! Started logfile: J1232-0224_S_2017_08_12_pus_uvs.log on Fri May 10 14:59:41 2019 obs J1232-0224_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J1232-0224_S_2017_08_12_pus_uva.fits ! AN table 1: 84 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.96164 visibilities/baseline/integration-bin. ! Found source: J1232-0224 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 14540 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1232-0224_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 104 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 535 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.669837Jy sigma=0.005350 ! Fit after self-cal, rms=0.647285Jy sigma=0.005184 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.719 mas, bmaj=6.824 mas, bpa=-4.101 degrees ! Estimated noise=1164.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.27414 Jy ! Component: 100 - total flux cleaned = 0.354309 Jy ! Total flux subtracted in 100 components = 0.354309 Jy ! Clean residual min=-0.030820 max=0.092590 Jy/beam ! Clean residual mean=0.000040 rms=0.007829 Jy/beam ! Combined flux in latest and established models = 0.354309 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.354309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197300Jy sigma=0.001579 ! Fit after self-cal, rms=0.197182Jy sigma=0.001578 ! Inverting map ! Added new window around map position (-10, -4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0826094 Jy ! Component: 100 - total flux cleaned = 0.127746 Jy ! Total flux subtracted in 100 components = 0.127746 Jy ! Clean residual min=-0.017512 max=0.045231 Jy/beam ! Clean residual mean=0.000026 rms=0.005172 Jy/beam ! Combined flux in latest and established models = 0.482055 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 25 components and 0.482055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147058Jy sigma=0.001153 ! Fit after self-cal, rms=0.140625Jy sigma=0.001105 ! Inverting map ! Added new window around map position (-5.5, -2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0478842 Jy ! Component: 100 - total flux cleaned = 0.077499 Jy ! Total flux subtracted in 100 components = 0.077499 Jy ! Clean residual min=-0.011958 max=0.018333 Jy/beam ! Clean residual mean=0.000013 rms=0.003203 Jy/beam ! Combined flux in latest and established models = 0.559554 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 45 components and 0.559554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115901Jy sigma=0.000894 ! Fit after self-cal, rms=0.114044Jy sigma=0.000881 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0253085 Jy ! Component: 100 - total flux cleaned = 0.0424721 Jy ! Total flux subtracted in 100 components = 0.0424721 Jy ! Clean residual min=-0.009096 max=0.011098 Jy/beam ! Clean residual mean=0.000007 rms=0.002395 Jy/beam ! Combined flux in latest and established models = 0.602026 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 51 components and 0.602026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105279Jy sigma=0.000806 ! Fit after self-cal, rms=0.104713Jy sigma=0.000801 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.219 mas, bmaj=7.738 mas, bpa=-3.263 degrees ! Estimated noise=858.163 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0215855 Jy ! Component: 100 - total flux cleaned = 0.0354858 Jy ! Component: 150 - total flux cleaned = 0.0451316 Jy ! Component: 200 - total flux cleaned = 0.0521539 Jy ! Total flux subtracted in 200 components = 0.0521539 Jy ! Clean residual min=-0.006635 max=0.007920 Jy/beam ! Clean residual mean=0.000006 rms=0.001827 Jy/beam ! Combined flux in latest and established models = 0.65418 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 83 components and 0.65418 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099403Jy sigma=0.000757 ! Fit after self-cal, rms=0.099176Jy sigma=0.000755 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.88 HN 0.97 KP 1.05 ! LA 1.00 MK 1.02 NL 0.93 OV 1.01 ! PT 1.00 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.04 HN 1.00 KP 1.00 ! LA 0.96 MK 1.00 NL 1.11 OV 1.01 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.96 HN 0.97 KP 0.97 ! LA 0.98 MK 1.03 NL 1.03 OV 0.95 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 4. ! A total of 45 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 0.96 KP 1.00* ! LA 1.00* MK 1.17 NL 1.00* OV 1.00* ! PT 0.98 SC 1.00* ! ! ! Fit before self-cal, rms=0.099176Jy sigma=0.000755 ! Fit after self-cal, rms=0.095279Jy sigma=0.000722 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.237 mas, bmaj=7.782 mas, bpa=-2.947 degrees ! Estimated noise=854.386 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-13.5, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00635359 Jy ! Component: 100 - total flux cleaned = 0.00621489 Jy ! Component: 150 - total flux cleaned = 0.00584365 Jy ! Component: 200 - total flux cleaned = 0.00542325 Jy ! Total flux subtracted in 200 components = 0.00542325 Jy ! Clean residual min=-0.005776 max=0.005725 Jy/beam ! Clean residual mean=-0.000012 rms=0.001384 Jy/beam ! Combined flux in latest and established models = 0.659604 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 97 components and 0.659604 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094656Jy sigma=0.000718 ! Fit after self-cal, rms=0.094612Jy sigma=0.000717 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094612Jy sigma=0.000717 ! Fit after self-cal, rms=0.092842Jy sigma=0.000697 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.234 mas, bmaj=7.794 mas, bpa=-3.047 degrees ! Estimated noise=854.953 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00234847 Jy ! Component: 100 - total flux cleaned = 0.0033988 Jy ! Component: 150 - total flux cleaned = 0.00400252 Jy ! Component: 200 - total flux cleaned = 0.00411399 Jy ! Total flux subtracted in 200 components = 0.00411399 Jy ! Clean residual min=-0.003853 max=0.003948 Jy/beam ! Clean residual mean=-0.000002 rms=0.001005 Jy/beam ! Combined flux in latest and established models = 0.663718 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 123 components and 0.663718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092685Jy sigma=0.000696 ! Fit after self-cal, rms=0.092671Jy sigma=0.000695 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000943657 Jy ! Component: 100 - total flux cleaned = 0.00116632 Jy ! Component: 150 - total flux cleaned = 0.0012573 Jy ! Component: 200 - total flux cleaned = 0.00125716 Jy ! Total flux subtracted in 200 components = 0.00125716 Jy ! Clean residual min=-0.003898 max=0.003766 Jy/beam ! Clean residual mean=-0.000002 rms=0.000986 Jy/beam ! Combined flux in latest and established models = 0.664975 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 132 components and 0.664975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092608Jy sigma=0.000695 ! Fit after self-cal, rms=0.092594Jy sigma=0.000695 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092594Jy sigma=0.000695 ! Fit after self-cal, rms=0.090428Jy sigma=0.000678 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.233 mas, bmaj=7.793 mas, bpa=-3.024 degrees ! Estimated noise=854.555 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145669 Jy ! Component: 100 - total flux cleaned = 0.0019993 Jy ! Component: 150 - total flux cleaned = 0.00209187 Jy ! Component: 200 - total flux cleaned = 0.0020909 Jy ! Total flux subtracted in 200 components = 0.0020909 Jy ! Clean residual min=-0.002253 max=0.002567 Jy/beam ! Clean residual mean=-0.000006 rms=0.000608 Jy/beam ! Combined flux in latest and established models = 0.667066 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 150 components and 0.667066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090369Jy sigma=0.000678 ! Fit after self-cal, rms=0.090367Jy sigma=0.000678 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000517875 Jy ! Component: 100 - total flux cleaned = 0.000620588 Jy ! Component: 150 - total flux cleaned = 0.000653565 Jy ! Component: 200 - total flux cleaned = 0.000740654 Jy ! Total flux subtracted in 200 components = 0.000740654 Jy ! Clean residual min=-0.002194 max=0.002479 Jy/beam ! Clean residual mean=-0.000006 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.667807 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 163 components and 0.667807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090342Jy sigma=0.000677 ! Fit after self-cal, rms=0.090337Jy sigma=0.000677 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090337Jy sigma=0.000677 ! Fit after self-cal, rms=0.090353Jy sigma=0.000677 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.351 mas, bmaj=12.65 mas, bpa=-4.075 degrees ! Estimated noise=1089.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00150073 Jy ! Component: 100 - total flux cleaned = 0.0018427 Jy ! Component: 150 - total flux cleaned = 0.0020639 Jy ! Component: 200 - total flux cleaned = 0.00208808 Jy ! Total flux subtracted in 200 components = 0.00208808 Jy ! Clean residual min=-0.002732 max=0.002979 Jy/beam ! Clean residual mean=-0.000015 rms=0.000819 Jy/beam ! Combined flux in latest and established models = 0.669895 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 191 components and 0.669895 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090340Jy sigma=0.000677 ! Fit after self-cal, rms=0.090331Jy sigma=0.000677 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000207258 Jy ! Component: 100 - total flux cleaned = 0.000280225 Jy ! Component: 150 - total flux cleaned = 0.000320835 Jy ! Component: 200 - total flux cleaned = 0.000356455 Jy ! Total flux subtracted in 200 components = 0.000356455 Jy ! Clean residual min=-0.002699 max=0.002945 Jy/beam ! Clean residual mean=-0.000015 rms=0.000810 Jy/beam ! Combined flux in latest and established models = 0.670251 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 205 components and 0.670251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090328Jy sigma=0.000677 ! Fit after self-cal, rms=0.090324Jy sigma=0.000677 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.234 mas, bmaj=7.793 mas, bpa=-2.993 degrees ! Estimated noise=854.415 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.234 x 7.793 at -2.993 degrees (North through East) ! Clean map min=-0.0021205 max=0.34861 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.73 mas, bmaj=6.877 mas, bpa=-3.829 degrees ! Estimated noise=1170.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.275812 Jy ! Component: 100 - total flux cleaned = 0.384577 Jy ! Component: 150 - total flux cleaned = 0.456626 Jy ! Component: 200 - total flux cleaned = 0.508393 Jy ! Total flux subtracted in 200 components = 0.508393 Jy ! Clean residual min=-0.012665 max=0.029040 Jy/beam ! Clean residual mean=0.000018 rms=0.003517 Jy/beam ! Combined flux in latest and established models = 0.508393 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.508393 Jy ! Inverting map and beam ! Estimated beam: bmin=3.234 mas, bmaj=7.793 mas, bpa=-2.993 degrees ! Estimated noise=854.415 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0532148 Jy ! Component: 100 - total flux cleaned = 0.0876862 Jy ! Component: 150 - total flux cleaned = 0.110403 Jy ! Component: 200 - total flux cleaned = 0.125583 Jy ! Total flux subtracted in 200 components = 0.125583 Jy ! Clean residual min=-0.004162 max=0.008240 Jy/beam ! Clean residual mean=0.000008 rms=0.001260 Jy/beam ! Combined flux in latest and established models = 0.633976 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 64 components and 0.633976 Jy ! Inverting map ! Added new window around map position (-2.5, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103365 Jy ! Component: 100 - total flux cleaned = 0.0175303 Jy ! Component: 150 - total flux cleaned = 0.0226091 Jy ! Component: 200 - total flux cleaned = 0.0263167 Jy ! Total flux subtracted in 200 components = 0.0263167 Jy ! Clean residual min=-0.002728 max=0.002737 Jy/beam ! Clean residual mean=-0.000003 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.660293 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 104 components and 0.660293 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.351 mas, bmaj=12.65 mas, bpa=-4.075 degrees ! Estimated noise=1089.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00433055 Jy ! Component: 100 - total flux cleaned = 0.00677053 Jy ! Component: 150 - total flux cleaned = 0.00760965 Jy ! Component: 200 - total flux cleaned = 0.00813631 Jy ! Total flux subtracted in 200 components = 0.00813631 Jy ! Clean residual min=-0.002826 max=0.003103 Jy/beam ! Clean residual mean=-0.000014 rms=0.000820 Jy/beam ! Combined flux in latest and established models = 0.668429 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000232698 Jy ! Component: 100 - total flux cleaned = 0.00040143 Jy ! Component: 150 - total flux cleaned = 0.000522862 Jy ! Component: 200 - total flux cleaned = 0.000660026 Jy ! Total flux subtracted in 200 components = 0.000660026 Jy ! Clean residual min=-0.002761 max=0.003090 Jy/beam ! Clean residual mean=-0.000015 rms=0.000812 Jy/beam ! Combined flux in latest and established models = 0.669089 Jy ! Adding 90 model components to the UV plane model. ! The established model now contains 187 components and 0.669089 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.234 mas, bmaj=7.793 mas, bpa=-2.993 degrees ! Estimated noise=854.415 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00108315 Jy ! Component: 100 - total flux cleaned = -0.000866618 Jy ! Component: 150 - total flux cleaned = -0.000720051 Jy ! Component: 200 - total flux cleaned = -0.000547758 Jy ! Total flux subtracted in 200 components = -0.000547758 Jy ! Clean residual min=-0.002281 max=0.002460 Jy/beam ! Clean residual mean=-0.000007 rms=0.000592 Jy/beam ! Combined flux in latest and established models = 0.668541 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 204 components and 0.668541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090362Jy sigma=0.000677 ! Fit after self-cal, rms=0.090349Jy sigma=0.000677 wmodel J1232-0224_S_2017_08_12_pus_map.mod ! Writing 204 model components to file: J1232-0224_S_2017_08_12_pus_map.mod wobs J1232-0224_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J1232-0224_S_2017_08_12_pus_uvs.fits wwins J1232-0224_S_2017_08_12_pus_map.win ! wwins: Wrote 5 windows to J1232-0224_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000151703 Jy ! Component: 100 - total flux cleaned = -0.000356118 Jy ! Component: 150 - total flux cleaned = -0.000509856 Jy ! Component: 200 - total flux cleaned = -0.000473219 Jy ! Component: 250 - total flux cleaned = -0.000438313 Jy ! Component: 300 - total flux cleaned = -0.00047307 Jy ! Component: 350 - total flux cleaned = -0.000440268 Jy ! Component: 400 - total flux cleaned = -0.000440269 Jy ! Component: 450 - total flux cleaned = -0.000440095 Jy ! Component: 500 - total flux cleaned = -0.000532499 Jy ! Component: 550 - total flux cleaned = -0.000563174 Jy ! Component: 600 - total flux cleaned = -0.000682221 Jy ! Component: 650 - total flux cleaned = -0.000740781 Jy ! Component: 700 - total flux cleaned = -0.000768875 Jy ! Component: 750 - total flux cleaned = -0.000852459 Jy ! Component: 800 - total flux cleaned = -0.000769052 Jy ! Component: 850 - total flux cleaned = -0.00079678 Jy ! Component: 900 - total flux cleaned = -0.0007964 Jy ! Component: 950 - total flux cleaned = -0.000716546 Jy ! Component: 1000 - total flux cleaned = -0.000769127 Jy ! Component: 1050 - total flux cleaned = -0.000640372 Jy ! Component: 1100 - total flux cleaned = -0.000640683 Jy ! Component: 1150 - total flux cleaned = -0.000640907 Jy ! Component: 1200 - total flux cleaned = -0.000616345 Jy ! Component: 1250 - total flux cleaned = -0.000616859 Jy ! Component: 1300 - total flux cleaned = -0.000567831 Jy ! Component: 1350 - total flux cleaned = -0.000592357 Jy ! Component: 1400 - total flux cleaned = -0.000616532 Jy ! Component: 1450 - total flux cleaned = -0.000522121 Jy ! Component: 1500 - total flux cleaned = -0.000546106 Jy ! Component: 1550 - total flux cleaned = -0.000500177 Jy ! Component: 1600 - total flux cleaned = -0.000546232 Jy ! Component: 1650 - total flux cleaned = -0.000568645 Jy ! Component: 1700 - total flux cleaned = -0.000568614 Jy ! Component: 1750 - total flux cleaned = -0.000524254 Jy ! Component: 1800 - total flux cleaned = -0.000502446 Jy ! Component: 1850 - total flux cleaned = -0.000480561 Jy ! Component: 1900 - total flux cleaned = -0.000394206 Jy ! Component: 1950 - total flux cleaned = -0.000373147 Jy ! Component: 2000 - total flux cleaned = -0.000373048 Jy ! Component: 2050 - total flux cleaned = -0.00039411 Jy ! Component: 2100 - total flux cleaned = -0.000269654 Jy ! Component: 2150 - total flux cleaned = -0.000187425 Jy ! Component: 2200 - total flux cleaned = -0.000208013 Jy ! Component: 2250 - total flux cleaned = -0.000208249 Jy ! Component: 2300 - total flux cleaned = -0.000147723 Jy ! Component: 2350 - total flux cleaned = -0.000147627 Jy ! Component: 2400 - total flux cleaned = -0.00010785 Jy ! Component: 2450 - total flux cleaned = -4.90644e-05 Jy ! Component: 2500 - total flux cleaned = 4.78576e-05 Jy ! Component: 2550 - total flux cleaned = -2.92717e-05 Jy ! Component: 2600 - total flux cleaned = 2.84095e-05 Jy ! Component: 2650 - total flux cleaned = 9.21599e-06 Jy ! Component: 2700 - total flux cleaned = 6.54292e-05 Jy ! Component: 2750 - total flux cleaned = 4.70054e-05 Jy ! Component: 2800 - total flux cleaned = 6.57175e-05 Jy ! Component: 2850 - total flux cleaned = 0.000121048 Jy ! Component: 2900 - total flux cleaned = 0.000175759 Jy ! Component: 2950 - total flux cleaned = 0.000211946 Jy ! Component: 3000 - total flux cleaned = 0.00024784 Jy ! Component: 3050 - total flux cleaned = 0.000194122 Jy ! Component: 3100 - total flux cleaned = 0.000265344 Jy ! Component: 3150 - total flux cleaned = 0.000247737 Jy ! Component: 3200 - total flux cleaned = 0.000283077 Jy ! Component: 3250 - total flux cleaned = 0.000352526 Jy ! Component: 3300 - total flux cleaned = 0.000369812 Jy ! Component: 3350 - total flux cleaned = 0.00042121 Jy ! Component: 3400 - total flux cleaned = 0.000489124 Jy ! Component: 3450 - total flux cleaned = 0.000472188 Jy ! Component: 3500 - total flux cleaned = 0.000522713 Jy ! Component: 3550 - total flux cleaned = 0.000656168 Jy ! Component: 3600 - total flux cleaned = 0.000656093 Jy ! Component: 3650 - total flux cleaned = 0.000705464 Jy ! Component: 3700 - total flux cleaned = 0.000803495 Jy ! Component: 3750 - total flux cleaned = 0.00085228 Jy ! Component: 3800 - total flux cleaned = 0.000884734 Jy ! Component: 3850 - total flux cleaned = 0.000916925 Jy ! Component: 3900 - total flux cleaned = 0.00104455 Jy ! Component: 3950 - total flux cleaned = 0.00109187 Jy ! Component: 4000 - total flux cleaned = 0.00113923 Jy ! Component: 4050 - total flux cleaned = 0.00118609 Jy ! Total flux subtracted in 4096 components = 0.00126386 Jy ! Clean residual min=-0.000820 max=0.000776 Jy/beam ! Clean residual mean=-0.000004 rms=0.000293 Jy/beam ! Combined flux in latest and established models = 0.669805 Jy keep ! Adding 293 model components to the UV plane model. ! The established model now contains 497 components and 0.669805 Jy ![Exited script file: muppet] wmap "J1232-0224_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.234 x 7.793 at -2.993 degrees (North through East) ! Clean map min=-0.0020115 max=0.34934 Jy/beam ! Writing clean map to FITS file: J1232-0224_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.349344 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000291126 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.250005 0.250005 0.50001 1.00002 2.00004 4.00008 8.00016 16.0003 32.0006 64.0013 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.349 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.234 x 7.793 at -2.993 degrees (North through East) ! Clean map min=-0.0020115 max=0.34934 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1232-0224_S_2017_08_12_pus_uvs.log closed on Fri May 10 14:59:46 2019