! Started logfile: J1251-3440_S_2017_10_09_pus_uvs.log on Sun May 12 13:13:13 2019 obs J1251-3440_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1251-3440_S_2017_10_09_pus_uva.fits ! AN table 1: 144 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.489005 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1251-3440 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 10140 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1251-3440_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 393 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 465 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 772 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1048 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.996697Jy sigma=0.006519 ! Fit after self-cal, rms=0.937621Jy sigma=0.006140 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.83 mas, bmaj=16.51 mas, bpa=-10.99 degrees ! Estimated noise=2199.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0504495 Jy ! Component: 100 - total flux cleaned = 0.0618234 Jy ! Total flux subtracted in 100 components = 0.0618234 Jy ! Clean residual min=-0.006562 max=0.005979 Jy/beam ! Clean residual mean=-0.000044 rms=0.001771 Jy/beam ! Combined flux in latest and established models = 0.0618234 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0618234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103464Jy sigma=0.000615 ! Fit after self-cal, rms=0.102268Jy sigma=0.000607 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.381 mas, bmaj=20.05 mas, bpa=-12.17 degrees ! Estimated noise=1389.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0077605 Jy ! Component: 100 - total flux cleaned = 0.0116518 Jy ! Component: 150 - total flux cleaned = 0.0133316 Jy ! Component: 200 - total flux cleaned = 0.0137875 Jy ! Total flux subtracted in 200 components = 0.0137875 Jy ! Clean residual min=-0.003015 max=0.004045 Jy/beam ! Clean residual mean=-0.000018 rms=0.001046 Jy/beam ! Combined flux in latest and established models = 0.075611 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 51 components and 0.075611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101597Jy sigma=0.000603 ! Fit after self-cal, rms=0.101406Jy sigma=0.000603 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.96 HN 1.08 KP 1.06 ! LA 1.01 MK 1.02 NL 0.82 OV 1.00* ! PT 1.07 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.12 KP 0.96 ! LA 0.94 MK 1.09 NL 0.96 OV 1.00* ! PT 0.93 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.02 HN 1.17 KP 0.93 ! LA 0.90 MK 1.05 NL 0.90 OV 1.00* ! PT 1.02 ! ! ! Correcting IF 4. ! A total of 96 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 0.88 KP 1.00* ! LA 1.00* MK 0.93 NL 1.00* OV 1.00* ! PT 1.00 ! ! ! Fit before self-cal, rms=0.101406Jy sigma=0.000603 ! Fit after self-cal, rms=0.098018Jy sigma=0.000603 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.473 mas, bmaj=20.4 mas, bpa=-12.13 degrees ! Estimated noise=1399.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000119867 Jy ! Component: 100 - total flux cleaned = 8.06298e-05 Jy ! Component: 150 - total flux cleaned = 0.000112273 Jy ! Component: 200 - total flux cleaned = 0.000112263 Jy ! Total flux subtracted in 200 components = 0.000112263 Jy ! Clean residual min=-0.003463 max=0.003586 Jy/beam ! Clean residual mean=-0.000002 rms=0.000947 Jy/beam ! Combined flux in latest and established models = 0.0757232 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 63 components and 0.0757232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097995Jy sigma=0.000603 ! Fit after self-cal, rms=0.097804Jy sigma=0.000603 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097804Jy sigma=0.000603 ! Fit after self-cal, rms=0.097024Jy sigma=0.000602 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.472 mas, bmaj=20.26 mas, bpa=-12.03 degrees ! Estimated noise=1392.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.78664e-05 Jy ! Component: 100 - total flux cleaned = 9.81859e-05 Jy ! Component: 150 - total flux cleaned = 9.81692e-05 Jy ! Component: 200 - total flux cleaned = 9.8752e-05 Jy ! Total flux subtracted in 200 components = 9.8752e-05 Jy ! Clean residual min=-0.002887 max=0.003566 Jy/beam ! Clean residual mean=-0.000020 rms=0.000821 Jy/beam ! Combined flux in latest and established models = 0.075822 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 69 components and 0.075822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097012Jy sigma=0.000601 ! Fit after self-cal, rms=0.097039Jy sigma=0.000601 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.36023e-05 Jy ! Component: 100 - total flux cleaned = 0.000118596 Jy ! Component: 150 - total flux cleaned = 0.000118019 Jy ! Component: 200 - total flux cleaned = 0.00013561 Jy ! Total flux subtracted in 200 components = 0.00013561 Jy ! Clean residual min=-0.003092 max=0.003444 Jy/beam ! Clean residual mean=-0.000019 rms=0.000832 Jy/beam ! Combined flux in latest and established models = 0.0759576 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 80 components and 0.0759576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097031Jy sigma=0.000601 ! Fit after self-cal, rms=0.097030Jy sigma=0.000601 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097030Jy sigma=0.000601 ! Fit after self-cal, rms=0.097111Jy sigma=0.000601 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.466 mas, bmaj=20.11 mas, bpa=-11.95 degrees ! Estimated noise=1388.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00015119 Jy ! Component: 100 - total flux cleaned = 8.6244e-05 Jy ! Component: 150 - total flux cleaned = 0.000105431 Jy ! Component: 200 - total flux cleaned = 0.000105809 Jy ! Total flux subtracted in 200 components = 0.000105809 Jy ! Clean residual min=-0.003035 max=0.003482 Jy/beam ! Clean residual mean=-0.000023 rms=0.000820 Jy/beam ! Combined flux in latest and established models = 0.0760634 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 91 components and 0.0760634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097103Jy sigma=0.000601 ! Fit after self-cal, rms=0.097127Jy sigma=0.000601 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-70, -17). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00319977 Jy ! Component: 100 - total flux cleaned = 0.00370324 Jy ! Component: 150 - total flux cleaned = 0.00386024 Jy ! Component: 200 - total flux cleaned = 0.00390092 Jy ! Total flux subtracted in 200 components = 0.00390092 Jy ! Clean residual min=-0.002756 max=0.003009 Jy/beam ! Clean residual mean=-0.000019 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 0.0799643 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 118 components and 0.0799643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097013Jy sigma=0.000600 ! Fit after self-cal, rms=0.096916Jy sigma=0.000600 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096916Jy sigma=0.000600 ! Fit after self-cal, rms=0.096613Jy sigma=0.000600 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.268 mas, bmaj=29.27 mas, bpa=-2.889 degrees ! Estimated noise=1648.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130961 Jy ! Component: 100 - total flux cleaned = 0.0016762 Jy ! Component: 150 - total flux cleaned = 0.00198294 Jy ! Component: 200 - total flux cleaned = 0.00226749 Jy ! Total flux subtracted in 200 components = 0.00226749 Jy ! Clean residual min=-0.002813 max=0.003026 Jy/beam ! Clean residual mean=-0.000028 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 0.0822318 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 133 components and 0.0822318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096568Jy sigma=0.000599 ! Fit after self-cal, rms=0.096580Jy sigma=0.000599 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000588099 Jy ! Component: 100 - total flux cleaned = 0.000817706 Jy ! Component: 150 - total flux cleaned = 0.000817641 Jy ! Component: 200 - total flux cleaned = 0.000816988 Jy ! Total flux subtracted in 200 components = 0.000816988 Jy ! Clean residual min=-0.002810 max=0.002883 Jy/beam ! Clean residual mean=-0.000022 rms=0.000762 Jy/beam ! Combined flux in latest and established models = 0.0830488 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 142 components and 0.0830488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096553Jy sigma=0.000599 ! Fit after self-cal, rms=0.096525Jy sigma=0.000599 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.464 mas, bmaj=20 mas, bpa=-11.91 degrees ! Estimated noise=1379.06 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.464 x 20 at -11.91 degrees (North through East) ! Clean map min=-0.0029871 max=0.064937 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.845 mas, bmaj=16.54 mas, bpa=-10.9 degrees ! Estimated noise=2216.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0503864 Jy ! Component: 100 - total flux cleaned = 0.0630695 Jy ! Component: 150 - total flux cleaned = 0.0705759 Jy ! Component: 200 - total flux cleaned = 0.0748311 Jy ! Total flux subtracted in 200 components = 0.0748311 Jy ! Clean residual min=-0.005721 max=0.005700 Jy/beam ! Clean residual mean=-0.000032 rms=0.001678 Jy/beam ! Combined flux in latest and established models = 0.0748311 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.0748311 Jy ! Inverting map and beam ! Estimated beam: bmin=3.464 mas, bmaj=20 mas, bpa=-11.91 degrees ! Estimated noise=1379.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00480401 Jy ! Component: 100 - total flux cleaned = 0.00663724 Jy ! Component: 150 - total flux cleaned = 0.0073593 Jy ! Component: 200 - total flux cleaned = 0.00788245 Jy ! Total flux subtracted in 200 components = 0.00788245 Jy ! Clean residual min=-0.003363 max=0.003023 Jy/beam ! Clean residual mean=-0.000028 rms=0.000821 Jy/beam ! Combined flux in latest and established models = 0.0827135 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 70 components and 0.0827135 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.268 mas, bmaj=29.27 mas, bpa=-2.889 degrees ! Estimated noise=1648.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000248228 Jy ! Component: 100 - total flux cleaned = 0.00016016 Jy ! Component: 150 - total flux cleaned = 0.0005653 Jy ! Component: 200 - total flux cleaned = 0.000867715 Jy ! Total flux subtracted in 200 components = 0.000867715 Jy ! Clean residual min=-0.003036 max=0.002761 Jy/beam ! Clean residual mean=-0.000017 rms=0.000774 Jy/beam ! Combined flux in latest and established models = 0.0835812 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000129552 Jy ! Component: 100 - total flux cleaned = 0.000199968 Jy ! Component: 150 - total flux cleaned = 0.000243866 Jy ! Component: 200 - total flux cleaned = 0.000305324 Jy ! Total flux subtracted in 200 components = 0.000305324 Jy ! Clean residual min=-0.002939 max=0.002724 Jy/beam ! Clean residual mean=-0.000013 rms=0.000760 Jy/beam ! Combined flux in latest and established models = 0.0838866 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 117 components and 0.0838866 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.464 mas, bmaj=20 mas, bpa=-11.91 degrees ! Estimated noise=1379.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000344612 Jy ! Component: 100 - total flux cleaned = -0.00045079 Jy ! Component: 150 - total flux cleaned = -0.000500077 Jy ! Component: 200 - total flux cleaned = -0.000462743 Jy ! Total flux subtracted in 200 components = -0.000462743 Jy ! Clean residual min=-0.003200 max=0.002674 Jy/beam ! Clean residual mean=-0.000011 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 0.0834238 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 137 components and 0.0834238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096492Jy sigma=0.000599 ! Fit after self-cal, rms=0.096441Jy sigma=0.000598 wmodel J1251-3440_S_2017_10_09_pus_map.mod ! Writing 137 model components to file: J1251-3440_S_2017_10_09_pus_map.mod wobs J1251-3440_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1251-3440_S_2017_10_09_pus_uvs.fits wwins J1251-3440_S_2017_10_09_pus_map.win ! wwins: Wrote 2 windows to J1251-3440_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000128544 Jy ! Component: 100 - total flux cleaned = 0.000181471 Jy ! Component: 150 - total flux cleaned = 0.00046604 Jy ! Component: 200 - total flux cleaned = 0.000695945 Jy ! Component: 250 - total flux cleaned = 0.000806356 Jy ! Component: 300 - total flux cleaned = 0.000875489 Jy ! Component: 350 - total flux cleaned = 0.000908583 Jy ! Component: 400 - total flux cleaned = 0.000876299 Jy ! Component: 450 - total flux cleaned = 0.000782762 Jy ! Component: 500 - total flux cleaned = 0.000693255 Jy ! Component: 550 - total flux cleaned = 0.000606756 Jy ! Component: 600 - total flux cleaned = 0.000551283 Jy ! Component: 650 - total flux cleaned = 0.000444948 Jy ! Component: 700 - total flux cleaned = 0.000367495 Jy ! Component: 750 - total flux cleaned = 0.000316313 Jy ! Component: 800 - total flux cleaned = 0.000192796 Jy ! Component: 850 - total flux cleaned = 0.000168645 Jy ! Component: 900 - total flux cleaned = 0.000145327 Jy ! Component: 950 - total flux cleaned = 0.000191208 Jy ! Component: 1000 - total flux cleaned = 0.000168713 Jy ! Component: 1050 - total flux cleaned = 0.000190879 Jy ! Component: 1100 - total flux cleaned = 0.000191115 Jy ! Component: 1150 - total flux cleaned = 0.000127706 Jy ! Component: 1200 - total flux cleaned = 0.000127793 Jy ! Component: 1250 - total flux cleaned = 6.67122e-05 Jy ! Component: 1300 - total flux cleaned = 0.000106857 Jy ! Component: 1350 - total flux cleaned = 6.74485e-05 Jy ! Component: 1400 - total flux cleaned = 8.70468e-05 Jy ! Component: 1450 - total flux cleaned = 6.8229e-05 Jy ! Component: 1500 - total flux cleaned = 3.06895e-05 Jy ! Component: 1550 - total flux cleaned = 1.24069e-05 Jy ! Component: 1600 - total flux cleaned = 2.98884e-05 Jy ! Component: 1650 - total flux cleaned = -5.94748e-05 Jy ! Component: 1700 - total flux cleaned = -7.6599e-05 Jy ! Component: 1750 - total flux cleaned = -0.000110864 Jy ! Component: 1800 - total flux cleaned = -0.000145096 Jy ! Component: 1850 - total flux cleaned = -0.000212295 Jy ! Component: 1900 - total flux cleaned = -0.000295197 Jy ! Component: 1950 - total flux cleaned = -0.000344264 Jy ! Component: 2000 - total flux cleaned = -0.000376361 Jy ! Component: 2050 - total flux cleaned = -0.000424215 Jy ! Component: 2100 - total flux cleaned = -0.000471758 Jy ! Component: 2150 - total flux cleaned = -0.000565441 Jy ! Component: 2200 - total flux cleaned = -0.000596377 Jy ! Component: 2250 - total flux cleaned = -0.000642499 Jy ! Component: 2300 - total flux cleaned = -0.000688196 Jy ! Component: 2350 - total flux cleaned = -0.000763467 Jy ! Component: 2400 - total flux cleaned = -0.000778318 Jy ! Component: 2450 - total flux cleaned = -0.000793209 Jy ! Component: 2500 - total flux cleaned = -0.00083728 Jy ! Component: 2550 - total flux cleaned = -0.000895325 Jy ! Component: 2600 - total flux cleaned = -0.000952932 Jy ! Component: 2650 - total flux cleaned = -0.000995646 Jy ! Component: 2700 - total flux cleaned = -0.000995737 Jy ! Component: 2750 - total flux cleaned = -0.00102392 Jy ! Component: 2800 - total flux cleaned = -0.00109361 Jy ! Component: 2850 - total flux cleaned = -0.00117648 Jy ! Component: 2900 - total flux cleaned = -0.00121758 Jy ! Component: 2950 - total flux cleaned = -0.00124481 Jy ! Component: 3000 - total flux cleaned = -0.00125836 Jy ! Component: 3050 - total flux cleaned = -0.00131215 Jy ! Component: 3100 - total flux cleaned = -0.00132545 Jy ! Component: 3150 - total flux cleaned = -0.00137856 Jy ! Component: 3200 - total flux cleaned = -0.00141806 Jy ! Component: 3250 - total flux cleaned = -0.00143109 Jy ! Component: 3300 - total flux cleaned = -0.00147017 Jy ! Component: 3350 - total flux cleaned = -0.00153503 Jy ! Component: 3400 - total flux cleaned = -0.00161253 Jy ! Component: 3450 - total flux cleaned = -0.00168972 Jy ! Component: 3500 - total flux cleaned = -0.00174088 Jy ! Component: 3550 - total flux cleaned = -0.00180466 Jy ! Component: 3600 - total flux cleaned = -0.00184271 Jy ! Component: 3650 - total flux cleaned = -0.00190591 Jy ! Component: 3700 - total flux cleaned = -0.00198138 Jy ! Component: 3750 - total flux cleaned = -0.00206918 Jy ! Component: 3800 - total flux cleaned = -0.00213158 Jy ! Component: 3850 - total flux cleaned = -0.00220614 Jy ! Component: 3900 - total flux cleaned = -0.00229281 Jy ! Component: 3950 - total flux cleaned = -0.0023668 Jy ! Component: 4000 - total flux cleaned = -0.00241595 Jy ! Component: 4050 - total flux cleaned = -0.00248945 Jy ! Total flux subtracted in 4096 components = -0.00255051 Jy ! Clean residual min=-0.000798 max=0.000720 Jy/beam ! Clean residual mean=-0.000002 rms=0.000225 Jy/beam ! Combined flux in latest and established models = 0.0808733 Jy keep ! Adding 300 model components to the UV plane model. ! The established model now contains 437 components and 0.0808733 Jy ![Exited script file: muppet] wmap "J1251-3440_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.464 x 20 at -11.91 degrees (North through East) ! Clean map min=-0.0020338 max=0.064168 Jy/beam ! Writing clean map to FITS file: J1251-3440_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0641681 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000216653 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.0129 1.0129 2.0258 4.0516 8.1032 16.2064 32.4128 64.8256 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.064 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.464 x 20 at -11.91 degrees (North through East) ! Clean map min=-0.0020338 max=0.064168 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1251-3440_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:13:18 2019