! Started logfile: J1238-1959_S_2017_08_05_pus_uvs.log on Thu May 9 19:29:40 2019 obs J1238-1959_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J1238-1959_S_2017_08_05_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.769006 visibilities/baseline/integration-bin. ! Found source: J1238-1959 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 10520 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1238-1959_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 91 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 91 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 91 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 488 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.902996Jy sigma=0.006752 ! Fit after self-cal, rms=0.878765Jy sigma=0.006582 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.392 mas, bmaj=6.652 mas, bpa=-8.705 degrees ! Estimated noise=1625.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0929818 Jy ! Component: 100 - total flux cleaned = 0.11461 Jy ! Total flux subtracted in 100 components = 0.11461 Jy ! Clean residual min=-0.006724 max=0.008284 Jy/beam ! Clean residual mean=-0.000021 rms=0.001677 Jy/beam ! Combined flux in latest and established models = 0.11461 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.11461 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097887Jy sigma=0.000680 ! Fit after self-cal, rms=0.097885Jy sigma=0.000680 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.958 mas, bmaj=7.895 mas, bpa=-6.366 degrees ! Estimated noise=1053.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134916 Jy ! Component: 100 - total flux cleaned = 0.0198897 Jy ! Component: 150 - total flux cleaned = 0.0231848 Jy ! Component: 200 - total flux cleaned = 0.0249834 Jy ! Total flux subtracted in 200 components = 0.0249834 Jy ! Clean residual min=-0.003114 max=0.003124 Jy/beam ! Clean residual mean=-0.000012 rms=0.000904 Jy/beam ! Combined flux in latest and established models = 0.139594 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 32 components and 0.139594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096029Jy sigma=0.000668 ! Fit after self-cal, rms=0.096044Jy sigma=0.000667 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.01 KP 1.09 ! LA 0.96 MK 0.99 NL 0.90 OV 0.99 ! PT 1.03 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.06 KP 1.01 ! LA 1.00 MK 0.96 NL 0.98 OV 1.08 ! PT 1.00 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.06 KP 0.85 ! LA 0.76 MK 1.02 NL 1.20 OV 0.98 ! PT 0.98 SC 1.02 ! ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.05 KP 1.00* ! LA 1.00* MK 1.30 NL 1.00* OV 1.00* ! PT 1.10 SC 1.00* ! ! ! Fit before self-cal, rms=0.096044Jy sigma=0.000667 ! Fit after self-cal, rms=0.093147Jy sigma=0.000660 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.984 mas, bmaj=7.908 mas, bpa=-6.027 degrees ! Estimated noise=1053.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000786568 Jy ! Component: 100 - total flux cleaned = -0.000844246 Jy ! Component: 150 - total flux cleaned = -0.000867545 Jy ! Component: 200 - total flux cleaned = -0.000888146 Jy ! Total flux subtracted in 200 components = -0.000888146 Jy ! Clean residual min=-0.002722 max=0.003313 Jy/beam ! Clean residual mean=-0.000001 rms=0.000712 Jy/beam ! Combined flux in latest and established models = 0.138705 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 38 components and 0.138705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093130Jy sigma=0.000660 ! Fit after self-cal, rms=0.093135Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093135Jy sigma=0.000659 ! Fit after self-cal, rms=0.094078Jy sigma=0.000658 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.985 mas, bmaj=7.912 mas, bpa=-5.939 degrees ! Estimated noise=1052.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.49838e-05 Jy ! Component: 100 - total flux cleaned = -0.000109649 Jy ! Component: 150 - total flux cleaned = -0.00010975 Jy ! Component: 200 - total flux cleaned = -0.000122099 Jy ! Total flux subtracted in 200 components = -0.000122099 Jy ! Clean residual min=-0.002941 max=0.002646 Jy/beam ! Clean residual mean=-0.000000 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.138583 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 44 components and 0.138583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094074Jy sigma=0.000658 ! Fit after self-cal, rms=0.094110Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.02534e-05 Jy ! Component: 100 - total flux cleaned = -2.99866e-05 Jy ! Component: 150 - total flux cleaned = -3.05059e-05 Jy ! Component: 200 - total flux cleaned = -4.07555e-05 Jy ! Total flux subtracted in 200 components = -4.07555e-05 Jy ! Clean residual min=-0.002917 max=0.002645 Jy/beam ! Clean residual mean=-0.000000 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 0.138543 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 44 components and 0.138543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094107Jy sigma=0.000657 ! Fit after self-cal, rms=0.094106Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094106Jy sigma=0.000657 ! Fit after self-cal, rms=0.094187Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.985 mas, bmaj=7.91 mas, bpa=-5.914 degrees ! Estimated noise=1051.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00012655 Jy ! Component: 100 - total flux cleaned = -0.000115766 Jy ! Component: 150 - total flux cleaned = -0.000105809 Jy ! Component: 200 - total flux cleaned = -0.000106067 Jy ! Total flux subtracted in 200 components = -0.000106067 Jy ! Clean residual min=-0.002936 max=0.002591 Jy/beam ! Clean residual mean=-0.000000 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.138437 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 46 components and 0.138437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094185Jy sigma=0.000657 ! Fit after self-cal, rms=0.094187Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.76471e-05 Jy ! Component: 100 - total flux cleaned = -1.81909e-05 Jy ! Component: 150 - total flux cleaned = -9.62814e-06 Jy ! Component: 200 - total flux cleaned = -9.69651e-06 Jy ! Total flux subtracted in 200 components = -9.69651e-06 Jy ! Clean residual min=-0.002923 max=0.002587 Jy/beam ! Clean residual mean=-0.000000 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.138427 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 46 components and 0.138427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094185Jy sigma=0.000657 ! Fit after self-cal, rms=0.094185Jy sigma=0.000657 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094185Jy sigma=0.000657 ! Fit after self-cal, rms=0.094155Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.346 mas, bmaj=17.32 mas, bpa=-4.314 degrees ! Estimated noise=1358.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.62961e-06 Jy ! Component: 100 - total flux cleaned = 2.70682e-06 Jy ! Component: 150 - total flux cleaned = 3.24507e-06 Jy ! Component: 200 - total flux cleaned = 1.48277e-05 Jy ! Total flux subtracted in 200 components = 1.48277e-05 Jy ! Clean residual min=-0.001973 max=0.002428 Jy/beam ! Clean residual mean=0.000001 rms=0.000681 Jy/beam ! Combined flux in latest and established models = 0.138442 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 48 components and 0.138442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094158Jy sigma=0.000657 ! Fit after self-cal, rms=0.094155Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.20589e-05 Jy ! Component: 100 - total flux cleaned = -5.28826e-06 Jy ! Component: 150 - total flux cleaned = -1.78538e-05 Jy ! Component: 200 - total flux cleaned = -1.83081e-05 Jy ! Total flux subtracted in 200 components = -1.83081e-05 Jy ! Clean residual min=-0.001962 max=0.002427 Jy/beam ! Clean residual mean=0.000001 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.138423 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 49 components and 0.138423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094158Jy sigma=0.000657 ! Fit after self-cal, rms=0.094156Jy sigma=0.000657 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.985 mas, bmaj=7.909 mas, bpa=-5.88 degrees ! Estimated noise=1050.73 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.985 x 7.909 at -5.88 degrees (North through East) ! Clean map min=-0.0028451 max=0.12352 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.42 mas, bmaj=6.657 mas, bpa=-7.978 degrees ! Estimated noise=1644.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0934922 Jy ! Component: 100 - total flux cleaned = 0.114887 Jy ! Component: 150 - total flux cleaned = 0.124044 Jy ! Component: 200 - total flux cleaned = 0.129513 Jy ! Total flux subtracted in 200 components = 0.129513 Jy ! Clean residual min=-0.004775 max=0.004843 Jy/beam ! Clean residual mean=-0.000006 rms=0.001258 Jy/beam ! Combined flux in latest and established models = 0.129513 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.129513 Jy ! Inverting map and beam ! Estimated beam: bmin=2.985 mas, bmaj=7.909 mas, bpa=-5.88 degrees ! Estimated noise=1050.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00496568 Jy ! Component: 100 - total flux cleaned = 0.00734647 Jy ! Component: 150 - total flux cleaned = 0.00853715 Jy ! Component: 200 - total flux cleaned = 0.00874269 Jy ! Total flux subtracted in 200 components = 0.00874269 Jy ! Clean residual min=-0.002900 max=0.002547 Jy/beam ! Clean residual mean=-0.000000 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 0.138256 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 25 components and 0.138256 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.346 mas, bmaj=17.32 mas, bpa=-4.314 degrees ! Estimated noise=1358.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000395435 Jy ! Component: 100 - total flux cleaned = 0.000374169 Jy ! Component: 150 - total flux cleaned = 0.000337931 Jy ! Component: 200 - total flux cleaned = 0.000322339 Jy ! Total flux subtracted in 200 components = 0.000322339 Jy ! Clean residual min=-0.001938 max=0.002450 Jy/beam ! Clean residual mean=0.000002 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.138578 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.83959e-05 Jy ! Component: 100 - total flux cleaned = -4.06886e-05 Jy ! Component: 150 - total flux cleaned = -6.26327e-05 Jy ! Component: 200 - total flux cleaned = -7.19345e-05 Jy ! Total flux subtracted in 200 components = -7.19345e-05 Jy ! Clean residual min=-0.001952 max=0.002432 Jy/beam ! Clean residual mean=0.000001 rms=0.000681 Jy/beam ! Combined flux in latest and established models = 0.138506 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 30 components and 0.138506 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.985 mas, bmaj=7.909 mas, bpa=-5.88 degrees ! Estimated noise=1050.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.97786e-05 Jy ! Component: 100 - total flux cleaned = -6.18967e-05 Jy ! Component: 150 - total flux cleaned = -4.52939e-05 Jy ! Component: 200 - total flux cleaned = -3.96916e-06 Jy ! Total flux subtracted in 200 components = -3.96916e-06 Jy ! Clean residual min=-0.002926 max=0.002574 Jy/beam ! Clean residual mean=0.000000 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.138502 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 42 components and 0.138502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094148Jy sigma=0.000657 ! Fit after self-cal, rms=0.094141Jy sigma=0.000657 wmodel J1238-1959_S_2017_08_05_pus_map.mod ! Writing 42 model components to file: J1238-1959_S_2017_08_05_pus_map.mod wobs J1238-1959_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J1238-1959_S_2017_08_05_pus_uvs.fits wwins J1238-1959_S_2017_08_05_pus_map.win ! wwins: Wrote 1 windows to J1238-1959_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000110843 Jy ! Component: 100 - total flux cleaned = 0.000489483 Jy ! Component: 150 - total flux cleaned = 0.000729528 Jy ! Component: 200 - total flux cleaned = 0.000918826 Jy ! Component: 250 - total flux cleaned = 0.00091671 Jy ! Component: 300 - total flux cleaned = 0.000952082 Jy ! Component: 350 - total flux cleaned = 0.00108712 Jy ! Component: 400 - total flux cleaned = 0.00115238 Jy ! Component: 450 - total flux cleaned = 0.00121618 Jy ! Component: 500 - total flux cleaned = 0.00121704 Jy ! Component: 550 - total flux cleaned = 0.00130764 Jy ! Component: 600 - total flux cleaned = 0.00127876 Jy ! Component: 650 - total flux cleaned = 0.0013351 Jy ! Component: 700 - total flux cleaned = 0.00133479 Jy ! Component: 750 - total flux cleaned = 0.00128046 Jy ! Component: 800 - total flux cleaned = 0.00138679 Jy ! Component: 850 - total flux cleaned = 0.00136025 Jy ! Component: 900 - total flux cleaned = 0.00141118 Jy ! Component: 950 - total flux cleaned = 0.00148595 Jy ! Component: 1000 - total flux cleaned = 0.00151036 Jy ! Component: 1050 - total flux cleaned = 0.00148537 Jy ! Component: 1100 - total flux cleaned = 0.00148569 Jy ! Component: 1150 - total flux cleaned = 0.00153213 Jy ! Component: 1200 - total flux cleaned = 0.00144053 Jy ! Component: 1250 - total flux cleaned = 0.00148627 Jy ! Component: 1300 - total flux cleaned = 0.0014419 Jy ! Component: 1350 - total flux cleaned = 0.00141991 Jy ! Component: 1400 - total flux cleaned = 0.00139825 Jy ! Component: 1450 - total flux cleaned = 0.00133446 Jy ! Component: 1500 - total flux cleaned = 0.00131348 Jy ! Component: 1550 - total flux cleaned = 0.00131319 Jy ! Component: 1600 - total flux cleaned = 0.00116952 Jy ! Component: 1650 - total flux cleaned = 0.00114957 Jy ! Component: 1700 - total flux cleaned = 0.00106972 Jy ! Component: 1750 - total flux cleaned = 0.00104993 Jy ! Component: 1800 - total flux cleaned = 0.00106911 Jy ! Component: 1850 - total flux cleaned = 0.00103083 Jy ! Component: 1900 - total flux cleaned = 0.000993305 Jy ! Component: 1950 - total flux cleaned = 0.000993305 Jy ! Component: 2000 - total flux cleaned = 0.000974993 Jy ! Component: 2050 - total flux cleaned = 0.00095697 Jy ! Component: 2100 - total flux cleaned = 0.00101081 Jy ! Component: 2150 - total flux cleaned = 0.000992718 Jy ! Component: 2200 - total flux cleaned = 0.000975337 Jy ! Component: 2250 - total flux cleaned = 0.000957884 Jy ! Component: 2300 - total flux cleaned = 0.000992382 Jy ! Component: 2350 - total flux cleaned = 0.000958359 Jy ! Component: 2400 - total flux cleaned = 0.000924847 Jy ! Component: 2450 - total flux cleaned = 0.00104208 Jy ! Component: 2500 - total flux cleaned = 0.00102558 Jy ! Component: 2550 - total flux cleaned = 0.000993173 Jy ! Component: 2600 - total flux cleaned = 0.00107427 Jy ! Component: 2650 - total flux cleaned = 0.00107424 Jy ! Component: 2700 - total flux cleaned = 0.00105828 Jy ! Component: 2750 - total flux cleaned = 0.00110564 Jy ! Component: 2800 - total flux cleaned = 0.00107442 Jy ! Component: 2850 - total flux cleaned = 0.00104345 Jy ! Component: 2900 - total flux cleaned = 0.0010128 Jy ! Component: 2950 - total flux cleaned = 0.000982486 Jy ! Component: 3000 - total flux cleaned = 0.000967321 Jy ! Component: 3050 - total flux cleaned = 0.000982351 Jy ! Component: 3100 - total flux cleaned = 0.000908312 Jy ! Component: 3150 - total flux cleaned = 0.000893449 Jy ! Component: 3200 - total flux cleaned = 0.000849792 Jy ! Component: 3250 - total flux cleaned = 0.000820921 Jy ! Component: 3300 - total flux cleaned = 0.000720493 Jy ! Component: 3350 - total flux cleaned = 0.000720427 Jy ! Component: 3400 - total flux cleaned = 0.000678072 Jy ! Component: 3450 - total flux cleaned = 0.000636054 Jy ! Component: 3500 - total flux cleaned = 0.000636137 Jy ! Component: 3550 - total flux cleaned = 0.000566865 Jy ! Component: 3600 - total flux cleaned = 0.000580762 Jy ! Component: 3650 - total flux cleaned = 0.000553681 Jy ! Component: 3700 - total flux cleaned = 0.000540228 Jy ! Component: 3750 - total flux cleaned = 0.000500175 Jy ! Component: 3800 - total flux cleaned = 0.00048674 Jy ! Component: 3850 - total flux cleaned = 0.00044726 Jy ! Component: 3900 - total flux cleaned = 0.000460362 Jy ! Component: 3950 - total flux cleaned = 0.000434132 Jy ! Component: 4000 - total flux cleaned = 0.000421271 Jy ! Component: 4050 - total flux cleaned = 0.000395557 Jy ! Total flux subtracted in 4096 components = 0.000408314 Jy ! Clean residual min=-0.000836 max=0.000749 Jy/beam ! Clean residual mean=-0.000001 rms=0.000227 Jy/beam ! Combined flux in latest and established models = 0.138911 Jy keep ! Adding 250 model components to the UV plane model. ! The established model now contains 292 components and 0.138911 Jy ![Exited script file: muppet] wmap "J1238-1959_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.985 x 7.909 at -5.88 degrees (North through East) ! Clean map min=-0.0017705 max=0.12358 Jy/beam ! Writing clean map to FITS file: J1238-1959_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.123581 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000222216 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.539442 0.539442 1.07888 2.15777 4.31554 8.63107 17.2621 34.5243 69.0486 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.123 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.985 x 7.909 at -5.88 degrees (North through East) ! Clean map min=-0.0017705 max=0.12358 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1238-1959_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:29:45 2019