! Started logfile: J1234-3408_S_2017_10_09_pus_uvs.log on Sun May 12 13:12:49 2019 obs J1234-3408_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1234-3408_S_2017_10_09_pus_uva.fits ! AN table 1: 115 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.505556 visibilities/baseline/integration-bin. ! Found source: J1234-3408 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 8372 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1234-3408_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 300 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 357 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 285 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 876 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.899051Jy sigma=0.006030 ! Fit after self-cal, rms=0.879793Jy sigma=0.005891 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.756 mas, bmaj=15.82 mas, bpa=-17.55 degrees ! Estimated noise=2236.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0844709 Jy ! Component: 100 - total flux cleaned = 0.112231 Jy ! Total flux subtracted in 100 components = 0.112231 Jy ! Clean residual min=-0.009660 max=0.015101 Jy/beam ! Clean residual mean=-0.000143 rms=0.003284 Jy/beam ! Combined flux in latest and established models = 0.112231 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.112231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119641Jy sigma=0.000712 ! Fit after self-cal, rms=0.119270Jy sigma=0.000711 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.599 mas, bmaj=22.67 mas, bpa=-14.39 degrees ! Estimated noise=1418.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0282754 Jy ! Component: 100 - total flux cleaned = 0.0443407 Jy ! Component: 150 - total flux cleaned = 0.0537226 Jy ! Component: 200 - total flux cleaned = 0.0592609 Jy ! Total flux subtracted in 200 components = 0.0592609 Jy ! Clean residual min=-0.006277 max=0.007101 Jy/beam ! Clean residual mean=-0.000058 rms=0.001764 Jy/beam ! Combined flux in latest and established models = 0.171492 Jy ! Performing phase self-cal ! Adding 64 model components to the UV plane model. ! The established model now contains 80 components and 0.171492 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111489Jy sigma=0.000666 ! Fit after self-cal, rms=0.110904Jy sigma=0.000664 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.91 HN 1.19 KP 1.06 ! LA 1.06 MK 0.96 NL 0.85 OV 1.00* ! PT 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.31 KP 1.03 ! LA 0.94 MK 1.04 NL 1.05 OV 1.00* ! PT 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.99 HN 1.26 KP 0.91 ! LA 0.77 MK 1.07 NL 1.09 OV 1.00* ! PT 0.95 ! ! ! Correcting IF 4. ! A total of 159 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.110904Jy sigma=0.000664 ! Fit after self-cal, rms=0.107655Jy sigma=0.000660 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.724 mas, bmaj=23.11 mas, bpa=-14.49 degrees ! Estimated noise=1458.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00126228 Jy ! Component: 100 - total flux cleaned = -0.00132095 Jy ! Component: 150 - total flux cleaned = -0.00137229 Jy ! Component: 200 - total flux cleaned = -0.00141719 Jy ! Total flux subtracted in 200 components = -0.00141719 Jy ! Clean residual min=-0.003933 max=0.004569 Jy/beam ! Clean residual mean=0.000009 rms=0.001262 Jy/beam ! Combined flux in latest and established models = 0.170075 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 92 components and 0.170075 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107592Jy sigma=0.000659 ! Fit after self-cal, rms=0.107492Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107492Jy sigma=0.000659 ! Fit after self-cal, rms=0.108959Jy sigma=0.000657 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.736 mas, bmaj=23.11 mas, bpa=-14.53 degrees ! Estimated noise=1461.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00033181 Jy ! Component: 100 - total flux cleaned = -0.000382066 Jy ! Component: 150 - total flux cleaned = -0.000423758 Jy ! Component: 200 - total flux cleaned = -0.000425406 Jy ! Total flux subtracted in 200 components = -0.000425406 Jy ! Clean residual min=-0.003815 max=0.004091 Jy/beam ! Clean residual mean=-0.000003 rms=0.001122 Jy/beam ! Combined flux in latest and established models = 0.16965 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 112 components and 0.16965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108918Jy sigma=0.000657 ! Fit after self-cal, rms=0.108964Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.2839e-05 Jy ! Component: 100 - total flux cleaned = -6.62708e-05 Jy ! Component: 150 - total flux cleaned = -9.68333e-05 Jy ! Component: 200 - total flux cleaned = -9.63044e-05 Jy ! Total flux subtracted in 200 components = -9.63044e-05 Jy ! Clean residual min=-0.003749 max=0.003973 Jy/beam ! Clean residual mean=-0.000002 rms=0.001117 Jy/beam ! Combined flux in latest and established models = 0.169553 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 117 components and 0.169553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108946Jy sigma=0.000657 ! Fit after self-cal, rms=0.108942Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108942Jy sigma=0.000657 ! Fit after self-cal, rms=0.109809Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.742 mas, bmaj=23.24 mas, bpa=-14.56 degrees ! Estimated noise=1469.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000401642 Jy ! Component: 100 - total flux cleaned = -0.000402666 Jy ! Component: 150 - total flux cleaned = -0.000439032 Jy ! Component: 200 - total flux cleaned = -0.000438357 Jy ! Total flux subtracted in 200 components = -0.000438357 Jy ! Clean residual min=-0.003841 max=0.003992 Jy/beam ! Clean residual mean=-0.000004 rms=0.001097 Jy/beam ! Combined flux in latest and established models = 0.169115 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 120 components and 0.169115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109780Jy sigma=0.000656 ! Fit after self-cal, rms=0.109783Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.74448e-05 Jy ! Component: 100 - total flux cleaned = -3.73978e-05 Jy ! Component: 150 - total flux cleaned = -3.784e-05 Jy ! Component: 200 - total flux cleaned = -6.1727e-05 Jy ! Total flux subtracted in 200 components = -6.1727e-05 Jy ! Clean residual min=-0.003807 max=0.003941 Jy/beam ! Clean residual mean=-0.000004 rms=0.001096 Jy/beam ! Combined flux in latest and established models = 0.169053 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 123 components and 0.169053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109769Jy sigma=0.000656 ! Fit after self-cal, rms=0.109765Jy sigma=0.000656 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109765Jy sigma=0.000656 ! Fit after self-cal, rms=0.110384Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.711 mas, bmaj=31.06 mas, bpa=-7.253 degrees ! Estimated noise=1731.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000614243 Jy ! Component: 100 - total flux cleaned = -0.000697069 Jy ! Component: 150 - total flux cleaned = -0.000744782 Jy ! Component: 200 - total flux cleaned = -0.000766218 Jy ! Total flux subtracted in 200 components = -0.000766218 Jy ! Clean residual min=-0.003982 max=0.004273 Jy/beam ! Clean residual mean=-0.000003 rms=0.001371 Jy/beam ! Combined flux in latest and established models = 0.168287 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 134 components and 0.168287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110370Jy sigma=0.000656 ! Fit after self-cal, rms=0.110367Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.70034e-05 Jy ! Component: 100 - total flux cleaned = -9.50848e-05 Jy ! Component: 150 - total flux cleaned = -0.000112705 Jy ! Component: 200 - total flux cleaned = -0.000129797 Jy ! Total flux subtracted in 200 components = -0.000129797 Jy ! Clean residual min=-0.003976 max=0.004249 Jy/beam ! Clean residual mean=-0.000003 rms=0.001369 Jy/beam ! Combined flux in latest and established models = 0.168157 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 138 components and 0.168157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110361Jy sigma=0.000656 ! Fit after self-cal, rms=0.110354Jy sigma=0.000656 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.745 mas, bmaj=23.36 mas, bpa=-14.59 degrees ! Estimated noise=1475.91 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.745 x 23.36 at -14.59 degrees (North through East) ! Clean map min=-0.0038133 max=0.11163 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.825 mas, bmaj=16.07 mas, bpa=-17.68 degrees ! Estimated noise=2375.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0880691 Jy ! Component: 100 - total flux cleaned = 0.115392 Jy ! Component: 150 - total flux cleaned = 0.131221 Jy ! Component: 200 - total flux cleaned = 0.142025 Jy ! Total flux subtracted in 200 components = 0.142025 Jy ! Clean residual min=-0.006081 max=0.007093 Jy/beam ! Clean residual mean=-0.000056 rms=0.001691 Jy/beam ! Combined flux in latest and established models = 0.142025 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 41 model components to the UV plane model. ! The established model now contains 41 components and 0.142025 Jy ! Inverting map and beam ! Estimated beam: bmin=3.745 mas, bmaj=23.36 mas, bpa=-14.59 degrees ! Estimated noise=1475.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114039 Jy ! Component: 100 - total flux cleaned = 0.0175453 Jy ! Component: 150 - total flux cleaned = 0.0212498 Jy ! Component: 200 - total flux cleaned = 0.0235371 Jy ! Total flux subtracted in 200 components = 0.0235371 Jy ! Clean residual min=-0.004198 max=0.004178 Jy/beam ! Clean residual mean=-0.000014 rms=0.001119 Jy/beam ! Combined flux in latest and established models = 0.165563 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 78 components and 0.165563 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.711 mas, bmaj=31.06 mas, bpa=-7.253 degrees ! Estimated noise=1731.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00136124 Jy ! Component: 100 - total flux cleaned = 0.00193381 Jy ! Component: 150 - total flux cleaned = 0.0020188 Jy ! Component: 200 - total flux cleaned = 0.00209306 Jy ! Total flux subtracted in 200 components = 0.00209306 Jy ! Clean residual min=-0.004059 max=0.004246 Jy/beam ! Clean residual mean=-0.000005 rms=0.001368 Jy/beam ! Combined flux in latest and established models = 0.167656 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.24128e-05 Jy ! Component: 100 - total flux cleaned = 9.9248e-05 Jy ! Component: 150 - total flux cleaned = 0.000130955 Jy ! Component: 200 - total flux cleaned = 0.000151296 Jy ! Total flux subtracted in 200 components = 0.000151296 Jy ! Clean residual min=-0.004068 max=0.004239 Jy/beam ! Clean residual mean=-0.000004 rms=0.001366 Jy/beam ! Combined flux in latest and established models = 0.167807 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 101 components and 0.167807 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.745 mas, bmaj=23.36 mas, bpa=-14.59 degrees ! Estimated noise=1475.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000187262 Jy ! Component: 100 - total flux cleaned = 0.000189161 Jy ! Component: 150 - total flux cleaned = 0.000214541 Jy ! Component: 200 - total flux cleaned = 0.00021538 Jy ! Total flux subtracted in 200 components = 0.00021538 Jy ! Clean residual min=-0.003927 max=0.003864 Jy/beam ! Clean residual mean=-0.000003 rms=0.001090 Jy/beam ! Combined flux in latest and established models = 0.168022 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 108 components and 0.168022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110352Jy sigma=0.000656 ! Fit after self-cal, rms=0.110333Jy sigma=0.000656 wmodel J1234-3408_S_2017_10_09_pus_map.mod ! Writing 108 model components to file: J1234-3408_S_2017_10_09_pus_map.mod wobs J1234-3408_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1234-3408_S_2017_10_09_pus_uvs.fits wwins J1234-3408_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J1234-3408_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000567652 Jy ! Component: 100 - total flux cleaned = 0.00107974 Jy ! Component: 150 - total flux cleaned = 0.00130817 Jy ! Component: 200 - total flux cleaned = 0.00152584 Jy ! Component: 250 - total flux cleaned = 0.00157438 Jy ! Component: 300 - total flux cleaned = 0.00176374 Jy ! Component: 350 - total flux cleaned = 0.00189825 Jy ! Component: 400 - total flux cleaned = 0.00215966 Jy ! Component: 450 - total flux cleaned = 0.00245254 Jy ! Component: 500 - total flux cleaned = 0.00269242 Jy ! Component: 550 - total flux cleaned = 0.00296141 Jy ! Component: 600 - total flux cleaned = 0.00322116 Jy ! Component: 650 - total flux cleaned = 0.0034001 Jy ! Component: 700 - total flux cleaned = 0.00357366 Jy ! Component: 750 - total flux cleaned = 0.00367342 Jy ! Component: 800 - total flux cleaned = 0.00376958 Jy ! Component: 850 - total flux cleaned = 0.0040202 Jy ! Component: 900 - total flux cleaned = 0.00420375 Jy ! Component: 950 - total flux cleaned = 0.00441329 Jy ! Component: 1000 - total flux cleaned = 0.00458882 Jy ! Component: 1050 - total flux cleaned = 0.00473207 Jy ! Component: 1100 - total flux cleaned = 0.00484369 Jy ! Component: 1150 - total flux cleaned = 0.00498055 Jy ! Component: 1200 - total flux cleaned = 0.00506068 Jy ! Component: 1250 - total flux cleaned = 0.00511284 Jy ! Component: 1300 - total flux cleaned = 0.0052408 Jy ! Component: 1350 - total flux cleaned = 0.00526571 Jy ! Component: 1400 - total flux cleaned = 0.00531521 Jy ! Component: 1450 - total flux cleaned = 0.00541158 Jy ! Component: 1500 - total flux cleaned = 0.0054826 Jy ! Component: 1550 - total flux cleaned = 0.00555223 Jy ! Component: 1600 - total flux cleaned = 0.00568822 Jy ! Component: 1650 - total flux cleaned = 0.0057323 Jy ! Component: 1700 - total flux cleaned = 0.00568851 Jy ! Component: 1750 - total flux cleaned = 0.00568864 Jy ! Component: 1800 - total flux cleaned = 0.00568925 Jy ! Component: 1850 - total flux cleaned = 0.00560644 Jy ! Component: 1900 - total flux cleaned = 0.00558658 Jy ! Component: 1950 - total flux cleaned = 0.00550731 Jy ! Component: 2000 - total flux cleaned = 0.00554689 Jy ! Component: 2050 - total flux cleaned = 0.00544997 Jy ! Component: 2100 - total flux cleaned = 0.00537357 Jy ! Component: 2150 - total flux cleaned = 0.00528002 Jy ! Component: 2200 - total flux cleaned = 0.00522452 Jy ! Component: 2250 - total flux cleaned = 0.00518797 Jy ! Component: 2300 - total flux cleaned = 0.00518805 Jy ! Component: 2350 - total flux cleaned = 0.00513439 Jy ! Component: 2400 - total flux cleaned = 0.00515208 Jy ! Component: 2450 - total flux cleaned = 0.00516945 Jy ! Component: 2500 - total flux cleaned = 0.00515202 Jy ! Component: 2550 - total flux cleaned = 0.00518612 Jy ! Component: 2600 - total flux cleaned = 0.00508428 Jy ! Component: 2650 - total flux cleaned = 0.00511793 Jy ! Component: 2700 - total flux cleaned = 0.00510117 Jy ! Component: 2750 - total flux cleaned = 0.00508458 Jy ! Component: 2800 - total flux cleaned = 0.00506827 Jy ! Component: 2850 - total flux cleaned = 0.00506825 Jy ! Component: 2900 - total flux cleaned = 0.00503589 Jy ! Component: 2950 - total flux cleaned = 0.005036 Jy ! Component: 3000 - total flux cleaned = 0.00506794 Jy ! Component: 3050 - total flux cleaned = 0.00508374 Jy ! Component: 3100 - total flux cleaned = 0.00508363 Jy ! Component: 3150 - total flux cleaned = 0.00506801 Jy ! Component: 3200 - total flux cleaned = 0.00506825 Jy ! Component: 3250 - total flux cleaned = 0.00509944 Jy ! Component: 3300 - total flux cleaned = 0.00508386 Jy ! Component: 3350 - total flux cleaned = 0.00502193 Jy ! Component: 3400 - total flux cleaned = 0.00494455 Jy ! Component: 3450 - total flux cleaned = 0.00489824 Jy ! Component: 3500 - total flux cleaned = 0.00480558 Jy ! Component: 3550 - total flux cleaned = 0.00475927 Jy ! Component: 3600 - total flux cleaned = 0.00469759 Jy ! Component: 3650 - total flux cleaned = 0.00460507 Jy ! Component: 3700 - total flux cleaned = 0.00454342 Jy ! Component: 3750 - total flux cleaned = 0.00448186 Jy ! Component: 3800 - total flux cleaned = 0.00443566 Jy ! Component: 3850 - total flux cleaned = 0.00434321 Jy ! Component: 3900 - total flux cleaned = 0.00428159 Jy ! Component: 3950 - total flux cleaned = 0.00421986 Jy ! Component: 4000 - total flux cleaned = 0.00414258 Jy ! Component: 4050 - total flux cleaned = 0.00408074 Jy ! Total flux subtracted in 4096 components = 0.00398778 Jy ! Clean residual min=-0.000872 max=0.001038 Jy/beam ! Clean residual mean=-0.000002 rms=0.000295 Jy/beam ! Combined flux in latest and established models = 0.17201 Jy keep ! Adding 257 model components to the UV plane model. ! The established model now contains 365 components and 0.17201 Jy ![Exited script file: muppet] wmap "J1234-3408_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.745 x 23.36 at -14.59 degrees (North through East) ! Clean map min=-0.0037669 max=0.11208 Jy/beam ! Writing clean map to FITS file: J1234-3408_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.112076 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000307519 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.823153 0.823153 1.64631 3.29261 6.58522 13.1704 26.3409 52.6818 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.112 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.745 x 23.36 at -14.59 degrees (North through East) ! Clean map min=-0.0037669 max=0.11208 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1234-3408_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:12:54 2019