! Started logfile: J1231-3533_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:13:41 2019 obs J1231-3533_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J1231-3533_S_2017_01_16_pus_uva.fits ! AN table 1: 146 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.585693 visibilities/baseline/integration-bin. ! Found source: J1231-3533 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 15392 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1231-3533_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 328 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 328 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 328 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 579 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.991578Jy sigma=0.005963 ! Fit after self-cal, rms=0.936960Jy sigma=0.005683 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.138 mas, bmaj=12.02 mas, bpa=16.17 degrees ! Estimated noise=2118.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0513098 Jy ! Component: 100 - total flux cleaned = 0.0628533 Jy ! Total flux subtracted in 100 components = 0.0628533 Jy ! Clean residual min=-0.004123 max=0.004626 Jy/beam ! Clean residual mean=-0.000035 rms=0.001124 Jy/beam ! Combined flux in latest and established models = 0.0628533 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0628533 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121912Jy sigma=0.000630 ! Fit after self-cal, rms=0.121023Jy sigma=0.000625 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.146 mas, bmaj=15.56 mas, bpa=12.93 degrees ! Estimated noise=1020.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00738636 Jy ! Component: 100 - total flux cleaned = 0.010095 Jy ! Component: 150 - total flux cleaned = 0.0109519 Jy ! Component: 200 - total flux cleaned = 0.0111005 Jy ! Total flux subtracted in 200 components = 0.0111005 Jy ! Clean residual min=-0.002697 max=0.002701 Jy/beam ! Clean residual mean=-0.000019 rms=0.000736 Jy/beam ! Combined flux in latest and established models = 0.0739537 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 47 components and 0.0739537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120537Jy sigma=0.000623 ! Fit after self-cal, rms=0.120543Jy sigma=0.000623 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.02 HN 0.95 KP 1.02 ! LA 1.02 MK 1.00* NL 0.89 OV 1.04 ! PT 1.03 SC 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.10 HN 1.00 KP 1.02 ! LA 0.93 MK 1.00* NL 1.02 OV 0.99 ! PT 0.98 SC 1.11 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.07 HN 0.97 KP 1.04 ! LA 0.96 MK 1.00* NL 0.92 OV 0.97 ! PT 1.01 SC 1.16 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.04 HN 0.88 KP 0.97 ! LA 1.00 MK 1.00* NL 1.00* OV 0.96 ! PT 1.03 SC 0.73 ! ! ! Fit before self-cal, rms=0.120543Jy sigma=0.000623 ! Fit after self-cal, rms=0.113807Jy sigma=0.000621 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.177 mas, bmaj=15.53 mas, bpa=12.6 degrees ! Estimated noise=1017.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00099775 Jy ! Component: 100 - total flux cleaned = 0.00108482 Jy ! Component: 150 - total flux cleaned = 0.00116086 Jy ! Component: 200 - total flux cleaned = 0.0012132 Jy ! Total flux subtracted in 200 components = 0.0012132 Jy ! Clean residual min=-0.002909 max=0.002325 Jy/beam ! Clean residual mean=-0.000006 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.0751669 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 61 components and 0.0751669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113794Jy sigma=0.000621 ! Fit after self-cal, rms=0.113596Jy sigma=0.000621 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113596Jy sigma=0.000621 ! Fit after self-cal, rms=0.111057Jy sigma=0.000620 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.17 mas, bmaj=15.45 mas, bpa=12.56 degrees ! Estimated noise=1017.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000823163 Jy ! Component: 100 - total flux cleaned = 0.000977815 Jy ! Component: 150 - total flux cleaned = 0.00102726 Jy ! Component: 200 - total flux cleaned = 0.00107329 Jy ! Total flux subtracted in 200 components = 0.00107329 Jy ! Clean residual min=-0.002719 max=0.002302 Jy/beam ! Clean residual mean=-0.000005 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.0762402 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 70 components and 0.0762402 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111047Jy sigma=0.000620 ! Fit after self-cal, rms=0.110978Jy sigma=0.000620 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00012234 Jy ! Component: 100 - total flux cleaned = 0.000139143 Jy ! Component: 150 - total flux cleaned = 0.000169788 Jy ! Component: 200 - total flux cleaned = 0.000197202 Jy ! Total flux subtracted in 200 components = 0.000197202 Jy ! Clean residual min=-0.002714 max=0.002428 Jy/beam ! Clean residual mean=-0.000005 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 0.0764374 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 75 components and 0.0764374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110974Jy sigma=0.000620 ! Fit after self-cal, rms=0.110974Jy sigma=0.000620 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110974Jy sigma=0.000620 ! Fit after self-cal, rms=0.110051Jy sigma=0.000620 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.155 mas, bmaj=15.36 mas, bpa=12.5 degrees ! Estimated noise=1017.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000689753 Jy ! Component: 100 - total flux cleaned = 0.000761261 Jy ! Component: 150 - total flux cleaned = 0.000791769 Jy ! Component: 200 - total flux cleaned = 0.000818995 Jy ! Total flux subtracted in 200 components = 0.000818995 Jy ! Clean residual min=-0.002670 max=0.002280 Jy/beam ! Clean residual mean=-0.000005 rms=0.000566 Jy/beam ! Combined flux in latest and established models = 0.0772564 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 75 components and 0.0772565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110043Jy sigma=0.000620 ! Fit after self-cal, rms=0.110014Jy sigma=0.000620 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.14073e-05 Jy ! Component: 100 - total flux cleaned = 9.67711e-05 Jy ! Component: 150 - total flux cleaned = 0.000123616 Jy ! Component: 200 - total flux cleaned = 0.000147681 Jy ! Total flux subtracted in 200 components = 0.000147681 Jy ! Clean residual min=-0.002682 max=0.002345 Jy/beam ! Clean residual mean=-0.000005 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 0.0774041 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 77 components and 0.0774041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110010Jy sigma=0.000620 ! Fit after self-cal, rms=0.110010Jy sigma=0.000620 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110010Jy sigma=0.000620 ! Fit after self-cal, rms=0.109540Jy sigma=0.000620 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.554 mas, bmaj=26.95 mas, bpa=4.359 degrees ! Estimated noise=1145.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000707665 Jy ! Component: 100 - total flux cleaned = 0.000770655 Jy ! Component: 150 - total flux cleaned = 0.00080672 Jy ! Component: 200 - total flux cleaned = 0.000828001 Jy ! Total flux subtracted in 200 components = 0.000828001 Jy ! Clean residual min=-0.002251 max=0.001824 Jy/beam ! Clean residual mean=-0.000007 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.0782321 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 79 components and 0.0782321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109537Jy sigma=0.000620 ! Fit after self-cal, rms=0.109519Jy sigma=0.000620 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.53609e-06 Jy ! Component: 100 - total flux cleaned = 1.89807e-05 Jy ! Component: 150 - total flux cleaned = 3.00834e-05 Jy ! Component: 200 - total flux cleaned = 4.97734e-05 Jy ! Total flux subtracted in 200 components = 4.97734e-05 Jy ! Clean residual min=-0.002262 max=0.001797 Jy/beam ! Clean residual mean=-0.000007 rms=0.000614 Jy/beam ! Combined flux in latest and established models = 0.0782819 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 80 components and 0.0782819 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109519Jy sigma=0.000620 ! Fit after self-cal, rms=0.109514Jy sigma=0.000620 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.144 mas, bmaj=15.28 mas, bpa=12.44 degrees ! Estimated noise=1016.74 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.144 x 15.28 at 12.44 degrees (North through East) ! Clean map min=-0.0026083 max=0.068337 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.126 mas, bmaj=11.76 mas, bpa=15.92 degrees ! Estimated noise=2073.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0514978 Jy ! Component: 100 - total flux cleaned = 0.0634401 Jy ! Component: 150 - total flux cleaned = 0.0681937 Jy ! Component: 200 - total flux cleaned = 0.0709803 Jy ! Total flux subtracted in 200 components = 0.0709803 Jy ! Clean residual min=-0.003811 max=0.004477 Jy/beam ! Clean residual mean=-0.000024 rms=0.001037 Jy/beam ! Combined flux in latest and established models = 0.0709804 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.0709804 Jy ! Inverting map and beam ! Estimated beam: bmin=4.144 mas, bmaj=15.28 mas, bpa=12.44 degrees ! Estimated noise=1016.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00426895 Jy ! Component: 100 - total flux cleaned = 0.0062457 Jy ! Component: 150 - total flux cleaned = 0.00686857 Jy ! Component: 200 - total flux cleaned = 0.00700443 Jy ! Total flux subtracted in 200 components = 0.00700443 Jy ! Clean residual min=-0.002819 max=0.002674 Jy/beam ! Clean residual mean=-0.000006 rms=0.000605 Jy/beam ! Combined flux in latest and established models = 0.0779848 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 45 components and 0.0779848 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.554 mas, bmaj=26.95 mas, bpa=4.359 degrees ! Estimated noise=1145.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000157799 Jy ! Component: 100 - total flux cleaned = 0.000275024 Jy ! Component: 150 - total flux cleaned = 0.000298625 Jy ! Component: 200 - total flux cleaned = 0.000320159 Jy ! Total flux subtracted in 200 components = 0.000320159 Jy ! Clean residual min=-0.002402 max=0.002035 Jy/beam ! Clean residual mean=-0.000007 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.078305 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.49821e-07 Jy ! Component: 100 - total flux cleaned = 8.26543e-07 Jy ! Component: 150 - total flux cleaned = 1.65668e-05 Jy ! Component: 200 - total flux cleaned = 3.11995e-05 Jy ! Total flux subtracted in 200 components = 3.11995e-05 Jy ! Clean residual min=-0.002350 max=0.001986 Jy/beam ! Clean residual mean=-0.000006 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 0.0783362 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 58 components and 0.0783362 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.144 mas, bmaj=15.28 mas, bpa=12.44 degrees ! Estimated noise=1016.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.22964e-05 Jy ! Component: 100 - total flux cleaned = -6.03672e-05 Jy ! Component: 150 - total flux cleaned = -4.50756e-05 Jy ! Component: 200 - total flux cleaned = -2.9827e-05 Jy ! Total flux subtracted in 200 components = -2.9827e-05 Jy ! Clean residual min=-0.002711 max=0.002503 Jy/beam ! Clean residual mean=-0.000004 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.0783063 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 71 components and 0.0783063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109519Jy sigma=0.000620 ! Fit after self-cal, rms=0.109520Jy sigma=0.000620 wmodel J1231-3533_S_2017_01_16_pus_map.mod ! Writing 71 model components to file: J1231-3533_S_2017_01_16_pus_map.mod wobs J1231-3533_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J1231-3533_S_2017_01_16_pus_uvs.fits wwins J1231-3533_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J1231-3533_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000123468 Jy ! Component: 100 - total flux cleaned = -0.000356438 Jy ! Component: 150 - total flux cleaned = -0.000427407 Jy ! Component: 200 - total flux cleaned = -0.000325716 Jy ! Component: 250 - total flux cleaned = -0.000356938 Jy ! Component: 300 - total flux cleaned = -0.000386785 Jy ! Component: 350 - total flux cleaned = -0.000502262 Jy ! Component: 400 - total flux cleaned = -0.000585255 Jy ! Component: 450 - total flux cleaned = -0.00063847 Jy ! Component: 500 - total flux cleaned = -0.000740324 Jy ! Component: 550 - total flux cleaned = -0.000690948 Jy ! Component: 600 - total flux cleaned = -0.000812324 Jy ! Component: 650 - total flux cleaned = -0.00078957 Jy ! Component: 700 - total flux cleaned = -0.000927101 Jy ! Component: 750 - total flux cleaned = -0.00103833 Jy ! Component: 800 - total flux cleaned = -0.0010599 Jy ! Component: 850 - total flux cleaned = -0.00106014 Jy ! Component: 900 - total flux cleaned = -0.00101881 Jy ! Component: 950 - total flux cleaned = -0.00103936 Jy ! Component: 1000 - total flux cleaned = -0.00109915 Jy ! Component: 1050 - total flux cleaned = -0.00111885 Jy ! Component: 1100 - total flux cleaned = -0.00117678 Jy ! Component: 1150 - total flux cleaned = -0.00125255 Jy ! Component: 1200 - total flux cleaned = -0.00125264 Jy ! Component: 1250 - total flux cleaned = -0.00127081 Jy ! Component: 1300 - total flux cleaned = -0.00127072 Jy ! Component: 1350 - total flux cleaned = -0.00128858 Jy ! Component: 1400 - total flux cleaned = -0.00134104 Jy ! Component: 1450 - total flux cleaned = -0.0013924 Jy ! Component: 1500 - total flux cleaned = -0.0014432 Jy ! Component: 1550 - total flux cleaned = -0.00145988 Jy ! Component: 1600 - total flux cleaned = -0.00154233 Jy ! Component: 1650 - total flux cleaned = -0.00162355 Jy ! Component: 1700 - total flux cleaned = -0.00168765 Jy ! Component: 1750 - total flux cleaned = -0.00173502 Jy ! Component: 1800 - total flux cleaned = -0.00179732 Jy ! Component: 1850 - total flux cleaned = -0.00181261 Jy ! Component: 1900 - total flux cleaned = -0.0018129 Jy ! Component: 1950 - total flux cleaned = -0.00188851 Jy ! Component: 2000 - total flux cleaned = -0.00187357 Jy ! Component: 2050 - total flux cleaned = -0.00190304 Jy ! Component: 2100 - total flux cleaned = -0.00194671 Jy ! Component: 2150 - total flux cleaned = -0.00196097 Jy ! Component: 2200 - total flux cleaned = -0.00200365 Jy ! Component: 2250 - total flux cleaned = -0.00198965 Jy ! Component: 2300 - total flux cleaned = -0.00205927 Jy ! Component: 2350 - total flux cleaned = -0.0020456 Jy ! Component: 2400 - total flux cleaned = -0.0021408 Jy ! Component: 2450 - total flux cleaned = -0.00207337 Jy ! Component: 2500 - total flux cleaned = -0.00205994 Jy ! Component: 2550 - total flux cleaned = -0.00200693 Jy ! Component: 2600 - total flux cleaned = -0.00199394 Jy ! Component: 2650 - total flux cleaned = -0.00199409 Jy ! Component: 2700 - total flux cleaned = -0.00196816 Jy ! Component: 2750 - total flux cleaned = -0.001968 Jy ! Component: 2800 - total flux cleaned = -0.00191737 Jy ! Component: 2850 - total flux cleaned = -0.00187975 Jy ! Component: 2900 - total flux cleaned = -0.00185481 Jy ! Component: 2950 - total flux cleaned = -0.00184239 Jy ! Component: 3000 - total flux cleaned = -0.00183024 Jy ! Component: 3050 - total flux cleaned = -0.00174535 Jy ! Component: 3100 - total flux cleaned = -0.00178129 Jy ! Component: 3150 - total flux cleaned = -0.00172162 Jy ! Component: 3200 - total flux cleaned = -0.00167445 Jy ! Component: 3250 - total flux cleaned = -0.00167451 Jy ! Component: 3300 - total flux cleaned = -0.00165114 Jy ! Component: 3350 - total flux cleaned = -0.00160505 Jy ! Component: 3400 - total flux cleaned = -0.00157068 Jy ! Component: 3450 - total flux cleaned = -0.0015365 Jy ! Component: 3500 - total flux cleaned = -0.00147985 Jy ! Component: 3550 - total flux cleaned = -0.00143501 Jy ! Component: 3600 - total flux cleaned = -0.00141265 Jy ! Component: 3650 - total flux cleaned = -0.00135727 Jy ! Component: 3700 - total flux cleaned = -0.00130236 Jy ! Component: 3750 - total flux cleaned = -0.00129147 Jy ! Component: 3800 - total flux cleaned = -0.0012806 Jy ! Component: 3850 - total flux cleaned = -0.00121596 Jy ! Component: 3900 - total flux cleaned = -0.00115196 Jy ! Component: 3950 - total flux cleaned = -0.00114127 Jy ! Component: 4000 - total flux cleaned = -0.00108852 Jy ! Component: 4050 - total flux cleaned = -0.00107806 Jy ! Total flux subtracted in 4096 components = -0.00102605 Jy ! Clean residual min=-0.000672 max=0.000570 Jy/beam ! Clean residual mean=-0.000003 rms=0.000194 Jy/beam ! Combined flux in latest and established models = 0.0772803 Jy keep ! Adding 230 model components to the UV plane model. ! The established model now contains 301 components and 0.0772803 Jy ![Exited script file: muppet] wmap "J1231-3533_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.144 x 15.28 at 12.44 degrees (North through East) ! Clean map min=-0.0013576 max=0.067541 Jy/beam ! Writing clean map to FITS file: J1231-3533_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0675412 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000188303 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.836389 0.836389 1.67278 3.34556 6.69111 13.3822 26.7645 53.5289 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.067 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.144 x 15.28 at 12.44 degrees (North through East) ! Clean map min=-0.0013576 max=0.067541 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1231-3533_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:13:46 2019