! Started logfile: J1232-1836_S_2017_08_05_pus_uvs.log on Thu May 9 19:29:30 2019 obs J1232-1836_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J1232-1836_S_2017_08_05_pus_uva.fits ! AN table 1: 108 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.667284 visibilities/baseline/integration-bin. ! Found source: J1232-1836 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 12972 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1232-1836_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 326 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 412 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 412 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 808 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.997784Jy sigma=0.007483 ! Fit after self-cal, rms=0.952231Jy sigma=0.007158 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.501 mas, bmaj=7.028 mas, bpa=-6.616 degrees ! Estimated noise=1395.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0418368 Jy ! Component: 100 - total flux cleaned = 0.05096 Jy ! Total flux subtracted in 100 components = 0.05096 Jy ! Clean residual min=-0.004518 max=0.003983 Jy/beam ! Clean residual mean=-0.000006 rms=0.000989 Jy/beam ! Combined flux in latest and established models = 0.05096 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.05096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095357Jy sigma=0.000663 ! Fit after self-cal, rms=0.094124Jy sigma=0.000654 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.006 mas, bmaj=7.908 mas, bpa=-5.432 degrees ! Estimated noise=1018.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00228477 Jy ! Component: 100 - total flux cleaned = 0.00299435 Jy ! Component: 150 - total flux cleaned = 0.00315204 Jy ! Component: 200 - total flux cleaned = 0.00320668 Jy ! Total flux subtracted in 200 components = 0.00320668 Jy ! Clean residual min=-0.003672 max=0.003074 Jy/beam ! Clean residual mean=-0.000007 rms=0.000816 Jy/beam ! Combined flux in latest and established models = 0.0541667 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0541667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094037Jy sigma=0.000654 ! Fit after self-cal, rms=0.094028Jy sigma=0.000653 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 1.08 HN 0.93 KP 1.03 ! LA 0.99 MK 1.09 NL 0.92 OV 1.16 ! PT 0.99 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 0.95 KP 1.02 ! LA 0.96 MK 0.98 NL 1.13 OV 1.01 ! PT 0.97 SC 1.10 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.95 KP 0.83 ! LA 0.80 MK 1.00 NL 1.10 OV 1.13 ! PT 1.07 SC 0.93 ! ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 0.76 KP 1.00* ! LA 1.00* MK 0.86 NL 1.00* OV 1.00* ! PT 0.98 SC 1.00* ! ! ! Fit before self-cal, rms=0.094028Jy sigma=0.000653 ! Fit after self-cal, rms=0.091495Jy sigma=0.000652 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.992 mas, bmaj=7.934 mas, bpa=-5.718 degrees ! Estimated noise=1019.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000194331 Jy ! Component: 100 - total flux cleaned = 0.000371939 Jy ! Component: 150 - total flux cleaned = 0.000490934 Jy ! Component: 200 - total flux cleaned = 0.000511934 Jy ! Total flux subtracted in 200 components = 0.000511934 Jy ! Clean residual min=-0.003437 max=0.002954 Jy/beam ! Clean residual mean=-0.000003 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 0.0546786 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 16 components and 0.0546786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091476Jy sigma=0.000652 ! Fit after self-cal, rms=0.091381Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091381Jy sigma=0.000651 ! Fit after self-cal, rms=0.090984Jy sigma=0.000651 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.994 mas, bmaj=7.882 mas, bpa=-5.967 degrees ! Estimated noise=1016.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000156124 Jy ! Component: 100 - total flux cleaned = 0.000175627 Jy ! Component: 150 - total flux cleaned = 0.000145399 Jy ! Component: 200 - total flux cleaned = 0.000131404 Jy ! Total flux subtracted in 200 components = 0.000131404 Jy ! Clean residual min=-0.003090 max=0.002829 Jy/beam ! Clean residual mean=-0.000003 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.05481 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 22 components and 0.05481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090977Jy sigma=0.000651 ! Fit after self-cal, rms=0.090989Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.59702e-05 Jy ! Component: 100 - total flux cleaned = 0.000108585 Jy ! Component: 150 - total flux cleaned = 0.000136267 Jy ! Component: 200 - total flux cleaned = 0.000148784 Jy ! Total flux subtracted in 200 components = 0.000148784 Jy ! Clean residual min=-0.003093 max=0.002832 Jy/beam ! Clean residual mean=-0.000004 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.0549588 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 25 components and 0.0549588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090983Jy sigma=0.000650 ! Fit after self-cal, rms=0.090961Jy sigma=0.000650 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090961Jy sigma=0.000650 ! Fit after self-cal, rms=0.091055Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.991 mas, bmaj=7.866 mas, bpa=-6.085 degrees ! Estimated noise=1014.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.85016e-05 Jy ! Component: 100 - total flux cleaned = 7.63536e-05 Jy ! Component: 150 - total flux cleaned = 7.61395e-05 Jy ! Component: 200 - total flux cleaned = 7.58914e-05 Jy ! Total flux subtracted in 200 components = 7.58914e-05 Jy ! Clean residual min=-0.002979 max=0.002888 Jy/beam ! Clean residual mean=-0.000004 rms=0.000692 Jy/beam ! Combined flux in latest and established models = 0.0550347 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 30 components and 0.0550347 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091051Jy sigma=0.000650 ! Fit after self-cal, rms=0.091069Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.08879e-05 Jy ! Component: 100 - total flux cleaned = 3.25808e-05 Jy ! Component: 150 - total flux cleaned = 3.25646e-05 Jy ! Component: 200 - total flux cleaned = 4.19528e-05 Jy ! Total flux subtracted in 200 components = 4.19528e-05 Jy ! Clean residual min=-0.002974 max=0.002875 Jy/beam ! Clean residual mean=-0.000004 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.0550766 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 30 components and 0.0550766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091066Jy sigma=0.000650 ! Fit after self-cal, rms=0.091067Jy sigma=0.000650 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091067Jy sigma=0.000650 ! Fit after self-cal, rms=0.091109Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.233 mas, bmaj=16.35 mas, bpa=-3.131 degrees ! Estimated noise=1326.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000456513 Jy ! Component: 100 - total flux cleaned = 0.000455887 Jy ! Component: 150 - total flux cleaned = 0.000455322 Jy ! Component: 200 - total flux cleaned = 0.000454868 Jy ! Total flux subtracted in 200 components = 0.000454868 Jy ! Clean residual min=-0.003164 max=0.003213 Jy/beam ! Clean residual mean=-0.000008 rms=0.000916 Jy/beam ! Combined flux in latest and established models = 0.0555315 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 36 components and 0.0555315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091114Jy sigma=0.000650 ! Fit after self-cal, rms=0.091119Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000148245 Jy ! Component: 100 - total flux cleaned = 0.000146584 Jy ! Component: 150 - total flux cleaned = 0.000145805 Jy ! Component: 200 - total flux cleaned = 0.000145308 Jy ! Total flux subtracted in 200 components = 0.000145308 Jy ! Clean residual min=-0.003090 max=0.003240 Jy/beam ! Clean residual mean=-0.000009 rms=0.000923 Jy/beam ! Combined flux in latest and established models = 0.0556768 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 37 components and 0.0556768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091124Jy sigma=0.000650 ! Fit after self-cal, rms=0.091123Jy sigma=0.000650 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.989 mas, bmaj=7.858 mas, bpa=-6.122 degrees ! Estimated noise=1013.91 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.989 x 7.858 at -6.122 degrees (North through East) ! Clean map min=-0.0027631 max=0.052456 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.503 mas, bmaj=7.012 mas, bpa=-7.206 degrees ! Estimated noise=1357.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0419626 Jy ! Component: 100 - total flux cleaned = 0.0511803 Jy ! Component: 150 - total flux cleaned = 0.0528642 Jy ! Component: 200 - total flux cleaned = 0.0536385 Jy ! Total flux subtracted in 200 components = 0.0536385 Jy ! Clean residual min=-0.003249 max=0.003355 Jy/beam ! Clean residual mean=-0.000003 rms=0.000877 Jy/beam ! Combined flux in latest and established models = 0.0536385 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0536385 Jy ! Inverting map and beam ! Estimated beam: bmin=2.989 mas, bmaj=7.858 mas, bpa=-6.122 degrees ! Estimated noise=1013.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000987187 Jy ! Component: 100 - total flux cleaned = 0.00120827 Jy ! Component: 150 - total flux cleaned = 0.00140525 Jy ! Component: 200 - total flux cleaned = 0.00153302 Jy ! Total flux subtracted in 200 components = 0.00153302 Jy ! Clean residual min=-0.003019 max=0.002857 Jy/beam ! Clean residual mean=-0.000004 rms=0.000695 Jy/beam ! Combined flux in latest and established models = 0.0551716 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 15 components and 0.0551716 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.233 mas, bmaj=16.35 mas, bpa=-3.131 degrees ! Estimated noise=1326.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000473347 Jy ! Component: 100 - total flux cleaned = 0.000474246 Jy ! Component: 150 - total flux cleaned = 0.000503411 Jy ! Component: 200 - total flux cleaned = 0.00052822 Jy ! Total flux subtracted in 200 components = 0.00052822 Jy ! Clean residual min=-0.003095 max=0.003241 Jy/beam ! Clean residual mean=-0.000009 rms=0.000920 Jy/beam ! Combined flux in latest and established models = 0.0556998 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.06662e-05 Jy ! Component: 100 - total flux cleaned = 3.0435e-05 Jy ! Component: 150 - total flux cleaned = 4.76655e-05 Jy ! Component: 200 - total flux cleaned = 6.37652e-05 Jy ! Total flux subtracted in 200 components = 6.37652e-05 Jy ! Clean residual min=-0.003091 max=0.003229 Jy/beam ! Clean residual mean=-0.000009 rms=0.000919 Jy/beam ! Combined flux in latest and established models = 0.0557635 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 26 components and 0.0557635 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.989 mas, bmaj=7.858 mas, bpa=-6.122 degrees ! Estimated noise=1013.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000231023 Jy ! Component: 100 - total flux cleaned = -0.000254884 Jy ! Component: 150 - total flux cleaned = -0.00031571 Jy ! Component: 200 - total flux cleaned = -0.000332963 Jy ! Total flux subtracted in 200 components = -0.000332963 Jy ! Clean residual min=-0.002933 max=0.002869 Jy/beam ! Clean residual mean=-0.000004 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.0554306 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 30 components and 0.0554306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091128Jy sigma=0.000650 ! Fit after self-cal, rms=0.091125Jy sigma=0.000650 wmodel J1232-1836_S_2017_08_05_pus_map.mod ! Writing 30 model components to file: J1232-1836_S_2017_08_05_pus_map.mod wobs J1232-1836_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J1232-1836_S_2017_08_05_pus_uvs.fits wwins J1232-1836_S_2017_08_05_pus_map.win ! wwins: Wrote 1 windows to J1232-1836_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 4.56765e-05 Jy ! Component: 100 - total flux cleaned = 0.000383371 Jy ! Component: 150 - total flux cleaned = 0.000564984 Jy ! Component: 200 - total flux cleaned = 0.000651563 Jy ! Component: 250 - total flux cleaned = 0.000691161 Jy ! Component: 300 - total flux cleaned = 0.000729346 Jy ! Component: 350 - total flux cleaned = 0.00069204 Jy ! Component: 400 - total flux cleaned = 0.000764211 Jy ! Component: 450 - total flux cleaned = 0.000693607 Jy ! Component: 500 - total flux cleaned = 0.000762857 Jy ! Component: 550 - total flux cleaned = 0.000763439 Jy ! Component: 600 - total flux cleaned = 0.000665942 Jy ! Component: 650 - total flux cleaned = 0.000634817 Jy ! Component: 700 - total flux cleaned = 0.000478873 Jy ! Component: 750 - total flux cleaned = 0.000448212 Jy ! Component: 800 - total flux cleaned = 0.000297609 Jy ! Component: 850 - total flux cleaned = 0.000150289 Jy ! Component: 900 - total flux cleaned = -5.2026e-05 Jy ! Component: 950 - total flux cleaned = -0.000165352 Jy ! Component: 1000 - total flux cleaned = -0.000305145 Jy ! Component: 1050 - total flux cleaned = -0.000468975 Jy ! Component: 1100 - total flux cleaned = -0.000603422 Jy ! Component: 1150 - total flux cleaned = -0.000682796 Jy ! Component: 1200 - total flux cleaned = -0.000890726 Jy ! Component: 1250 - total flux cleaned = -0.000992387 Jy ! Component: 1300 - total flux cleaned = -0.00109288 Jy ! Component: 1350 - total flux cleaned = -0.0012168 Jy ! Component: 1400 - total flux cleaned = -0.00138744 Jy ! Component: 1450 - total flux cleaned = -0.00148302 Jy ! Component: 1500 - total flux cleaned = -0.00157748 Jy ! Component: 1550 - total flux cleaned = -0.00169402 Jy ! Component: 1600 - total flux cleaned = -0.00180858 Jy ! Component: 1650 - total flux cleaned = -0.00189887 Jy ! Component: 1700 - total flux cleaned = -0.00203278 Jy ! Component: 1750 - total flux cleaned = -0.00214222 Jy ! Component: 1800 - total flux cleaned = -0.0022718 Jy ! Component: 1850 - total flux cleaned = -0.00237834 Jy ! Component: 1900 - total flux cleaned = -0.00252513 Jy ! Component: 1950 - total flux cleaned = -0.00268999 Jy ! Component: 2000 - total flux cleaned = -0.0027306 Jy ! Component: 2050 - total flux cleaned = -0.00277056 Jy ! Component: 2100 - total flux cleaned = -0.00288986 Jy ! Component: 2150 - total flux cleaned = -0.00288952 Jy ! Component: 2200 - total flux cleaned = -0.00292865 Jy ! Component: 2250 - total flux cleaned = -0.00300512 Jy ! Component: 2300 - total flux cleaned = -0.00306202 Jy ! Component: 2350 - total flux cleaned = -0.00315585 Jy ! Component: 2400 - total flux cleaned = -0.00322995 Jy ! Component: 2450 - total flux cleaned = -0.00315706 Jy ! Component: 2500 - total flux cleaned = -0.00321161 Jy ! Component: 2550 - total flux cleaned = -0.00322942 Jy ! Component: 2600 - total flux cleaned = -0.00335361 Jy ! Component: 2650 - total flux cleaned = -0.00338861 Jy ! Component: 2700 - total flux cleaned = -0.00333655 Jy ! Component: 2750 - total flux cleaned = -0.00340505 Jy ! Component: 2800 - total flux cleaned = -0.0034392 Jy ! Component: 2850 - total flux cleaned = -0.00348964 Jy ! Component: 2900 - total flux cleaned = -0.00345598 Jy ! Component: 2950 - total flux cleaned = -0.00350554 Jy ! Component: 3000 - total flux cleaned = -0.00352156 Jy ! Component: 3050 - total flux cleaned = -0.0035056 Jy ! Component: 3100 - total flux cleaned = -0.00352184 Jy ! Component: 3150 - total flux cleaned = -0.0035218 Jy ! Component: 3200 - total flux cleaned = -0.00353756 Jy ! Component: 3250 - total flux cleaned = -0.00356841 Jy ! Component: 3300 - total flux cleaned = -0.00359916 Jy ! Component: 3350 - total flux cleaned = -0.00359925 Jy ! Component: 3400 - total flux cleaned = -0.00361435 Jy ! Component: 3450 - total flux cleaned = -0.00362952 Jy ! Component: 3500 - total flux cleaned = -0.00370388 Jy ! Component: 3550 - total flux cleaned = -0.00368932 Jy ! Component: 3600 - total flux cleaned = -0.00374751 Jy ! Component: 3650 - total flux cleaned = -0.00381963 Jy ! Component: 3700 - total flux cleaned = -0.00379093 Jy ! Component: 3750 - total flux cleaned = -0.00383357 Jy ! Component: 3800 - total flux cleaned = -0.00389025 Jy ! Component: 3850 - total flux cleaned = -0.00387643 Jy ! Component: 3900 - total flux cleaned = -0.00395967 Jy ! Component: 3950 - total flux cleaned = -0.00400106 Jy ! Component: 4000 - total flux cleaned = -0.00405577 Jy ! Component: 4050 - total flux cleaned = -0.0040422 Jy ! Total flux subtracted in 4096 components = -0.00413625 Jy ! Clean residual min=-0.000695 max=0.000958 Jy/beam ! Clean residual mean=0.000001 rms=0.000251 Jy/beam ! Combined flux in latest and established models = 0.0512943 Jy keep ! Adding 299 model components to the UV plane model. ! The established model now contains 329 components and 0.0512943 Jy ![Exited script file: muppet] wmap "J1232-1836_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.989 x 7.858 at -6.122 degrees (North through East) ! Clean map min=-0.0016273 max=0.052444 Jy/beam ! Writing clean map to FITS file: J1232-1836_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0524439 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000246345 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.4092 1.4092 2.81839 5.63678 11.2736 22.5471 45.0942 90.1885 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.052 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.989 x 7.858 at -6.122 degrees (North through East) ! Clean map min=-0.0016273 max=0.052444 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1232-1836_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:29:35 2019