! Started logfile: J1250-4432_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:48:42 2019 obs J1250-4432_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J1250-4432_S_2017_05_31_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.37115 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1250-4432 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 7616 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1250-4432_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 504 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 517 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 507 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 855 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.845104Jy sigma=0.004725 ! Fit after self-cal, rms=0.828950Jy sigma=0.004645 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.352 mas, bmaj=7.294 mas, bpa=-9.679 degrees ! Estimated noise=3036 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.135374 Jy ! Component: 100 - total flux cleaned = 0.182334 Jy ! Total flux subtracted in 100 components = 0.182334 Jy ! Clean residual min=-0.013214 max=0.024190 Jy/beam ! Clean residual mean=-0.000194 rms=0.004455 Jy/beam ! Combined flux in latest and established models = 0.182333 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.182333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147876Jy sigma=0.000716 ! Fit after self-cal, rms=0.147729Jy sigma=0.000715 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.082 mas, bmaj=8.675 mas, bpa=-10.3 degrees ! Estimated noise=1642.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0257697 Jy ! Component: 100 - total flux cleaned = 0.0369568 Jy ! Component: 150 - total flux cleaned = 0.0420832 Jy ! Component: 200 - total flux cleaned = 0.0434509 Jy ! Total flux subtracted in 200 components = 0.0434509 Jy ! Clean residual min=-0.008793 max=0.014840 Jy/beam ! Clean residual mean=-0.000071 rms=0.003256 Jy/beam ! Combined flux in latest and established models = 0.225784 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 30 components and 0.225784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143841Jy sigma=0.000686 ! Fit after self-cal, rms=0.143835Jy sigma=0.000686 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.00* KP 1.03 ! LA 1.01 MK 1.03 NL 1.62 OV 1.01 ! PT 1.01 SC 0.93 ! ! ! Correcting IF 2. ! A total of 45 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.00* KP 0.94 ! LA 0.95 MK 0.96 NL 1.67 OV 1.07 ! PT 0.97 SC 1.05 ! ! ! Correcting IF 3. ! A total of 27 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.00* KP 0.98 ! LA 1.02 MK 1.04 NL 1.64 OV 0.92 ! PT 0.94 SC 0.97 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.00* KP 0.82 ! LA 0.59 MK 1.05 NL 1.00* OV 1.00* ! PT 0.95 SC 1.00* ! ! ! Fit before self-cal, rms=0.143835Jy sigma=0.000686 ! Fit after self-cal, rms=0.161091Jy sigma=0.000663 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.067 mas, bmaj=8.582 mas, bpa=-10.1 degrees ! Estimated noise=1680.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000466991 Jy ! Component: 100 - total flux cleaned = 0.000393992 Jy ! Component: 150 - total flux cleaned = 0.000391775 Jy ! Component: 200 - total flux cleaned = 0.000393292 Jy ! Total flux subtracted in 200 components = 0.000393292 Jy ! Clean residual min=-0.004623 max=0.004284 Jy/beam ! Clean residual mean=0.000020 rms=0.001307 Jy/beam ! Combined flux in latest and established models = 0.226178 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 35 components and 0.226178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161039Jy sigma=0.000663 ! Fit after self-cal, rms=0.161517Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161517Jy sigma=0.000662 ! Fit after self-cal, rms=0.163301Jy sigma=0.000661 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.068 mas, bmaj=8.58 mas, bpa=-10.12 degrees ! Estimated noise=1683.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000294257 Jy ! Component: 100 - total flux cleaned = 0.00018789 Jy ! Component: 150 - total flux cleaned = 0.000237538 Jy ! Component: 200 - total flux cleaned = 0.000234181 Jy ! Total flux subtracted in 200 components = 0.000234181 Jy ! Clean residual min=-0.004558 max=0.004120 Jy/beam ! Clean residual mean=0.000026 rms=0.001201 Jy/beam ! Combined flux in latest and established models = 0.226412 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 39 components and 0.226412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163263Jy sigma=0.000661 ! Fit after self-cal, rms=0.163283Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.11034e-05 Jy ! Component: 100 - total flux cleaned = -4.61021e-05 Jy ! Component: 150 - total flux cleaned = -4.63949e-05 Jy ! Component: 200 - total flux cleaned = -4.51103e-05 Jy ! Total flux subtracted in 200 components = -4.51103e-05 Jy ! Clean residual min=-0.004472 max=0.003999 Jy/beam ! Clean residual mean=0.000026 rms=0.001188 Jy/beam ! Combined flux in latest and established models = 0.226367 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 39 components and 0.226367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163258Jy sigma=0.000661 ! Fit after self-cal, rms=0.163259Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163259Jy sigma=0.000661 ! Fit after self-cal, rms=0.164003Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.063 mas, bmaj=8.567 mas, bpa=-10.18 degrees ! Estimated noise=1684.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000706001 Jy ! Component: 100 - total flux cleaned = 0.000705007 Jy ! Component: 150 - total flux cleaned = 0.000672612 Jy ! Component: 200 - total flux cleaned = 0.000671461 Jy ! Total flux subtracted in 200 components = 0.000671461 Jy ! Clean residual min=-0.004470 max=0.003929 Jy/beam ! Clean residual mean=0.000033 rms=0.001153 Jy/beam ! Combined flux in latest and established models = 0.227038 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 40 components and 0.227038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163981Jy sigma=0.000660 ! Fit after self-cal, rms=0.163999Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.84294e-05 Jy ! Component: 100 - total flux cleaned = -4.79879e-05 Jy ! Component: 150 - total flux cleaned = -7.57419e-05 Jy ! Component: 200 - total flux cleaned = -7.58617e-05 Jy ! Total flux subtracted in 200 components = -7.58617e-05 Jy ! Clean residual min=-0.004428 max=0.003884 Jy/beam ! Clean residual mean=0.000033 rms=0.001148 Jy/beam ! Combined flux in latest and established models = 0.226962 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 40 components and 0.226962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163984Jy sigma=0.000660 ! Fit after self-cal, rms=0.163985Jy sigma=0.000660 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163985Jy sigma=0.000660 ! Fit after self-cal, rms=0.164148Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.971 mas, bmaj=31.98 mas, bpa=-2.747 degrees ! Estimated noise=2101.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000360753 Jy ! Component: 100 - total flux cleaned = 0.000360279 Jy ! Component: 150 - total flux cleaned = 0.000360256 Jy ! Component: 200 - total flux cleaned = 0.000360333 Jy ! Total flux subtracted in 200 components = 0.000360333 Jy ! Clean residual min=-0.004720 max=0.004587 Jy/beam ! Clean residual mean=0.000059 rms=0.001529 Jy/beam ! Combined flux in latest and established models = 0.227323 Jy selfcal ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 41 components and 0.227323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164147Jy sigma=0.000660 ! Fit after self-cal, rms=0.164147Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.22814e-05 Jy ! Component: 100 - total flux cleaned = -1.21518e-05 Jy ! Component: 150 - total flux cleaned = -1.77155e-05 Jy ! Component: 200 - total flux cleaned = -1.79511e-05 Jy ! Total flux subtracted in 200 components = -1.79511e-05 Jy ! Clean residual min=-0.004722 max=0.004611 Jy/beam ! Clean residual mean=0.000059 rms=0.001530 Jy/beam ! Combined flux in latest and established models = 0.227305 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 43 components and 0.227305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164147Jy sigma=0.000660 ! Fit after self-cal, rms=0.164146Jy sigma=0.000660 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.054 mas, bmaj=8.551 mas, bpa=-10.26 degrees ! Estimated noise=1684.63 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.054 x 8.551 at -10.26 degrees (North through East) ! Clean map min=-0.0043354 max=0.16624 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.339 mas, bmaj=7.223 mas, bpa=-9.375 degrees ! Estimated noise=3100.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.13725 Jy ! Component: 100 - total flux cleaned = 0.185798 Jy ! Component: 150 - total flux cleaned = 0.206911 Jy ! Component: 200 - total flux cleaned = 0.217334 Jy ! Total flux subtracted in 200 components = 0.217334 Jy ! Clean residual min=-0.006776 max=0.006916 Jy/beam ! Clean residual mean=-0.000035 rms=0.001805 Jy/beam ! Combined flux in latest and established models = 0.217334 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.217334 Jy ! Inverting map and beam ! Estimated beam: bmin=3.054 mas, bmaj=8.551 mas, bpa=-10.26 degrees ! Estimated noise=1684.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, 7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0060309 Jy ! Component: 100 - total flux cleaned = 0.00903262 Jy ! Component: 150 - total flux cleaned = 0.0106644 Jy ! Component: 200 - total flux cleaned = 0.0109259 Jy ! Total flux subtracted in 200 components = 0.0109259 Jy ! Clean residual min=-0.004125 max=0.003640 Jy/beam ! Clean residual mean=0.000039 rms=0.001091 Jy/beam ! Combined flux in latest and established models = 0.22826 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 38 components and 0.22826 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.971 mas, bmaj=31.98 mas, bpa=-2.747 degrees ! Estimated noise=2101.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000541121 Jy ! Component: 100 - total flux cleaned = 0.000538368 Jy ! Component: 150 - total flux cleaned = 0.000570514 Jy ! Component: 200 - total flux cleaned = 0.000617222 Jy ! Total flux subtracted in 200 components = 0.000617222 Jy ! Clean residual min=-0.004848 max=0.003416 Jy/beam ! Clean residual mean=0.000076 rms=0.001429 Jy/beam ! Combined flux in latest and established models = 0.228877 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.41088e-05 Jy ! Component: 100 - total flux cleaned = 7.22564e-05 Jy ! Component: 150 - total flux cleaned = 0.00011294 Jy ! Component: 200 - total flux cleaned = 0.000151725 Jy ! Total flux subtracted in 200 components = 0.000151725 Jy ! Clean residual min=-0.004847 max=0.003416 Jy/beam ! Clean residual mean=0.000078 rms=0.001424 Jy/beam ! Combined flux in latest and established models = 0.229029 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 48 components and 0.229029 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.054 mas, bmaj=8.551 mas, bpa=-10.26 degrees ! Estimated noise=1684.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.94305e-05 Jy ! Component: 100 - total flux cleaned = 6.18621e-05 Jy ! Component: 150 - total flux cleaned = 0.000118067 Jy ! Component: 200 - total flux cleaned = 0.00011899 Jy ! Total flux subtracted in 200 components = 0.00011899 Jy ! Clean residual min=-0.004028 max=0.003554 Jy/beam ! Clean residual mean=0.000043 rms=0.001070 Jy/beam ! Combined flux in latest and established models = 0.229148 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 61 components and 0.229148 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164004Jy sigma=0.000660 ! Fit after self-cal, rms=0.163965Jy sigma=0.000660 wmodel J1250-4432_S_2017_05_31_pus_map.mod ! Writing 61 model components to file: J1250-4432_S_2017_05_31_pus_map.mod wobs J1250-4432_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J1250-4432_S_2017_05_31_pus_uvs.fits wwins J1250-4432_S_2017_05_31_pus_map.win ! wwins: Wrote 2 windows to J1250-4432_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000980507 Jy ! Component: 100 - total flux cleaned = -0.00111024 Jy ! Component: 150 - total flux cleaned = -0.00146234 Jy ! Component: 200 - total flux cleaned = -0.00178791 Jy ! Component: 250 - total flux cleaned = -0.00188801 Jy ! Component: 300 - total flux cleaned = -0.00174603 Jy ! Component: 350 - total flux cleaned = -0.00170086 Jy ! Component: 400 - total flux cleaned = -0.00170111 Jy ! Component: 450 - total flux cleaned = -0.0017853 Jy ! Component: 500 - total flux cleaned = -0.00182602 Jy ! Component: 550 - total flux cleaned = -0.00198426 Jy ! Component: 600 - total flux cleaned = -0.00206082 Jy ! Component: 650 - total flux cleaned = -0.00206085 Jy ! Component: 700 - total flux cleaned = -0.00202473 Jy ! Component: 750 - total flux cleaned = -0.00195435 Jy ! Component: 800 - total flux cleaned = -0.00192061 Jy ! Component: 850 - total flux cleaned = -0.00211897 Jy ! Component: 900 - total flux cleaned = -0.00218363 Jy ! Component: 950 - total flux cleaned = -0.00237351 Jy ! Component: 1000 - total flux cleaned = -0.00255985 Jy ! Component: 1050 - total flux cleaned = -0.00274262 Jy ! Component: 1100 - total flux cleaned = -0.00289205 Jy ! Component: 1150 - total flux cleaned = -0.00303923 Jy ! Component: 1200 - total flux cleaned = -0.00315493 Jy ! Component: 1250 - total flux cleaned = -0.0032693 Jy ! Component: 1300 - total flux cleaned = -0.00335406 Jy ! Component: 1350 - total flux cleaned = -0.00346533 Jy ! Component: 1400 - total flux cleaned = -0.00352011 Jy ! Component: 1450 - total flux cleaned = -0.00360128 Jy ! Component: 1500 - total flux cleaned = -0.00365474 Jy ! Component: 1550 - total flux cleaned = -0.00373408 Jy ! Component: 1600 - total flux cleaned = -0.00381233 Jy ! Component: 1650 - total flux cleaned = -0.00394131 Jy ! Component: 1700 - total flux cleaned = -0.00406894 Jy ! Component: 1750 - total flux cleaned = -0.00419537 Jy ! Component: 1800 - total flux cleaned = -0.00437116 Jy ! Component: 1850 - total flux cleaned = -0.00449565 Jy ! Component: 1900 - total flux cleaned = -0.00466873 Jy ! Component: 1950 - total flux cleaned = -0.00481583 Jy ! Component: 2000 - total flux cleaned = -0.00491326 Jy ! Component: 2050 - total flux cleaned = -0.0050825 Jy ! Component: 2100 - total flux cleaned = -0.00520248 Jy ! Component: 2150 - total flux cleaned = -0.00532165 Jy ! Component: 2200 - total flux cleaned = -0.00539285 Jy ! Component: 2250 - total flux cleaned = -0.00551075 Jy ! Component: 2300 - total flux cleaned = -0.00560475 Jy ! Component: 2350 - total flux cleaned = -0.00569825 Jy ! Component: 2400 - total flux cleaned = -0.00579142 Jy ! Component: 2450 - total flux cleaned = -0.00581474 Jy ! Component: 2500 - total flux cleaned = -0.00593035 Jy ! Component: 2550 - total flux cleaned = -0.00597645 Jy ! Component: 2600 - total flux cleaned = -0.00593019 Jy ! Component: 2650 - total flux cleaned = -0.00593038 Jy ! Component: 2700 - total flux cleaned = -0.00595342 Jy ! Component: 2750 - total flux cleaned = -0.00597634 Jy ! Component: 2800 - total flux cleaned = -0.00599915 Jy ! Component: 2850 - total flux cleaned = -0.00599922 Jy ! Component: 2900 - total flux cleaned = -0.00609108 Jy ! Component: 2950 - total flux cleaned = -0.0061371 Jy ! Component: 3000 - total flux cleaned = -0.00616016 Jy ! Component: 3050 - total flux cleaned = -0.00625233 Jy ! Component: 3100 - total flux cleaned = -0.00634482 Jy ! Component: 3150 - total flux cleaned = -0.00639121 Jy ! Component: 3200 - total flux cleaned = -0.00643768 Jy ! Component: 3250 - total flux cleaned = -0.00650744 Jy ! Component: 3300 - total flux cleaned = -0.00653101 Jy ! Component: 3350 - total flux cleaned = -0.00653117 Jy ! Component: 3400 - total flux cleaned = -0.00660149 Jy ! Component: 3450 - total flux cleaned = -0.00667223 Jy ! Component: 3500 - total flux cleaned = -0.00669604 Jy ! Component: 3550 - total flux cleaned = -0.00674369 Jy ! Component: 3600 - total flux cleaned = -0.00676757 Jy ! Component: 3650 - total flux cleaned = -0.00686379 Jy ! Component: 3700 - total flux cleaned = -0.0068396 Jy ! Component: 3750 - total flux cleaned = -0.00698531 Jy ! Component: 3800 - total flux cleaned = -0.00698559 Jy ! Component: 3850 - total flux cleaned = -0.00703461 Jy ! Component: 3900 - total flux cleaned = -0.00715861 Jy ! Component: 3950 - total flux cleaned = -0.00720865 Jy ! Component: 4000 - total flux cleaned = -0.00720869 Jy ! Component: 4050 - total flux cleaned = -0.00728422 Jy ! Total flux subtracted in 4096 components = -0.00738589 Jy ! Clean residual min=-0.001524 max=0.001454 Jy/beam ! Clean residual mean=-0.000007 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.221762 Jy keep ! Adding 196 model components to the UV plane model. ! The established model now contains 257 components and 0.221762 Jy ![Exited script file: muppet] wmap "J1250-4432_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.054 x 8.551 at -10.26 degrees (North through East) ! Clean map min=-0.0047038 max=0.17874 Jy/beam ! Writing clean map to FITS file: J1250-4432_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.178735 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000416504 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.699086 0.699086 1.39817 2.79635 5.59269 11.1854 22.3708 44.7415 89.483 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.178 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.054 x 8.551 at -10.26 degrees (North through East) ! Clean map min=-0.0047038 max=0.17874 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1250-4432_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:48:47 2019