! Started logfile: J1243-2943_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:42:07 2019 obs J1243-2943_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J1243-2943_S_2017_03_27_pus_uva.fits ! AN table 1: 56 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.682143 visibilities/baseline/integration-bin. ! Found source: J1243-2943 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 6876 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1243-2943_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 231 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.830395Jy sigma=0.004950 ! Fit after self-cal, rms=0.814614Jy sigma=0.004872 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.104 mas, bmaj=11.15 mas, bpa=13.11 degrees ! Estimated noise=2532.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.14949 Jy ! Component: 100 - total flux cleaned = 0.183771 Jy ! Total flux subtracted in 100 components = 0.183771 Jy ! Clean residual min=-0.011774 max=0.016099 Jy/beam ! Clean residual mean=-0.000025 rms=0.003229 Jy/beam ! Combined flux in latest and established models = 0.183771 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.183771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135059Jy sigma=0.000704 ! Fit after self-cal, rms=0.135035Jy sigma=0.000704 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.861 mas, bmaj=13.54 mas, bpa=12.03 degrees ! Estimated noise=1572.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10.5, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0239287 Jy ! Component: 100 - total flux cleaned = 0.0386259 Jy ! Component: 150 - total flux cleaned = 0.0487983 Jy ! Component: 200 - total flux cleaned = 0.0560231 Jy ! Total flux subtracted in 200 components = 0.0560231 Jy ! Clean residual min=-0.006709 max=0.007971 Jy/beam ! Clean residual mean=0.000023 rms=0.002069 Jy/beam ! Combined flux in latest and established models = 0.239794 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 61 components and 0.239794 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130293Jy sigma=0.000670 ! Fit after self-cal, rms=0.130053Jy sigma=0.000668 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.95 HN 1.14 KP 1.04 ! LA 0.99 MK 1.00* NL 0.98 OV 1.03 ! PT 0.93 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 1.12 KP 0.99 ! LA 0.97 MK 1.00* NL 1.06 OV 1.03 ! PT 0.90 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.02 HN 1.08 KP 1.01 ! LA 0.94 MK 1.00* NL 1.01 OV 1.01 ! PT 0.91 SC 1.02 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.05 HN 0.95 KP 1.00* ! LA 0.84 MK 1.00* NL 1.00* OV 0.89 ! PT 0.99 SC 0.88 ! ! ! Fit before self-cal, rms=0.130053Jy sigma=0.000668 ! Fit after self-cal, rms=0.125401Jy sigma=0.000660 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.862 mas, bmaj=13.75 mas, bpa=12.43 degrees ! Estimated noise=1540.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0048882 Jy ! Component: 100 - total flux cleaned = 0.00563711 Jy ! Component: 150 - total flux cleaned = 0.00591039 Jy ! Component: 200 - total flux cleaned = 0.00575513 Jy ! Total flux subtracted in 200 components = 0.00575513 Jy ! Clean residual min=-0.004495 max=0.005869 Jy/beam ! Clean residual mean=0.000018 rms=0.001469 Jy/beam ! Combined flux in latest and established models = 0.245549 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 83 components and 0.245549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125108Jy sigma=0.000658 ! Fit after self-cal, rms=0.125029Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125029Jy sigma=0.000658 ! Fit after self-cal, rms=0.129197Jy sigma=0.000655 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.865 mas, bmaj=13.72 mas, bpa=12.11 degrees ! Estimated noise=1538.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129892 Jy ! Component: 100 - total flux cleaned = 0.0009278 Jy ! Component: 150 - total flux cleaned = 0.000667079 Jy ! Component: 200 - total flux cleaned = 0.000379192 Jy ! Total flux subtracted in 200 components = 0.000379192 Jy ! Clean residual min=-0.004410 max=0.005530 Jy/beam ! Clean residual mean=0.000030 rms=0.001257 Jy/beam ! Combined flux in latest and established models = 0.245928 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 100 components and 0.245928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129085Jy sigma=0.000654 ! Fit after self-cal, rms=0.129183Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (58.5, 32). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00512374 Jy ! Component: 100 - total flux cleaned = 0.00698284 Jy ! Component: 150 - total flux cleaned = 0.00819695 Jy ! Component: 200 - total flux cleaned = 0.00921334 Jy ! Total flux subtracted in 200 components = 0.00921334 Jy ! Clean residual min=-0.004239 max=0.003914 Jy/beam ! Clean residual mean=0.000021 rms=0.001071 Jy/beam ! Combined flux in latest and established models = 0.255141 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 125 components and 0.255141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128940Jy sigma=0.000653 ! Fit after self-cal, rms=0.128938Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128938Jy sigma=0.000652 ! Fit after self-cal, rms=0.129555Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.871 mas, bmaj=13.74 mas, bpa=12.08 degrees ! Estimated noise=1534.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187284 Jy ! Component: 100 - total flux cleaned = 0.0025067 Jy ! Component: 150 - total flux cleaned = 0.0025644 Jy ! Component: 200 - total flux cleaned = 0.00256792 Jy ! Total flux subtracted in 200 components = 0.00256792 Jy ! Clean residual min=-0.004073 max=0.003615 Jy/beam ! Clean residual mean=0.000014 rms=0.001013 Jy/beam ! Combined flux in latest and established models = 0.257709 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 140 components and 0.257709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129481Jy sigma=0.000652 ! Fit after self-cal, rms=0.129500Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000856827 Jy ! Component: 100 - total flux cleaned = 0.000858246 Jy ! Component: 150 - total flux cleaned = 0.000816235 Jy ! Component: 200 - total flux cleaned = 0.000815391 Jy ! Total flux subtracted in 200 components = 0.000815391 Jy ! Clean residual min=-0.004047 max=0.003511 Jy/beam ! Clean residual mean=0.000014 rms=0.000997 Jy/beam ! Combined flux in latest and established models = 0.258525 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 152 components and 0.258525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129455Jy sigma=0.000652 ! Fit after self-cal, rms=0.129457Jy sigma=0.000652 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129457Jy sigma=0.000652 ! Fit after self-cal, rms=0.129620Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.265 mas, bmaj=21.34 mas, bpa=2.534 degrees ! Estimated noise=1758.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101498 Jy ! Component: 100 - total flux cleaned = 0.00172458 Jy ! Component: 150 - total flux cleaned = 0.00190134 Jy ! Component: 200 - total flux cleaned = 0.00193167 Jy ! Total flux subtracted in 200 components = 0.00193167 Jy ! Clean residual min=-0.003582 max=0.004154 Jy/beam ! Clean residual mean=0.000017 rms=0.001178 Jy/beam ! Combined flux in latest and established models = 0.260456 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 167 components and 0.260456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129606Jy sigma=0.000652 ! Fit after self-cal, rms=0.129606Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000315025 Jy ! Component: 100 - total flux cleaned = 0.0004407 Jy ! Component: 150 - total flux cleaned = 0.00052136 Jy ! Component: 200 - total flux cleaned = 0.00052017 Jy ! Total flux subtracted in 200 components = 0.00052017 Jy ! Clean residual min=-0.003519 max=0.004091 Jy/beam ! Clean residual mean=0.000017 rms=0.001158 Jy/beam ! Combined flux in latest and established models = 0.260977 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 179 components and 0.260977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129598Jy sigma=0.000652 ! Fit after self-cal, rms=0.129593Jy sigma=0.000652 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.875 mas, bmaj=13.74 mas, bpa=12.07 degrees ! Estimated noise=1533.39 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.875 x 13.74 at 12.07 degrees (North through East) ! Clean map min=-0.003748 max=0.188 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.098 mas, bmaj=11.29 mas, bpa=13.17 degrees ! Estimated noise=2472.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.145552 Jy ! Component: 100 - total flux cleaned = 0.180077 Jy ! Component: 150 - total flux cleaned = 0.197726 Jy ! Component: 200 - total flux cleaned = 0.209549 Jy ! Total flux subtracted in 200 components = 0.209549 Jy ! Clean residual min=-0.006847 max=0.007081 Jy/beam ! Clean residual mean=-0.000008 rms=0.001917 Jy/beam ! Combined flux in latest and established models = 0.209549 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.209549 Jy ! Inverting map and beam ! Estimated beam: bmin=3.875 mas, bmaj=13.74 mas, bpa=12.07 degrees ! Estimated noise=1533.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127884 Jy ! Component: 100 - total flux cleaned = 0.0208847 Jy ! Component: 150 - total flux cleaned = 0.0268561 Jy ! Component: 200 - total flux cleaned = 0.0315922 Jy ! Total flux subtracted in 200 components = 0.0315922 Jy ! Clean residual min=-0.004736 max=0.004036 Jy/beam ! Clean residual mean=0.000018 rms=0.001235 Jy/beam ! Combined flux in latest and established models = 0.241141 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 84 components and 0.241141 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.265 mas, bmaj=21.34 mas, bpa=2.534 degrees ! Estimated noise=1758.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00528652 Jy ! Component: 100 - total flux cleaned = 0.00912033 Jy ! Component: 150 - total flux cleaned = 0.0121065 Jy ! Component: 200 - total flux cleaned = 0.0144651 Jy ! Total flux subtracted in 200 components = 0.0144651 Jy ! Clean residual min=-0.003651 max=0.004078 Jy/beam ! Clean residual mean=0.000022 rms=0.001257 Jy/beam ! Combined flux in latest and established models = 0.255606 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180286 Jy ! Component: 100 - total flux cleaned = 0.00278697 Jy ! Component: 150 - total flux cleaned = 0.00362685 Jy ! Component: 200 - total flux cleaned = 0.00394899 Jy ! Total flux subtracted in 200 components = 0.00394899 Jy ! Clean residual min=-0.003409 max=0.004042 Jy/beam ! Clean residual mean=0.000018 rms=0.001184 Jy/beam ! Combined flux in latest and established models = 0.259555 Jy ! Adding 73 model components to the UV plane model. ! The established model now contains 146 components and 0.259555 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.875 mas, bmaj=13.74 mas, bpa=12.07 degrees ! Estimated noise=1533.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000223007 Jy ! Component: 100 - total flux cleaned = 0.000152345 Jy ! Component: 150 - total flux cleaned = 9.22956e-05 Jy ! Component: 200 - total flux cleaned = 9.12809e-05 Jy ! Total flux subtracted in 200 components = 9.12809e-05 Jy ! Clean residual min=-0.003651 max=0.003628 Jy/beam ! Clean residual mean=0.000010 rms=0.000986 Jy/beam ! Combined flux in latest and established models = 0.259646 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 166 components and 0.259646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129697Jy sigma=0.000652 ! Fit after self-cal, rms=0.129668Jy sigma=0.000652 wmodel J1243-2943_S_2017_03_27_pus_map.mod ! Writing 166 model components to file: J1243-2943_S_2017_03_27_pus_map.mod wobs J1243-2943_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J1243-2943_S_2017_03_27_pus_uvs.fits wwins J1243-2943_S_2017_03_27_pus_map.win ! wwins: Wrote 3 windows to J1243-2943_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00117482 Jy ! Component: 100 - total flux cleaned = -0.00159146 Jy ! Component: 150 - total flux cleaned = -0.00176307 Jy ! Component: 200 - total flux cleaned = -0.0018164 Jy ! Component: 250 - total flux cleaned = -0.00166116 Jy ! Component: 300 - total flux cleaned = -0.00165968 Jy ! Component: 350 - total flux cleaned = -0.00165921 Jy ! Component: 400 - total flux cleaned = -0.00165999 Jy ! Component: 450 - total flux cleaned = -0.00161564 Jy ! Component: 500 - total flux cleaned = -0.00174953 Jy ! Component: 550 - total flux cleaned = -0.00170469 Jy ! Component: 600 - total flux cleaned = -0.00170513 Jy ! Component: 650 - total flux cleaned = -0.00162233 Jy ! Component: 700 - total flux cleaned = -0.00170351 Jy ! Component: 750 - total flux cleaned = -0.00174307 Jy ! Component: 800 - total flux cleaned = -0.00170635 Jy ! Component: 850 - total flux cleaned = -0.00174408 Jy ! Component: 900 - total flux cleaned = -0.00167053 Jy ! Component: 950 - total flux cleaned = -0.00163426 Jy ! Component: 1000 - total flux cleaned = -0.00152863 Jy ! Component: 1050 - total flux cleaned = -0.001565 Jy ! Component: 1100 - total flux cleaned = -0.00159929 Jy ! Component: 1150 - total flux cleaned = -0.0014646 Jy ! Component: 1200 - total flux cleaned = -0.00139839 Jy ! Component: 1250 - total flux cleaned = -0.0013004 Jy ! Component: 1300 - total flux cleaned = -0.00104551 Jy ! Component: 1350 - total flux cleaned = -0.000983054 Jy ! Component: 1400 - total flux cleaned = -0.000736385 Jy ! Component: 1450 - total flux cleaned = -0.000494489 Jy ! Component: 1500 - total flux cleaned = -0.00040564 Jy ! Component: 1550 - total flux cleaned = -0.000259341 Jy ! Component: 1600 - total flux cleaned = -0.000115244 Jy ! Component: 1650 - total flux cleaned = -1.41431e-06 Jy ! Component: 1700 - total flux cleaned = 5.46075e-05 Jy ! Component: 1750 - total flux cleaned = 0.000193103 Jy ! Component: 1800 - total flux cleaned = 0.000329659 Jy ! Component: 1850 - total flux cleaned = 0.000409941 Jy ! Component: 1900 - total flux cleaned = 0.000542088 Jy ! Component: 1950 - total flux cleaned = 0.000594542 Jy ! Component: 2000 - total flux cleaned = 0.000671848 Jy ! Component: 2050 - total flux cleaned = 0.000748091 Jy ! Component: 2100 - total flux cleaned = 0.000748257 Jy ! Component: 2150 - total flux cleaned = 0.000797953 Jy ! Component: 2200 - total flux cleaned = 0.000822099 Jy ! Component: 2250 - total flux cleaned = 0.000990714 Jy ! Component: 2300 - total flux cleaned = 0.000990549 Jy ! Component: 2350 - total flux cleaned = 0.00101384 Jy ! Component: 2400 - total flux cleaned = 0.00106021 Jy ! Component: 2450 - total flux cleaned = 0.00117511 Jy ! Component: 2500 - total flux cleaned = 0.00124339 Jy ! Component: 2550 - total flux cleaned = 0.0013109 Jy ! Component: 2600 - total flux cleaned = 0.00137794 Jy ! Component: 2650 - total flux cleaned = 0.00137785 Jy ! Component: 2700 - total flux cleaned = 0.00137787 Jy ! Component: 2750 - total flux cleaned = 0.00142149 Jy ! Component: 2800 - total flux cleaned = 0.00142146 Jy ! Component: 2850 - total flux cleaned = 0.00148551 Jy ! Component: 2900 - total flux cleaned = 0.00154879 Jy ! Component: 2950 - total flux cleaned = 0.0014861 Jy ! Component: 3000 - total flux cleaned = 0.0015902 Jy ! Component: 3050 - total flux cleaned = 0.00148733 Jy ! Component: 3100 - total flux cleaned = 0.00154855 Jy ! Component: 3150 - total flux cleaned = 0.00144722 Jy ! Component: 3200 - total flux cleaned = 0.00152786 Jy ! Component: 3250 - total flux cleaned = 0.00150803 Jy ! Component: 3300 - total flux cleaned = 0.00154759 Jy ! Component: 3350 - total flux cleaned = 0.00154726 Jy ! Component: 3400 - total flux cleaned = 0.00156657 Jy ! Component: 3450 - total flux cleaned = 0.00158571 Jy ! Component: 3500 - total flux cleaned = 0.00160489 Jy ! Component: 3550 - total flux cleaned = 0.00166214 Jy ! Component: 3600 - total flux cleaned = 0.00170028 Jy ! Component: 3650 - total flux cleaned = 0.00179433 Jy ! Component: 3700 - total flux cleaned = 0.00188788 Jy ! Component: 3750 - total flux cleaned = 0.00192488 Jy ! Component: 3800 - total flux cleaned = 0.0019248 Jy ! Component: 3850 - total flux cleaned = 0.00207172 Jy ! Component: 3900 - total flux cleaned = 0.00207167 Jy ! Component: 3950 - total flux cleaned = 0.00214428 Jy ! Component: 4000 - total flux cleaned = 0.0022165 Jy ! Component: 4050 - total flux cleaned = 0.00234204 Jy ! Total flux subtracted in 4096 components = 0.00237765 Jy ! Clean residual min=-0.001322 max=0.001018 Jy/beam ! Clean residual mean=0.000005 rms=0.000347 Jy/beam ! Combined flux in latest and established models = 0.262024 Jy keep ! Adding 307 model components to the UV plane model. ! The established model now contains 473 components and 0.262024 Jy ![Exited script file: muppet] wmap "J1243-2943_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.875 x 13.74 at 12.07 degrees (North through East) ! Clean map min=-0.0026065 max=0.18811 Jy/beam ! Writing clean map to FITS file: J1243-2943_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.188112 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000341975 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.54538 0.54538 1.09076 2.18152 4.36304 8.72608 17.4522 34.9043 69.8087 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.188 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.875 x 13.74 at 12.07 degrees (North through East) ! Clean map min=-0.0026065 max=0.18811 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1243-2943_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:42:11 2019