: 150 - total flux cleaned = 3.3316e-05 Jy ! Component: 200 - total flux cleaned = 8.00414e-06 Jy ! Total flux subtracted in 200 components = 8.00414e-06 Jy ! Clean residual min=-0.003111 max=0.002841 Jy/beam ! Clean residual mean=0.000000 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 0.17653 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 85 components and 0.17653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111233Jy sigma=0.000648 ! Fit after self-cal, rms=0.111234Jy sigma=0.000648 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111234Jy sigma=0.000648 ! Fit after self-cal, rms=0.111287Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.021 mas, bmaj=20.56 mas, bpa=2.772 degrees ! Estimated noise=1863.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.51154e-05 Jy ! Component: 100 - total flux cleaned = 0.000197405 Jy ! Component: 150 - total flux cleaned = 0.00030159 Jy ! Component: 200 - total flux cleaned = 0.000253063 Jy ! Total flux subtracted in 200 components = 0.000253063 Jy ! Clean residual min=-0.003476 max=0.003958 Jy/beam ! Clean residual mean=-0.000000 rms=0.001018 Jy/beam ! Combined flux in latest and established models = 0.176783 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 95 components and 0.176783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111282Jy sigma=0.000648 ! Fit after self-cal, rms=0.111287Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000114115 Jy ! Component: 100 - total flux cleaned = -0.000160945 Jy ! Component: 150 - total flux cleaned = -0.00020474 Jy ! Component: 200 - total flux cleaned = -0.000225788 Jy ! Total flux subtracted in 200 components = -0.000225788 Jy ! Clean residual min=-0.003459 max=0.003839 Jy/beam ! Clean residual mean=-0.000001 rms=0.001003 Jy/beam ! Combined flux in latest and established models = 0.176557 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 99 components and 0.176557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111286Jy sigma=0.000648 ! Fit after self-cal, rms=0.111289Jy sigma=0.000648 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.842 mas, bmaj=7.184 mas, bpa=-3.073 degrees ! Estimated noise=1362.17 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.842 x 7.184 at -3.073 degrees (North through East) ! Clean map min=-0.0033195 max=0.15838 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.345 mas, bmaj=6.066 mas, bpa=-4.149 degrees ! Estimated noise=2172.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.122354 Jy ! Component: 100 - total flux cleaned = 0.150699 Jy ! Component: 150 - total flux cleaned = 0.161616 Jy ! Component: 200 - total flux cleaned = 0.167818 Jy ! Total flux subtracted in 200 components = 0.167818 Jy ! Clean residual min=-0.004996 max=0.004100 Jy/beam ! Clean residual mean=0.000011 rms=0.001114 Jy/beam ! Combined flux in latest and established models = 0.167818 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.167818 Jy ! Inverting map and beam ! Estimated beam: bmin=2.842 mas, bmaj=7.184 mas, bpa=-3.073 degrees ! Estimated noise=1362.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00446796 Jy ! Component: 100 - total flux cleaned = 0.00588635 Jy ! Component: 150 - total flux cleaned = 0.00699384 Jy ! Component: 200 - total flux cleaned = 0.00746076 Jy ! Total flux subtracted in 200 components = 0.00746076 Jy ! Clean residual min=-0.003370 max=0.002897 Jy/beam ! Clean residual mean=0.000002 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 0.175279 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 46 components and 0.175279 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.021 mas, bmaj=20.56 mas, bpa=2.772 degrees ! Estimated noise=1863.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000820413 Jy ! Component: 100 - total flux cleaned = 0.00114398 Jy ! Component: 150 - total flux cleaned = 0.00139649 Jy ! Component: 200 - total flux cleaned = 0.00136192 Jy ! Total flux subtracted in 200 components = 0.00136192 Jy ! Clean residual min=-0.003520 max=0.003976 Jy/beam ! Clean residual mean=-0.000000 rms=0.001015 Jy/beam ! Combined flux in latest and established models = 0.176641 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.49728e-05 Jy ! Component: 100 - total flux cleaned = -0.000123656 Jy ! Component: 150 - total flux cleaned = -0.000177355 Jy ! Component: 200 - total flux cleaned = -0.000201904 Jy ! Total flux subtracted in 200 components = -0.000201904 Jy ! Clean residual min=-0.003467 max=0.003863 Jy/beam ! Clean residual mean=-0.000001 rms=0.001002 Jy/beam ! Combined flux in latest and established models = 0.176439 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 72 components and 0.176439 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.842 mas, bmaj=7.184 mas, bpa=-3.073 degrees ! Estimated noise=1362.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000828341 Jy ! Component: 100 - total flux cleaned = -0.000906799 Jy ! Component: 150 - total flux cleaned = -0.000875449 Jy ! Component: 200 - total flux cleaned = -0.000906867 Jy ! Total flux subtracted in 200 components = -0.000906867 Jy ! Clean residual min=-0.003126 max=0.002759 Jy/beam ! Clean residual mean=0.000000 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.175532 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 94 components and 0.175532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111302Jy sigma=0.000649 ! Fit after self-cal, rms=0.111304Jy sigma=0.000649 wmodel J1252-3319_S_2017_02_19_pus_map.mod ! Writing 94 model components to file: J1252-3319_S_2017_02_19_pus_map.mod wobs J1252-3319_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J1252-3319_S_2017_02_19_pus_uvs.fits wwins J1252-3319_S_2017_02_19_pus_map.win ! wwins: Wrote 2 windows to J1252-3319_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00068417 Jy ! Component: 100 - total flux cleaned = -0.00093423 Jy ! Component: 150 - total flux cleaned = -0.00107068 Jy ! Component: 200 - total flux cleaned = -0.00120057 Jy ! Component: 250 - total flux cleaned = -0.00107506 Jy ! Component: 300 - total flux cleaned = -0.000954805 Jy ! Component: 350 - total flux cleaned = -0.000762328 Jy ! Component: 400 - total flux cleaned = -0.000613321 Jy ! Component: 450 - total flux cleaned = -0.000612776 Jy ! Component: 500 - total flux cleaned = -0.000647399 Jy ! Component: 550 - total flux cleaned = -0.00054529 Jy ! Component: 600 - total flux cleaned = -0.000610572 Jy ! Component: 650 - total flux cleaned = -0.000515057 Jy ! Component: 700 - total flux cleaned = -0.000485239 Jy ! Component: 750 - total flux cleaned = -0.000484613 Jy ! Component: 800 - total flux cleaned = -0.000455585 Jy ! Component: 850 - total flux cleaned = -0.000455793 Jy ! Component: 900 - total flux cleaned = -0.000596658 Jy ! Component: 950 - total flux cleaned = -0.000595984 Jy ! Component: 1000 - total flux cleaned = -0.000623314 Jy ! Component: 1050 - total flux cleaned = -0.000651048 Jy ! Component: 1100 - total flux cleaned = -0.000806249 Jy ! Component: 1150 - total flux cleaned = -0.000932491 Jy ! Component: 1200 - total flux cleaned = -0.000981909 Jy ! Component: 1250 - total flux cleaned = -0.00107914 Jy ! Component: 1300 - total flux cleaned = -0.00115022 Jy ! Component: 1350 - total flux cleaned = -0.00119678 Jy ! Component: 1400 - total flux cleaned = -0.00126545 Jy ! Component: 1450 - total flux cleaned = -0.00133249 Jy ! Component: 1500 - total flux cleaned = -0.0013762 Jy ! Component: 1550 - total flux cleaned = -0.00137558 Jy ! Component: 1600 - total flux cleaned = -0.00144016 Jy ! Component: 1650 - total flux cleaned = -0.00152397 Jy ! Component: 1700 - total flux cleaned = -0.00150298 Jy ! Component: 1750 - total flux cleaned = -0.00158511 Jy ! Component: 1800 - total flux cleaned = -0.00162543 Jy ! Component: 1850 - total flux cleaned = -0.00160562 Jy ! Component: 1900 - total flux cleaned = -0.00160533 Jy ! Component: 1950 - total flux cleaned = -0.00154678 Jy ! Component: 2000 - total flux cleaned = -0.00150852 Jy ! Component: 2050 - total flux cleaned = -0.00150851 Jy ! Component: 2100 - total flux cleaned = -0.00154546 Jy ! Component: 2150 - total flux cleaned = -0.00141582 Jy ! Component: 2200 - total flux cleaned = -0.00136089 Jy ! Component: 2250 - total flux cleaned = -0.00134282 Jy ! Component: 2300 - total flux cleaned = -0.00127137 Jy ! Component: 2350 - total flux cleaned = -0.00121847 Jy ! Component: 2400 - total flux cleaned = -0.0011661 Jy ! Component: 2450 - total flux cleaned = -0.00121805 Jy ! Component: 2500 - total flux cleaned = -0.00116648 Jy ! Component: 2550 - total flux cleaned = -0.00111541 Jy ! Component: 2600 - total flux cleaned = -0.0010986 Jy ! Component: 2650 - total flux cleaned = -0.00108184 Jy ! Component: 2700 - total flux cleaned = -0.00104869 Jy ! Component: 2750 - total flux cleaned = -0.000999374 Jy ! Component: 2800 - total flux cleaned = -0.000966894 Jy ! Component: 2850 - total flux cleaned = -0.000918626 Jy ! Component: 2900 - total flux cleaned = -0.000854966 Jy ! Component: 2950 - total flux cleaned = -0.000807826 Jy ! Component: 3000 - total flux cleaned = -0.00077647 Jy ! Component: 3050 - total flux cleaned = -0.000745405 Jy ! Component: 3100 - total flux cleaned = -0.000745525 Jy ! Component: 3150 - total flux cleaned = -0.000714982 Jy ! Component: 3200 - total flux cleaned = -0.000699681 Jy ! Component: 3250 - total flux cleaned = -0.000684334 Jy ! Component: 3300 - total flux cleaned = -0.000609596 Jy ! Component: 3350 - total flux cleaned = -0.000565324 Jy ! Component: 3400 - total flux cleaned = -0.00058018 Jy ! Component: 3450 - total flux cleaned = -0.000536405 Jy ! Component: 3500 - total flux cleaned = -0.000536417 Jy ! Component: 3550 - total flux cleaned = -0.000507547 Jy ! Component: 3600 - total flux cleaned = -0.0003935 Jy ! Component: 3650 - total flux cleaned = -0.000379491 Jy ! Component: 3700 - total flux cleaned = -0.000309211 Jy ! Component: 3750 - total flux cleaned = -0.000337263 Jy ! Component: 3800 - total flux cleaned = -0.000309491 Jy ! Component: 3850 - total flux cleaned = -0.000254216 Jy ! Component: 3900 - total flux cleaned = -0.000254259 Jy ! Component: 3950 - total flux cleaned = -0.000213241 Jy ! Component: 4000 - total flux cleaned = -0.000226766 Jy ! Component: 4050 - total flux cleaned = -0.000159081 Jy ! Total flux subtracted in 4096 components = -0.000132194 Jy ! Clean residual min=-0.000851 max=0.000818 Jy/beam ! Clean residual mean=-0.000001 rms=0.000235 Jy/beam ! Combined flux in latest and established models = 0.1754 Jy keep ! Adding 261 model components to the UV plane model. ! The established model now contains 355 components and 0.1754 Jy ![Exited script file: muppet] wmap "J1252-3319_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.842 x 7.184 at -3.073 degrees (North through East) ! Clean map min=-0.0025718 max=0.15868 Jy/beam ! Writing clean map to FITS file: J1252-3319_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.158684 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000226648 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.428487 0.428487 0.856975 1.71395 3.4279 6.8558 13.7116 27.4232 54.8464 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.158 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.842 x 7.184 at -3.073 degrees (North through East) ! Clean map min=-0.0025718 max=0.15868 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1252-3319_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:51:31 2019