! Started logfile: J1246-2547_S_2017_05_27_pus_uvs.log on Fri May 3 11:06:38 2019 obs J1246-2547_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1246-2547_S_2017_05_27_pus_uva.fits ! AN table 1: 18 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.72963 visibilities/baseline/integration-bin. ! Found source: J1246-2547 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 2364 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1246-2547_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 110 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.045754Jy sigma=0.037323 ! Fit after self-cal, rms=1.033967Jy sigma=0.036148 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.86 mas, bmaj=9.875 mas, bpa=-8.431 degrees ! Estimated noise=1685.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.15186 Jy ! Component: 100 - total flux cleaned = 0.203273 Jy ! Total flux subtracted in 100 components = 0.203273 Jy ! Clean residual min=-0.073774 max=0.072147 Jy/beam ! Clean residual mean=-0.002444 rms=0.023536 Jy/beam ! Combined flux in latest and established models = 0.203273 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.203273 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.020631Jy sigma=0.006555 ! Fit after self-cal, rms=1.020588Jy sigma=0.006555 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.543 mas, bmaj=10.93 mas, bpa=-8.27 degrees ! Estimated noise=1479.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0314885 Jy ! Component: 100 - total flux cleaned = 0.0335973 Jy ! Component: 150 - total flux cleaned = 0.0342372 Jy ! Component: 200 - total flux cleaned = 0.0347927 Jy ! Total flux subtracted in 200 components = 0.0347927 Jy ! Clean residual min=-0.072867 max=0.093944 Jy/beam ! Clean residual mean=-0.006981 rms=0.027712 Jy/beam ! Combined flux in latest and established models = 0.238066 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 12 components and 0.238066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.008559Jy sigma=0.007579 ! Fit after self-cal, rms=1.008600Jy sigma=0.007579 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.11 FD 0.61 HN 0.75 KP 0.68 ! LA 0.67 MK 0.83 NL 0.64 OV 0.73 ! PT 0.70 SC 0.80 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.68 HN 1.56 KP 0.67 ! LA 0.64 MK 0.79 NL 0.72 OV 0.76 ! PT 0.70 SC 0.88 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 7.68 FD 0.69 HN 0.80 KP 0.71 ! LA 0.67 MK 0.82 NL 0.68 OV 0.69 ! PT 0.69 SC 0.85 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.65 HN 0.82 KP 1.00* ! LA 36.15 MK 0.98 NL 1.00* OV 1.00* ! PT 0.77 SC 1.00* ! ! ! Fit before self-cal, rms=1.008600Jy sigma=0.007579 ! Fit after self-cal, rms=2.014184Jy sigma=0.000941 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.503 mas, bmaj=9.987 mas, bpa=-9.767 degrees ! Estimated noise=1516.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100282 Jy ! Component: 100 - total flux cleaned = 0.0100121 Jy ! Component: 150 - total flux cleaned = 0.00980114 Jy ! Component: 200 - total flux cleaned = 0.00980472 Jy ! Total flux subtracted in 200 components = 0.00980472 Jy ! Clean residual min=-0.014648 max=0.014257 Jy/beam ! Clean residual mean=0.000026 rms=0.003448 Jy/beam ! Combined flux in latest and established models = 0.247871 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 23 components and 0.247871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.013471Jy sigma=0.000926 ! Fit after self-cal, rms=2.013791Jy sigma=0.000906 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.013791Jy sigma=0.000906 ! Fit after self-cal, rms=0.152770Jy sigma=0.000709 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.444 mas, bmaj=9.953 mas, bpa=-9.147 degrees ! Estimated noise=1499.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.99911e-05 Jy ! Component: 100 - total flux cleaned = -0.000567636 Jy ! Component: 150 - total flux cleaned = -0.000564506 Jy ! Component: 200 - total flux cleaned = -0.000761122 Jy ! Total flux subtracted in 200 components = -0.000761122 Jy ! Clean residual min=-0.005424 max=0.008989 Jy/beam ! Clean residual mean=0.000074 rms=0.001602 Jy/beam ! Combined flux in latest and established models = 0.24711 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 33 components and 0.24711 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152577Jy sigma=0.000704 ! Fit after self-cal, rms=0.152591Jy sigma=0.000703 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (12.5, -11.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00803555 Jy ! Component: 100 - total flux cleaned = 0.0108579 Jy ! Component: 150 - total flux cleaned = 0.0114453 Jy ! Component: 200 - total flux cleaned = 0.0118625 Jy ! Total flux subtracted in 200 components = 0.0118625 Jy ! Clean residual min=-0.004799 max=0.004748 Jy/beam ! Clean residual mean=0.000020 rms=0.001204 Jy/beam ! Combined flux in latest and established models = 0.258972 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 55 components and 0.258972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152107Jy sigma=0.000690 ! Fit after self-cal, rms=0.152052Jy sigma=0.000689 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152052Jy sigma=0.000689 ! Fit after self-cal, rms=0.155755Jy sigma=0.000688 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.432 mas, bmaj=9.905 mas, bpa=-9.12 degrees ! Estimated noise=1489.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00258292 Jy ! Component: 100 - total flux cleaned = 0.00325358 Jy ! Component: 150 - total flux cleaned = 0.00333771 Jy ! Component: 200 - total flux cleaned = 0.00357354 Jy ! Total flux subtracted in 200 components = 0.00357354 Jy ! Clean residual min=-0.004158 max=0.004426 Jy/beam ! Clean residual mean=0.000032 rms=0.001088 Jy/beam ! Combined flux in latest and established models = 0.262546 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 68 components and 0.262546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155604Jy sigma=0.000685 ! Fit after self-cal, rms=0.155589Jy sigma=0.000685 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000691177 Jy ! Component: 100 - total flux cleaned = 0.000835005 Jy ! Component: 150 - total flux cleaned = 0.000902688 Jy ! Component: 200 - total flux cleaned = 0.000903127 Jy ! Total flux subtracted in 200 components = 0.000903127 Jy ! Clean residual min=-0.003936 max=0.004117 Jy/beam ! Clean residual mean=0.000028 rms=0.001056 Jy/beam ! Combined flux in latest and established models = 0.263449 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 82 components and 0.263449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155499Jy sigma=0.000684 ! Fit after self-cal, rms=0.155517Jy sigma=0.000684 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155517Jy sigma=0.000684 ! Fit after self-cal, rms=0.155998Jy sigma=0.000683 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.675 mas, bmaj=21.1 mas, bpa=-3.892 degrees ! Estimated noise=1780.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00188022 Jy ! Component: 100 - total flux cleaned = 0.00207882 Jy ! Component: 150 - total flux cleaned = 0.00219581 Jy ! Component: 200 - total flux cleaned = 0.00225099 Jy ! Total flux subtracted in 200 components = 0.00225099 Jy ! Clean residual min=-0.003820 max=0.003961 Jy/beam ! Clean residual mean=0.000059 rms=0.001208 Jy/beam ! Combined flux in latest and established models = 0.2657 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 89 components and 0.2657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155910Jy sigma=0.000682 ! Fit after self-cal, rms=0.155900Jy sigma=0.000682 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.91283e-05 Jy ! Component: 100 - total flux cleaned = 0.000136695 Jy ! Component: 150 - total flux cleaned = 0.000136694 Jy ! Component: 200 - total flux cleaned = 0.000184159 Jy ! Total flux subtracted in 200 components = 0.000184159 Jy ! Clean residual min=-0.003751 max=0.003975 Jy/beam ! Clean residual mean=0.000057 rms=0.001196 Jy/beam ! Combined flux in latest and established models = 0.265884 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 91 components and 0.265884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155854Jy sigma=0.000682 ! Fit after self-cal, rms=0.155878Jy sigma=0.000682 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.428 mas, bmaj=9.885 mas, bpa=-9.136 degrees ! Estimated noise=1485.64 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.428 x 9.885 at -9.136 degrees (North through East) ! Clean map min=-0.0039855 max=0.20201 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.843 mas, bmaj=8.864 mas, bpa=-9.145 degrees ! Estimated noise=1836.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.165381 Jy ! Component: 100 - total flux cleaned = 0.204663 Jy ! Component: 150 - total flux cleaned = 0.221837 Jy ! Component: 200 - total flux cleaned = 0.231351 Jy ! Total flux subtracted in 200 components = 0.231351 Jy ! Clean residual min=-0.005857 max=0.008776 Jy/beam ! Clean residual mean=0.000097 rms=0.001657 Jy/beam ! Combined flux in latest and established models = 0.231351 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.231351 Jy ! Inverting map and beam ! Estimated beam: bmin=3.428 mas, bmaj=9.885 mas, bpa=-9.136 degrees ! Estimated noise=1485.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5, -6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107781 Jy ! Component: 100 - total flux cleaned = 0.017441 Jy ! Component: 150 - total flux cleaned = 0.0221194 Jy ! Component: 200 - total flux cleaned = 0.0255624 Jy ! Total flux subtracted in 200 components = 0.0255624 Jy ! Clean residual min=-0.003744 max=0.004373 Jy/beam ! Clean residual mean=0.000072 rms=0.001073 Jy/beam ! Combined flux in latest and established models = 0.256914 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 59 components and 0.256914 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.675 mas, bmaj=21.1 mas, bpa=-3.892 degrees ! Estimated noise=1780.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00386854 Jy ! Component: 100 - total flux cleaned = 0.00615493 Jy ! Component: 150 - total flux cleaned = 0.00679717 Jy ! Component: 200 - total flux cleaned = 0.00691152 Jy ! Total flux subtracted in 200 components = 0.00691152 Jy ! Clean residual min=-0.003577 max=0.004411 Jy/beam ! Clean residual mean=0.000074 rms=0.001171 Jy/beam ! Combined flux in latest and established models = 0.263825 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000104248 Jy ! Component: 100 - total flux cleaned = 0.000203763 Jy ! Component: 150 - total flux cleaned = 0.000251494 Jy ! Component: 200 - total flux cleaned = 0.000253421 Jy ! Total flux subtracted in 200 components = 0.000253421 Jy ! Clean residual min=-0.003601 max=0.004359 Jy/beam ! Clean residual mean=0.000072 rms=0.001154 Jy/beam ! Combined flux in latest and established models = 0.264079 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 84 components and 0.264079 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.428 mas, bmaj=9.885 mas, bpa=-9.136 degrees ! Estimated noise=1485.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000254554 Jy ! Component: 100 - total flux cleaned = -0.000399296 Jy ! Component: 150 - total flux cleaned = -0.000527962 Jy ! Component: 200 - total flux cleaned = -0.000587672 Jy ! Total flux subtracted in 200 components = -0.000587672 Jy ! Clean residual min=-0.003580 max=0.004000 Jy/beam ! Clean residual mean=0.000042 rms=0.000952 Jy/beam ! Combined flux in latest and established models = 0.263491 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 102 components and 0.263491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155982Jy sigma=0.000680 ! Fit after self-cal, rms=0.155895Jy sigma=0.000679 wmodel J1246-2547_S_2017_05_27_pus_map.mod ! Writing 102 model components to file: J1246-2547_S_2017_05_27_pus_map.mod wobs J1246-2547_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1246-2547_S_2017_05_27_pus_uvs.fits wwins J1246-2547_S_2017_05_27_pus_map.win ! wwins: Wrote 3 windows to J1246-2547_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135425 Jy ! Component: 100 - total flux cleaned = 0.0015424 Jy ! Component: 150 - total flux cleaned = 0.00142672 Jy ! Component: 200 - total flux cleaned = 0.00131519 Jy ! Component: 250 - total flux cleaned = 0.000997017 Jy ! Component: 300 - total flux cleaned = 0.000690711 Jy ! Component: 350 - total flux cleaned = 0.00054292 Jy ! Component: 400 - total flux cleaned = 0.000541879 Jy ! Component: 450 - total flux cleaned = 0.000634439 Jy ! Component: 500 - total flux cleaned = 0.000725328 Jy ! Component: 550 - total flux cleaned = 0.000860212 Jy ! Component: 600 - total flux cleaned = 0.00112187 Jy ! Component: 650 - total flux cleaned = 0.0011629 Jy ! Component: 700 - total flux cleaned = 0.00128879 Jy ! Component: 750 - total flux cleaned = 0.00132951 Jy ! Component: 800 - total flux cleaned = 0.00141107 Jy ! Component: 850 - total flux cleaned = 0.00133111 Jy ! Component: 900 - total flux cleaned = 0.00137112 Jy ! Component: 950 - total flux cleaned = 0.00133315 Jy ! Component: 1000 - total flux cleaned = 0.00129503 Jy ! Component: 1050 - total flux cleaned = 0.00133191 Jy ! Component: 1100 - total flux cleaned = 0.00133179 Jy ! Component: 1150 - total flux cleaned = 0.00129475 Jy ! Component: 1200 - total flux cleaned = 0.00125857 Jy ! Component: 1250 - total flux cleaned = 0.0012237 Jy ! Component: 1300 - total flux cleaned = 0.00129373 Jy ! Component: 1350 - total flux cleaned = 0.00118968 Jy ! Component: 1400 - total flux cleaned = 0.001019 Jy ! Component: 1450 - total flux cleaned = 0.000984566 Jy ! Component: 1500 - total flux cleaned = 0.000750989 Jy ! Component: 1550 - total flux cleaned = 0.000652255 Jy ! Component: 1600 - total flux cleaned = 0.000456402 Jy ! Component: 1650 - total flux cleaned = 0.000391383 Jy ! Component: 1700 - total flux cleaned = 0.000103376 Jy ! Component: 1750 - total flux cleaned = -8.6803e-05 Jy ! Component: 1800 - total flux cleaned = -0.000431547 Jy ! Component: 1850 - total flux cleaned = -0.000586446 Jy ! Component: 1900 - total flux cleaned = -0.000832222 Jy ! Component: 1950 - total flux cleaned = -0.00101468 Jy ! Component: 2000 - total flux cleaned = -0.00110546 Jy ! Component: 2050 - total flux cleaned = -0.00134467 Jy ! Component: 2100 - total flux cleaned = -0.00158157 Jy ! Component: 2150 - total flux cleaned = -0.00169883 Jy ! Component: 2200 - total flux cleaned = -0.00190238 Jy ! Component: 2250 - total flux cleaned = -0.00207548 Jy ! Component: 2300 - total flux cleaned = -0.00224764 Jy ! Component: 2350 - total flux cleaned = -0.00238972 Jy ! Component: 2400 - total flux cleaned = -0.00264366 Jy ! Component: 2450 - total flux cleaned = -0.00275539 Jy ! Component: 2500 - total flux cleaned = -0.00292243 Jy ! Component: 2550 - total flux cleaned = -0.00303301 Jy ! Component: 2600 - total flux cleaned = -0.00317013 Jy ! Component: 2650 - total flux cleaned = -0.0033609 Jy ! Component: 2700 - total flux cleaned = -0.00346907 Jy ! Component: 2750 - total flux cleaned = -0.00365733 Jy ! Component: 2800 - total flux cleaned = -0.00379058 Jy ! Component: 2850 - total flux cleaned = -0.00389646 Jy ! Component: 2900 - total flux cleaned = -0.00402787 Jy ! Component: 2950 - total flux cleaned = -0.00410659 Jy ! Component: 3000 - total flux cleaned = -0.00421054 Jy ! Component: 3050 - total flux cleaned = -0.00426222 Jy ! Component: 3100 - total flux cleaned = -0.00431344 Jy ! Component: 3150 - total flux cleaned = -0.00438995 Jy ! Component: 3200 - total flux cleaned = -0.00436427 Jy ! Component: 3250 - total flux cleaned = -0.00446542 Jy ! Component: 3300 - total flux cleaned = -0.00451552 Jy ! Component: 3350 - total flux cleaned = -0.00461541 Jy ! Component: 3400 - total flux cleaned = -0.00473954 Jy ! Component: 3450 - total flux cleaned = -0.00476406 Jy ! Component: 3500 - total flux cleaned = -0.00481331 Jy ! Component: 3550 - total flux cleaned = -0.00483798 Jy ! Component: 3600 - total flux cleaned = -0.00491112 Jy ! Component: 3650 - total flux cleaned = -0.00500803 Jy ! Component: 3700 - total flux cleaned = -0.00510447 Jy ! Component: 3750 - total flux cleaned = -0.00515238 Jy ! Component: 3800 - total flux cleaned = -0.00515255 Jy ! Component: 3850 - total flux cleaned = -0.00524758 Jy ! Component: 3900 - total flux cleaned = -0.00534224 Jy ! Component: 3950 - total flux cleaned = -0.00538922 Jy ! Component: 4000 - total flux cleaned = -0.0054129 Jy ! Component: 4050 - total flux cleaned = -0.00555278 Jy ! Total flux subtracted in 4096 components = -0.0055527 Jy ! Clean residual min=-0.001258 max=0.001522 Jy/beam ! Clean residual mean=-0.000004 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.257938 Jy keep ! Adding 250 model components to the UV plane model. ! The established model now contains 352 components and 0.257938 Jy ![Exited script file: muppet] wmap "J1246-2547_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.428 x 9.885 at -9.136 degrees (North through East) ! Clean map min=-0.0030832 max=0.20779 Jy/beam ! Writing clean map to FITS file: J1246-2547_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.207793 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000414588 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.598559 0.598559 1.19712 2.39424 4.78848 9.57695 19.1539 38.3078 76.6156 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.207 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.428 x 9.885 at -9.136 degrees (North through East) ! Clean map min=-0.0030832 max=0.20779 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1246-2547_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:06:42 2019