! Started logfile: J1246-2547_S_2017_07_09_pus_uvs.log on Wed May 8 14:48:38 2019 obs J1246-2547_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J1246-2547_S_2017_07_09_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.567521 visibilities/baseline/integration-bin. ! Found source: J1246-2547 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 1328 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1246-2547_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.687727Jy sigma=0.004740 ! Fit after self-cal, rms=0.659966Jy sigma=0.004543 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.431 mas, bmaj=12.59 mas, bpa=0.8984 degrees ! Estimated noise=4312.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.262603 Jy ! Component: 100 - total flux cleaned = 0.328254 Jy ! Total flux subtracted in 100 components = 0.328254 Jy ! Clean residual min=-0.019790 max=0.030700 Jy/beam ! Clean residual mean=0.000462 rms=0.007093 Jy/beam ! Combined flux in latest and established models = 0.328254 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.328254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120086Jy sigma=0.000810 ! Fit after self-cal, rms=0.120033Jy sigma=0.000809 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.997 mas, bmaj=14.13 mas, bpa=0.9432 degrees ! Estimated noise=3221.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0442565 Jy ! Component: 100 - total flux cleaned = 0.06698 Jy ! Component: 150 - total flux cleaned = 0.0791868 Jy ! Component: 200 - total flux cleaned = 0.085817 Jy ! Total flux subtracted in 200 components = 0.085817 Jy ! Clean residual min=-0.009131 max=0.014141 Jy/beam ! Clean residual mean=0.000188 rms=0.003416 Jy/beam ! Combined flux in latest and established models = 0.414071 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 65 components and 0.414071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104474Jy sigma=0.000687 ! Fit after self-cal, rms=0.104379Jy sigma=0.000687 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 0.98 KP 0.98 ! LA 0.96 MK 1.00* NL 0.90 OV 1.04 ! PT 1.02 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.12 KP 0.96 ! LA 0.98 MK 1.00* NL 1.09 OV 1.08 ! PT 0.97 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.11 KP 0.93 ! LA 0.97 MK 1.00* NL 1.02 OV 0.99 ! PT 0.94 SC 1.04 ! ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.104379Jy sigma=0.000687 ! Fit after self-cal, rms=0.103005Jy sigma=0.000668 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.025 mas, bmaj=14.37 mas, bpa=1.772 degrees ! Estimated noise=3268.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00283723 Jy ! Component: 100 - total flux cleaned = -0.00301071 Jy ! Component: 150 - total flux cleaned = -0.00301153 Jy ! Component: 200 - total flux cleaned = -0.00301075 Jy ! Total flux subtracted in 200 components = -0.00301075 Jy ! Clean residual min=-0.008284 max=0.014349 Jy/beam ! Clean residual mean=0.000129 rms=0.002832 Jy/beam ! Combined flux in latest and established models = 0.41106 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 88 components and 0.41106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102896Jy sigma=0.000667 ! Fit after self-cal, rms=0.102948Jy sigma=0.000667 ! Inverting map ! Added new window around map position (-42.5, 79). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115583 Jy ! Component: 100 - total flux cleaned = 0.0157349 Jy ! Component: 150 - total flux cleaned = 0.0167836 Jy ! Component: 200 - total flux cleaned = 0.0172776 Jy ! Total flux subtracted in 200 components = 0.0172776 Jy ! Clean residual min=-0.006427 max=0.007020 Jy/beam ! Clean residual mean=0.000079 rms=0.001756 Jy/beam ! Combined flux in latest and established models = 0.428338 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 123 components and 0.428338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101705Jy sigma=0.000658 ! Fit after self-cal, rms=0.101647Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101647Jy sigma=0.000658 ! Fit after self-cal, rms=0.101405Jy sigma=0.000658 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.025 mas, bmaj=14.4 mas, bpa=1.819 degrees ! Estimated noise=3256.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000908878 Jy ! Component: 100 - total flux cleaned = 0.00106288 Jy ! Component: 150 - total flux cleaned = 0.00106274 Jy ! Component: 200 - total flux cleaned = 0.00117955 Jy ! Total flux subtracted in 200 components = 0.00117955 Jy ! Clean residual min=-0.006242 max=0.007254 Jy/beam ! Clean residual mean=0.000073 rms=0.001630 Jy/beam ! Combined flux in latest and established models = 0.429517 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 153 components and 0.429517 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101295Jy sigma=0.000657 ! Fit after self-cal, rms=0.101295Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2, -115.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0057581 Jy ! Component: 100 - total flux cleaned = 0.00652459 Jy ! Component: 150 - total flux cleaned = 0.00700846 Jy ! Component: 200 - total flux cleaned = 0.00744124 Jy ! Total flux subtracted in 200 components = 0.00744124 Jy ! Clean residual min=-0.005303 max=0.004851 Jy/beam ! Clean residual mean=0.000049 rms=0.001376 Jy/beam ! Combined flux in latest and established models = 0.436958 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 174 components and 0.436958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100923Jy sigma=0.000655 ! Fit after self-cal, rms=0.100920Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100920Jy sigma=0.000655 ! Fit after self-cal, rms=0.100751Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.026 mas, bmaj=14.42 mas, bpa=1.837 degrees ! Estimated noise=3247.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000848105 Jy ! Component: 100 - total flux cleaned = 0.000911352 Jy ! Component: 150 - total flux cleaned = 0.000729803 Jy ! Component: 200 - total flux cleaned = 0.000615097 Jy ! Total flux subtracted in 200 components = 0.000615097 Jy ! Clean residual min=-0.005051 max=0.004715 Jy/beam ! Clean residual mean=0.000034 rms=0.001295 Jy/beam ! Combined flux in latest and established models = 0.437574 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 191 components and 0.437574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100666Jy sigma=0.000654 ! Fit after self-cal, rms=0.100668Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00017777 Jy ! Component: 100 - total flux cleaned = 0.000124465 Jy ! Component: 150 - total flux cleaned = 1.96034e-05 Jy ! Component: 200 - total flux cleaned = -2.96616e-05 Jy ! Total flux subtracted in 200 components = -2.96616e-05 Jy ! Clean residual min=-0.004906 max=0.004665 Jy/beam ! Clean residual mean=0.000035 rms=0.001264 Jy/beam ! Combined flux in latest and established models = 0.437544 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 196 components and 0.437544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100615Jy sigma=0.000654 ! Fit after self-cal, rms=0.100613Jy sigma=0.000654 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100613Jy sigma=0.000654 ! Fit after self-cal, rms=0.100557Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.87 mas, bmaj=20.03 mas, bpa=-8.086 degrees ! Estimated noise=3798.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.15789e-05 Jy ! Component: 100 - total flux cleaned = 8.52244e-05 Jy ! Component: 150 - total flux cleaned = 0.000219613 Jy ! Component: 200 - total flux cleaned = 0.000424384 Jy ! Total flux subtracted in 200 components = 0.000424384 Jy ! Clean residual min=-0.004035 max=0.004717 Jy/beam ! Clean residual mean=0.000051 rms=0.001332 Jy/beam ! Combined flux in latest and established models = 0.437968 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 209 components and 0.437968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100531Jy sigma=0.000653 ! Fit after self-cal, rms=0.100531Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.41327e-05 Jy ! Component: 100 - total flux cleaned = 0.000101182 Jy ! Component: 150 - total flux cleaned = 0.000239049 Jy ! Component: 200 - total flux cleaned = 0.00033666 Jy ! Total flux subtracted in 200 components = 0.00033666 Jy ! Clean residual min=-0.003978 max=0.004600 Jy/beam ! Clean residual mean=0.000051 rms=0.001304 Jy/beam ! Combined flux in latest and established models = 0.438305 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 211 components and 0.438305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100510Jy sigma=0.000653 ! Fit after self-cal, rms=0.100510Jy sigma=0.000653 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.026 mas, bmaj=14.42 mas, bpa=1.842 degrees ! Estimated noise=3243.13 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.026 x 14.42 at 1.842 degrees (North through East) ! Clean map min=-0.0046055 max=0.34521 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.462 mas, bmaj=12.79 mas, bpa=1.689 degrees ! Estimated noise=4360.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.261414 Jy ! Component: 100 - total flux cleaned = 0.3262 Jy ! Component: 150 - total flux cleaned = 0.356404 Jy ! Component: 200 - total flux cleaned = 0.376052 Jy ! Total flux subtracted in 200 components = 0.376052 Jy ! Clean residual min=-0.012754 max=0.016119 Jy/beam ! Clean residual mean=0.000230 rms=0.003817 Jy/beam ! Combined flux in latest and established models = 0.376052 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 47 model components to the UV plane model. ! The established model now contains 47 components and 0.376052 Jy ! Inverting map and beam ! Estimated beam: bmin=4.026 mas, bmaj=14.42 mas, bpa=1.842 degrees ! Estimated noise=3243.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0189169 Jy ! Component: 100 - total flux cleaned = 0.0297732 Jy ! Component: 150 - total flux cleaned = 0.0372934 Jy ! Component: 200 - total flux cleaned = 0.0428684 Jy ! Total flux subtracted in 200 components = 0.0428684 Jy ! Clean residual min=-0.006458 max=0.005111 Jy/beam ! Clean residual mean=0.000059 rms=0.001741 Jy/beam ! Combined flux in latest and established models = 0.41892 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 88 components and 0.41892 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.87 mas, bmaj=20.03 mas, bpa=-8.086 degrees ! Estimated noise=3798.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00563885 Jy ! Component: 100 - total flux cleaned = 0.00866717 Jy ! Component: 150 - total flux cleaned = 0.0102611 Jy ! Component: 200 - total flux cleaned = 0.0112305 Jy ! Total flux subtracted in 200 components = 0.0112305 Jy ! Clean residual min=-0.005495 max=0.004868 Jy/beam ! Clean residual mean=0.000061 rms=0.001510 Jy/beam ! Combined flux in latest and established models = 0.430151 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000585604 Jy ! Component: 100 - total flux cleaned = 0.000887051 Jy ! Component: 150 - total flux cleaned = 0.00102241 Jy ! Component: 200 - total flux cleaned = 0.00114983 Jy ! Total flux subtracted in 200 components = 0.00114983 Jy ! Clean residual min=-0.004847 max=0.004596 Jy/beam ! Clean residual mean=0.000045 rms=0.001350 Jy/beam ! Combined flux in latest and established models = 0.431301 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 155 components and 0.431301 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.026 mas, bmaj=14.42 mas, bpa=1.842 degrees ! Estimated noise=3243.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000441792 Jy ! Component: 100 - total flux cleaned = 0.000906993 Jy ! Component: 150 - total flux cleaned = 0.00107878 Jy ! Component: 200 - total flux cleaned = 0.000932167 Jy ! Total flux subtracted in 200 components = 0.000932167 Jy ! Clean residual min=-0.004490 max=0.004522 Jy/beam ! Clean residual mean=0.000028 rms=0.001225 Jy/beam ! Combined flux in latest and established models = 0.432233 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 182 components and 0.432233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100508Jy sigma=0.000653 ! Fit after self-cal, rms=0.100477Jy sigma=0.000653 wmodel J1246-2547_S_2017_07_09_pus_map.mod ! Writing 182 model components to file: J1246-2547_S_2017_07_09_pus_map.mod wobs J1246-2547_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J1246-2547_S_2017_07_09_pus_uvs.fits wwins J1246-2547_S_2017_07_09_pus_map.win ! wwins: Wrote 4 windows to J1246-2547_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000675342 Jy ! Component: 100 - total flux cleaned = -0.000673592 Jy ! Component: 150 - total flux cleaned = -0.000540633 Jy ! Component: 200 - total flux cleaned = -0.000730562 Jy ! Component: 250 - total flux cleaned = -0.000552296 Jy ! Component: 300 - total flux cleaned = -0.000265382 Jy ! Component: 350 - total flux cleaned = -4.28082e-05 Jy ! Component: 400 - total flux cleaned = 0.000170599 Jy ! Component: 450 - total flux cleaned = 0.000271514 Jy ! Component: 500 - total flux cleaned = 0.000320853 Jy ! Component: 550 - total flux cleaned = 0.000369521 Jy ! Component: 600 - total flux cleaned = 0.000463447 Jy ! Component: 650 - total flux cleaned = 0.000463469 Jy ! Component: 700 - total flux cleaned = 0.000507585 Jy ! Component: 750 - total flux cleaned = 0.000507958 Jy ! Component: 800 - total flux cleaned = 0.000593411 Jy ! Component: 850 - total flux cleaned = 0.000676338 Jy ! Component: 900 - total flux cleaned = 0.000675883 Jy ! Component: 950 - total flux cleaned = 0.000837205 Jy ! Component: 1000 - total flux cleaned = 0.00099505 Jy ! Component: 1050 - total flux cleaned = 0.00111061 Jy ! Component: 1100 - total flux cleaned = 0.00118685 Jy ! Component: 1150 - total flux cleaned = 0.00133697 Jy ! Component: 1200 - total flux cleaned = 0.00144749 Jy ! Component: 1250 - total flux cleaned = 0.00155617 Jy ! Component: 1300 - total flux cleaned = 0.00162744 Jy ! Component: 1350 - total flux cleaned = 0.00173201 Jy ! Component: 1400 - total flux cleaned = 0.00173184 Jy ! Component: 1450 - total flux cleaned = 0.00183417 Jy ! Component: 1500 - total flux cleaned = 0.00190135 Jy ! Component: 1550 - total flux cleaned = 0.00193458 Jy ! Component: 1600 - total flux cleaned = 0.00200032 Jy ! Component: 1650 - total flux cleaned = 0.00209793 Jy ! Component: 1700 - total flux cleaned = 0.00219422 Jy ! Component: 1750 - total flux cleaned = 0.00219399 Jy ! Component: 1800 - total flux cleaned = 0.00225688 Jy ! Component: 1850 - total flux cleaned = 0.00219431 Jy ! Component: 1900 - total flux cleaned = 0.00225621 Jy ! Component: 1950 - total flux cleaned = 0.0022256 Jy ! Component: 2000 - total flux cleaned = 0.00222569 Jy ! Component: 2050 - total flux cleaned = 0.00225585 Jy ! Component: 2100 - total flux cleaned = 0.00222579 Jy ! Component: 2150 - total flux cleaned = 0.00219632 Jy ! Component: 2200 - total flux cleaned = 0.00225553 Jy ! Component: 2250 - total flux cleaned = 0.00231408 Jy ! Component: 2300 - total flux cleaned = 0.00234316 Jy ! Component: 2350 - total flux cleaned = 0.00237202 Jy ! Component: 2400 - total flux cleaned = 0.00237182 Jy ! Component: 2450 - total flux cleaned = 0.0024006 Jy ! Component: 2500 - total flux cleaned = 0.00251573 Jy ! Component: 2550 - total flux cleaned = 0.0025444 Jy ! Component: 2600 - total flux cleaned = 0.00263027 Jy ! Component: 2650 - total flux cleaned = 0.00268712 Jy ! Component: 2700 - total flux cleaned = 0.00274397 Jy ! Component: 2750 - total flux cleaned = 0.00280087 Jy ! Component: 2800 - total flux cleaned = 0.00285759 Jy ! Component: 2850 - total flux cleaned = 0.00294254 Jy ! Component: 2900 - total flux cleaned = 0.0029992 Jy ! Component: 2950 - total flux cleaned = 0.00308396 Jy ! Component: 3000 - total flux cleaned = 0.00319692 Jy ! Component: 3050 - total flux cleaned = 0.00328175 Jy ! Component: 3100 - total flux cleaned = 0.00333817 Jy ! Component: 3150 - total flux cleaned = 0.00333807 Jy ! Component: 3200 - total flux cleaned = 0.00347919 Jy ! Component: 3250 - total flux cleaned = 0.00356415 Jy ! Component: 3300 - total flux cleaned = 0.0036206 Jy ! Component: 3350 - total flux cleaned = 0.00370548 Jy ! Component: 3400 - total flux cleaned = 0.00381883 Jy ! Component: 3450 - total flux cleaned = 0.00390396 Jy ! Component: 3500 - total flux cleaned = 0.00396086 Jy ! Component: 3550 - total flux cleaned = 0.00398943 Jy ! Component: 3600 - total flux cleaned = 0.00410369 Jy ! Component: 3650 - total flux cleaned = 0.00413246 Jy ! Component: 3700 - total flux cleaned = 0.0042475 Jy ! Component: 3750 - total flux cleaned = 0.00436322 Jy ! Component: 3800 - total flux cleaned = 0.00445033 Jy ! Component: 3850 - total flux cleaned = 0.00453794 Jy ! Component: 3900 - total flux cleaned = 0.00462637 Jy ! Component: 3950 - total flux cleaned = 0.00474485 Jy ! Component: 4000 - total flux cleaned = 0.00483403 Jy ! Component: 4050 - total flux cleaned = 0.004924 Jy ! Total flux subtracted in 4096 components = 0.00498428 Jy ! Clean residual min=-0.001532 max=0.001930 Jy/beam ! Clean residual mean=-0.000009 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.437217 Jy keep ! Adding 235 model components to the UV plane model. ! The established model now contains 417 components and 0.437217 Jy ![Exited script file: muppet] wmap "J1246-2547_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.026 x 14.42 at 1.842 degrees (North through East) ! Clean map min=-0.0034371 max=0.34087 Jy/beam ! Writing clean map to FITS file: J1246-2547_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.34087 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000570666 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.502243 0.502243 1.00449 2.00897 4.01794 8.03588 16.0718 32.1435 64.2871 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.34 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.026 x 14.42 at 1.842 degrees (North through East) ! Clean map min=-0.0034371 max=0.34087 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1246-2547_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:48:42 2019