! Started logfile: J1242+3751_S_2017_06_15_pus_uvs.log on Tue May 7 15:18:22 2019 obs J1242+3751_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J1242+3751_S_2017_06_15_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.406667 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1242+3751 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 732 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1242+3751_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 79 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.554327Jy sigma=0.004677 ! Fit after self-cal, rms=0.521369Jy sigma=0.004404 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.845 mas, bmaj=11.97 mas, bpa=88.3 degrees ! Estimated noise=4068.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.376812 Jy ! Component: 100 - total flux cleaned = 0.458986 Jy ! Total flux subtracted in 100 components = 0.458986 Jy ! Clean residual min=-0.015994 max=0.022949 Jy/beam ! Clean residual mean=-0.000126 rms=0.005553 Jy/beam ! Combined flux in latest and established models = 0.458986 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.458986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090793Jy sigma=0.000743 ! Fit after self-cal, rms=0.090790Jy sigma=0.000743 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.739 mas, bmaj=11.87 mas, bpa=86.05 degrees ! Estimated noise=3538.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0218668 Jy ! Component: 100 - total flux cleaned = 0.0311685 Jy ! Component: 150 - total flux cleaned = 0.0320768 Jy ! Component: 200 - total flux cleaned = 0.0327985 Jy ! Total flux subtracted in 200 components = 0.0327985 Jy ! Clean residual min=-0.012039 max=0.013861 Jy/beam ! Clean residual mean=-0.000021 rms=0.003628 Jy/beam ! Combined flux in latest and established models = 0.491785 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 32 components and 0.491785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085334Jy sigma=0.000703 ! Fit after self-cal, rms=0.085311Jy sigma=0.000702 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 0.98 KP 1.03 ! LA 1.00 MK 1.00* NL 0.91 OV 1.04 ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.07 HN 1.03 KP 0.99 ! LA 1.00 MK 1.00* NL 1.06 OV 0.86 ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.08 HN 1.05 KP 1.02 ! LA 1.00 MK 1.00* NL 0.98 OV 0.97 ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.085311Jy sigma=0.000702 ! Fit after self-cal, rms=0.078058Jy sigma=0.000652 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.928 mas, bmaj=11.64 mas, bpa=86.89 degrees ! Estimated noise=3586.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00589079 Jy ! Component: 100 - total flux cleaned = 0.00768114 Jy ! Component: 150 - total flux cleaned = 0.00791494 Jy ! Component: 200 - total flux cleaned = 0.00819182 Jy ! Total flux subtracted in 200 components = 0.00819182 Jy ! Clean residual min=-0.007472 max=0.006746 Jy/beam ! Clean residual mean=-0.000018 rms=0.002001 Jy/beam ! Combined flux in latest and established models = 0.499976 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 43 components and 0.499976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077559Jy sigma=0.000647 ! Fit after self-cal, rms=0.077560Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077560Jy sigma=0.000647 ! Fit after self-cal, rms=0.077505Jy sigma=0.000646 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.933 mas, bmaj=11.61 mas, bpa=86.88 degrees ! Estimated noise=3584.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00220194 Jy ! Component: 100 - total flux cleaned = 0.00276165 Jy ! Component: 150 - total flux cleaned = 0.00293185 Jy ! Component: 200 - total flux cleaned = 0.00293181 Jy ! Total flux subtracted in 200 components = 0.00293181 Jy ! Clean residual min=-0.007028 max=0.006090 Jy/beam ! Clean residual mean=-0.000021 rms=0.001853 Jy/beam ! Combined flux in latest and established models = 0.502908 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 49 components and 0.502908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077393Jy sigma=0.000645 ! Fit after self-cal, rms=0.077391Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.53978e-05 Jy ! Component: 100 - total flux cleaned = 8.50837e-05 Jy ! Component: 150 - total flux cleaned = 2.06589e-05 Jy ! Component: 200 - total flux cleaned = -3.71398e-05 Jy ! Total flux subtracted in 200 components = -3.71398e-05 Jy ! Clean residual min=-0.006826 max=0.006184 Jy/beam ! Clean residual mean=-0.000021 rms=0.001825 Jy/beam ! Combined flux in latest and established models = 0.502871 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 54 components and 0.502871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077364Jy sigma=0.000645 ! Fit after self-cal, rms=0.077363Jy sigma=0.000645 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077363Jy sigma=0.000645 ! Fit after self-cal, rms=0.077391Jy sigma=0.000645 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.939 mas, bmaj=11.59 mas, bpa=86.85 degrees ! Estimated noise=3585.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000701576 Jy ! Component: 100 - total flux cleaned = 0.000764906 Jy ! Component: 150 - total flux cleaned = 0.000841572 Jy ! Component: 200 - total flux cleaned = 0.000864229 Jy ! Total flux subtracted in 200 components = 0.000864229 Jy ! Clean residual min=-0.006768 max=0.006176 Jy/beam ! Clean residual mean=-0.000023 rms=0.001788 Jy/beam ! Combined flux in latest and established models = 0.503735 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 64 components and 0.503735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077369Jy sigma=0.000644 ! Fit after self-cal, rms=0.077370Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.35153e-05 Jy ! Component: 100 - total flux cleaned = 6.38051e-05 Jy ! Component: 150 - total flux cleaned = 8.34343e-05 Jy ! Component: 200 - total flux cleaned = 8.34143e-05 Jy ! Total flux subtracted in 200 components = 8.34143e-05 Jy ! Clean residual min=-0.006694 max=0.006149 Jy/beam ! Clean residual mean=-0.000023 rms=0.001780 Jy/beam ! Combined flux in latest and established models = 0.503819 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 69 components and 0.503819 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077360Jy sigma=0.000644 ! Fit after self-cal, rms=0.077360Jy sigma=0.000644 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077360Jy sigma=0.000644 ! Fit after self-cal, rms=0.077377Jy sigma=0.000644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.553 mas, bmaj=12.04 mas, bpa=82.48 degrees ! Estimated noise=3714.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000747483 Jy ! Component: 100 - total flux cleaned = 0.000878573 Jy ! Component: 150 - total flux cleaned = 0.00100537 Jy ! Component: 200 - total flux cleaned = 0.00104209 Jy ! Total flux subtracted in 200 components = 0.00104209 Jy ! Clean residual min=-0.006089 max=0.006148 Jy/beam ! Clean residual mean=-0.000031 rms=0.001856 Jy/beam ! Combined flux in latest and established models = 0.504861 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 84 components and 0.504861 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077365Jy sigma=0.000644 ! Fit after self-cal, rms=0.077365Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000125852 Jy ! Component: 100 - total flux cleaned = 0.000143296 Jy ! Component: 150 - total flux cleaned = 0.000177645 Jy ! Component: 200 - total flux cleaned = 0.000211524 Jy ! Total flux subtracted in 200 components = 0.000211524 Jy ! Clean residual min=-0.006090 max=0.006108 Jy/beam ! Clean residual mean=-0.000030 rms=0.001847 Jy/beam ! Combined flux in latest and established models = 0.505072 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 87 components and 0.505072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077358Jy sigma=0.000644 ! Fit after self-cal, rms=0.077357Jy sigma=0.000644 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=6.944 mas, bmaj=11.58 mas, bpa=86.81 degrees ! Estimated noise=3585.4 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.944 x 11.58 at 86.81 degrees (North through East) ! Clean map min=-0.0065914 max=0.48415 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.055 mas, bmaj=11.79 mas, bpa=89.71 degrees ! Estimated noise=4169.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.378161 Jy ! Component: 100 - total flux cleaned = 0.460634 Jy ! Component: 150 - total flux cleaned = 0.482341 Jy ! Component: 200 - total flux cleaned = 0.492121 Jy ! Total flux subtracted in 200 components = 0.492121 Jy ! Clean residual min=-0.010125 max=0.007597 Jy/beam ! Clean residual mean=-0.000037 rms=0.002617 Jy/beam ! Combined flux in latest and established models = 0.492121 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.492121 Jy ! Inverting map and beam ! Estimated beam: bmin=6.944 mas, bmaj=11.58 mas, bpa=86.81 degrees ! Estimated noise=3585.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00581755 Jy ! Component: 100 - total flux cleaned = 0.00892524 Jy ! Component: 150 - total flux cleaned = 0.010217 Jy ! Component: 200 - total flux cleaned = 0.0111728 Jy ! Total flux subtracted in 200 components = 0.0111728 Jy ! Clean residual min=-0.007285 max=0.006586 Jy/beam ! Clean residual mean=-0.000028 rms=0.001916 Jy/beam ! Combined flux in latest and established models = 0.503294 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 32 components and 0.503294 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.553 mas, bmaj=12.04 mas, bpa=82.48 degrees ! Estimated noise=3714.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000993086 Jy ! Component: 100 - total flux cleaned = 0.00163376 Jy ! Component: 150 - total flux cleaned = 0.00214603 Jy ! Component: 200 - total flux cleaned = 0.00240591 Jy ! Total flux subtracted in 200 components = 0.00240591 Jy ! Clean residual min=-0.006204 max=0.006358 Jy/beam ! Clean residual mean=-0.000033 rms=0.001886 Jy/beam ! Combined flux in latest and established models = 0.5057 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000112856 Jy ! Component: 100 - total flux cleaned = 0.000183596 Jy ! Component: 150 - total flux cleaned = 0.000151385 Jy ! Component: 200 - total flux cleaned = 0.00018373 Jy ! Total flux subtracted in 200 components = 0.00018373 Jy ! Clean residual min=-0.006089 max=0.006342 Jy/beam ! Clean residual mean=-0.000032 rms=0.001868 Jy/beam ! Combined flux in latest and established models = 0.505884 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 54 components and 0.505884 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=6.944 mas, bmaj=11.58 mas, bpa=86.81 degrees ! Estimated noise=3585.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.667e-05 Jy ! Component: 100 - total flux cleaned = -0.000190221 Jy ! Component: 150 - total flux cleaned = -0.00022949 Jy ! Component: 200 - total flux cleaned = -0.000192222 Jy ! Total flux subtracted in 200 components = -0.000192222 Jy ! Clean residual min=-0.006645 max=0.006517 Jy/beam ! Clean residual mean=-0.000024 rms=0.001786 Jy/beam ! Combined flux in latest and established models = 0.505691 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 63 components and 0.505691 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077394Jy sigma=0.000644 ! Fit after self-cal, rms=0.077392Jy sigma=0.000644 wmodel J1242+3751_S_2017_06_15_pus_map.mod ! Writing 63 model components to file: J1242+3751_S_2017_06_15_pus_map.mod wobs J1242+3751_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J1242+3751_S_2017_06_15_pus_uvs.fits wwins J1242+3751_S_2017_06_15_pus_map.win ! wwins: Wrote 1 windows to J1242+3751_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000242394 Jy ! Component: 100 - total flux cleaned = -0.000835448 Jy ! Component: 150 - total flux cleaned = -0.00128079 Jy ! Component: 200 - total flux cleaned = -0.00144038 Jy ! Component: 250 - total flux cleaned = -0.00158785 Jy ! Component: 300 - total flux cleaned = -0.00186821 Jy ! Component: 350 - total flux cleaned = -0.00213284 Jy ! Component: 400 - total flux cleaned = -0.00250669 Jy ! Component: 450 - total flux cleaned = -0.00292325 Jy ! Component: 500 - total flux cleaned = -0.00355195 Jy ! Component: 550 - total flux cleaned = -0.00399435 Jy ! Component: 600 - total flux cleaned = -0.00420832 Jy ! Component: 650 - total flux cleaned = -0.00451894 Jy ! Component: 700 - total flux cleaned = -0.00472027 Jy ! Component: 750 - total flux cleaned = -0.0049172 Jy ! Component: 800 - total flux cleaned = -0.00487008 Jy ! Component: 850 - total flux cleaned = -0.00487101 Jy ! Component: 900 - total flux cleaned = -0.00487113 Jy ! Component: 950 - total flux cleaned = -0.00491674 Jy ! Component: 1000 - total flux cleaned = -0.00491687 Jy ! Component: 1050 - total flux cleaned = -0.0048727 Jy ! Component: 1100 - total flux cleaned = -0.00487289 Jy ! Component: 1150 - total flux cleaned = -0.00478606 Jy ! Component: 1200 - total flux cleaned = -0.00457161 Jy ! Component: 1250 - total flux cleaned = -0.00444392 Jy ! Component: 1300 - total flux cleaned = -0.0043167 Jy ! Component: 1350 - total flux cleaned = -0.00406314 Jy ! Component: 1400 - total flux cleaned = -0.00389419 Jy ! Component: 1450 - total flux cleaned = -0.00372562 Jy ! Component: 1500 - total flux cleaned = -0.00372553 Jy ! Component: 1550 - total flux cleaned = -0.00363993 Jy ! Component: 1600 - total flux cleaned = -0.00359717 Jy ! Component: 1650 - total flux cleaned = -0.00351061 Jy ! Component: 1700 - total flux cleaned = -0.00342309 Jy ! Component: 1750 - total flux cleaned = -0.00342337 Jy ! Component: 1800 - total flux cleaned = -0.00346774 Jy ! Component: 1850 - total flux cleaned = -0.00351219 Jy ! Component: 1900 - total flux cleaned = -0.00351157 Jy ! Component: 1950 - total flux cleaned = -0.00355859 Jy ! Component: 2000 - total flux cleaned = -0.00355898 Jy ! Component: 2050 - total flux cleaned = -0.00360725 Jy ! Component: 2100 - total flux cleaned = -0.00360656 Jy ! Component: 2150 - total flux cleaned = -0.0036066 Jy ! Component: 2200 - total flux cleaned = -0.00360732 Jy ! Component: 2250 - total flux cleaned = -0.00360701 Jy ! Component: 2300 - total flux cleaned = -0.00360745 Jy ! Component: 2350 - total flux cleaned = -0.0035537 Jy ! Component: 2400 - total flux cleaned = -0.00360807 Jy ! Component: 2450 - total flux cleaned = -0.00355192 Jy ! Component: 2500 - total flux cleaned = -0.00355147 Jy ! Component: 2550 - total flux cleaned = -0.0035508 Jy ! Component: 2600 - total flux cleaned = -0.00355057 Jy ! Component: 2650 - total flux cleaned = -0.00355039 Jy ! Component: 2700 - total flux cleaned = -0.00348831 Jy ! Component: 2750 - total flux cleaned = -0.00348792 Jy ! Component: 2800 - total flux cleaned = -0.00348803 Jy ! Component: 2850 - total flux cleaned = -0.00348788 Jy ! Component: 2900 - total flux cleaned = -0.00348711 Jy ! Component: 2950 - total flux cleaned = -0.0034871 Jy ! Component: 3000 - total flux cleaned = -0.00348688 Jy ! Component: 3050 - total flux cleaned = -0.00348699 Jy ! Component: 3100 - total flux cleaned = -0.00356048 Jy ! Component: 3150 - total flux cleaned = -0.00356099 Jy ! Component: 3200 - total flux cleaned = -0.00356128 Jy ! Component: 3250 - total flux cleaned = -0.00356132 Jy ! Component: 3300 - total flux cleaned = -0.00356117 Jy ! Component: 3350 - total flux cleaned = -0.00356099 Jy ! Component: 3400 - total flux cleaned = -0.003561 Jy ! Component: 3450 - total flux cleaned = -0.00356088 Jy ! Component: 3500 - total flux cleaned = -0.00356115 Jy ! Component: 3550 - total flux cleaned = -0.00356114 Jy ! Component: 3600 - total flux cleaned = -0.00356036 Jy ! Component: 3650 - total flux cleaned = -0.0035604 Jy ! Component: 3700 - total flux cleaned = -0.00356197 Jy ! Component: 3750 - total flux cleaned = -0.00356276 Jy ! Component: 3800 - total flux cleaned = -0.00356282 Jy ! Component: 3850 - total flux cleaned = -0.00345946 Jy ! Component: 3900 - total flux cleaned = -0.00345754 Jy ! Component: 3950 - total flux cleaned = -0.00345559 Jy ! Component: 4000 - total flux cleaned = -0.0034546 Jy ! Component: 4050 - total flux cleaned = -0.00345486 Jy ! Total flux subtracted in 4096 components = -0.00345548 Jy ! Clean residual min=-0.005854 max=0.006247 Jy/beam ! Clean residual mean=-0.000005 rms=0.001774 Jy/beam ! Combined flux in latest and established models = 0.502236 Jy keep ! Adding 183 model components to the UV plane model. ! The established model now contains 246 components and 0.502236 Jy ![Exited script file: muppet] wmap "J1242+3751_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.944 x 11.58 at 86.81 degrees (North through East) ! Clean map min=-0.0147 max=0.48621 Jy/beam ! Writing clean map to FITS file: J1242+3751_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.486213 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00205337 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.26695 1.26695 2.53391 5.06782 10.1356 20.2713 40.5425 81.0851 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0061 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.486 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.944 x 11.58 at 86.81 degrees (North through East) ! Clean map min=-0.0147 max=0.48621 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1242+3751_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:18:26 2019