! Started logfile: J1235+1233_S_2017_04_28_pus_uvs.log on Thu May 2 16:26:08 2019 obs J1235+1233_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J1235+1233_S_2017_04_28_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.844639 visibilities/baseline/integration-bin. ! Found source: J1235+1233 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 17332 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1235+1233_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 553 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.956764Jy sigma=0.033364 ! Fit after self-cal, rms=0.940551Jy sigma=0.033311 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.129 mas, bmaj=7.443 mas, bpa=-4.106 degrees ! Estimated noise=560.019 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0311378 Jy ! Component: 100 - total flux cleaned = 0.0384312 Jy ! Total flux subtracted in 100 components = 0.0384312 Jy ! Clean residual min=-0.012420 max=0.012315 Jy/beam ! Clean residual mean=-0.000116 rms=0.004163 Jy/beam ! Combined flux in latest and established models = 0.0384312 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0384312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088527Jy sigma=0.001335 ! Fit after self-cal, rms=0.088479Jy sigma=0.001330 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.67 mas, bmaj=8.307 mas, bpa=-3.756 degrees ! Estimated noise=493.447 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00635951 Jy ! Component: 100 - total flux cleaned = 0.00623902 Jy ! Component: 150 - total flux cleaned = 0.00559664 Jy ! Component: 200 - total flux cleaned = 0.0049573 Jy ! Total flux subtracted in 200 components = 0.0049573 Jy ! Clean residual min=-0.011717 max=0.011113 Jy/beam ! Clean residual mean=-0.000149 rms=0.003765 Jy/beam ! Combined flux in latest and established models = 0.0433885 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 15 components and 0.0433885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086484Jy sigma=0.001499 ! Fit after self-cal, rms=0.086446Jy sigma=0.001499 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.76 FD 0.79 HN 0.86 KP 0.79 ! LA 0.78 MK 0.91 NL 0.85 OV 0.87 ! PT 0.85 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.68 HN 0.88 KP 0.76 ! LA 0.73 MK 0.88 NL 1.05 OV 0.86 ! PT 0.80 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.72 HN 0.91 KP 0.76 ! LA 0.86 MK 0.88 NL 0.97 OV 0.75 ! PT 0.81 SC 0.98 ! ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.68 HN 0.94 KP 1.00* ! LA 18.20 MK 0.79 NL 1.00* OV 1.00* ! PT 1.15 SC 1.00* ! ! ! Fit before self-cal, rms=0.086446Jy sigma=0.001499 ! Fit after self-cal, rms=0.374480Jy sigma=0.000667 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.619 mas, bmaj=8.014 mas, bpa=-0.9233 degrees ! Estimated noise=496.097 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10.5, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00284365 Jy ! Component: 100 - total flux cleaned = 0.00459409 Jy ! Component: 150 - total flux cleaned = 0.00516365 Jy ! Component: 200 - total flux cleaned = 0.00554138 Jy ! Total flux subtracted in 200 components = 0.00554138 Jy ! Clean residual min=-0.001882 max=0.002146 Jy/beam ! Clean residual mean=-0.000004 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.0489298 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 41 components and 0.0489298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.374279Jy sigma=0.000666 ! Fit after self-cal, rms=0.374966Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.374966Jy sigma=0.000662 ! Fit after self-cal, rms=0.283184Jy sigma=0.000658 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.571 mas, bmaj=7.977 mas, bpa=-1.429 degrees ! Estimated noise=491.384 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155869 Jy ! Component: 100 - total flux cleaned = 0.00213258 Jy ! Component: 150 - total flux cleaned = 0.00244703 Jy ! Component: 200 - total flux cleaned = 0.00262908 Jy ! Total flux subtracted in 200 components = 0.00262908 Jy ! Clean residual min=-0.001429 max=0.001448 Jy/beam ! Clean residual mean=0.000001 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.0515589 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 52 components and 0.0515589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.283125Jy sigma=0.000657 ! Fit after self-cal, rms=0.283103Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000420609 Jy ! Component: 100 - total flux cleaned = 0.000517913 Jy ! Component: 150 - total flux cleaned = 0.000517175 Jy ! Component: 200 - total flux cleaned = 0.000517083 Jy ! Total flux subtracted in 200 components = 0.000517083 Jy ! Clean residual min=-0.001464 max=0.001398 Jy/beam ! Clean residual mean=0.000001 rms=0.000378 Jy/beam ! Combined flux in latest and established models = 0.052076 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 62 components and 0.052076 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.283092Jy sigma=0.000656 ! Fit after self-cal, rms=0.283094Jy sigma=0.000656 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.283094Jy sigma=0.000656 ! Fit after self-cal, rms=0.060163Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.552 mas, bmaj=7.949 mas, bpa=-1.572 degrees ! Estimated noise=489.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000490493 Jy ! Component: 100 - total flux cleaned = 0.00065643 Jy ! Component: 150 - total flux cleaned = 0.000718137 Jy ! Component: 200 - total flux cleaned = 0.00079133 Jy ! Total flux subtracted in 200 components = 0.00079133 Jy ! Clean residual min=-0.001325 max=0.001277 Jy/beam ! Clean residual mean=0.000003 rms=0.000321 Jy/beam ! Combined flux in latest and established models = 0.0528673 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 75 components and 0.0528673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060143Jy sigma=0.000653 ! Fit after self-cal, rms=0.060070Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.60778e-05 Jy ! Component: 100 - total flux cleaned = 0.000155519 Jy ! Component: 150 - total flux cleaned = 0.000171721 Jy ! Component: 200 - total flux cleaned = 0.000202215 Jy ! Total flux subtracted in 200 components = 0.000202215 Jy ! Clean residual min=-0.001279 max=0.001262 Jy/beam ! Clean residual mean=0.000003 rms=0.000319 Jy/beam ! Combined flux in latest and established models = 0.0530696 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 80 components and 0.0530695 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060060Jy sigma=0.000653 ! Fit after self-cal, rms=0.060061Jy sigma=0.000653 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060061Jy sigma=0.000653 ! Fit after self-cal, rms=0.059693Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.283 mas, bmaj=10.77 mas, bpa=-3.005 degrees ! Estimated noise=585.265 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000790503 Jy ! Component: 100 - total flux cleaned = 0.00103246 Jy ! Component: 150 - total flux cleaned = 0.00119052 Jy ! Component: 200 - total flux cleaned = 0.00127982 Jy ! Total flux subtracted in 200 components = 0.00127982 Jy ! Clean residual min=-0.001407 max=0.001411 Jy/beam ! Clean residual mean=0.000005 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.0543494 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 99 components and 0.0543494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059685Jy sigma=0.000653 ! Fit after self-cal, rms=0.059673Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000127376 Jy ! Component: 100 - total flux cleaned = 0.00014418 Jy ! Component: 150 - total flux cleaned = 0.000165824 Jy ! Component: 200 - total flux cleaned = 0.000178405 Jy ! Total flux subtracted in 200 components = 0.000178405 Jy ! Clean residual min=-0.001405 max=0.001365 Jy/beam ! Clean residual mean=0.000005 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.0545278 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 105 components and 0.0545278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059673Jy sigma=0.000653 ! Fit after self-cal, rms=0.059671Jy sigma=0.000653 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.534 mas, bmaj=7.933 mas, bpa=-1.722 degrees ! Estimated noise=489.31 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.534 x 7.933 at -1.722 degrees (North through East) ! Clean map min=-0.001457 max=0.04483 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.968 mas, bmaj=7.002 mas, bpa=-1.539 degrees ! Estimated noise=599.996 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0341535 Jy ! Component: 100 - total flux cleaned = 0.0432211 Jy ! Component: 150 - total flux cleaned = 0.0475457 Jy ! Component: 200 - total flux cleaned = 0.0501352 Jy ! Total flux subtracted in 200 components = 0.0501352 Jy ! Clean residual min=-0.001910 max=0.001733 Jy/beam ! Clean residual mean=0.000003 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.0501353 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0501353 Jy ! Inverting map and beam ! Estimated beam: bmin=3.534 mas, bmaj=7.933 mas, bpa=-1.722 degrees ! Estimated noise=489.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00267399 Jy ! Component: 100 - total flux cleaned = 0.00340746 Jy ! Component: 150 - total flux cleaned = 0.00375965 Jy ! Component: 200 - total flux cleaned = 0.00400719 Jy ! Total flux subtracted in 200 components = 0.00400719 Jy ! Clean residual min=-0.001379 max=0.001332 Jy/beam ! Clean residual mean=0.000002 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.0541424 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 48 components and 0.0541424 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.283 mas, bmaj=10.77 mas, bpa=-3.005 degrees ! Estimated noise=585.265 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000811074 Jy ! Component: 100 - total flux cleaned = 0.000847302 Jy ! Component: 150 - total flux cleaned = 0.000821712 Jy ! Component: 200 - total flux cleaned = 0.000775218 Jy ! Total flux subtracted in 200 components = 0.000775218 Jy ! Clean residual min=-0.001495 max=0.001352 Jy/beam ! Clean residual mean=0.000004 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.0549177 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.19414e-05 Jy ! Component: 100 - total flux cleaned = -7.93919e-05 Jy ! Component: 150 - total flux cleaned = -0.000113411 Jy ! Component: 200 - total flux cleaned = -0.000144337 Jy ! Total flux subtracted in 200 components = -0.000144337 Jy ! Clean residual min=-0.001468 max=0.001356 Jy/beam ! Clean residual mean=0.000005 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.0547733 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 91 components and 0.0547733 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.534 mas, bmaj=7.933 mas, bpa=-1.722 degrees ! Estimated noise=489.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000406906 Jy ! Component: 100 - total flux cleaned = 0.000250976 Jy ! Component: 150 - total flux cleaned = 0.000204651 Jy ! Component: 200 - total flux cleaned = 0.000183764 Jy ! Total flux subtracted in 200 components = 0.000183764 Jy ! Clean residual min=-0.001271 max=0.001259 Jy/beam ! Clean residual mean=0.000002 rms=0.000316 Jy/beam ! Combined flux in latest and established models = 0.0549571 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 106 components and 0.0549571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059686Jy sigma=0.000653 ! Fit after self-cal, rms=0.059699Jy sigma=0.000653 wmodel J1235+1233_S_2017_04_28_pus_map.mod ! Writing 106 model components to file: J1235+1233_S_2017_04_28_pus_map.mod wobs J1235+1233_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J1235+1233_S_2017_04_28_pus_uvs.fits wwins J1235+1233_S_2017_04_28_pus_map.win ! wwins: Wrote 2 windows to J1235+1233_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000142572 Jy ! Component: 100 - total flux cleaned = -9.98273e-05 Jy ! Component: 150 - total flux cleaned = -0.000100049 Jy ! Component: 200 - total flux cleaned = -0.000118984 Jy ! Component: 250 - total flux cleaned = -2.27438e-05 Jy ! Component: 300 - total flux cleaned = 3.30347e-05 Jy ! Component: 350 - total flux cleaned = 0.000122948 Jy ! Component: 400 - total flux cleaned = 0.0001579 Jy ! Component: 450 - total flux cleaned = 0.000174753 Jy ! Component: 500 - total flux cleaned = 0.000191374 Jy ! Component: 550 - total flux cleaned = 0.000207745 Jy ! Component: 600 - total flux cleaned = 0.000191461 Jy ! Component: 650 - total flux cleaned = 0.000175627 Jy ! Component: 700 - total flux cleaned = 0.000175552 Jy ! Component: 750 - total flux cleaned = 0.000175385 Jy ! Component: 800 - total flux cleaned = 0.000130242 Jy ! Component: 850 - total flux cleaned = 0.000145024 Jy ! Component: 900 - total flux cleaned = 0.000115753 Jy ! Component: 950 - total flux cleaned = 5.80833e-05 Jy ! Component: 1000 - total flux cleaned = 5.81771e-05 Jy ! Component: 1050 - total flux cleaned = 1.62209e-05 Jy ! Component: 1100 - total flux cleaned = 3.01636e-05 Jy ! Component: 1150 - total flux cleaned = 1.66338e-05 Jy ! Component: 1200 - total flux cleaned = -1.00892e-05 Jy ! Component: 1250 - total flux cleaned = 2.99254e-05 Jy ! Component: 1300 - total flux cleaned = -2.30419e-05 Jy ! Component: 1350 - total flux cleaned = -9.94017e-06 Jy ! Component: 1400 - total flux cleaned = -6.14985e-05 Jy ! Component: 1450 - total flux cleaned = -4.90086e-05 Jy ! Component: 1500 - total flux cleaned = -0.000112038 Jy ! Component: 1550 - total flux cleaned = -9.95881e-05 Jy ! Component: 1600 - total flux cleaned = -8.75024e-05 Jy ! Component: 1650 - total flux cleaned = -0.000123949 Jy ! Component: 1700 - total flux cleaned = -0.000147942 Jy ! Component: 1750 - total flux cleaned = -0.000171637 Jy ! Component: 1800 - total flux cleaned = -0.000195164 Jy ! Component: 1850 - total flux cleaned = -0.000264498 Jy ! Component: 1900 - total flux cleaned = -0.000264453 Jy ! Component: 1950 - total flux cleaned = -0.000320958 Jy ! Component: 2000 - total flux cleaned = -0.00035446 Jy ! Component: 2050 - total flux cleaned = -0.000398727 Jy ! Component: 2100 - total flux cleaned = -0.000420727 Jy ! Component: 2150 - total flux cleaned = -0.000409953 Jy ! Component: 2200 - total flux cleaned = -0.000474578 Jy ! Component: 2250 - total flux cleaned = -0.000527681 Jy ! Component: 2300 - total flux cleaned = -0.000548852 Jy ! Component: 2350 - total flux cleaned = -0.000632288 Jy ! Component: 2400 - total flux cleaned = -0.000621903 Jy ! Component: 2450 - total flux cleaned = -0.000703913 Jy ! Component: 2500 - total flux cleaned = -0.000754512 Jy ! Component: 2550 - total flux cleaned = -0.000724223 Jy ! Component: 2600 - total flux cleaned = -0.000774096 Jy ! Component: 2650 - total flux cleaned = -0.000784004 Jy ! Component: 2700 - total flux cleaned = -0.000793875 Jy ! Component: 2750 - total flux cleaned = -0.00084246 Jy ! Component: 2800 - total flux cleaned = -0.00082313 Jy ! Component: 2850 - total flux cleaned = -0.000851733 Jy ! Component: 2900 - total flux cleaned = -0.000851765 Jy ! Component: 2950 - total flux cleaned = -0.000804742 Jy ! Component: 3000 - total flux cleaned = -0.000842092 Jy ! Component: 3050 - total flux cleaned = -0.000814198 Jy ! Component: 3100 - total flux cleaned = -0.00079584 Jy ! Component: 3150 - total flux cleaned = -0.000759236 Jy ! Component: 3200 - total flux cleaned = -0.000768406 Jy ! Component: 3250 - total flux cleaned = -0.000759346 Jy ! Component: 3300 - total flux cleaned = -0.00075946 Jy ! Component: 3350 - total flux cleaned = -0.000723877 Jy ! Component: 3400 - total flux cleaned = -0.000723886 Jy ! Component: 3450 - total flux cleaned = -0.000723879 Jy ! Component: 3500 - total flux cleaned = -0.000723809 Jy ! Component: 3550 - total flux cleaned = -0.000680478 Jy ! Component: 3600 - total flux cleaned = -0.000654697 Jy ! Component: 3650 - total flux cleaned = -0.000646243 Jy ! Component: 3700 - total flux cleaned = -0.000612328 Jy ! Component: 3750 - total flux cleaned = -0.000578593 Jy ! Component: 3800 - total flux cleaned = -0.000536838 Jy ! Component: 3850 - total flux cleaned = -0.00054526 Jy ! Component: 3900 - total flux cleaned = -0.000512217 Jy ! Component: 3950 - total flux cleaned = -0.000495797 Jy ! Component: 4000 - total flux cleaned = -0.000454883 Jy ! Component: 4050 - total flux cleaned = -0.000471172 Jy ! Total flux subtracted in 4096 components = -0.000463133 Jy ! Clean residual min=-0.000465 max=0.000552 Jy/beam ! Clean residual mean=0.000000 rms=0.000151 Jy/beam ! Combined flux in latest and established models = 0.0544939 Jy keep ! Adding 303 model components to the UV plane model. ! The established model now contains 409 components and 0.0544939 Jy ![Exited script file: muppet] wmap "J1235+1233_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.534 x 7.933 at -1.722 degrees (North through East) ! Clean map min=-0.0011976 max=0.043988 Jy/beam ! Writing clean map to FITS file: J1235+1233_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.043988 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000150354 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.02542 1.02542 2.05084 4.10168 8.20335 16.4067 32.8134 65.6268 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.043 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.534 x 7.933 at -1.722 degrees (North through East) ! Clean map min=-0.0011976 max=0.043988 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1235+1233_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:26:13 2019