! Started logfile: J1246-2547_S_2017_09_26_pus_uvs.log on Sat May 11 13:01:33 2019 obs J1246-2547_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J1246-2547_S_2017_09_26_pus_uva.fits ! AN table 1: 26 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.529915 visibilities/baseline/integration-bin. ! Found source: J1246-2547 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 1984 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1246-2547_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 168 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.699885Jy sigma=0.004688 ! Fit after self-cal, rms=0.693629Jy sigma=0.004648 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.793 mas, bmaj=12.61 mas, bpa=-19.77 degrees ! Estimated noise=3609.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.239572 Jy ! Component: 100 - total flux cleaned = 0.303342 Jy ! Total flux subtracted in 100 components = 0.303342 Jy ! Clean residual min=-0.015000 max=0.026850 Jy/beam ! Clean residual mean=0.000258 rms=0.005082 Jy/beam ! Combined flux in latest and established models = 0.303342 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.303342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117627Jy sigma=0.000780 ! Fit after self-cal, rms=0.117526Jy sigma=0.000779 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.359 mas, bmaj=14.37 mas, bpa=-18.12 degrees ! Estimated noise=2682.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0365182 Jy ! Component: 100 - total flux cleaned = 0.0554868 Jy ! Component: 150 - total flux cleaned = 0.0668564 Jy ! Component: 200 - total flux cleaned = 0.0739371 Jy ! Total flux subtracted in 200 components = 0.0739371 Jy ! Clean residual min=-0.010289 max=0.016525 Jy/beam ! Clean residual mean=0.000165 rms=0.003599 Jy/beam ! Combined flux in latest and established models = 0.377279 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 57 components and 0.377279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106733Jy sigma=0.000695 ! Fit after self-cal, rms=0.106668Jy sigma=0.000695 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.01 KP 1.02 ! LA 0.99 MK 0.98 NL 1.04 OV 1.01 ! PT 0.93 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 0.98 KP 1.01 ! LA 0.91 MK 0.96 NL 1.17 OV 1.05 ! PT 0.94 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.05 KP 0.99 ! LA 0.96 MK 1.01 NL 1.13 OV 0.95 ! PT 0.92 ! ! ! Correcting IF 4. ! A total of 66 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.106668Jy sigma=0.000695 ! Fit after self-cal, rms=0.105371Jy sigma=0.000680 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.461 mas, bmaj=14.56 mas, bpa=-18.24 degrees ! Estimated noise=2712.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00359027 Jy ! Component: 100 - total flux cleaned = -0.00443853 Jy ! Component: 150 - total flux cleaned = -0.00482921 Jy ! Component: 200 - total flux cleaned = -0.00473106 Jy ! Total flux subtracted in 200 components = -0.00473106 Jy ! Clean residual min=-0.008031 max=0.010142 Jy/beam ! Clean residual mean=0.000044 rms=0.002451 Jy/beam ! Combined flux in latest and established models = 0.372548 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 70 components and 0.372548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104816Jy sigma=0.000676 ! Fit after self-cal, rms=0.104887Jy sigma=0.000676 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104887Jy sigma=0.000676 ! Fit after self-cal, rms=0.104288Jy sigma=0.000668 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.475 mas, bmaj=14.6 mas, bpa=-18.29 degrees ! Estimated noise=2705.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000556309 Jy ! Component: 100 - total flux cleaned = 0.000267196 Jy ! Component: 150 - total flux cleaned = 0.000169359 Jy ! Component: 200 - total flux cleaned = 7.91649e-05 Jy ! Total flux subtracted in 200 components = 7.91649e-05 Jy ! Clean residual min=-0.006712 max=0.009077 Jy/beam ! Clean residual mean=0.000036 rms=0.001899 Jy/beam ! Combined flux in latest and established models = 0.372627 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 79 components and 0.372627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104222Jy sigma=0.000667 ! Fit after self-cal, rms=0.104259Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (49.5, -54). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00770571 Jy ! Component: 100 - total flux cleaned = 0.0102211 Jy ! Component: 150 - total flux cleaned = 0.0104174 Jy ! Component: 200 - total flux cleaned = 0.0106603 Jy ! Total flux subtracted in 200 components = 0.0106603 Jy ! Clean residual min=-0.006037 max=0.006871 Jy/beam ! Clean residual mean=0.000001 rms=0.001557 Jy/beam ! Combined flux in latest and established models = 0.383287 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 112 components and 0.383287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103655Jy sigma=0.000663 ! Fit after self-cal, rms=0.103622Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103622Jy sigma=0.000663 ! Fit after self-cal, rms=0.103196Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.475 mas, bmaj=14.6 mas, bpa=-18.3 degrees ! Estimated noise=2695.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012131 Jy ! Component: 100 - total flux cleaned = 0.00135821 Jy ! Component: 150 - total flux cleaned = 0.00129458 Jy ! Component: 200 - total flux cleaned = 0.00134925 Jy ! Total flux subtracted in 200 components = 0.00134925 Jy ! Clean residual min=-0.005825 max=0.006299 Jy/beam ! Clean residual mean=-0.000009 rms=0.001465 Jy/beam ! Combined flux in latest and established models = 0.384637 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 130 components and 0.384637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103098Jy sigma=0.000663 ! Fit after self-cal, rms=0.103097Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (60.5, 101). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00539081 Jy ! Component: 100 - total flux cleaned = 0.00766179 Jy ! Component: 150 - total flux cleaned = 0.0085856 Jy ! Component: 200 - total flux cleaned = 0.00937552 Jy ! Total flux subtracted in 200 components = 0.00937552 Jy ! Clean residual min=-0.004919 max=0.005341 Jy/beam ! Clean residual mean=0.000011 rms=0.001261 Jy/beam ! Combined flux in latest and established models = 0.394012 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 158 components and 0.394012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102773Jy sigma=0.000661 ! Fit after self-cal, rms=0.102768Jy sigma=0.000661 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102768Jy sigma=0.000661 ! Fit after self-cal, rms=0.102489Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.577 mas, bmaj=26.25 mas, bpa=-8.624 degrees ! Estimated noise=3241.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00040229 Jy ! Component: 100 - total flux cleaned = 0.000305602 Jy ! Component: 150 - total flux cleaned = 0.000166494 Jy ! Component: 200 - total flux cleaned = -7.34691e-06 Jy ! Total flux subtracted in 200 components = -7.34691e-06 Jy ! Clean residual min=-0.004851 max=0.005020 Jy/beam ! Clean residual mean=0.000013 rms=0.001556 Jy/beam ! Combined flux in latest and established models = 0.394005 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 182 components and 0.394005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102456Jy sigma=0.000660 ! Fit after self-cal, rms=0.102456Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000188633 Jy ! Component: 100 - total flux cleaned = -0.00031519 Jy ! Component: 150 - total flux cleaned = -0.000517482 Jy ! Component: 200 - total flux cleaned = -0.000673107 Jy ! Total flux subtracted in 200 components = -0.000673107 Jy ! Clean residual min=-0.004752 max=0.004878 Jy/beam ! Clean residual mean=0.000015 rms=0.001519 Jy/beam ! Combined flux in latest and established models = 0.393332 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 196 components and 0.393332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102440Jy sigma=0.000660 ! Fit after self-cal, rms=0.102439Jy sigma=0.000660 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.474 mas, bmaj=14.61 mas, bpa=-18.26 degrees ! Estimated noise=2687.47 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.474 x 14.61 at -18.26 degrees (North through East) ! Clean map min=-0.006781 max=0.30968 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.886 mas, bmaj=12.78 mas, bpa=-20.32 degrees ! Estimated noise=3602.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.237212 Jy ! Component: 100 - total flux cleaned = 0.29995 Jy ! Component: 150 - total flux cleaned = 0.327697 Jy ! Component: 200 - total flux cleaned = 0.342734 Jy ! Total flux subtracted in 200 components = 0.342734 Jy ! Clean residual min=-0.008137 max=0.009229 Jy/beam ! Clean residual mean=0.000090 rms=0.002361 Jy/beam ! Combined flux in latest and established models = 0.342734 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.342734 Jy ! Inverting map and beam ! Estimated beam: bmin=3.474 mas, bmaj=14.61 mas, bpa=-18.26 degrees ! Estimated noise=2687.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0137594 Jy ! Component: 100 - total flux cleaned = 0.0229825 Jy ! Component: 150 - total flux cleaned = 0.0298637 Jy ! Component: 200 - total flux cleaned = 0.0351777 Jy ! Total flux subtracted in 200 components = 0.0351777 Jy ! Clean residual min=-0.005968 max=0.006499 Jy/beam ! Clean residual mean=0.000036 rms=0.001607 Jy/beam ! Combined flux in latest and established models = 0.377912 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 78 components and 0.377912 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.577 mas, bmaj=26.25 mas, bpa=-8.624 degrees ! Estimated noise=3241.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00589644 Jy ! Component: 100 - total flux cleaned = 0.00986645 Jy ! Component: 150 - total flux cleaned = 0.0129558 Jy ! Component: 200 - total flux cleaned = 0.0139693 Jy ! Total flux subtracted in 200 components = 0.0139693 Jy ! Clean residual min=-0.005362 max=0.005805 Jy/beam ! Clean residual mean=0.000007 rms=0.001802 Jy/beam ! Combined flux in latest and established models = 0.391881 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000627076 Jy ! Component: 100 - total flux cleaned = 0.0011149 Jy ! Component: 150 - total flux cleaned = 0.00126486 Jy ! Component: 200 - total flux cleaned = 0.00133417 Jy ! Total flux subtracted in 200 components = 0.00133417 Jy ! Clean residual min=-0.005017 max=0.005494 Jy/beam ! Clean residual mean=0.000006 rms=0.001706 Jy/beam ! Combined flux in latest and established models = 0.393215 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 132 components and 0.393215 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.474 mas, bmaj=14.61 mas, bpa=-18.26 degrees ! Estimated noise=2687.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000641663 Jy ! Component: 100 - total flux cleaned = 0.0010127 Jy ! Component: 150 - total flux cleaned = 0.00142798 Jy ! Component: 200 - total flux cleaned = 0.0016578 Jy ! Total flux subtracted in 200 components = 0.0016578 Jy ! Clean residual min=-0.005242 max=0.005565 Jy/beam ! Clean residual mean=0.000002 rms=0.001300 Jy/beam ! Combined flux in latest and established models = 0.394873 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 157 components and 0.394873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102605Jy sigma=0.000661 ! Fit after self-cal, rms=0.102569Jy sigma=0.000661 wmodel J1246-2547_S_2017_09_26_pus_map.mod ! Writing 157 model components to file: J1246-2547_S_2017_09_26_pus_map.mod wobs J1246-2547_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J1246-2547_S_2017_09_26_pus_uvs.fits wwins J1246-2547_S_2017_09_26_pus_map.win ! wwins: Wrote 3 windows to J1246-2547_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122197 Jy ! Component: 100 - total flux cleaned = 0.00230915 Jy ! Component: 150 - total flux cleaned = 0.00337737 Jy ! Component: 200 - total flux cleaned = 0.0038736 Jy ! Component: 250 - total flux cleaned = 0.00413803 Jy ! Component: 300 - total flux cleaned = 0.00420263 Jy ! Component: 350 - total flux cleaned = 0.00402394 Jy ! Component: 400 - total flux cleaned = 0.00385433 Jy ! Component: 450 - total flux cleaned = 0.00379953 Jy ! Component: 500 - total flux cleaned = 0.00379925 Jy ! Component: 550 - total flux cleaned = 0.00379915 Jy ! Component: 600 - total flux cleaned = 0.00375012 Jy ! Component: 650 - total flux cleaned = 0.00384561 Jy ! Component: 700 - total flux cleaned = 0.00393822 Jy ! Component: 750 - total flux cleaned = 0.00402829 Jy ! Component: 800 - total flux cleaned = 0.00411587 Jy ! Component: 850 - total flux cleaned = 0.00428818 Jy ! Component: 900 - total flux cleaned = 0.00445633 Jy ! Component: 950 - total flux cleaned = 0.00441489 Jy ! Component: 1000 - total flux cleaned = 0.00449562 Jy ! Component: 1050 - total flux cleaned = 0.00445632 Jy ! Component: 1100 - total flux cleaned = 0.00461214 Jy ! Component: 1150 - total flux cleaned = 0.0046882 Jy ! Component: 1200 - total flux cleaned = 0.00476351 Jy ! Component: 1250 - total flux cleaned = 0.00487353 Jy ! Component: 1300 - total flux cleaned = 0.00483698 Jy ! Component: 1350 - total flux cleaned = 0.00487289 Jy ! Component: 1400 - total flux cleaned = 0.00487306 Jy ! Component: 1450 - total flux cleaned = 0.00501185 Jy ! Component: 1500 - total flux cleaned = 0.00511416 Jy ! Component: 1550 - total flux cleaned = 0.0051816 Jy ! Component: 1600 - total flux cleaned = 0.00521495 Jy ! Component: 1650 - total flux cleaned = 0.00534563 Jy ! Component: 1700 - total flux cleaned = 0.00544226 Jy ! Component: 1750 - total flux cleaned = 0.00544213 Jy ! Component: 1800 - total flux cleaned = 0.00556841 Jy ! Component: 1850 - total flux cleaned = 0.00566164 Jy ! Component: 1900 - total flux cleaned = 0.00572331 Jy ! Component: 1950 - total flux cleaned = 0.00581428 Jy ! Component: 2000 - total flux cleaned = 0.00587383 Jy ! Component: 2050 - total flux cleaned = 0.00581418 Jy ! Component: 2100 - total flux cleaned = 0.00578478 Jy ! Component: 2150 - total flux cleaned = 0.00578495 Jy ! Component: 2200 - total flux cleaned = 0.00584274 Jy ! Component: 2250 - total flux cleaned = 0.00584273 Jy ! Component: 2300 - total flux cleaned = 0.00595625 Jy ! Component: 2350 - total flux cleaned = 0.005956 Jy ! Component: 2400 - total flux cleaned = 0.00598399 Jy ! Component: 2450 - total flux cleaned = 0.0059841 Jy ! Component: 2500 - total flux cleaned = 0.00601186 Jy ! Component: 2550 - total flux cleaned = 0.00601199 Jy ! Component: 2600 - total flux cleaned = 0.00603931 Jy ! Component: 2650 - total flux cleaned = 0.00603921 Jy ! Component: 2700 - total flux cleaned = 0.00601224 Jy ! Component: 2750 - total flux cleaned = 0.00593127 Jy ! Component: 2800 - total flux cleaned = 0.00598485 Jy ! Component: 2850 - total flux cleaned = 0.00595801 Jy ! Component: 2900 - total flux cleaned = 0.00590466 Jy ! Component: 2950 - total flux cleaned = 0.00598447 Jy ! Component: 3000 - total flux cleaned = 0.00593133 Jy ! Component: 3050 - total flux cleaned = 0.00603702 Jy ! Component: 3100 - total flux cleaned = 0.00601049 Jy ! Component: 3150 - total flux cleaned = 0.00606313 Jy ! Component: 3200 - total flux cleaned = 0.00601065 Jy ! Component: 3250 - total flux cleaned = 0.00603714 Jy ! Component: 3300 - total flux cleaned = 0.00611578 Jy ! Component: 3350 - total flux cleaned = 0.00611552 Jy ! Component: 3400 - total flux cleaned = 0.00616768 Jy ! Component: 3450 - total flux cleaned = 0.00611556 Jy ! Component: 3500 - total flux cleaned = 0.0061415 Jy ! Component: 3550 - total flux cleaned = 0.00619338 Jy ! Component: 3600 - total flux cleaned = 0.00614138 Jy ! Component: 3650 - total flux cleaned = 0.00619324 Jy ! Component: 3700 - total flux cleaned = 0.0061151 Jy ! Component: 3750 - total flux cleaned = 0.0061152 Jy ! Component: 3800 - total flux cleaned = 0.00606323 Jy ! Component: 3850 - total flux cleaned = 0.00603712 Jy ! Component: 3900 - total flux cleaned = 0.00595921 Jy ! Component: 3950 - total flux cleaned = 0.0059073 Jy ! Component: 4000 - total flux cleaned = 0.00582933 Jy ! Component: 4050 - total flux cleaned = 0.00585524 Jy ! Total flux subtracted in 4096 components = 0.00575109 Jy ! Clean residual min=-0.001541 max=0.001447 Jy/beam ! Clean residual mean=0.000013 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.400624 Jy keep ! Adding 272 model components to the UV plane model. ! The established model now contains 429 components and 0.400624 Jy ![Exited script file: muppet] wmap "J1246-2547_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.474 x 14.61 at -18.26 degrees (North through East) ! Clean map min=-0.0037309 max=0.30789 Jy/beam ! Writing clean map to FITS file: J1246-2547_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.307894 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000460053 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.448257 0.448257 0.896514 1.79303 3.58606 7.17212 14.3442 28.6885 57.3769 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.307 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.474 x 14.61 at -18.26 degrees (North through East) ! Clean map min=-0.0037309 max=0.30789 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1246-2547_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:01:38 2019