! Started logfile: J1233+8054_S_2017_06_10_pus_uvs.log on Mon May 6 14:52:58 2019 obs J1233+8054_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J1233+8054_S_2017_06_10_pus_uva.fits ! AN table 1: 112 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.964484 visibilities/baseline/integration-bin. ! Found source: J1233+8054 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 19444 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1233+8054_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 640 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.891250Jy sigma=0.007726 ! Fit after self-cal, rms=0.881560Jy sigma=0.007645 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.003 mas, bmaj=4.261 mas, bpa=43.52 degrees ! Estimated noise=973.912 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0901546 Jy ! Component: 100 - total flux cleaned = 0.114329 Jy ! Total flux subtracted in 100 components = 0.114329 Jy ! Clean residual min=-0.006915 max=0.038604 Jy/beam ! Clean residual mean=-0.000097 rms=0.002326 Jy/beam ! Combined flux in latest and established models = 0.114329 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.114329 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099004Jy sigma=0.000835 ! Fit after self-cal, rms=0.098997Jy sigma=0.000835 ! Inverting map ! Added new window around map position (5.5, -6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0312202 Jy ! Component: 100 - total flux cleaned = 0.0454932 Jy ! Total flux subtracted in 100 components = 0.0454932 Jy ! Clean residual min=-0.005097 max=0.011266 Jy/beam ! Clean residual mean=-0.000047 rms=0.001333 Jy/beam ! Combined flux in latest and established models = 0.159823 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 32 components and 0.159823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087419Jy sigma=0.000731 ! Fit after self-cal, rms=0.086067Jy sigma=0.000718 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124999 Jy ! Component: 100 - total flux cleaned = 0.0197597 Jy ! Total flux subtracted in 100 components = 0.0197597 Jy ! Clean residual min=-0.003919 max=0.004351 Jy/beam ! Clean residual mean=-0.000026 rms=0.000932 Jy/beam ! Combined flux in latest and established models = 0.179582 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 44 components and 0.179582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083721Jy sigma=0.000698 ! Fit after self-cal, rms=0.083570Jy sigma=0.000697 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00601633 Jy ! Component: 100 - total flux cleaned = 0.0100607 Jy ! Total flux subtracted in 100 components = 0.0100607 Jy ! Clean residual min=-0.003507 max=0.003593 Jy/beam ! Clean residual mean=-0.000015 rms=0.000830 Jy/beam ! Combined flux in latest and established models = 0.189643 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 52 components and 0.189643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082969Jy sigma=0.000692 ! Fit after self-cal, rms=0.082947Jy sigma=0.000692 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.613 mas, bmaj=4.976 mas, bpa=42.28 degrees ! Estimated noise=665.556 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10.5, -9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00499866 Jy ! Component: 100 - total flux cleaned = 0.00814669 Jy ! Component: 150 - total flux cleaned = 0.00996447 Jy ! Component: 200 - total flux cleaned = 0.0109975 Jy ! Total flux subtracted in 200 components = 0.0109975 Jy ! Clean residual min=-0.002721 max=0.002960 Jy/beam ! Clean residual mean=-0.000021 rms=0.000692 Jy/beam ! Combined flux in latest and established models = 0.200641 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 68 components and 0.200641 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082582Jy sigma=0.000689 ! Fit after self-cal, rms=0.082540Jy sigma=0.000688 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.96 HN 1.01 KP 1.03 ! LA 1.00 MK 1.03 NL 0.90 OV 0.99 ! PT 1.01 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.03 HN 0.99 KP 0.99 ! LA 0.96 MK 1.07 NL 1.05 OV 1.09 ! PT 0.97 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.03 HN 1.00 KP 0.99 ! LA 0.98 MK 1.08 NL 1.00 OV 0.96 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 1.01 KP 1.00* ! LA 1.08 MK 0.96 NL 1.00* OV 1.00* ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.082540Jy sigma=0.000688 ! Fit after self-cal, rms=0.082366Jy sigma=0.000685 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.652 mas, bmaj=5.024 mas, bpa=42.09 degrees ! Estimated noise=666.342 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00156953 Jy ! Component: 100 - total flux cleaned = 0.00199222 Jy ! Component: 150 - total flux cleaned = 0.00233513 Jy ! Component: 200 - total flux cleaned = 0.00261262 Jy ! Total flux subtracted in 200 components = 0.00261262 Jy ! Clean residual min=-0.002411 max=0.002618 Jy/beam ! Clean residual mean=-0.000011 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.203253 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 89 components and 0.203253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082294Jy sigma=0.000684 ! Fit after self-cal, rms=0.082287Jy sigma=0.000684 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082287Jy sigma=0.000684 ! Fit after self-cal, rms=0.081520Jy sigma=0.000679 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.648 mas, bmaj=5.012 mas, bpa=41.08 degrees ! Estimated noise=667.052 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000665853 Jy ! Component: 100 - total flux cleaned = 0.001058 Jy ! Component: 150 - total flux cleaned = 0.00123883 Jy ! Component: 200 - total flux cleaned = 0.00142459 Jy ! Total flux subtracted in 200 components = 0.00142459 Jy ! Clean residual min=-0.002018 max=0.002468 Jy/beam ! Clean residual mean=-0.000006 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.204678 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 105 components and 0.204678 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081495Jy sigma=0.000678 ! Fit after self-cal, rms=0.081497Jy sigma=0.000678 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (24, -20). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00269454 Jy ! Component: 100 - total flux cleaned = 0.00432146 Jy ! Component: 150 - total flux cleaned = 0.00533182 Jy ! Component: 200 - total flux cleaned = 0.0056604 Jy ! Total flux subtracted in 200 components = 0.0056604 Jy ! Clean residual min=-0.001779 max=0.002011 Jy/beam ! Clean residual mean=0.000000 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.210338 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 139 components and 0.210338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081398Jy sigma=0.000677 ! Fit after self-cal, rms=0.081388Jy sigma=0.000677 ! Inverting map ! Added new window around map position (-118.5, 94.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015432 Jy ! Component: 100 - total flux cleaned = 0.00198623 Jy ! Component: 150 - total flux cleaned = 0.00246372 Jy ! Component: 200 - total flux cleaned = 0.00278635 Jy ! Total flux subtracted in 200 components = 0.00278635 Jy ! Clean residual min=-0.001737 max=0.001469 Jy/beam ! Clean residual mean=-0.000001 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.213125 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 155 components and 0.213125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081336Jy sigma=0.000677 ! Fit after self-cal, rms=0.081333Jy sigma=0.000677 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081333Jy sigma=0.000677 ! Fit after self-cal, rms=0.081371Jy sigma=0.000677 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.655 mas, bmaj=5.018 mas, bpa=41.04 degrees ! Estimated noise=667.147 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000940851 Jy ! Component: 100 - total flux cleaned = 0.00133371 Jy ! Component: 150 - total flux cleaned = 0.00168203 Jy ! Component: 200 - total flux cleaned = 0.00194461 Jy ! Total flux subtracted in 200 components = 0.00194461 Jy ! Clean residual min=-0.001706 max=0.001465 Jy/beam ! Clean residual mean=-0.000004 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 0.215069 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 167 components and 0.215069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081349Jy sigma=0.000676 ! Fit after self-cal, rms=0.081349Jy sigma=0.000676 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000323086 Jy ! Component: 100 - total flux cleaned = 0.000514427 Jy ! Component: 150 - total flux cleaned = 0.000581704 Jy ! Component: 200 - total flux cleaned = 0.000624048 Jy ! Total flux subtracted in 200 components = 0.000624048 Jy ! Clean residual min=-0.001695 max=0.001445 Jy/beam ! Clean residual mean=-0.000003 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.215693 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 177 components and 0.215693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081337Jy sigma=0.000676 ! Fit after self-cal, rms=0.081336Jy sigma=0.000676 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081336Jy sigma=0.000676 ! Fit after self-cal, rms=0.081416Jy sigma=0.000676 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.171 mas, bmaj=9.908 mas, bpa=35.72 degrees ! Estimated noise=847.623 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000816214 Jy ! Component: 100 - total flux cleaned = 0.0010681 Jy ! Component: 150 - total flux cleaned = 0.00115148 Jy ! Component: 200 - total flux cleaned = 0.0011374 Jy ! Total flux subtracted in 200 components = 0.0011374 Jy ! Clean residual min=-0.001872 max=0.001520 Jy/beam ! Clean residual mean=-0.000008 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.216831 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 203 components and 0.216831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081413Jy sigma=0.000676 ! Fit after self-cal, rms=0.081413Jy sigma=0.000676 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000178426 Jy ! Component: 100 - total flux cleaned = 0.000192667 Jy ! Component: 150 - total flux cleaned = 0.000180212 Jy ! Component: 200 - total flux cleaned = 0.00016895 Jy ! Total flux subtracted in 200 components = 0.00016895 Jy ! Clean residual min=-0.001861 max=0.001550 Jy/beam ! Clean residual mean=-0.000007 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.217 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 216 components and 0.217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081413Jy sigma=0.000676 ! Fit after self-cal, rms=0.081413Jy sigma=0.000676 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.656 mas, bmaj=5.021 mas, bpa=40.99 degrees ! Estimated noise=667.664 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.656 x 5.021 at 40.99 degrees (North through East) ! Clean map min=-0.0015924 max=0.11347 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.043 mas, bmaj=4.311 mas, bpa=42.14 degrees ! Estimated noise=976.361 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0930936 Jy ! Component: 100 - total flux cleaned = 0.130976 Jy ! Component: 150 - total flux cleaned = 0.151082 Jy ! Component: 200 - total flux cleaned = 0.164351 Jy ! Total flux subtracted in 200 components = 0.164351 Jy ! Clean residual min=-0.003443 max=0.007344 Jy/beam ! Clean residual mean=-0.000044 rms=0.000977 Jy/beam ! Combined flux in latest and established models = 0.164351 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.164351 Jy ! Inverting map and beam ! Estimated beam: bmin=3.656 mas, bmaj=5.021 mas, bpa=40.99 degrees ! Estimated noise=667.664 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0125822 Jy ! Component: 100 - total flux cleaned = 0.0206809 Jy ! Component: 150 - total flux cleaned = 0.026536 Jy ! Component: 200 - total flux cleaned = 0.0310331 Jy ! Total flux subtracted in 200 components = 0.0310331 Jy ! Clean residual min=-0.002009 max=0.002684 Jy/beam ! Clean residual mean=-0.000032 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.195384 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 59 components and 0.195384 Jy ! Inverting map ! Added new window around map position (17.5, -13.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00357154 Jy ! Component: 100 - total flux cleaned = 0.00648713 Jy ! Component: 150 - total flux cleaned = 0.00895067 Jy ! Component: 200 - total flux cleaned = 0.0110734 Jy ! Total flux subtracted in 200 components = 0.0110734 Jy ! Clean residual min=-0.001846 max=0.001652 Jy/beam ! Clean residual mean=-0.000016 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.206458 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 94 components and 0.206458 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.171 mas, bmaj=9.908 mas, bpa=35.72 degrees ! Estimated noise=847.623 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00299192 Jy ! Component: 100 - total flux cleaned = 0.00503461 Jy ! Component: 150 - total flux cleaned = 0.00655179 Jy ! Component: 200 - total flux cleaned = 0.00753397 Jy ! Total flux subtracted in 200 components = 0.00753397 Jy ! Clean residual min=-0.001975 max=0.001598 Jy/beam ! Clean residual mean=-0.000016 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.213992 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000626808 Jy ! Component: 100 - total flux cleaned = 0.001109 Jy ! Component: 150 - total flux cleaned = 0.00151118 Jy ! Component: 200 - total flux cleaned = 0.00182952 Jy ! Total flux subtracted in 200 components = 0.00182952 Jy ! Clean residual min=-0.001959 max=0.001642 Jy/beam ! Clean residual mean=-0.000011 rms=0.000512 Jy/beam ! Combined flux in latest and established models = 0.215821 Jy ! Adding 134 model components to the UV plane model. ! The established model now contains 213 components and 0.215821 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.656 mas, bmaj=5.021 mas, bpa=40.99 degrees ! Estimated noise=667.664 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000100675 Jy ! Component: 100 - total flux cleaned = -1.75472e-05 Jy ! Component: 150 - total flux cleaned = 0.000124967 Jy ! Component: 200 - total flux cleaned = 0.000251544 Jy ! Total flux subtracted in 200 components = 0.000251544 Jy ! Clean residual min=-0.001701 max=0.001505 Jy/beam ! Clean residual mean=-0.000004 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.216073 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 236 components and 0.216073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081426Jy sigma=0.000676 ! Fit after self-cal, rms=0.081411Jy sigma=0.000676 wmodel J1233+8054_S_2017_06_10_pus_map.mod ! Writing 236 model components to file: J1233+8054_S_2017_06_10_pus_map.mod wobs J1233+8054_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J1233+8054_S_2017_06_10_pus_uvs.fits wwins J1233+8054_S_2017_06_10_pus_map.win ! wwins: Wrote 6 windows to J1233+8054_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00076646 Jy ! Component: 100 - total flux cleaned = -0.00136171 Jy ! Component: 150 - total flux cleaned = -0.00171276 Jy ! Component: 200 - total flux cleaned = -0.00184332 Jy ! Component: 250 - total flux cleaned = -0.00199613 Jy ! Component: 300 - total flux cleaned = -0.00217016 Jy ! Component: 350 - total flux cleaned = -0.0022678 Jy ! Component: 400 - total flux cleaned = -0.00236364 Jy ! Component: 450 - total flux cleaned = -0.00243413 Jy ! Component: 500 - total flux cleaned = -0.00248007 Jy ! Component: 550 - total flux cleaned = -0.00254817 Jy ! Component: 600 - total flux cleaned = -0.00263805 Jy ! Component: 650 - total flux cleaned = -0.00272654 Jy ! Component: 700 - total flux cleaned = -0.00277073 Jy ! Component: 750 - total flux cleaned = -0.00283532 Jy ! Component: 800 - total flux cleaned = -0.00287761 Jy ! Component: 850 - total flux cleaned = -0.00289852 Jy ! Component: 900 - total flux cleaned = -0.00298161 Jy ! Component: 950 - total flux cleaned = -0.00308377 Jy ! Component: 1000 - total flux cleaned = -0.00308383 Jy ! Component: 1050 - total flux cleaned = -0.00314403 Jy ! Component: 1100 - total flux cleaned = -0.00312445 Jy ! Component: 1150 - total flux cleaned = -0.00326205 Jy ! Component: 1200 - total flux cleaned = -0.00326225 Jy ! Component: 1250 - total flux cleaned = -0.00332037 Jy ! Component: 1300 - total flux cleaned = -0.00337727 Jy ! Component: 1350 - total flux cleaned = -0.00347181 Jy ! Component: 1400 - total flux cleaned = -0.00347166 Jy ! Component: 1450 - total flux cleaned = -0.00347181 Jy ! Component: 1500 - total flux cleaned = -0.00347205 Jy ! Component: 1550 - total flux cleaned = -0.00358115 Jy ! Component: 1600 - total flux cleaned = -0.00354522 Jy ! Component: 1650 - total flux cleaned = -0.00358119 Jy ! Component: 1700 - total flux cleaned = -0.00359903 Jy ! Component: 1750 - total flux cleaned = -0.00359886 Jy ! Component: 1800 - total flux cleaned = -0.00359907 Jy ! Component: 1850 - total flux cleaned = -0.00356463 Jy ! Component: 1900 - total flux cleaned = -0.00368486 Jy ! Component: 1950 - total flux cleaned = -0.00358254 Jy ! Component: 2000 - total flux cleaned = -0.00363341 Jy ! Component: 2050 - total flux cleaned = -0.00366689 Jy ! Component: 2100 - total flux cleaned = -0.00366682 Jy ! Component: 2150 - total flux cleaned = -0.0036504 Jy ! Component: 2200 - total flux cleaned = -0.0035516 Jy ! Component: 2250 - total flux cleaned = -0.00356788 Jy ! Component: 2300 - total flux cleaned = -0.00353532 Jy ! Component: 2350 - total flux cleaned = -0.00345486 Jy ! Component: 2400 - total flux cleaned = -0.00340668 Jy ! Component: 2450 - total flux cleaned = -0.00339103 Jy ! Component: 2500 - total flux cleaned = -0.00335935 Jy ! Component: 2550 - total flux cleaned = -0.00332801 Jy ! Component: 2600 - total flux cleaned = -0.00323459 Jy ! Component: 2650 - total flux cleaned = -0.00318811 Jy ! Component: 2700 - total flux cleaned = -0.00318811 Jy ! Component: 2750 - total flux cleaned = -0.00309647 Jy ! Component: 2800 - total flux cleaned = -0.00306606 Jy ! Component: 2850 - total flux cleaned = -0.00297582 Jy ! Component: 2900 - total flux cleaned = -0.00302068 Jy ! Component: 2950 - total flux cleaned = -0.00293135 Jy ! Component: 3000 - total flux cleaned = -0.00291663 Jy ! Component: 3050 - total flux cleaned = -0.00285755 Jy ! Component: 3100 - total flux cleaned = -0.00281357 Jy ! Component: 3150 - total flux cleaned = -0.00276994 Jy ! Component: 3200 - total flux cleaned = -0.00266848 Jy ! Component: 3250 - total flux cleaned = -0.00262538 Jy ! Component: 3300 - total flux cleaned = -0.00259674 Jy ! Component: 3350 - total flux cleaned = -0.00258254 Jy ! Component: 3400 - total flux cleaned = -0.00255442 Jy ! Component: 3450 - total flux cleaned = -0.00252615 Jy ! Component: 3500 - total flux cleaned = -0.00245607 Jy ! Component: 3550 - total flux cleaned = -0.00241426 Jy ! Component: 3600 - total flux cleaned = -0.00234499 Jy ! Component: 3650 - total flux cleaned = -0.00231752 Jy ! Component: 3700 - total flux cleaned = -0.00226279 Jy ! Component: 3750 - total flux cleaned = -0.00222181 Jy ! Component: 3800 - total flux cleaned = -0.00218127 Jy ! Component: 3850 - total flux cleaned = -0.00220814 Jy ! Component: 3900 - total flux cleaned = -0.00211439 Jy ! Component: 3950 - total flux cleaned = -0.00206106 Jy ! Component: 4000 - total flux cleaned = -0.00202133 Jy ! Component: 4050 - total flux cleaned = -0.00195555 Jy ! Total flux subtracted in 4096 components = -0.00196877 Jy ! Clean residual min=-0.000721 max=0.000807 Jy/beam ! Clean residual mean=-0.000000 rms=0.000241 Jy/beam ! Combined flux in latest and established models = 0.214104 Jy keep ! Adding 301 model components to the UV plane model. ! The established model now contains 537 components and 0.214104 Jy ![Exited script file: muppet] wmap "J1233+8054_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.656 x 5.021 at 40.99 degrees (North through East) ! Clean map min=-0.0013194 max=0.11339 Jy/beam ! Writing clean map to FITS file: J1233+8054_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.113386 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000239618 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.633986 0.633986 1.26797 2.53595 5.07189 10.1438 20.2876 40.5751 81.1502 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.113 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.656 x 5.021 at 40.99 degrees (North through East) ! Clean map min=-0.0013194 max=0.11339 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1233+8054_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:53:03 2019