! Started logfile: J1246-2547_S_2017_03_23_pus_uvs.log on Mon May 13 10:00:23 2019 obs J1246-2547_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J1246-2547_S_2017_03_23_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.783333 visibilities/baseline/integration-bin. ! Found source: J1246-2547 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 2256 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1246-2547_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.628787Jy sigma=0.004117 ! Fit after self-cal, rms=0.601350Jy sigma=0.003931 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.789 mas, bmaj=8.293 mas, bpa=5.081 degrees ! Estimated noise=3042.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.303177 Jy ! Component: 100 - total flux cleaned = 0.390084 Jy ! Total flux subtracted in 100 components = 0.390084 Jy ! Clean residual min=-0.031665 max=0.051813 Jy/beam ! Clean residual mean=0.000246 rms=0.009018 Jy/beam ! Combined flux in latest and established models = 0.390084 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.390084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.212969Jy sigma=0.001219 ! Fit after self-cal, rms=0.212931Jy sigma=0.001219 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.351 mas, bmaj=9.648 mas, bpa=5.32 degrees ! Estimated noise=2529.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.082676 Jy ! Component: 100 - total flux cleaned = 0.131325 Jy ! Component: 150 - total flux cleaned = 0.162598 Jy ! Component: 200 - total flux cleaned = 0.180244 Jy ! Total flux subtracted in 200 components = 0.180244 Jy ! Clean residual min=-0.021642 max=0.039839 Jy/beam ! Clean residual mean=0.000043 rms=0.006717 Jy/beam ! Combined flux in latest and established models = 0.570328 Jy ! Performing phase self-cal ! Adding 66 model components to the UV plane model. ! The established model now contains 80 components and 0.570327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171083Jy sigma=0.000957 ! Fit after self-cal, rms=0.169392Jy sigma=0.000942 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.95 HN 1.31 KP 1.03 ! LA 0.97 MK 1.02 NL 1.00* OV 1.01 ! PT 1.00 SC 0.87 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 1.39 KP 0.97 ! LA 0.95 MK 1.06 NL 1.03 OV 1.04 ! PT 0.97 SC 0.93 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.79 FD 1.05 HN 1.38 KP 0.86 ! LA 0.73 MK 1.09 NL 1.18 OV 0.96 ! PT 0.96 SC 0.91 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.12 HN 1.38 KP 1.00* ! LA 0.62 MK 1.24 NL 1.00* OV 1.12 ! PT 0.98 SC 1.22 ! ! ! Fit before self-cal, rms=0.169392Jy sigma=0.000942 ! Fit after self-cal, rms=0.151704Jy sigma=0.000790 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.423 mas, bmaj=9.773 mas, bpa=7.031 degrees ! Estimated noise=2512.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0145945 Jy ! Component: 100 - total flux cleaned = -0.0151946 Jy ! Component: 150 - total flux cleaned = -0.0157091 Jy ! Component: 200 - total flux cleaned = -0.0157165 Jy ! Total flux subtracted in 200 components = -0.0157165 Jy ! Clean residual min=-0.015859 max=0.017633 Jy/beam ! Clean residual mean=0.000010 rms=0.003869 Jy/beam ! Combined flux in latest and established models = 0.554611 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 101 components and 0.554611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145800Jy sigma=0.000765 ! Fit after self-cal, rms=0.145830Jy sigma=0.000762 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145830Jy sigma=0.000762 ! Fit after self-cal, rms=0.227723Jy sigma=0.000677 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.461 mas, bmaj=9.828 mas, bpa=6.559 degrees ! Estimated noise=2533.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00258196 Jy ! Component: 100 - total flux cleaned = -0.00288077 Jy ! Component: 150 - total flux cleaned = -0.00337566 Jy ! Component: 200 - total flux cleaned = -0.00315478 Jy ! Total flux subtracted in 200 components = -0.00315478 Jy ! Clean residual min=-0.008461 max=0.010717 Jy/beam ! Clean residual mean=-0.000046 rms=0.002243 Jy/beam ! Combined flux in latest and established models = 0.551456 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 117 components and 0.551456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226751Jy sigma=0.000671 ! Fit after self-cal, rms=0.227648Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (21.5, -9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00994498 Jy ! Component: 100 - total flux cleaned = 0.0120398 Jy ! Component: 150 - total flux cleaned = 0.0122356 Jy ! Component: 200 - total flux cleaned = 0.0122407 Jy ! Total flux subtracted in 200 components = 0.0122407 Jy ! Clean residual min=-0.007675 max=0.006940 Jy/beam ! Clean residual mean=-0.000047 rms=0.001874 Jy/beam ! Combined flux in latest and established models = 0.563697 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 137 components and 0.563697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227106Jy sigma=0.000662 ! Fit after self-cal, rms=0.227164Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227164Jy sigma=0.000662 ! Fit after self-cal, rms=0.234343Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.462 mas, bmaj=9.855 mas, bpa=6.552 degrees ! Estimated noise=2521.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000613187 Jy ! Component: 100 - total flux cleaned = -0.000442754 Jy ! Component: 150 - total flux cleaned = 5.56788e-05 Jy ! Component: 200 - total flux cleaned = 0.000212303 Jy ! Total flux subtracted in 200 components = 0.000212303 Jy ! Clean residual min=-0.006572 max=0.006616 Jy/beam ! Clean residual mean=-0.000043 rms=0.001714 Jy/beam ! Combined flux in latest and established models = 0.563909 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 150 components and 0.563909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.233848Jy sigma=0.000658 ! Fit after self-cal, rms=0.233915Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000212941 Jy ! Component: 100 - total flux cleaned = 0.000355792 Jy ! Component: 150 - total flux cleaned = 0.000616986 Jy ! Component: 200 - total flux cleaned = 0.000739819 Jy ! Total flux subtracted in 200 components = 0.000739819 Jy ! Clean residual min=-0.005949 max=0.006425 Jy/beam ! Clean residual mean=-0.000043 rms=0.001654 Jy/beam ! Combined flux in latest and established models = 0.564649 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 169 components and 0.564649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.233608Jy sigma=0.000656 ! Fit after self-cal, rms=0.233626Jy sigma=0.000656 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.233626Jy sigma=0.000656 ! Fit after self-cal, rms=0.236459Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.512 mas, bmaj=19.11 mas, bpa=6.859 degrees ! Estimated noise=3013.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000581731 Jy ! Component: 100 - total flux cleaned = 0.000448944 Jy ! Component: 150 - total flux cleaned = 0.000649067 Jy ! Component: 200 - total flux cleaned = 0.00073959 Jy ! Total flux subtracted in 200 components = 0.00073959 Jy ! Clean residual min=-0.006129 max=0.005592 Jy/beam ! Clean residual mean=-0.000067 rms=0.001742 Jy/beam ! Combined flux in latest and established models = 0.565389 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 182 components and 0.565389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.236238Jy sigma=0.000655 ! Fit after self-cal, rms=0.236197Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.46499e-05 Jy ! Component: 100 - total flux cleaned = 0.000216715 Jy ! Component: 150 - total flux cleaned = 0.000304952 Jy ! Component: 200 - total flux cleaned = 0.000381816 Jy ! Total flux subtracted in 200 components = 0.000381816 Jy ! Clean residual min=-0.006105 max=0.005617 Jy/beam ! Clean residual mean=-0.000067 rms=0.001720 Jy/beam ! Combined flux in latest and established models = 0.565771 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 192 components and 0.565771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.236038Jy sigma=0.000655 ! Fit after self-cal, rms=0.236036Jy sigma=0.000655 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.463 mas, bmaj=9.867 mas, bpa=6.559 degrees ! Estimated noise=2512.09 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.463 x 9.867 at 6.559 degrees (North through East) ! Clean map min=-0.013038 max=0.39097 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.847 mas, bmaj=8.414 mas, bpa=6.168 degrees ! Estimated noise=3154.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.313514 Jy ! Component: 100 - total flux cleaned = 0.399911 Jy ! Component: 150 - total flux cleaned = 0.442454 Jy ! Component: 200 - total flux cleaned = 0.469562 Jy ! Total flux subtracted in 200 components = 0.469562 Jy ! Clean residual min=-0.011571 max=0.015225 Jy/beam ! Clean residual mean=0.000060 rms=0.003144 Jy/beam ! Combined flux in latest and established models = 0.469562 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 43 model components to the UV plane model. ! The established model now contains 43 components and 0.469562 Jy ! Inverting map and beam ! Estimated beam: bmin=3.463 mas, bmaj=9.867 mas, bpa=6.559 degrees ! Estimated noise=2512.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0284008 Jy ! Component: 100 - total flux cleaned = 0.0456583 Jy ! Component: 150 - total flux cleaned = 0.0578579 Jy ! Component: 200 - total flux cleaned = 0.0670293 Jy ! Total flux subtracted in 200 components = 0.0670293 Jy ! Clean residual min=-0.006581 max=0.006823 Jy/beam ! Clean residual mean=-0.000036 rms=0.001908 Jy/beam ! Combined flux in latest and established models = 0.536591 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 94 components and 0.536591 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.512 mas, bmaj=19.11 mas, bpa=6.859 degrees ! Estimated noise=3013.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100063 Jy ! Component: 100 - total flux cleaned = 0.0164009 Jy ! Component: 150 - total flux cleaned = 0.0206869 Jy ! Component: 200 - total flux cleaned = 0.0232084 Jy ! Total flux subtracted in 200 components = 0.0232084 Jy ! Clean residual min=-0.006653 max=0.004924 Jy/beam ! Clean residual mean=-0.000065 rms=0.001727 Jy/beam ! Combined flux in latest and established models = 0.559799 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00090797 Jy ! Component: 100 - total flux cleaned = 0.00164008 Jy ! Component: 150 - total flux cleaned = 0.00189348 Jy ! Component: 200 - total flux cleaned = 0.00206566 Jy ! Total flux subtracted in 200 components = 0.00206566 Jy ! Clean residual min=-0.006386 max=0.004799 Jy/beam ! Clean residual mean=-0.000064 rms=0.001676 Jy/beam ! Combined flux in latest and established models = 0.561865 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 151 components and 0.561865 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.463 mas, bmaj=9.867 mas, bpa=6.559 degrees ! Estimated noise=2512.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00126216 Jy ! Component: 100 - total flux cleaned = -0.00169157 Jy ! Component: 150 - total flux cleaned = -0.00193609 Jy ! Component: 200 - total flux cleaned = -0.00182841 Jy ! Total flux subtracted in 200 components = -0.00182841 Jy ! Clean residual min=-0.005801 max=0.005799 Jy/beam ! Clean residual mean=-0.000034 rms=0.001469 Jy/beam ! Combined flux in latest and established models = 0.560037 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 170 components and 0.560037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.236585Jy sigma=0.000652 ! Fit after self-cal, rms=0.236333Jy sigma=0.000651 wmodel J1246-2547_S_2017_03_23_pus_map.mod ! Writing 170 model components to file: J1246-2547_S_2017_03_23_pus_map.mod wobs J1246-2547_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J1246-2547_S_2017_03_23_pus_uvs.fits wwins J1246-2547_S_2017_03_23_pus_map.win ! wwins: Wrote 3 windows to J1246-2547_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000695062 Jy ! Component: 100 - total flux cleaned = -0.00166475 Jy ! Component: 150 - total flux cleaned = -0.00212625 Jy ! Component: 200 - total flux cleaned = -0.00274347 Jy ! Component: 250 - total flux cleaned = -0.0034211 Jy ! Component: 300 - total flux cleaned = -0.00399771 Jy ! Component: 350 - total flux cleaned = -0.00440041 Jy ! Component: 400 - total flux cleaned = -0.00479336 Jy ! Component: 450 - total flux cleaned = -0.00525446 Jy ! Component: 500 - total flux cleaned = -0.00532989 Jy ! Component: 550 - total flux cleaned = -0.00547987 Jy ! Component: 600 - total flux cleaned = -0.00584444 Jy ! Component: 650 - total flux cleaned = -0.00620296 Jy ! Component: 700 - total flux cleaned = -0.00648496 Jy ! Component: 750 - total flux cleaned = -0.00662492 Jy ! Component: 800 - total flux cleaned = -0.00703585 Jy ! Component: 850 - total flux cleaned = -0.00744075 Jy ! Component: 900 - total flux cleaned = -0.00784008 Jy ! Component: 950 - total flux cleaned = -0.00823353 Jy ! Component: 1000 - total flux cleaned = -0.00836365 Jy ! Component: 1050 - total flux cleaned = -0.00868476 Jy ! Component: 1100 - total flux cleaned = -0.00912753 Jy ! Component: 1150 - total flux cleaned = -0.00956613 Jy ! Component: 1200 - total flux cleaned = -0.00999924 Jy ! Component: 1250 - total flux cleaned = -0.0105489 Jy ! Component: 1300 - total flux cleaned = -0.01085 Jy ! Component: 1350 - total flux cleaned = -0.0112087 Jy ! Component: 1400 - total flux cleaned = -0.0115641 Jy ! Component: 1450 - total flux cleaned = -0.0118562 Jy ! Component: 1500 - total flux cleaned = -0.011973 Jy ! Component: 1550 - total flux cleaned = -0.0123745 Jy ! Component: 1600 - total flux cleaned = -0.0126582 Jy ! Component: 1650 - total flux cleaned = -0.0128831 Jy ! Component: 1700 - total flux cleaned = -0.0129948 Jy ! Component: 1750 - total flux cleaned = -0.0134373 Jy ! Component: 1800 - total flux cleaned = -0.0133824 Jy ! Component: 1850 - total flux cleaned = -0.0137087 Jy ! Component: 1900 - total flux cleaned = -0.0138166 Jy ! Component: 1950 - total flux cleaned = -0.0139768 Jy ! Component: 2000 - total flux cleaned = -0.0143481 Jy ! Component: 2050 - total flux cleaned = -0.0143999 Jy ! Component: 2100 - total flux cleaned = -0.0146087 Jy ! Component: 2150 - total flux cleaned = -0.0146081 Jy ! Component: 2200 - total flux cleaned = -0.0149173 Jy ! Component: 2250 - total flux cleaned = -0.0149679 Jy ! Component: 2300 - total flux cleaned = -0.0151203 Jy ! Component: 2350 - total flux cleaned = -0.0153222 Jy ! Component: 2400 - total flux cleaned = -0.0153721 Jy ! Component: 2450 - total flux cleaned = -0.0155211 Jy ! Component: 2500 - total flux cleaned = -0.0157185 Jy ! Component: 2550 - total flux cleaned = -0.0158166 Jy ! Component: 2600 - total flux cleaned = -0.0160112 Jy ! Component: 2650 - total flux cleaned = -0.0161083 Jy ! Component: 2700 - total flux cleaned = -0.0163006 Jy ! Component: 2750 - total flux cleaned = -0.0163961 Jy ! Component: 2800 - total flux cleaned = -0.0164432 Jy ! Component: 2850 - total flux cleaned = -0.0166321 Jy ! Component: 2900 - total flux cleaned = -0.0168195 Jy ! Component: 2950 - total flux cleaned = -0.0167726 Jy ! Component: 3000 - total flux cleaned = -0.0169119 Jy ! Component: 3050 - total flux cleaned = -0.0171884 Jy ! Component: 3100 - total flux cleaned = -0.01728 Jy ! Component: 3150 - total flux cleaned = -0.0174165 Jy ! Component: 3200 - total flux cleaned = -0.0176427 Jy ! Component: 3250 - total flux cleaned = -0.0176875 Jy ! Component: 3300 - total flux cleaned = -0.017777 Jy ! Component: 3350 - total flux cleaned = -0.0179993 Jy ! Component: 3400 - total flux cleaned = -0.0180878 Jy ! Component: 3450 - total flux cleaned = -0.0182197 Jy ! Component: 3500 - total flux cleaned = -0.0183945 Jy ! Component: 3550 - total flux cleaned = -0.0184381 Jy ! Component: 3600 - total flux cleaned = -0.0186115 Jy ! Component: 3650 - total flux cleaned = -0.0187832 Jy ! Component: 3700 - total flux cleaned = -0.0189114 Jy ! Component: 3750 - total flux cleaned = -0.0189539 Jy ! Component: 3800 - total flux cleaned = -0.0190388 Jy ! Component: 3850 - total flux cleaned = -0.0191656 Jy ! Component: 3900 - total flux cleaned = -0.0192497 Jy ! Component: 3950 - total flux cleaned = -0.019375 Jy ! Component: 4000 - total flux cleaned = -0.0194998 Jy ! Component: 4050 - total flux cleaned = -0.0195825 Jy ! Total flux subtracted in 4096 components = -0.0196647 Jy ! Clean residual min=-0.002433 max=0.002268 Jy/beam ! Clean residual mean=-0.000007 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.540372 Jy keep ! Adding 268 model components to the UV plane model. ! The established model now contains 438 components and 0.540372 Jy ![Exited script file: muppet] wmap "J1246-2547_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.463 x 9.867 at 6.559 degrees (North through East) ! Clean map min=-0.0055701 max=0.39583 Jy/beam ! Writing clean map to FITS file: J1246-2547_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.39583 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00078284 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.593315 0.593315 1.18663 2.37326 4.74652 9.49303 18.9861 37.9721 75.9443 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0023 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.395 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.463 x 9.867 at 6.559 degrees (North through East) ! Clean map min=-0.0055701 max=0.39583 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1246-2547_S_2017_03_23_pus_uvs.log closed on Mon May 13 10:00:27 2019