! Started logfile: J1239+0443_S_2017_05_01_pus_uvs.log on Wed May 1 18:36:11 2019 obs J1239+0443_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J1239+0443_S_2017_05_01_pus_uva.fits ! AN table 1: 83 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.959036 visibilities/baseline/integration-bin. ! Found source: J1239+0443 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 14328 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1239+0443_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 350 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.703946Jy sigma=0.029886 ! Fit after self-cal, rms=0.694686Jy sigma=0.029751 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.1 mas, bmaj=7.55 mas, bpa=-6.081 degrees ! Estimated noise=728.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.158271 Jy ! Component: 100 - total flux cleaned = 0.18016 Jy ! Total flux subtracted in 100 components = 0.18016 Jy ! Clean residual min=-0.060330 max=0.057382 Jy/beam ! Clean residual mean=0.000123 rms=0.018785 Jy/beam ! Combined flux in latest and established models = 0.18016 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.18016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189686Jy sigma=0.005371 ! Fit after self-cal, rms=0.189628Jy sigma=0.005370 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.714 mas, bmaj=8.454 mas, bpa=-5.37 degrees ! Estimated noise=571.077 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0198028 Jy ! Component: 100 - total flux cleaned = 0.0171854 Jy ! Component: 150 - total flux cleaned = 0.0149559 Jy ! Component: 200 - total flux cleaned = 0.0125813 Jy ! Total flux subtracted in 200 components = 0.0125813 Jy ! Clean residual min=-0.048562 max=0.061241 Jy/beam ! Clean residual mean=0.000444 rms=0.016415 Jy/beam ! Combined flux in latest and established models = 0.192741 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.192741 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172503Jy sigma=0.005931 ! Fit after self-cal, rms=0.172493Jy sigma=0.005931 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.79 FD 0.70 HN 0.96 KP 0.79 ! LA 0.74 MK 0.92 NL 0.78 OV 0.79 ! PT 0.77 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 0.72 HN 0.98 KP 0.76 ! LA 0.71 MK 0.91 NL 0.85 OV 0.81 ! PT 0.75 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 0.76 HN 0.96 KP 0.77 ! LA 0.76 MK 0.91 NL 0.85 OV 0.74 ! PT 0.75 SC 1.03 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.79 HN 1.00 KP 1.00* ! LA 34.27 MK 1.01 NL 1.00* OV 1.00* ! PT 0.80 SC 1.00* ! ! ! Fit before self-cal, rms=0.172493Jy sigma=0.005931 ! Fit after self-cal, rms=2.206216Jy sigma=0.000738 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.659 mas, bmaj=8.166 mas, bpa=-2.568 degrees ! Estimated noise=571.148 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.5, 8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00698016 Jy ! Component: 100 - total flux cleaned = 0.0100664 Jy ! Component: 150 - total flux cleaned = 0.0105437 Jy ! Component: 200 - total flux cleaned = 0.0106508 Jy ! Total flux subtracted in 200 components = 0.0106508 Jy ! Clean residual min=-0.003525 max=0.004342 Jy/beam ! Clean residual mean=0.000008 rms=0.001051 Jy/beam ! Combined flux in latest and established models = 0.203392 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 24 components and 0.203392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.205898Jy sigma=0.000732 ! Fit after self-cal, rms=2.206108Jy sigma=0.000718 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.206108Jy sigma=0.000718 ! Fit after self-cal, rms=2.696710Jy sigma=0.000697 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.642 mas, bmaj=8.113 mas, bpa=-2.6 degrees ! Estimated noise=576.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00443027 Jy ! Component: 100 - total flux cleaned = 0.0063885 Jy ! Component: 150 - total flux cleaned = 0.0067065 Jy ! Component: 200 - total flux cleaned = 0.00677853 Jy ! Total flux subtracted in 200 components = 0.00677853 Jy ! Clean residual min=-0.002796 max=0.003700 Jy/beam ! Clean residual mean=0.000009 rms=0.000772 Jy/beam ! Combined flux in latest and established models = 0.21017 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 40 components and 0.21017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.696333Jy sigma=0.000695 ! Fit after self-cal, rms=2.696334Jy sigma=0.000695 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-18, -9.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00191003 Jy ! Component: 100 - total flux cleaned = 0.00199025 Jy ! Component: 150 - total flux cleaned = 0.00192244 Jy ! Component: 200 - total flux cleaned = 0.00185933 Jy ! Total flux subtracted in 200 components = 0.00185933 Jy ! Clean residual min=-0.002622 max=0.002786 Jy/beam ! Clean residual mean=0.000010 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.21203 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 54 components and 0.21203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.696102Jy sigma=0.000694 ! Fit after self-cal, rms=2.696100Jy sigma=0.000694 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.696100Jy sigma=0.000694 ! Fit after self-cal, rms=1.163883Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.625 mas, bmaj=8.096 mas, bpa=-2.71 degrees ! Estimated noise=577.349 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00206707 Jy ! Component: 100 - total flux cleaned = 0.00259976 Jy ! Component: 150 - total flux cleaned = 0.0024928 Jy ! Component: 200 - total flux cleaned = 0.00249463 Jy ! Total flux subtracted in 200 components = 0.00249463 Jy ! Clean residual min=-0.001684 max=0.002371 Jy/beam ! Clean residual mean=0.000004 rms=0.000438 Jy/beam ! Combined flux in latest and established models = 0.214524 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 67 components and 0.214524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.163819Jy sigma=0.000662 ! Fit after self-cal, rms=1.163812Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2, -10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118634 Jy ! Component: 100 - total flux cleaned = 0.00143021 Jy ! Component: 150 - total flux cleaned = 0.00159167 Jy ! Component: 200 - total flux cleaned = 0.00168817 Jy ! Total flux subtracted in 200 components = 0.00168817 Jy ! Clean residual min=-0.001536 max=0.001795 Jy/beam ! Clean residual mean=0.000005 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 0.216212 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 80 components and 0.216212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.163801Jy sigma=0.000660 ! Fit after self-cal, rms=1.163801Jy sigma=0.000660 ! Inverting map ! Added new window around map position (-1.5, 23). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000812351 Jy ! Component: 100 - total flux cleaned = 0.000902831 Jy ! Component: 150 - total flux cleaned = 0.00078086 Jy ! Component: 200 - total flux cleaned = 0.000664499 Jy ! Total flux subtracted in 200 components = 0.000664499 Jy ! Clean residual min=-0.001537 max=0.001598 Jy/beam ! Clean residual mean=0.000005 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.216877 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 99 components and 0.216877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.163790Jy sigma=0.000660 ! Fit after self-cal, rms=1.163791Jy sigma=0.000660 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.163791Jy sigma=0.000660 ! Fit after self-cal, rms=1.172176Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.038 mas, bmaj=12.08 mas, bpa=1.917 degrees ! Estimated noise=643.175 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0004947 Jy ! Component: 100 - total flux cleaned = 0.000521025 Jy ! Component: 150 - total flux cleaned = 0.000543683 Jy ! Component: 200 - total flux cleaned = 0.000544421 Jy ! Total flux subtracted in 200 components = 0.000544421 Jy ! Clean residual min=-0.001440 max=0.001408 Jy/beam ! Clean residual mean=0.000007 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 0.217421 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 125 components and 0.217421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.172149Jy sigma=0.000659 ! Fit after self-cal, rms=1.172151Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.92932e-05 Jy ! Component: 100 - total flux cleaned = -7.1528e-05 Jy ! Component: 150 - total flux cleaned = -8.68095e-05 Jy ! Component: 200 - total flux cleaned = -8.61333e-05 Jy ! Total flux subtracted in 200 components = -8.61333e-05 Jy ! Clean residual min=-0.001459 max=0.001368 Jy/beam ! Clean residual mean=0.000007 rms=0.000367 Jy/beam ! Combined flux in latest and established models = 0.217335 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 134 components and 0.217335 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.172143Jy sigma=0.000659 ! Fit after self-cal, rms=1.172144Jy sigma=0.000659 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.622 mas, bmaj=8.087 mas, bpa=-2.679 degrees ! Estimated noise=578.848 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.622 x 8.087 at -2.679 degrees (North through East) ! Clean map min=-0.0031908 max=0.22443 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3 mas, bmaj=7.199 mas, bpa=-3.521 degrees ! Estimated noise=780.203 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.170124 Jy ! Component: 100 - total flux cleaned = 0.207318 Jy ! Component: 150 - total flux cleaned = 0.218286 Jy ! Component: 200 - total flux cleaned = 0.221907 Jy ! Total flux subtracted in 200 components = 0.221907 Jy ! Clean residual min=-0.002902 max=0.003390 Jy/beam ! Clean residual mean=0.000001 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 0.221907 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.221907 Jy ! Inverting map and beam ! Estimated beam: bmin=3.622 mas, bmaj=8.087 mas, bpa=-2.679 degrees ! Estimated noise=578.848 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000138022 Jy ! Component: 100 - total flux cleaned = 8.30195e-05 Jy ! Component: 150 - total flux cleaned = -0.000121299 Jy ! Component: 200 - total flux cleaned = -0.000302438 Jy ! Total flux subtracted in 200 components = -0.000302438 Jy ! Clean residual min=-0.001971 max=0.001909 Jy/beam ! Clean residual mean=0.000005 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.221605 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 36 components and 0.221605 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.038 mas, bmaj=12.08 mas, bpa=1.917 degrees ! Estimated noise=643.175 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00150424 Jy ! Component: 100 - total flux cleaned = -0.00212406 Jy ! Component: 150 - total flux cleaned = -0.00235154 Jy ! Component: 200 - total flux cleaned = -0.00259365 Jy ! Total flux subtracted in 200 components = -0.00259365 Jy ! Clean residual min=-0.001574 max=0.001677 Jy/beam ! Clean residual mean=0.000008 rms=0.000408 Jy/beam ! Combined flux in latest and established models = 0.219011 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000181977 Jy ! Component: 100 - total flux cleaned = -0.00035006 Jy ! Component: 150 - total flux cleaned = -0.000476986 Jy ! Component: 200 - total flux cleaned = -0.000596006 Jy ! Total flux subtracted in 200 components = -0.000596006 Jy ! Clean residual min=-0.001555 max=0.001562 Jy/beam ! Clean residual mean=0.000008 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.218415 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 68 components and 0.218415 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.622 mas, bmaj=8.087 mas, bpa=-2.679 degrees ! Estimated noise=578.848 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131605 Jy ! Component: 100 - total flux cleaned = 0.00124928 Jy ! Component: 150 - total flux cleaned = 0.00118833 Jy ! Component: 200 - total flux cleaned = 0.00112918 Jy ! Total flux subtracted in 200 components = 0.00112918 Jy ! Clean residual min=-0.001774 max=0.001699 Jy/beam ! Clean residual mean=0.000004 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.219544 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 88 components and 0.219544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.172120Jy sigma=0.000660 ! Fit after self-cal, rms=1.172125Jy sigma=0.000660 wmodel J1239+0443_S_2017_05_01_pus_map.mod ! Writing 88 model components to file: J1239+0443_S_2017_05_01_pus_map.mod wobs J1239+0443_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J1239+0443_S_2017_05_01_pus_uvs.fits wwins J1239+0443_S_2017_05_01_pus_map.win ! wwins: Wrote 5 windows to J1239+0443_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 5.01134e-05 Jy ! Component: 100 - total flux cleaned = 0.000166242 Jy ! Component: 150 - total flux cleaned = 0.000248415 Jy ! Component: 200 - total flux cleaned = 0.000381062 Jy ! Component: 250 - total flux cleaned = 0.000457992 Jy ! Component: 300 - total flux cleaned = 0.000558109 Jy ! Component: 350 - total flux cleaned = 0.000582818 Jy ! Component: 400 - total flux cleaned = 0.000679003 Jy ! Component: 450 - total flux cleaned = 0.000725728 Jy ! Component: 500 - total flux cleaned = 0.000795123 Jy ! Component: 550 - total flux cleaned = 0.00081767 Jy ! Component: 600 - total flux cleaned = 0.000907295 Jy ! Component: 650 - total flux cleaned = 0.000951432 Jy ! Component: 700 - total flux cleaned = 0.00105999 Jy ! Component: 750 - total flux cleaned = 0.0011026 Jy ! Component: 800 - total flux cleaned = 0.00112381 Jy ! Component: 850 - total flux cleaned = 0.00114458 Jy ! Component: 900 - total flux cleaned = 0.00122661 Jy ! Component: 950 - total flux cleaned = 0.00130745 Jy ! Component: 1000 - total flux cleaned = 0.0013868 Jy ! Component: 1050 - total flux cleaned = 0.00132725 Jy ! Component: 1100 - total flux cleaned = 0.00140581 Jy ! Component: 1150 - total flux cleaned = 0.00142515 Jy ! Component: 1200 - total flux cleaned = 0.0015207 Jy ! Component: 1250 - total flux cleaned = 0.00163375 Jy ! Component: 1300 - total flux cleaned = 0.0016709 Jy ! Component: 1350 - total flux cleaned = 0.00165242 Jy ! Component: 1400 - total flux cleaned = 0.00176255 Jy ! Component: 1450 - total flux cleaned = 0.00181672 Jy ! Component: 1500 - total flux cleaned = 0.00178085 Jy ! Component: 1550 - total flux cleaned = 0.00190553 Jy ! Component: 1600 - total flux cleaned = 0.00188782 Jy ! Component: 1650 - total flux cleaned = 0.00195779 Jy ! Component: 1700 - total flux cleaned = 0.00194055 Jy ! Component: 1750 - total flux cleaned = 0.00199192 Jy ! Component: 1800 - total flux cleaned = 0.00200877 Jy ! Component: 1850 - total flux cleaned = 0.00200898 Jy ! Component: 1900 - total flux cleaned = 0.00204248 Jy ! Component: 1950 - total flux cleaned = 0.00210888 Jy ! Component: 2000 - total flux cleaned = 0.00212542 Jy ! Component: 2050 - total flux cleaned = 0.00219052 Jy ! Component: 2100 - total flux cleaned = 0.00215797 Jy ! Component: 2150 - total flux cleaned = 0.00220629 Jy ! Component: 2200 - total flux cleaned = 0.00225394 Jy ! Component: 2250 - total flux cleaned = 0.00226961 Jy ! Component: 2300 - total flux cleaned = 0.00225391 Jy ! Component: 2350 - total flux cleaned = 0.0022385 Jy ! Component: 2400 - total flux cleaned = 0.00231576 Jy ! Component: 2450 - total flux cleaned = 0.00230032 Jy ! Component: 2500 - total flux cleaned = 0.00236109 Jy ! Component: 2550 - total flux cleaned = 0.00236087 Jy ! Component: 2600 - total flux cleaned = 0.00230106 Jy ! Component: 2650 - total flux cleaned = 0.00236072 Jy ! Component: 2700 - total flux cleaned = 0.00233131 Jy ! Component: 2750 - total flux cleaned = 0.00247815 Jy ! Component: 2800 - total flux cleaned = 0.00243429 Jy ! Component: 2850 - total flux cleaned = 0.00246305 Jy ! Component: 2900 - total flux cleaned = 0.0024917 Jy ! Component: 2950 - total flux cleaned = 0.00252019 Jy ! Component: 3000 - total flux cleaned = 0.00252013 Jy ! Component: 3050 - total flux cleaned = 0.00259076 Jy ! Component: 3100 - total flux cleaned = 0.00260464 Jy ! Component: 3150 - total flux cleaned = 0.00256279 Jy ! Component: 3200 - total flux cleaned = 0.00265962 Jy ! Component: 3250 - total flux cleaned = 0.0026733 Jy ! Component: 3300 - total flux cleaned = 0.00274156 Jy ! Component: 3350 - total flux cleaned = 0.0027143 Jy ! Component: 3400 - total flux cleaned = 0.00276831 Jy ! Component: 3450 - total flux cleaned = 0.00282188 Jy ! Component: 3500 - total flux cleaned = 0.0028485 Jy ! Component: 3550 - total flux cleaned = 0.00287493 Jy ! Component: 3600 - total flux cleaned = 0.00300677 Jy ! Component: 3650 - total flux cleaned = 0.00300683 Jy ! Component: 3700 - total flux cleaned = 0.00315011 Jy ! Component: 3750 - total flux cleaned = 0.00320204 Jy ! Component: 3800 - total flux cleaned = 0.00322783 Jy ! Component: 3850 - total flux cleaned = 0.00329187 Jy ! Component: 3900 - total flux cleaned = 0.00338105 Jy ! Component: 3950 - total flux cleaned = 0.00344436 Jy ! Component: 4000 - total flux cleaned = 0.00344433 Jy ! Component: 4050 - total flux cleaned = 0.00349447 Jy ! Total flux subtracted in 4096 components = 0.00359417 Jy ! Clean residual min=-0.000687 max=0.000677 Jy/beam ! Clean residual mean=0.000003 rms=0.000227 Jy/beam ! Combined flux in latest and established models = 0.223138 Jy keep ! Adding 304 model components to the UV plane model. ! The established model now contains 389 components and 0.223138 Jy ![Exited script file: muppet] wmap "J1239+0443_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.622 x 8.087 at -2.679 degrees (North through East) ! Clean map min=-0.0018081 max=0.22073 Jy/beam ! Writing clean map to FITS file: J1239+0443_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.220727 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000226074 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.307268 0.307268 0.614536 1.22907 2.45814 4.91629 9.83258 19.6652 39.3303 78.6606 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.22 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.622 x 8.087 at -2.679 degrees (North through East) ! Clean map min=-0.0018081 max=0.22073 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1239+0443_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:36:15 2019