! Started logfile: J1231+6414_S_2017_10_09_pus_uvs.log on Sun May 12 13:12:38 2019 obs J1231+6414_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1231+6414_S_2017_10_09_pus_uva.fits ! AN table 1: 146 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.721271 visibilities/baseline/integration-bin. ! Found source: J1231+6414 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 15164 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1231+6414_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 212 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 388 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 245 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 849 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.006755Jy sigma=0.008113 ! Fit after self-cal, rms=0.953359Jy sigma=0.007716 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.907 mas, bmaj=5.972 mas, bpa=-64.15 degrees ! Estimated noise=1613.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0382045 Jy ! Component: 100 - total flux cleaned = 0.0471389 Jy ! Total flux subtracted in 100 components = 0.0471389 Jy ! Clean residual min=-0.003997 max=0.004711 Jy/beam ! Clean residual mean=-0.000002 rms=0.001088 Jy/beam ! Combined flux in latest and established models = 0.0471389 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0471389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090154Jy sigma=0.000645 ! Fit after self-cal, rms=0.088326Jy sigma=0.000631 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.738 mas, bmaj=7.316 mas, bpa=-64.41 degrees ! Estimated noise=887.549 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00546803 Jy ! Component: 100 - total flux cleaned = 0.00773323 Jy ! Component: 150 - total flux cleaned = 0.00887342 Jy ! Component: 200 - total flux cleaned = 0.00910647 Jy ! Total flux subtracted in 200 components = 0.00910647 Jy ! Clean residual min=-0.002892 max=0.002649 Jy/beam ! Clean residual mean=0.000009 rms=0.000708 Jy/beam ! Combined flux in latest and established models = 0.0562454 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 30 components and 0.0562454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087894Jy sigma=0.000629 ! Fit after self-cal, rms=0.087819Jy sigma=0.000628 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.89 HN 1.02 KP 1.07 ! LA 1.19 MK 1.06 NL 0.77 OV 1.00* ! PT 1.01 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.08 HN 1.01 KP 0.95 ! LA 0.99 MK 0.94 NL 1.00* OV 1.00* ! PT 1.14 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.11 HN 1.13 KP 0.86 ! LA 0.93 MK 0.95 NL 0.83 OV 1.00* ! PT 1.07 ! ! ! Correcting IF 4. ! A total of 285 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 0.83 KP 1.00* ! LA 0.78 MK 1.00* NL 1.00* OV 1.00* ! PT 0.92 ! ! ! Fit before self-cal, rms=0.087819Jy sigma=0.000628 ! Fit after self-cal, rms=0.084442Jy sigma=0.000629 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.675 mas, bmaj=7.168 mas, bpa=-64.33 degrees ! Estimated noise=906.532 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000458742 Jy ! Component: 100 - total flux cleaned = 0.000497776 Jy ! Component: 150 - total flux cleaned = 0.000464861 Jy ! Component: 200 - total flux cleaned = 0.000435231 Jy ! Total flux subtracted in 200 components = 0.000435231 Jy ! Clean residual min=-0.002283 max=0.002470 Jy/beam ! Clean residual mean=0.000006 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.0566806 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 37 components and 0.0566806 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084430Jy sigma=0.000629 ! Fit after self-cal, rms=0.084291Jy sigma=0.000628 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084291Jy sigma=0.000628 ! Fit after self-cal, rms=0.083472Jy sigma=0.000626 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.665 mas, bmaj=7.124 mas, bpa=-64.75 degrees ! Estimated noise=902.897 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000305891 Jy ! Component: 100 - total flux cleaned = 0.000379805 Jy ! Component: 150 - total flux cleaned = 0.000434219 Jy ! Component: 200 - total flux cleaned = 0.000469567 Jy ! Total flux subtracted in 200 components = 0.000469567 Jy ! Clean residual min=-0.002321 max=0.002566 Jy/beam ! Clean residual mean=0.000003 rms=0.000544 Jy/beam ! Combined flux in latest and established models = 0.0571502 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 44 components and 0.0571502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083469Jy sigma=0.000626 ! Fit after self-cal, rms=0.083663Jy sigma=0.000626 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5, -99.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127602 Jy ! Component: 100 - total flux cleaned = 0.00163443 Jy ! Component: 150 - total flux cleaned = 0.00177123 Jy ! Component: 200 - total flux cleaned = 0.00181772 Jy ! Total flux subtracted in 200 components = 0.00181772 Jy ! Clean residual min=-0.002021 max=0.001850 Jy/beam ! Clean residual mean=0.000003 rms=0.000484 Jy/beam ! Combined flux in latest and established models = 0.0589679 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 64 components and 0.0589679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083614Jy sigma=0.000625 ! Fit after self-cal, rms=0.083524Jy sigma=0.000625 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083524Jy sigma=0.000625 ! Fit after self-cal, rms=0.084413Jy sigma=0.000625 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.651 mas, bmaj=7.123 mas, bpa=-64.74 degrees ! Estimated noise=902.969 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000959332 Jy ! Component: 100 - total flux cleaned = 0.00108229 Jy ! Component: 150 - total flux cleaned = 0.00126652 Jy ! Component: 200 - total flux cleaned = 0.00142601 Jy ! Total flux subtracted in 200 components = 0.00142601 Jy ! Clean residual min=-0.001985 max=0.001746 Jy/beam ! Clean residual mean=0.000001 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.0603939 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 77 components and 0.0603939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084378Jy sigma=0.000624 ! Fit after self-cal, rms=0.084432Jy sigma=0.000624 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00065932 Jy ! Component: 100 - total flux cleaned = 0.000784026 Jy ! Component: 150 - total flux cleaned = 0.000826172 Jy ! Component: 200 - total flux cleaned = 0.000882655 Jy ! Total flux subtracted in 200 components = 0.000882655 Jy ! Clean residual min=-0.001945 max=0.001753 Jy/beam ! Clean residual mean=0.000002 rms=0.000452 Jy/beam ! Combined flux in latest and established models = 0.0612766 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 87 components and 0.0612766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084413Jy sigma=0.000624 ! Fit after self-cal, rms=0.084387Jy sigma=0.000624 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084387Jy sigma=0.000624 ! Fit after self-cal, rms=0.084679Jy sigma=0.000624 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.081 mas, bmaj=11.33 mas, bpa=89.3 degrees ! Estimated noise=1130.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102648 Jy ! Component: 100 - total flux cleaned = 0.00129184 Jy ! Component: 150 - total flux cleaned = 0.00141569 Jy ! Component: 200 - total flux cleaned = 0.00150241 Jy ! Total flux subtracted in 200 components = 0.00150241 Jy ! Clean residual min=-0.002260 max=0.002227 Jy/beam ! Clean residual mean=-0.000000 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.062779 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 90 components and 0.062779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084667Jy sigma=0.000624 ! Fit after self-cal, rms=0.084660Jy sigma=0.000624 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00068079 Jy ! Component: 100 - total flux cleaned = 0.000759504 Jy ! Component: 150 - total flux cleaned = 0.000775165 Jy ! Component: 200 - total flux cleaned = 0.00077604 Jy ! Total flux subtracted in 200 components = 0.00077604 Jy ! Clean residual min=-0.002293 max=0.002230 Jy/beam ! Clean residual mean=0.000003 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.063555 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 93 components and 0.063555 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084655Jy sigma=0.000624 ! Fit after self-cal, rms=0.084641Jy sigma=0.000624 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.642 mas, bmaj=7.127 mas, bpa=-64.79 degrees ! Estimated noise=905.069 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.642 x 7.127 at -64.79 degrees (North through East) ! Clean map min=-0.0024805 max=0.050957 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.919 mas, bmaj=5.974 mas, bpa=-65.01 degrees ! Estimated noise=1566.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0393332 Jy ! Component: 100 - total flux cleaned = 0.0486427 Jy ! Component: 150 - total flux cleaned = 0.0518074 Jy ! Component: 200 - total flux cleaned = 0.0542031 Jy ! Total flux subtracted in 200 components = 0.0542031 Jy ! Clean residual min=-0.003684 max=0.003302 Jy/beam ! Clean residual mean=-0.000005 rms=0.000860 Jy/beam ! Combined flux in latest and established models = 0.0542031 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.0542031 Jy ! Inverting map and beam ! Estimated beam: bmin=3.642 mas, bmaj=7.127 mas, bpa=-64.79 degrees ! Estimated noise=905.069 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00339082 Jy ! Component: 100 - total flux cleaned = 0.00534679 Jy ! Component: 150 - total flux cleaned = 0.00620697 Jy ! Component: 200 - total flux cleaned = 0.00671629 Jy ! Total flux subtracted in 200 components = 0.00671629 Jy ! Clean residual min=-0.001918 max=0.001867 Jy/beam ! Clean residual mean=-0.000003 rms=0.000484 Jy/beam ! Combined flux in latest and established models = 0.0609194 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 57 components and 0.0609194 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.081 mas, bmaj=11.33 mas, bpa=89.3 degrees ! Estimated noise=1130.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152801 Jy ! Component: 100 - total flux cleaned = 0.00193686 Jy ! Component: 150 - total flux cleaned = 0.00214635 Jy ! Component: 200 - total flux cleaned = 0.00234705 Jy ! Total flux subtracted in 200 components = 0.00234705 Jy ! Clean residual min=-0.002351 max=0.002198 Jy/beam ! Clean residual mean=0.000001 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.0632664 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000146848 Jy ! Component: 100 - total flux cleaned = 0.000287757 Jy ! Component: 150 - total flux cleaned = 0.000377531 Jy ! Component: 200 - total flux cleaned = 0.000455846 Jy ! Total flux subtracted in 200 components = 0.000455846 Jy ! Clean residual min=-0.002345 max=0.002137 Jy/beam ! Clean residual mean=0.000003 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.0637223 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 88 components and 0.0637223 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.642 mas, bmaj=7.127 mas, bpa=-64.79 degrees ! Estimated noise=905.069 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.47168e-05 Jy ! Component: 100 - total flux cleaned = -0.000134342 Jy ! Component: 150 - total flux cleaned = -0.00017319 Jy ! Component: 200 - total flux cleaned = -0.000173648 Jy ! Total flux subtracted in 200 components = -0.000173648 Jy ! Clean residual min=-0.001998 max=0.001794 Jy/beam ! Clean residual mean=0.000001 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.0635486 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 105 components and 0.0635486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084639Jy sigma=0.000624 ! Fit after self-cal, rms=0.084621Jy sigma=0.000623 wmodel J1231+6414_S_2017_10_09_pus_map.mod ! Writing 105 model components to file: J1231+6414_S_2017_10_09_pus_map.mod wobs J1231+6414_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1231+6414_S_2017_10_09_pus_uvs.fits wwins J1231+6414_S_2017_10_09_pus_map.win ! wwins: Wrote 2 windows to J1231+6414_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000450858 Jy ! Component: 100 - total flux cleaned = -0.000761524 Jy ! Component: 150 - total flux cleaned = -0.000733204 Jy ! Component: 200 - total flux cleaned = -0.000760719 Jy ! Component: 250 - total flux cleaned = -0.000786904 Jy ! Component: 300 - total flux cleaned = -0.000786992 Jy ! Component: 350 - total flux cleaned = -0.000787249 Jy ! Component: 400 - total flux cleaned = -0.000834525 Jy ! Component: 450 - total flux cleaned = -0.000810888 Jy ! Component: 500 - total flux cleaned = -0.000743504 Jy ! Component: 550 - total flux cleaned = -0.000700162 Jy ! Component: 600 - total flux cleaned = -0.000636313 Jy ! Component: 650 - total flux cleaned = -0.000615491 Jy ! Component: 700 - total flux cleaned = -0.000575149 Jy ! Component: 750 - total flux cleaned = -0.000535578 Jy ! Component: 800 - total flux cleaned = -0.000515965 Jy ! Component: 850 - total flux cleaned = -0.000515568 Jy ! Component: 900 - total flux cleaned = -0.000496681 Jy ! Component: 950 - total flux cleaned = -0.000515206 Jy ! Component: 1000 - total flux cleaned = -0.000533387 Jy ! Component: 1050 - total flux cleaned = -0.000533142 Jy ! Component: 1100 - total flux cleaned = -0.000515534 Jy ! Component: 1150 - total flux cleaned = -0.00051543 Jy ! Component: 1200 - total flux cleaned = -0.000498769 Jy ! Component: 1250 - total flux cleaned = -0.000433039 Jy ! Component: 1300 - total flux cleaned = -0.000400982 Jy ! Component: 1350 - total flux cleaned = -0.000385078 Jy ! Component: 1400 - total flux cleaned = -0.000385243 Jy ! Component: 1450 - total flux cleaned = -0.000416383 Jy ! Component: 1500 - total flux cleaned = -0.000370337 Jy ! Component: 1550 - total flux cleaned = -0.000370434 Jy ! Component: 1600 - total flux cleaned = -0.000385431 Jy ! Component: 1650 - total flux cleaned = -0.000385499 Jy ! Component: 1700 - total flux cleaned = -0.000429159 Jy ! Component: 1750 - total flux cleaned = -0.000443353 Jy ! Component: 1800 - total flux cleaned = -0.000429194 Jy ! Component: 1850 - total flux cleaned = -0.000415369 Jy ! Component: 1900 - total flux cleaned = -0.000415449 Jy ! Component: 1950 - total flux cleaned = -0.000415435 Jy ! Component: 2000 - total flux cleaned = -0.000374629 Jy ! Component: 2050 - total flux cleaned = -0.000361223 Jy ! Component: 2100 - total flux cleaned = -0.000387961 Jy ! Component: 2150 - total flux cleaned = -0.000361288 Jy ! Component: 2200 - total flux cleaned = -0.00028283 Jy ! Component: 2250 - total flux cleaned = -0.000308862 Jy ! Component: 2300 - total flux cleaned = -0.000257436 Jy ! Component: 2350 - total flux cleaned = -0.000181069 Jy ! Component: 2400 - total flux cleaned = -0.000155947 Jy ! Component: 2450 - total flux cleaned = -0.000143328 Jy ! Component: 2500 - total flux cleaned = -0.000105938 Jy ! Component: 2550 - total flux cleaned = -4.42797e-05 Jy ! Component: 2600 - total flux cleaned = -1.9842e-05 Jy ! Component: 2650 - total flux cleaned = 2.87745e-05 Jy ! Component: 2700 - total flux cleaned = 4.08643e-05 Jy ! Component: 2750 - total flux cleaned = 4.08718e-05 Jy ! Component: 2800 - total flux cleaned = 7.65711e-05 Jy ! Component: 2850 - total flux cleaned = 0.000100201 Jy ! Component: 2900 - total flux cleaned = 7.66857e-05 Jy ! Component: 2950 - total flux cleaned = 7.67835e-05 Jy ! Component: 3000 - total flux cleaned = 9.99134e-05 Jy ! Component: 3050 - total flux cleaned = 0.000122851 Jy ! Component: 3100 - total flux cleaned = 0.000134212 Jy ! Component: 3150 - total flux cleaned = 0.000111564 Jy ! Component: 3200 - total flux cleaned = 0.00015667 Jy ! Component: 3250 - total flux cleaned = 0.0001792 Jy ! Component: 3300 - total flux cleaned = 0.000190304 Jy ! Component: 3350 - total flux cleaned = 0.000190301 Jy ! Component: 3400 - total flux cleaned = 0.000223408 Jy ! Component: 3450 - total flux cleaned = 0.000245294 Jy ! Component: 3500 - total flux cleaned = 0.000267071 Jy ! Component: 3550 - total flux cleaned = 0.000267061 Jy ! Component: 3600 - total flux cleaned = 0.000277817 Jy ! Component: 3650 - total flux cleaned = 0.000342163 Jy ! Component: 3700 - total flux cleaned = 0.000363444 Jy ! Component: 3750 - total flux cleaned = 0.000384648 Jy ! Component: 3800 - total flux cleaned = 0.000416418 Jy ! Component: 3850 - total flux cleaned = 0.000490129 Jy ! Component: 3900 - total flux cleaned = 0.000500591 Jy ! Component: 3950 - total flux cleaned = 0.000531847 Jy ! Component: 4000 - total flux cleaned = 0.000573477 Jy ! Component: 4050 - total flux cleaned = 0.000625235 Jy ! Total flux subtracted in 4096 components = 0.000645781 Jy ! Clean residual min=-0.000620 max=0.000659 Jy/beam ! Clean residual mean=-0.000000 rms=0.000178 Jy/beam ! Combined flux in latest and established models = 0.0641944 Jy keep ! Adding 259 model components to the UV plane model. ! The established model now contains 364 components and 0.0641945 Jy ![Exited script file: muppet] wmap "J1231+6414_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.642 x 7.127 at -64.79 degrees (North through East) ! Clean map min=-0.0021845 max=0.050932 Jy/beam ! Writing clean map to FITS file: J1231+6414_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0509317 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00017187 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.01236 1.01236 2.02472 4.04943 8.09887 16.1977 32.3955 64.7909 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.05 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.642 x 7.127 at -64.79 degrees (North through East) ! Clean map min=-0.0021845 max=0.050932 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1231+6414_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:12:43 2019