! Started logfile: J1251-3440_S_2017_02_19_pus_uvs.log on Sat May 4 18:51:17 2019 obs J1251-3440_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J1251-3440_S_2017_02_19_pus_uva.fits ! AN table 1: 95 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.612865 visibilities/baseline/integration-bin. ! Found source: J1251-3440 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 10480 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1251-3440_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 197 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 197 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 197 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 535 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.996670Jy sigma=0.006118 ! Fit after self-cal, rms=0.939387Jy sigma=0.005795 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.202 mas, bmaj=6.067 mas, bpa=-3.816 degrees ! Estimated noise=2070.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0498212 Jy ! Component: 100 - total flux cleaned = 0.0613569 Jy ! Total flux subtracted in 100 components = 0.0613569 Jy ! Clean residual min=-0.005112 max=0.005575 Jy/beam ! Clean residual mean=0.000007 rms=0.001375 Jy/beam ! Combined flux in latest and established models = 0.0613569 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0613569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114341Jy sigma=0.000630 ! Fit after self-cal, rms=0.113172Jy sigma=0.000623 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.838 mas, bmaj=7.187 mas, bpa=-3.587 degrees ! Estimated noise=1264.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00678255 Jy ! Component: 100 - total flux cleaned = 0.00954378 Jy ! Component: 150 - total flux cleaned = 0.0108292 Jy ! Component: 200 - total flux cleaned = 0.0110097 Jy ! Total flux subtracted in 200 components = 0.0110097 Jy ! Clean residual min=-0.003350 max=0.002935 Jy/beam ! Clean residual mean=-0.000006 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 0.0723666 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 16 components and 0.0723666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112694Jy sigma=0.000622 ! Fit after self-cal, rms=0.112618Jy sigma=0.000621 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.03 HN 1.00* KP 1.05 ! LA 1.01 MK 1.11 NL 0.87 OV 1.10 ! PT 1.00* SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.13 HN 1.00* KP 1.01 ! LA 1.08 MK 1.03 NL 0.89 OV 1.04 ! PT 1.00* SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.80 FD 1.09 HN 1.00* KP 0.92 ! LA 0.83 MK 1.08 NL 1.01 OV 1.01 ! PT 1.00* SC 1.01 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.03 HN 1.00* KP 1.00* ! LA 0.86 MK 0.90 NL 1.00* OV 0.93 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.112618Jy sigma=0.000621 ! Fit after self-cal, rms=0.106635Jy sigma=0.000620 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.881 mas, bmaj=7.2 mas, bpa=-3.427 degrees ! Estimated noise=1260.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000241483 Jy ! Component: 100 - total flux cleaned = -0.000160856 Jy ! Component: 150 - total flux cleaned = -0.000144381 Jy ! Component: 200 - total flux cleaned = -0.000129203 Jy ! Total flux subtracted in 200 components = -0.000129203 Jy ! Clean residual min=-0.002959 max=0.002388 Jy/beam ! Clean residual mean=0.000003 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 0.0722374 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 24 components and 0.0722374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106626Jy sigma=0.000620 ! Fit after self-cal, rms=0.106309Jy sigma=0.000619 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106309Jy sigma=0.000619 ! Fit after self-cal, rms=0.105397Jy sigma=0.000618 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.896 mas, bmaj=7.194 mas, bpa=-3.328 degrees ! Estimated noise=1259.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.83114e-07 Jy ! Component: 100 - total flux cleaned = 6.41383e-05 Jy ! Component: 150 - total flux cleaned = 6.43509e-05 Jy ! Component: 200 - total flux cleaned = 6.45608e-05 Jy ! Total flux subtracted in 200 components = 6.45608e-05 Jy ! Clean residual min=-0.002967 max=0.002562 Jy/beam ! Clean residual mean=0.000002 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.0723019 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 29 components and 0.0723019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105392Jy sigma=0.000618 ! Fit after self-cal, rms=0.105364Jy sigma=0.000618 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.38622e-05 Jy ! Component: 100 - total flux cleaned = 0.000123529 Jy ! Component: 150 - total flux cleaned = 0.000148461 Jy ! Component: 200 - total flux cleaned = 0.000148151 Jy ! Total flux subtracted in 200 components = 0.000148151 Jy ! Clean residual min=-0.003072 max=0.002574 Jy/beam ! Clean residual mean=0.000002 rms=0.000679 Jy/beam ! Combined flux in latest and established models = 0.0724501 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 32 components and 0.0724501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105360Jy sigma=0.000618 ! Fit after self-cal, rms=0.105357Jy sigma=0.000618 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105357Jy sigma=0.000618 ! Fit after self-cal, rms=0.105565Jy sigma=0.000618 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.901 mas, bmaj=7.185 mas, bpa=-3.303 degrees ! Estimated noise=1257.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000108053 Jy ! Component: 100 - total flux cleaned = -0.0001522 Jy ! Component: 150 - total flux cleaned = -0.000178154 Jy ! Component: 200 - total flux cleaned = -0.000202189 Jy ! Total flux subtracted in 200 components = -0.000202189 Jy ! Clean residual min=-0.003099 max=0.002635 Jy/beam ! Clean residual mean=0.000001 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.0722479 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 35 components and 0.0722479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105561Jy sigma=0.000618 ! Fit after self-cal, rms=0.105595Jy sigma=0.000618 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.86937e-05 Jy ! Component: 100 - total flux cleaned = 3.2218e-05 Jy ! Component: 150 - total flux cleaned = 2.03703e-05 Jy ! Component: 200 - total flux cleaned = 9.9931e-06 Jy ! Total flux subtracted in 200 components = 9.9931e-06 Jy ! Clean residual min=-0.003075 max=0.002589 Jy/beam ! Clean residual mean=0.000002 rms=0.000671 Jy/beam ! Combined flux in latest and established models = 0.0722579 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 39 components and 0.0722579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105592Jy sigma=0.000618 ! Fit after self-cal, rms=0.105581Jy sigma=0.000618 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105581Jy sigma=0.000618 ! Fit after self-cal, rms=0.105749Jy sigma=0.000618 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.944 mas, bmaj=21.02 mas, bpa=2.213 degrees ! Estimated noise=1689.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000130453 Jy ! Component: 100 - total flux cleaned = -0.000130257 Jy ! Component: 150 - total flux cleaned = -0.000129644 Jy ! Component: 200 - total flux cleaned = -0.000122202 Jy ! Total flux subtracted in 200 components = -0.000122202 Jy ! Clean residual min=-0.003488 max=0.002890 Jy/beam ! Clean residual mean=0.000004 rms=0.000922 Jy/beam ! Combined flux in latest and established models = 0.0721357 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 42 components and 0.0721357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105748Jy sigma=0.000618 ! Fit after self-cal, rms=0.105769Jy sigma=0.000618 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.87352e-05 Jy ! Component: 100 - total flux cleaned = -1.84477e-05 Jy ! Component: 150 - total flux cleaned = -1.77973e-05 Jy ! Component: 200 - total flux cleaned = -1.08786e-05 Jy ! Total flux subtracted in 200 components = -1.08786e-05 Jy ! Clean residual min=-0.003544 max=0.002895 Jy/beam ! Clean residual mean=0.000004 rms=0.000925 Jy/beam ! Combined flux in latest and established models = 0.0721248 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 42 components and 0.0721248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105769Jy sigma=0.000618 ! Fit after self-cal, rms=0.105772Jy sigma=0.000618 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.905 mas, bmaj=7.188 mas, bpa=-3.298 degrees ! Estimated noise=1257.48 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.905 x 7.188 at -3.298 degrees (North through East) ! Clean map min=-0.0030488 max=0.06462 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.249 mas, bmaj=6.018 mas, bpa=-3.641 degrees ! Estimated noise=2066.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0511508 Jy ! Component: 100 - total flux cleaned = 0.0632131 Jy ! Component: 150 - total flux cleaned = 0.0672416 Jy ! Component: 200 - total flux cleaned = 0.0685621 Jy ! Total flux subtracted in 200 components = 0.0685621 Jy ! Clean residual min=-0.005284 max=0.005582 Jy/beam ! Clean residual mean=0.000005 rms=0.001244 Jy/beam ! Combined flux in latest and established models = 0.0685621 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0685621 Jy ! Inverting map and beam ! Estimated beam: bmin=2.905 mas, bmaj=7.188 mas, bpa=-3.298 degrees ! Estimated noise=1257.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00262085 Jy ! Component: 100 - total flux cleaned = 0.00278533 Jy ! Component: 150 - total flux cleaned = 0.00296253 Jy ! Component: 200 - total flux cleaned = 0.00309724 Jy ! Total flux subtracted in 200 components = 0.00309724 Jy ! Clean residual min=-0.003190 max=0.002527 Jy/beam ! Clean residual mean=0.000003 rms=0.000681 Jy/beam ! Combined flux in latest and established models = 0.0716593 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 24 components and 0.0716593 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.944 mas, bmaj=21.02 mas, bpa=2.213 degrees ! Estimated noise=1689.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000411157 Jy ! Component: 100 - total flux cleaned = 0.000412683 Jy ! Component: 150 - total flux cleaned = 0.000413609 Jy ! Component: 200 - total flux cleaned = 0.000414514 Jy ! Total flux subtracted in 200 components = 0.000414514 Jy ! Clean residual min=-0.003603 max=0.002910 Jy/beam ! Clean residual mean=0.000004 rms=0.000925 Jy/beam ! Combined flux in latest and established models = 0.0720738 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.50173e-06 Jy ! Component: 100 - total flux cleaned = 7.17375e-06 Jy ! Component: 150 - total flux cleaned = 7.43448e-06 Jy ! Component: 200 - total flux cleaned = 1.20682e-05 Jy ! Total flux subtracted in 200 components = 1.20682e-05 Jy ! Clean residual min=-0.003577 max=0.002910 Jy/beam ! Clean residual mean=0.000004 rms=0.000925 Jy/beam ! Combined flux in latest and established models = 0.0720859 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 35 components and 0.0720859 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.905 mas, bmaj=7.188 mas, bpa=-3.298 degrees ! Estimated noise=1257.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000190879 Jy ! Component: 100 - total flux cleaned = -0.000192922 Jy ! Component: 150 - total flux cleaned = -0.000162488 Jy ! Component: 200 - total flux cleaned = -0.000134592 Jy ! Total flux subtracted in 200 components = -0.000134592 Jy ! Clean residual min=-0.003127 max=0.002541 Jy/beam ! Clean residual mean=0.000002 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 0.0719513 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 43 components and 0.0719513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105779Jy sigma=0.000618 ! Fit after self-cal, rms=0.105774Jy sigma=0.000618 wmodel J1251-3440_S_2017_02_19_pus_map.mod ! Writing 43 model components to file: J1251-3440_S_2017_02_19_pus_map.mod wobs J1251-3440_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J1251-3440_S_2017_02_19_pus_uvs.fits wwins J1251-3440_S_2017_02_19_pus_map.win ! wwins: Wrote 1 windows to J1251-3440_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000822758 Jy ! Component: 100 - total flux cleaned = -0.000822972 Jy ! Component: 150 - total flux cleaned = -0.000906592 Jy ! Component: 200 - total flux cleaned = -0.00102596 Jy ! Component: 250 - total flux cleaned = -0.00110333 Jy ! Component: 300 - total flux cleaned = -0.00110401 Jy ! Component: 350 - total flux cleaned = -0.00113963 Jy ! Component: 400 - total flux cleaned = -0.00114008 Jy ! Component: 450 - total flux cleaned = -0.00103949 Jy ! Component: 500 - total flux cleaned = -0.000974234 Jy ! Component: 550 - total flux cleaned = -0.00081554 Jy ! Component: 600 - total flux cleaned = -0.000753619 Jy ! Component: 650 - total flux cleaned = -0.000572807 Jy ! Component: 700 - total flux cleaned = -0.000514267 Jy ! Component: 750 - total flux cleaned = -0.000456871 Jy ! Component: 800 - total flux cleaned = -0.000456305 Jy ! Component: 850 - total flux cleaned = -0.000318064 Jy ! Component: 900 - total flux cleaned = -0.000236795 Jy ! Component: 950 - total flux cleaned = -0.00021115 Jy ! Component: 1000 - total flux cleaned = -0.000184658 Jy ! Component: 1050 - total flux cleaned = -3.21217e-05 Jy ! Component: 1100 - total flux cleaned = 9.30268e-05 Jy ! Component: 1150 - total flux cleaned = 0.000264755 Jy ! Component: 1200 - total flux cleaned = 0.000312985 Jy ! Component: 1250 - total flux cleaned = 0.000431144 Jy ! Component: 1300 - total flux cleaned = 0.000454186 Jy ! Component: 1350 - total flux cleaned = 0.000522967 Jy ! Component: 1400 - total flux cleaned = 0.000545369 Jy ! Component: 1450 - total flux cleaned = 0.000589663 Jy ! Component: 1500 - total flux cleaned = 0.000698804 Jy ! Component: 1550 - total flux cleaned = 0.000655804 Jy ! Component: 1600 - total flux cleaned = 0.000719739 Jy ! Component: 1650 - total flux cleaned = 0.000656704 Jy ! Component: 1700 - total flux cleaned = 0.000718826 Jy ! Component: 1750 - total flux cleaned = 0.000678065 Jy ! Component: 1800 - total flux cleaned = 0.000698271 Jy ! Component: 1850 - total flux cleaned = 0.000658682 Jy ! Component: 1900 - total flux cleaned = 0.00063927 Jy ! Component: 1950 - total flux cleaned = 0.000697789 Jy ! Component: 2000 - total flux cleaned = 0.000659717 Jy ! Component: 2050 - total flux cleaned = 0.000641181 Jy ! Component: 2100 - total flux cleaned = 0.000659878 Jy ! Component: 2150 - total flux cleaned = 0.000604201 Jy ! Component: 2200 - total flux cleaned = 0.000640852 Jy ! Component: 2250 - total flux cleaned = 0.000658943 Jy ! Component: 2300 - total flux cleaned = 0.000712725 Jy ! Component: 2350 - total flux cleaned = 0.000695384 Jy ! Component: 2400 - total flux cleaned = 0.000748338 Jy ! Component: 2450 - total flux cleaned = 0.000783164 Jy ! Component: 2500 - total flux cleaned = 0.000886955 Jy ! Component: 2550 - total flux cleaned = 0.000938281 Jy ! Component: 2600 - total flux cleaned = 0.00103992 Jy ! Component: 2650 - total flux cleaned = 0.00114041 Jy ! Component: 2700 - total flux cleaned = 0.00117361 Jy ! Component: 2750 - total flux cleaned = 0.00125593 Jy ! Component: 2800 - total flux cleaned = 0.00133769 Jy ! Component: 2850 - total flux cleaned = 0.00135418 Jy ! Component: 2900 - total flux cleaned = 0.00138635 Jy ! Component: 2950 - total flux cleaned = 0.00148238 Jy ! Component: 3000 - total flux cleaned = 0.00152992 Jy ! Component: 3050 - total flux cleaned = 0.00160846 Jy ! Component: 3100 - total flux cleaned = 0.0016552 Jy ! Component: 3150 - total flux cleaned = 0.00170175 Jy ! Component: 3200 - total flux cleaned = 0.00177865 Jy ! Component: 3250 - total flux cleaned = 0.00183968 Jy ! Component: 3300 - total flux cleaned = 0.00186991 Jy ! Component: 3350 - total flux cleaned = 0.00194505 Jy ! Component: 3400 - total flux cleaned = 0.00198986 Jy ! Component: 3450 - total flux cleaned = 0.00203438 Jy ! Component: 3500 - total flux cleaned = 0.00206379 Jy ! Component: 3550 - total flux cleaned = 0.00209303 Jy ! Component: 3600 - total flux cleaned = 0.0021365 Jy ! Component: 3650 - total flux cleaned = 0.00219423 Jy ! Component: 3700 - total flux cleaned = 0.0022516 Jy ! Component: 3750 - total flux cleaned = 0.00230866 Jy ! Component: 3800 - total flux cleaned = 0.00236532 Jy ! Component: 3850 - total flux cleaned = 0.00243582 Jy ! Component: 3900 - total flux cleaned = 0.00252002 Jy ! Component: 3950 - total flux cleaned = 0.0025758 Jy ! Component: 4000 - total flux cleaned = 0.00265909 Jy ! Component: 4050 - total flux cleaned = 0.00272821 Jy ! Total flux subtracted in 4096 components = 0.00279685 Jy ! Clean residual min=-0.000787 max=0.001067 Jy/beam ! Clean residual mean=0.000001 rms=0.000230 Jy/beam ! Combined flux in latest and established models = 0.0747482 Jy keep ! Adding 245 model components to the UV plane model. ! The established model now contains 288 components and 0.0747482 Jy ![Exited script file: muppet] wmap "J1251-3440_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.905 x 7.188 at -3.298 degrees (North through East) ! Clean map min=-0.0014043 max=0.064938 Jy/beam ! Writing clean map to FITS file: J1251-3440_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0649383 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000221671 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.02407 1.02407 2.04814 4.09628 8.19256 16.3851 32.7703 65.5405 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.064 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.905 x 7.188 at -3.298 degrees (North through East) ! Clean map min=-0.0014043 max=0.064938 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1251-3440_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:51:22 2019