! Started logfile: J1232-1836_S_2017_10_09_pus_uvs.log on Sun May 12 13:12:43 2019 obs J1232-1836_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1232-1836_S_2017_10_09_pus_uva.fits ! AN table 1: 115 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.640821 visibilities/baseline/integration-bin. ! Found source: J1232-1836 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 10612 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1232-1836_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 231 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 335 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 276 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 696 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.002294Jy sigma=0.007685 ! Fit after self-cal, rms=0.946592Jy sigma=0.007271 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.596 mas, bmaj=12.17 mas, bpa=-19.74 degrees ! Estimated noise=1695.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0425247 Jy ! Component: 100 - total flux cleaned = 0.0519098 Jy ! Total flux subtracted in 100 components = 0.0519098 Jy ! Clean residual min=-0.005253 max=0.004814 Jy/beam ! Clean residual mean=-0.000013 rms=0.001261 Jy/beam ! Combined flux in latest and established models = 0.0519098 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0519098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093072Jy sigma=0.000648 ! Fit after self-cal, rms=0.091803Jy sigma=0.000638 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.459 mas, bmaj=14.03 mas, bpa=-17.22 degrees ! Estimated noise=1101.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00601831 Jy ! Component: 100 - total flux cleaned = 0.00868385 Jy ! Component: 150 - total flux cleaned = 0.00983964 Jy ! Component: 200 - total flux cleaned = 0.0101162 Jy ! Total flux subtracted in 200 components = 0.0101162 Jy ! Clean residual min=-0.003493 max=0.003320 Jy/beam ! Clean residual mean=-0.000009 rms=0.000903 Jy/beam ! Combined flux in latest and established models = 0.062026 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.062026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091337Jy sigma=0.000635 ! Fit after self-cal, rms=0.091216Jy sigma=0.000635 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.05 HN 1.09 KP 1.01 ! LA 0.93 MK 1.07 NL 0.99 OV 1.00* ! PT 1.08 ! ! ! Correcting IF 2. ! A total of 42 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.14 HN 0.93 KP 0.97 ! LA 0.90 MK 1.11 NL 1.09 OV 1.00* ! PT 1.00 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 0.98 KP 0.87 ! LA 0.77 MK 1.19 NL 1.01 OV 1.00* ! PT 1.03 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.13 HN 0.68 KP 1.00* ! LA 0.90 MK 0.76 NL 1.00* OV 1.00* ! PT 1.02 ! ! ! Fit before self-cal, rms=0.091216Jy sigma=0.000635 ! Fit after self-cal, rms=0.088657Jy sigma=0.000633 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.452 mas, bmaj=14.32 mas, bpa=-17.1 degrees ! Estimated noise=1103.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000454229 Jy ! Component: 100 - total flux cleaned = 0.000486407 Jy ! Component: 150 - total flux cleaned = 0.000464222 Jy ! Component: 200 - total flux cleaned = 0.000422435 Jy ! Total flux subtracted in 200 components = 0.000422435 Jy ! Clean residual min=-0.002515 max=0.002848 Jy/beam ! Clean residual mean=-0.000004 rms=0.000720 Jy/beam ! Combined flux in latest and established models = 0.0624484 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 46 components and 0.0624484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088638Jy sigma=0.000632 ! Fit after self-cal, rms=0.088557Jy sigma=0.000631 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088557Jy sigma=0.000631 ! Fit after self-cal, rms=0.087417Jy sigma=0.000630 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.46 mas, bmaj=14.31 mas, bpa=-16.96 degrees ! Estimated noise=1098.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000598043 Jy ! Component: 100 - total flux cleaned = -0.000709414 Jy ! Component: 150 - total flux cleaned = -0.000743955 Jy ! Component: 200 - total flux cleaned = -0.000787514 Jy ! Total flux subtracted in 200 components = -0.000787514 Jy ! Clean residual min=-0.002598 max=0.002715 Jy/beam ! Clean residual mean=0.000001 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.0616609 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 56 components and 0.0616609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087404Jy sigma=0.000630 ! Fit after self-cal, rms=0.087470Jy sigma=0.000629 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000164613 Jy ! Component: 100 - total flux cleaned = -0.000262865 Jy ! Component: 150 - total flux cleaned = -0.000295001 Jy ! Component: 200 - total flux cleaned = -0.000308377 Jy ! Total flux subtracted in 200 components = -0.000308377 Jy ! Clean residual min=-0.002518 max=0.002664 Jy/beam ! Clean residual mean=-0.000001 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.0613525 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 67 components and 0.0613525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087461Jy sigma=0.000629 ! Fit after self-cal, rms=0.087443Jy sigma=0.000629 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087443Jy sigma=0.000629 ! Fit after self-cal, rms=0.087584Jy sigma=0.000629 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.463 mas, bmaj=14.29 mas, bpa=-16.94 degrees ! Estimated noise=1094.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000606895 Jy ! Component: 100 - total flux cleaned = -0.000778428 Jy ! Component: 150 - total flux cleaned = -0.000826272 Jy ! Component: 200 - total flux cleaned = -0.000839657 Jy ! Total flux subtracted in 200 components = -0.000839657 Jy ! Clean residual min=-0.002484 max=0.002617 Jy/beam ! Clean residual mean=0.000001 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.0605128 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 70 components and 0.0605128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087570Jy sigma=0.000629 ! Fit after self-cal, rms=0.087618Jy sigma=0.000629 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000234031 Jy ! Component: 100 - total flux cleaned = -0.000272362 Jy ! Component: 150 - total flux cleaned = -0.00027243 Jy ! Component: 200 - total flux cleaned = -0.00027299 Jy ! Total flux subtracted in 200 components = -0.00027299 Jy ! Clean residual min=-0.002489 max=0.002522 Jy/beam ! Clean residual mean=-0.000000 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.0602399 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 76 components and 0.0602399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087609Jy sigma=0.000629 ! Fit after self-cal, rms=0.087603Jy sigma=0.000629 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087603Jy sigma=0.000629 ! Fit after self-cal, rms=0.087504Jy sigma=0.000629 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.427 mas, bmaj=18.98 mas, bpa=-6.079 degrees ! Estimated noise=1291.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000401184 Jy ! Component: 100 - total flux cleaned = -0.000440314 Jy ! Component: 150 - total flux cleaned = -0.000461048 Jy ! Component: 200 - total flux cleaned = -0.000461291 Jy ! Total flux subtracted in 200 components = -0.000461291 Jy ! Clean residual min=-0.002659 max=0.002611 Jy/beam ! Clean residual mean=0.000002 rms=0.000825 Jy/beam ! Combined flux in latest and established models = 0.0597786 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 87 components and 0.0597786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087499Jy sigma=0.000629 ! Fit after self-cal, rms=0.087517Jy sigma=0.000629 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.33144e-05 Jy ! Component: 100 - total flux cleaned = -2.3317e-05 Jy ! Component: 150 - total flux cleaned = -1.44365e-05 Jy ! Component: 200 - total flux cleaned = -1.41505e-05 Jy ! Total flux subtracted in 200 components = -1.41505e-05 Jy ! Clean residual min=-0.002657 max=0.002578 Jy/beam ! Clean residual mean=0.000001 rms=0.000823 Jy/beam ! Combined flux in latest and established models = 0.0597644 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 89 components and 0.0597644 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087514Jy sigma=0.000629 ! Fit after self-cal, rms=0.087517Jy sigma=0.000629 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.466 mas, bmaj=14.29 mas, bpa=-16.93 degrees ! Estimated noise=1091.01 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.466 x 14.29 at -16.93 degrees (North through East) ! Clean map min=-0.0031862 max=0.057695 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.576 mas, bmaj=12.53 mas, bpa=-19.33 degrees ! Estimated noise=1738.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0439205 Jy ! Component: 100 - total flux cleaned = 0.0539479 Jy ! Component: 150 - total flux cleaned = 0.0565745 Jy ! Component: 200 - total flux cleaned = 0.0578083 Jy ! Total flux subtracted in 200 components = 0.0578083 Jy ! Clean residual min=-0.004215 max=0.004294 Jy/beam ! Clean residual mean=-0.000001 rms=0.001017 Jy/beam ! Combined flux in latest and established models = 0.0578083 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0578083 Jy ! Inverting map and beam ! Estimated beam: bmin=3.466 mas, bmaj=14.29 mas, bpa=-16.93 degrees ! Estimated noise=1091.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112865 Jy ! Component: 100 - total flux cleaned = 0.00141031 Jy ! Component: 150 - total flux cleaned = 0.00145676 Jy ! Component: 200 - total flux cleaned = 0.00149574 Jy ! Total flux subtracted in 200 components = 0.00149574 Jy ! Clean residual min=-0.002614 max=0.002566 Jy/beam ! Clean residual mean=0.000000 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.0593041 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 42 components and 0.059304 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.427 mas, bmaj=18.98 mas, bpa=-6.079 degrees ! Estimated noise=1291.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000493498 Jy ! Component: 100 - total flux cleaned = 0.000494314 Jy ! Component: 150 - total flux cleaned = 0.000462919 Jy ! Component: 200 - total flux cleaned = 0.000448809 Jy ! Total flux subtracted in 200 components = 0.000448809 Jy ! Clean residual min=-0.002640 max=0.002588 Jy/beam ! Clean residual mean=0.000002 rms=0.000824 Jy/beam ! Combined flux in latest and established models = 0.0597529 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.47477e-05 Jy ! Component: 100 - total flux cleaned = -3.56307e-05 Jy ! Component: 150 - total flux cleaned = -3.60548e-05 Jy ! Component: 200 - total flux cleaned = -4.5175e-05 Jy ! Total flux subtracted in 200 components = -4.5175e-05 Jy ! Clean residual min=-0.002633 max=0.002576 Jy/beam ! Clean residual mean=0.000001 rms=0.000823 Jy/beam ! Combined flux in latest and established models = 0.0597077 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 51 components and 0.0597077 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.466 mas, bmaj=14.29 mas, bpa=-16.93 degrees ! Estimated noise=1091.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.66056e-05 Jy ! Component: 100 - total flux cleaned = -0.000149784 Jy ! Component: 150 - total flux cleaned = -0.000150306 Jy ! Component: 200 - total flux cleaned = -0.000131022 Jy ! Total flux subtracted in 200 components = -0.000131022 Jy ! Clean residual min=-0.002521 max=0.002538 Jy/beam ! Clean residual mean=0.000001 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 0.0595767 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 60 components and 0.0595767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087531Jy sigma=0.000629 ! Fit after self-cal, rms=0.087540Jy sigma=0.000629 wmodel J1232-1836_S_2017_10_09_pus_map.mod ! Writing 60 model components to file: J1232-1836_S_2017_10_09_pus_map.mod wobs J1232-1836_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1232-1836_S_2017_10_09_pus_uvs.fits wwins J1232-1836_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J1232-1836_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000618525 Jy ! Component: 100 - total flux cleaned = 0.000582963 Jy ! Component: 150 - total flux cleaned = 0.000393812 Jy ! Component: 200 - total flux cleaned = 0.000213516 Jy ! Component: 250 - total flux cleaned = 7.82878e-05 Jy ! Component: 300 - total flux cleaned = 4.68381e-05 Jy ! Component: 350 - total flux cleaned = 1.63817e-05 Jy ! Component: 400 - total flux cleaned = 4.48655e-05 Jy ! Component: 450 - total flux cleaned = 1.53477e-05 Jy ! Component: 500 - total flux cleaned = 1.54216e-05 Jy ! Component: 550 - total flux cleaned = 0.000119344 Jy ! Component: 600 - total flux cleaned = 0.000169478 Jy ! Component: 650 - total flux cleaned = 0.000144642 Jy ! Component: 700 - total flux cleaned = 0.000192759 Jy ! Component: 750 - total flux cleaned = 0.000169225 Jy ! Component: 800 - total flux cleaned = 0.000169268 Jy ! Component: 850 - total flux cleaned = 0.000146719 Jy ! Component: 900 - total flux cleaned = 0.00010348 Jy ! Component: 950 - total flux cleaned = 0.000146026 Jy ! Component: 1000 - total flux cleaned = 0.000125503 Jy ! Component: 1050 - total flux cleaned = 8.5246e-05 Jy ! Component: 1100 - total flux cleaned = 2.58225e-05 Jy ! Component: 1150 - total flux cleaned = 6.4686e-05 Jy ! Component: 1200 - total flux cleaned = 6.42623e-05 Jy ! Component: 1250 - total flux cleaned = -4.83733e-05 Jy ! Component: 1300 - total flux cleaned = -8.52155e-05 Jy ! Component: 1350 - total flux cleaned = -0.000212144 Jy ! Component: 1400 - total flux cleaned = -0.000265355 Jy ! Component: 1450 - total flux cleaned = -0.000352461 Jy ! Component: 1500 - total flux cleaned = -0.000369748 Jy ! Component: 1550 - total flux cleaned = -0.000471536 Jy ! Component: 1600 - total flux cleaned = -0.000538236 Jy ! Component: 1650 - total flux cleaned = -0.000702928 Jy ! Component: 1700 - total flux cleaned = -0.000783752 Jy ! Component: 1750 - total flux cleaned = -0.000879832 Jy ! Component: 1800 - total flux cleaned = -0.00100639 Jy ! Component: 1850 - total flux cleaned = -0.00116236 Jy ! Component: 1900 - total flux cleaned = -0.00126999 Jy ! Component: 1950 - total flux cleaned = -0.00142176 Jy ! Component: 2000 - total flux cleaned = -0.00149687 Jy ! Component: 2050 - total flux cleaned = -0.00161572 Jy ! Component: 2100 - total flux cleaned = -0.00167438 Jy ! Component: 2150 - total flux cleaned = -0.00173266 Jy ! Component: 2200 - total flux cleaned = -0.00180465 Jy ! Component: 2250 - total flux cleaned = -0.00186173 Jy ! Component: 2300 - total flux cleaned = -0.00193221 Jy ! Component: 2350 - total flux cleaned = -0.00196023 Jy ! Component: 2400 - total flux cleaned = -0.00201558 Jy ! Component: 2450 - total flux cleaned = -0.00204297 Jy ! Component: 2500 - total flux cleaned = -0.00207016 Jy ! Component: 2550 - total flux cleaned = -0.00212394 Jy ! Component: 2600 - total flux cleaned = -0.00213734 Jy ! Component: 2650 - total flux cleaned = -0.00219007 Jy ! Component: 2700 - total flux cleaned = -0.00221627 Jy ! Component: 2750 - total flux cleaned = -0.00224217 Jy ! Component: 2800 - total flux cleaned = -0.00228067 Jy ! Component: 2850 - total flux cleaned = -0.0023188 Jy ! Component: 2900 - total flux cleaned = -0.0023313 Jy ! Component: 2950 - total flux cleaned = -0.00234384 Jy ! Component: 3000 - total flux cleaned = -0.00239345 Jy ! Component: 3050 - total flux cleaned = -0.00239337 Jy ! Component: 3100 - total flux cleaned = -0.00245437 Jy ! Component: 3150 - total flux cleaned = -0.00245432 Jy ! Component: 3200 - total flux cleaned = -0.00249031 Jy ! Component: 3250 - total flux cleaned = -0.00245461 Jy ! Component: 3300 - total flux cleaned = -0.00247844 Jy ! Component: 3350 - total flux cleaned = -0.00250202 Jy ! Component: 3400 - total flux cleaned = -0.00253711 Jy ! Component: 3450 - total flux cleaned = -0.0025255 Jy ! Component: 3500 - total flux cleaned = -0.00250247 Jy ! Component: 3550 - total flux cleaned = -0.00249103 Jy ! Component: 3600 - total flux cleaned = -0.00247967 Jy ! Component: 3650 - total flux cleaned = -0.00250234 Jy ! Component: 3700 - total flux cleaned = -0.00246847 Jy ! Component: 3750 - total flux cleaned = -0.00249091 Jy ! Component: 3800 - total flux cleaned = -0.0024685 Jy ! Component: 3850 - total flux cleaned = -0.00245727 Jy ! Component: 3900 - total flux cleaned = -0.00247931 Jy ! Component: 3950 - total flux cleaned = -0.00242437 Jy ! Component: 4000 - total flux cleaned = -0.00242434 Jy ! Component: 4050 - total flux cleaned = -0.00243522 Jy ! Total flux subtracted in 4096 components = -0.00243519 Jy ! Clean residual min=-0.000626 max=0.000616 Jy/beam ! Clean residual mean=0.000002 rms=0.000199 Jy/beam ! Combined flux in latest and established models = 0.0571415 Jy keep ! Adding 288 model components to the UV plane model. ! The established model now contains 348 components and 0.0571415 Jy ![Exited script file: muppet] wmap "J1232-1836_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.466 x 14.29 at -16.93 degrees (North through East) ! Clean map min=-0.0032575 max=0.057793 Jy/beam ! Writing clean map to FITS file: J1232-1836_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0577928 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000195521 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.01494 1.01494 2.02988 4.05976 8.11952 16.239 32.4781 64.9561 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.057 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.466 x 14.29 at -16.93 degrees (North through East) ! Clean map min=-0.0032575 max=0.057793 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1232-1836_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:12:49 2019