! Started logfile: J1232-1015_S_2017_08_05_pus_uvs.log on Thu May 9 19:29:24 2019 obs J1232-1015_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J1232-1015_S_2017_08_05_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.767836 visibilities/baseline/integration-bin. ! Found source: J1232-1015 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 10504 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1232-1015_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 92 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 92 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 92 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 485 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.922915Jy sigma=0.007723 ! Fit after self-cal, rms=0.914648Jy sigma=0.007658 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.494 mas, bmaj=7.119 mas, bpa=-5.758 degrees ! Estimated noise=1423.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.065826 Jy ! Component: 100 - total flux cleaned = 0.0811027 Jy ! Total flux subtracted in 100 components = 0.0811027 Jy ! Clean residual min=-0.005633 max=0.008496 Jy/beam ! Clean residual mean=0.000001 rms=0.001445 Jy/beam ! Combined flux in latest and established models = 0.0811027 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0811027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088795Jy sigma=0.000694 ! Fit after self-cal, rms=0.088784Jy sigma=0.000694 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.963 mas, bmaj=8.159 mas, bpa=-5.552 degrees ! Estimated noise=942.075 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10, -6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0112367 Jy ! Component: 100 - total flux cleaned = 0.0184973 Jy ! Component: 150 - total flux cleaned = 0.0235818 Jy ! Component: 200 - total flux cleaned = 0.0272789 Jy ! Total flux subtracted in 200 components = 0.0272789 Jy ! Clean residual min=-0.003930 max=0.003741 Jy/beam ! Clean residual mean=0.000001 rms=0.000939 Jy/beam ! Combined flux in latest and established models = 0.108382 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 47 components and 0.108382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086929Jy sigma=0.000680 ! Fit after self-cal, rms=0.086786Jy sigma=0.000679 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 0.95 KP 1.00 ! LA 0.99 MK 1.08 NL 0.90 OV 1.00 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.02 KP 0.95 ! LA 0.96 MK 1.02 NL 1.06 OV 1.10 ! PT 1.03 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.98 KP 0.89 ! LA 0.71 MK 0.99 NL 1.19 OV 0.98 ! PT 0.96 SC 1.02 ! ! ! Correcting IF 4. ! A total of 39 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 0.92 KP 1.00* ! LA 1.00* MK 1.13 NL 1.00* OV 1.00* ! PT 0.99 SC 1.00* ! ! ! Fit before self-cal, rms=0.086786Jy sigma=0.000679 ! Fit after self-cal, rms=0.082578Jy sigma=0.000671 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.005 mas, bmaj=8.262 mas, bpa=-5.403 degrees ! Estimated noise=932.272 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (15.5, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00340864 Jy ! Component: 100 - total flux cleaned = 0.00533246 Jy ! Component: 150 - total flux cleaned = 0.00651863 Jy ! Component: 200 - total flux cleaned = 0.00688121 Jy ! Total flux subtracted in 200 components = 0.00688121 Jy ! Clean residual min=-0.002485 max=0.002304 Jy/beam ! Clean residual mean=-0.000003 rms=0.000608 Jy/beam ! Combined flux in latest and established models = 0.115263 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 68 components and 0.115263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082419Jy sigma=0.000670 ! Fit after self-cal, rms=0.082369Jy sigma=0.000669 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082369Jy sigma=0.000669 ! Fit after self-cal, rms=0.081684Jy sigma=0.000668 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.01 mas, bmaj=8.266 mas, bpa=-5.484 degrees ! Estimated noise=928.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157318 Jy ! Component: 100 - total flux cleaned = 0.00229828 Jy ! Component: 150 - total flux cleaned = 0.00266673 Jy ! Component: 200 - total flux cleaned = 0.00278274 Jy ! Total flux subtracted in 200 components = 0.00278274 Jy ! Clean residual min=-0.002053 max=0.002047 Jy/beam ! Clean residual mean=-0.000002 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.118046 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 84 components and 0.118046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081644Jy sigma=0.000668 ! Fit after self-cal, rms=0.081651Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000546019 Jy ! Component: 100 - total flux cleaned = 0.000624933 Jy ! Component: 150 - total flux cleaned = 0.000601127 Jy ! Component: 200 - total flux cleaned = 0.000578064 Jy ! Total flux subtracted in 200 components = 0.000578064 Jy ! Clean residual min=-0.002087 max=0.002002 Jy/beam ! Clean residual mean=-0.000003 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.118624 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 94 components and 0.118624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081635Jy sigma=0.000668 ! Fit after self-cal, rms=0.081633Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081633Jy sigma=0.000668 ! Fit after self-cal, rms=0.081629Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.011 mas, bmaj=8.272 mas, bpa=-5.493 degrees ! Estimated noise=927.502 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000638191 Jy ! Component: 100 - total flux cleaned = 0.000833054 Jy ! Component: 150 - total flux cleaned = 0.000898749 Jy ! Component: 200 - total flux cleaned = 0.000940337 Jy ! Total flux subtracted in 200 components = 0.000940337 Jy ! Clean residual min=-0.002033 max=0.002025 Jy/beam ! Clean residual mean=-0.000002 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.119564 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 100 components and 0.119564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081616Jy sigma=0.000668 ! Fit after self-cal, rms=0.081621Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000174231 Jy ! Component: 100 - total flux cleaned = 0.00019408 Jy ! Component: 150 - total flux cleaned = 0.000213112 Jy ! Component: 200 - total flux cleaned = 0.000195511 Jy ! Total flux subtracted in 200 components = 0.000195511 Jy ! Clean residual min=-0.002071 max=0.002004 Jy/beam ! Clean residual mean=-0.000002 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.11976 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 102 components and 0.11976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081612Jy sigma=0.000667 ! Fit after self-cal, rms=0.081611Jy sigma=0.000667 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081611Jy sigma=0.000667 ! Fit after self-cal, rms=0.081724Jy sigma=0.000667 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.069 mas, bmaj=16.07 mas, bpa=-6.808 degrees ! Estimated noise=1198.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000551917 Jy ! Component: 100 - total flux cleaned = 0.000624351 Jy ! Component: 150 - total flux cleaned = 0.000624337 Jy ! Component: 200 - total flux cleaned = 0.000638282 Jy ! Total flux subtracted in 200 components = 0.000638282 Jy ! Clean residual min=-0.002156 max=0.002042 Jy/beam ! Clean residual mean=-0.000005 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.120398 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 124 components and 0.120398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081721Jy sigma=0.000667 ! Fit after self-cal, rms=0.081723Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.84789e-05 Jy ! Component: 100 - total flux cleaned = 9.99708e-05 Jy ! Component: 150 - total flux cleaned = 0.000100489 Jy ! Component: 200 - total flux cleaned = 0.000111422 Jy ! Total flux subtracted in 200 components = 0.000111422 Jy ! Clean residual min=-0.002125 max=0.002040 Jy/beam ! Clean residual mean=-0.000005 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.120509 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 131 components and 0.120509 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081723Jy sigma=0.000667 ! Fit after self-cal, rms=0.081723Jy sigma=0.000667 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.012 mas, bmaj=8.276 mas, bpa=-5.487 degrees ! Estimated noise=927.882 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.012 x 8.276 at -5.487 degrees (North through East) ! Clean map min=-0.0019417 max=0.085751 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.532 mas, bmaj=7.228 mas, bpa=-5.754 degrees ! Estimated noise=1411.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0644549 Jy ! Component: 100 - total flux cleaned = 0.0801042 Jy ! Component: 150 - total flux cleaned = 0.0882888 Jy ! Component: 200 - total flux cleaned = 0.0941992 Jy ! Total flux subtracted in 200 components = 0.0941992 Jy ! Clean residual min=-0.004229 max=0.003948 Jy/beam ! Clean residual mean=-0.000000 rms=0.001044 Jy/beam ! Combined flux in latest and established models = 0.0941992 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0941992 Jy ! Inverting map and beam ! Estimated beam: bmin=3.012 mas, bmaj=8.276 mas, bpa=-5.487 degrees ! Estimated noise=927.882 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00672787 Jy ! Component: 100 - total flux cleaned = 0.0113301 Jy ! Component: 150 - total flux cleaned = 0.0147572 Jy ! Component: 200 - total flux cleaned = 0.0174436 Jy ! Total flux subtracted in 200 components = 0.0174436 Jy ! Clean residual min=-0.002572 max=0.002250 Jy/beam ! Clean residual mean=-0.000002 rms=0.000608 Jy/beam ! Combined flux in latest and established models = 0.111643 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 55 components and 0.111643 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.069 mas, bmaj=16.07 mas, bpa=-6.808 degrees ! Estimated noise=1198.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00331351 Jy ! Component: 100 - total flux cleaned = 0.00538181 Jy ! Component: 150 - total flux cleaned = 0.00674452 Jy ! Component: 200 - total flux cleaned = 0.00767181 Jy ! Total flux subtracted in 200 components = 0.00767181 Jy ! Clean residual min=-0.002281 max=0.002009 Jy/beam ! Clean residual mean=-0.000005 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.119315 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000432185 Jy ! Component: 100 - total flux cleaned = 0.000627174 Jy ! Component: 150 - total flux cleaned = 0.000664844 Jy ! Component: 200 - total flux cleaned = 0.000717022 Jy ! Total flux subtracted in 200 components = 0.000717022 Jy ! Clean residual min=-0.002203 max=0.002008 Jy/beam ! Clean residual mean=-0.000005 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 0.120032 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 116 components and 0.120032 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.012 mas, bmaj=8.276 mas, bpa=-5.487 degrees ! Estimated noise=927.882 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000417994 Jy ! Component: 100 - total flux cleaned = -0.000314795 Jy ! Component: 150 - total flux cleaned = -0.000283229 Jy ! Component: 200 - total flux cleaned = -0.000283301 Jy ! Total flux subtracted in 200 components = -0.000283301 Jy ! Clean residual min=-0.002063 max=0.001874 Jy/beam ! Clean residual mean=-0.000002 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.119748 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 132 components and 0.119748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081760Jy sigma=0.000668 ! Fit after self-cal, rms=0.081755Jy sigma=0.000668 wmodel J1232-1015_S_2017_08_05_pus_map.mod ! Writing 132 model components to file: J1232-1015_S_2017_08_05_pus_map.mod wobs J1232-1015_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J1232-1015_S_2017_08_05_pus_uvs.fits wwins J1232-1015_S_2017_08_05_pus_map.win ! wwins: Wrote 3 windows to J1232-1015_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000847042 Jy ! Component: 100 - total flux cleaned = -0.00130237 Jy ! Component: 150 - total flux cleaned = -0.00176309 Jy ! Component: 200 - total flux cleaned = -0.00201348 Jy ! Component: 250 - total flux cleaned = -0.00207412 Jy ! Component: 300 - total flux cleaned = -0.00218987 Jy ! Component: 350 - total flux cleaned = -0.00227322 Jy ! Component: 400 - total flux cleaned = -0.00232712 Jy ! Component: 450 - total flux cleaned = -0.00235326 Jy ! Component: 500 - total flux cleaned = -0.00240402 Jy ! Component: 550 - total flux cleaned = -0.00250314 Jy ! Component: 600 - total flux cleaned = -0.00252746 Jy ! Component: 650 - total flux cleaned = -0.00252745 Jy ! Component: 700 - total flux cleaned = -0.00248101 Jy ! Component: 750 - total flux cleaned = -0.00245857 Jy ! Component: 800 - total flux cleaned = -0.00239231 Jy ! Component: 850 - total flux cleaned = -0.00234931 Jy ! Component: 900 - total flux cleaned = -0.002307 Jy ! Component: 950 - total flux cleaned = -0.00228579 Jy ! Component: 1000 - total flux cleaned = -0.0022034 Jy ! Component: 1050 - total flux cleaned = -0.0022038 Jy ! Component: 1100 - total flux cleaned = -0.00212383 Jy ! Component: 1150 - total flux cleaned = -0.00210438 Jy ! Component: 1200 - total flux cleaned = -0.00214328 Jy ! Component: 1250 - total flux cleaned = -0.0021053 Jy ! Component: 1300 - total flux cleaned = -0.0020487 Jy ! Component: 1350 - total flux cleaned = -0.00203017 Jy ! Component: 1400 - total flux cleaned = -0.00201178 Jy ! Component: 1450 - total flux cleaned = -0.00199378 Jy ! Component: 1500 - total flux cleaned = -0.00197559 Jy ! Component: 1550 - total flux cleaned = -0.00195787 Jy ! Component: 1600 - total flux cleaned = -0.00194025 Jy ! Component: 1650 - total flux cleaned = -0.00190567 Jy ! Component: 1700 - total flux cleaned = -0.0018716 Jy ! Component: 1750 - total flux cleaned = -0.00182124 Jy ! Component: 1800 - total flux cleaned = -0.00185443 Jy ! Component: 1850 - total flux cleaned = -0.00180522 Jy ! Component: 1900 - total flux cleaned = -0.00178934 Jy ! Component: 1950 - total flux cleaned = -0.00178939 Jy ! Component: 2000 - total flux cleaned = -0.00178938 Jy ! Component: 2050 - total flux cleaned = -0.00180506 Jy ! Component: 2100 - total flux cleaned = -0.0017742 Jy ! Component: 2150 - total flux cleaned = -0.00178941 Jy ! Component: 2200 - total flux cleaned = -0.00174394 Jy ! Component: 2250 - total flux cleaned = -0.00171414 Jy ! Component: 2300 - total flux cleaned = -0.00166959 Jy ! Component: 2350 - total flux cleaned = -0.00163998 Jy ! Component: 2400 - total flux cleaned = -0.001553 Jy ! Component: 2450 - total flux cleaned = -0.00159613 Jy ! Component: 2500 - total flux cleaned = -0.00149642 Jy ! Component: 2550 - total flux cleaned = -0.00144015 Jy ! Component: 2600 - total flux cleaned = -0.00146816 Jy ! Component: 2650 - total flux cleaned = -0.0013851 Jy ! Component: 2700 - total flux cleaned = -0.00139873 Jy ! Component: 2750 - total flux cleaned = -0.00130373 Jy ! Component: 2800 - total flux cleaned = -0.0012635 Jy ! Component: 2850 - total flux cleaned = -0.00126362 Jy ! Component: 2900 - total flux cleaned = -0.00126364 Jy ! Component: 2950 - total flux cleaned = -0.00128973 Jy ! Component: 3000 - total flux cleaned = -0.00128969 Jy ! Component: 3050 - total flux cleaned = -0.00126386 Jy ! Component: 3100 - total flux cleaned = -0.00123828 Jy ! Component: 3150 - total flux cleaned = -0.00127619 Jy ! Component: 3200 - total flux cleaned = -0.00121315 Jy ! Component: 3250 - total flux cleaned = -0.00117581 Jy ! Component: 3300 - total flux cleaned = -0.00118811 Jy ! Component: 3350 - total flux cleaned = -0.00121251 Jy ! Component: 3400 - total flux cleaned = -0.00116375 Jy ! Component: 3450 - total flux cleaned = -0.00116385 Jy ! Component: 3500 - total flux cleaned = -0.00119977 Jy ! Component: 3550 - total flux cleaned = -0.0011521 Jy ! Component: 3600 - total flux cleaned = -0.0011521 Jy ! Component: 3650 - total flux cleaned = -0.00110518 Jy ! Component: 3700 - total flux cleaned = -0.00110521 Jy ! Component: 3750 - total flux cleaned = -0.00109367 Jy ! Component: 3800 - total flux cleaned = -0.00104766 Jy ! Component: 3850 - total flux cleaned = -0.0010248 Jy ! Component: 3900 - total flux cleaned = -0.000990781 Jy ! Component: 3950 - total flux cleaned = -0.000979494 Jy ! Component: 4000 - total flux cleaned = -0.000900972 Jy ! Component: 4050 - total flux cleaned = -0.00093441 Jy ! Total flux subtracted in 4096 components = -0.000867896 Jy ! Clean residual min=-0.000655 max=0.000644 Jy/beam ! Clean residual mean=-0.000001 rms=0.000192 Jy/beam ! Combined flux in latest and established models = 0.11888 Jy keep ! Adding 269 model components to the UV plane model. ! The established model now contains 401 components and 0.11888 Jy ![Exited script file: muppet] wmap "J1232-1015_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.012 x 8.276 at -5.487 degrees (North through East) ! Clean map min=-0.0013757 max=0.085411 Jy/beam ! Writing clean map to FITS file: J1232-1015_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0854112 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000187196 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.657511 0.657511 1.31502 2.63005 5.26009 10.5202 21.0404 42.0807 84.1614 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.085 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.012 x 8.276 at -5.487 degrees (North through East) ! Clean map min=-0.0013757 max=0.085411 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1232-1015_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:29:30 2019