! Started logfile: J1231+0418_S_2017_04_28_pus_uvs.log on Thu May 2 16:26:03 2019 obs J1231+0418_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J1231+0418_S_2017_04_28_pus_uva.fits ! AN table 1: 83 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.839357 visibilities/baseline/integration-bin. ! Found source: J1231+0418 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 12540 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1231+0418_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 419 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.594606Jy sigma=0.055507 ! Fit after self-cal, rms=0.583333Jy sigma=0.055481 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.603 mas, bmaj=7.814 mas, bpa=-10.17 degrees ! Estimated noise=384.039 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.126031 Jy ! Component: 100 - total flux cleaned = 0.183516 Jy ! Total flux subtracted in 100 components = 0.183516 Jy ! Clean residual min=-0.042746 max=0.057367 Jy/beam ! Clean residual mean=0.000013 rms=0.014007 Jy/beam ! Combined flux in latest and established models = 0.183516 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.183516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.321798Jy sigma=0.006783 ! Fit after self-cal, rms=0.321447Jy sigma=0.006782 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.916 mas, bmaj=8.332 mas, bpa=-10.28 degrees ! Estimated noise=362.079 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0582678 Jy ! Component: 100 - total flux cleaned = 0.0907366 Jy ! Component: 150 - total flux cleaned = 0.109644 Jy ! Component: 200 - total flux cleaned = 0.115716 Jy ! Total flux subtracted in 200 components = 0.115716 Jy ! Clean residual min=-0.049920 max=0.063200 Jy/beam ! Clean residual mean=-0.000054 rms=0.016373 Jy/beam ! Combined flux in latest and established models = 0.299232 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 25 components and 0.299232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.264814Jy sigma=0.008967 ! Fit after self-cal, rms=0.264469Jy sigma=0.008967 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.74 FD 0.76 HN 0.57 KP 0.75 ! LA 0.78 MK 18.49 NL 0.69 OV 0.79 ! PT 0.83 SC 0.82 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.78 FD 0.67 HN 0.66 KP 0.73 ! LA 0.74 MK 0.30 NL 0.78 OV 0.80 ! PT 0.82 SC 0.88 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.78 FD 0.71 HN 0.66 KP 0.76 ! LA 0.78 MK 0.29 NL 0.72 OV 0.73 ! PT 0.81 SC 0.86 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 19.34 HN 0.65 KP 1.00* ! LA 36.19 MK 0.43 NL 1.00* OV 1.00* ! PT 0.57 SC 1.00* ! ! ! Fit before self-cal, rms=0.264469Jy sigma=0.008967 ! Fit after self-cal, rms=14.462519Jy sigma=0.001283 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.11 mas, bmaj=7.879 mas, bpa=-6.28 degrees ! Estimated noise=442.347 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00745631 Jy ! Component: 100 - total flux cleaned = -0.0116731 Jy ! Component: 150 - total flux cleaned = -0.0141177 Jy ! Component: 200 - total flux cleaned = -0.0154873 Jy ! Total flux subtracted in 200 components = -0.0154873 Jy ! Clean residual min=-0.009740 max=0.008731 Jy/beam ! Clean residual mean=-0.000000 rms=0.002289 Jy/beam ! Combined flux in latest and established models = 0.283744 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 38 components and 0.283744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=14.462191Jy sigma=0.001171 ! Fit after self-cal, rms=14.462205Jy sigma=0.001152 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=14.462205Jy sigma=0.001152 ! Fit after self-cal, rms=19.036549Jy sigma=0.001002 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.266 mas, bmaj=7.899 mas, bpa=-4.537 degrees ! Estimated noise=464.627 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0020003 Jy ! Component: 100 - total flux cleaned = -0.00434917 Jy ! Component: 150 - total flux cleaned = -0.0057635 Jy ! Component: 200 - total flux cleaned = -0.00660736 Jy ! Total flux subtracted in 200 components = -0.00660736 Jy ! Clean residual min=-0.006541 max=0.008274 Jy/beam ! Clean residual mean=0.000007 rms=0.001829 Jy/beam ! Combined flux in latest and established models = 0.277137 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 42 components and 0.277137 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=19.036371Jy sigma=0.000995 ! Fit after self-cal, rms=19.036390Jy sigma=0.000994 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-85.5, -97). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00508343 Jy ! Component: 100 - total flux cleaned = 0.00601785 Jy ! Component: 150 - total flux cleaned = 0.00621595 Jy ! Component: 200 - total flux cleaned = 0.00602373 Jy ! Total flux subtracted in 200 components = 0.00602373 Jy ! Clean residual min=-0.006272 max=0.007418 Jy/beam ! Clean residual mean=0.000006 rms=0.001781 Jy/beam ! Combined flux in latest and established models = 0.283161 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 61 components and 0.283161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=19.036064Jy sigma=0.000994 ! Fit after self-cal, rms=19.036051Jy sigma=0.000992 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=19.036051Jy sigma=0.000992 ! Fit after self-cal, rms=0.052857Jy sigma=0.000720 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.254 mas, bmaj=7.895 mas, bpa=-4.516 degrees ! Estimated noise=462.731 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00262293 Jy ! Component: 100 - total flux cleaned = -0.00326708 Jy ! Component: 150 - total flux cleaned = -0.00384757 Jy ! Component: 200 - total flux cleaned = -0.00437628 Jy ! Total flux subtracted in 200 components = -0.00437628 Jy ! Clean residual min=-0.004208 max=0.003420 Jy/beam ! Clean residual mean=0.000002 rms=0.000749 Jy/beam ! Combined flux in latest and established models = 0.278784 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 74 components and 0.278784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052241Jy sigma=0.000711 ! Fit after self-cal, rms=0.052171Jy sigma=0.000710 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000289776 Jy ! Component: 100 - total flux cleaned = -0.00074643 Jy ! Component: 150 - total flux cleaned = -0.00117156 Jy ! Component: 200 - total flux cleaned = -0.00148803 Jy ! Total flux subtracted in 200 components = -0.00148803 Jy ! Clean residual min=-0.003898 max=0.003115 Jy/beam ! Clean residual mean=0.000003 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.277296 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 81 components and 0.277296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051885Jy sigma=0.000706 ! Fit after self-cal, rms=0.051882Jy sigma=0.000706 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051882Jy sigma=0.000706 ! Fit after self-cal, rms=0.052111Jy sigma=0.000705 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.202 mas, bmaj=11.5 mas, bpa=-2.331 degrees ! Estimated noise=586.352 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00242744 Jy ! Component: 100 - total flux cleaned = -0.00303776 Jy ! Component: 150 - total flux cleaned = -0.00350336 Jy ! Component: 200 - total flux cleaned = -0.00387015 Jy ! Total flux subtracted in 200 components = -0.00387015 Jy ! Clean residual min=-0.002061 max=0.002619 Jy/beam ! Clean residual mean=0.000005 rms=0.000657 Jy/beam ! Combined flux in latest and established models = 0.273426 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 93 components and 0.273426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052083Jy sigma=0.000704 ! Fit after self-cal, rms=0.052076Jy sigma=0.000704 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000184746 Jy ! Component: 100 - total flux cleaned = -0.000490181 Jy ! Component: 150 - total flux cleaned = -0.000795036 Jy ! Component: 200 - total flux cleaned = -0.000948557 Jy ! Total flux subtracted in 200 components = -0.000948557 Jy ! Clean residual min=-0.002035 max=0.002616 Jy/beam ! Clean residual mean=0.000006 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 0.272478 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 107 components and 0.272478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052045Jy sigma=0.000704 ! Fit after self-cal, rms=0.052042Jy sigma=0.000703 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.274 mas, bmaj=7.895 mas, bpa=-4.187 degrees ! Estimated noise=463.608 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.274 x 7.895 at -4.187 degrees (North through East) ! Clean map min=-0.0035542 max=0.23464 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.779 mas, bmaj=7.15 mas, bpa=-5.478 degrees ! Estimated noise=577.289 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.182233 Jy ! Component: 100 - total flux cleaned = 0.235253 Jy ! Component: 150 - total flux cleaned = 0.256713 Jy ! Component: 200 - total flux cleaned = 0.266419 Jy ! Total flux subtracted in 200 components = 0.266419 Jy ! Clean residual min=-0.005866 max=0.004637 Jy/beam ! Clean residual mean=0.000005 rms=0.000940 Jy/beam ! Combined flux in latest and established models = 0.266419 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.266419 Jy ! Inverting map and beam ! Estimated beam: bmin=3.274 mas, bmaj=7.895 mas, bpa=-4.187 degrees ! Estimated noise=463.608 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00439267 Jy ! Component: 100 - total flux cleaned = 0.00492479 Jy ! Component: 150 - total flux cleaned = 0.00520518 Jy ! Component: 200 - total flux cleaned = 0.00542974 Jy ! Total flux subtracted in 200 components = 0.00542974 Jy ! Clean residual min=-0.004146 max=0.002915 Jy/beam ! Clean residual mean=0.000004 rms=0.000687 Jy/beam ! Combined flux in latest and established models = 0.271849 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 33 components and 0.271849 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.202 mas, bmaj=11.5 mas, bpa=-2.331 degrees ! Estimated noise=586.352 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112705 Jy ! Component: 100 - total flux cleaned = 0.000802085 Jy ! Component: 150 - total flux cleaned = 0.000673908 Jy ! Component: 200 - total flux cleaned = 0.000618928 Jy ! Total flux subtracted in 200 components = 0.000618928 Jy ! Clean residual min=-0.002564 max=0.002502 Jy/beam ! Clean residual mean=0.000007 rms=0.000712 Jy/beam ! Combined flux in latest and established models = 0.272468 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.16699e-06 Jy ! Component: 100 - total flux cleaned = 4.2338e-05 Jy ! Component: 150 - total flux cleaned = 4.94343e-06 Jy ! Component: 200 - total flux cleaned = 5.73465e-06 Jy ! Total flux subtracted in 200 components = 5.73465e-06 Jy ! Clean residual min=-0.002261 max=0.002523 Jy/beam ! Clean residual mean=0.000007 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.272474 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 57 components and 0.272474 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.274 mas, bmaj=7.895 mas, bpa=-4.187 degrees ! Estimated noise=463.608 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.06139e-05 Jy ! Component: 100 - total flux cleaned = 0.000110416 Jy ! Component: 150 - total flux cleaned = 0.000110184 Jy ! Component: 200 - total flux cleaned = 0.000156808 Jy ! Total flux subtracted in 200 components = 0.000156808 Jy ! Clean residual min=-0.003476 max=0.002592 Jy/beam ! Clean residual mean=0.000003 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 0.272631 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 69 components and 0.272631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051339Jy sigma=0.000698 ! Fit after self-cal, rms=0.051310Jy sigma=0.000697 wmodel J1231+0418_S_2017_04_28_pus_map.mod ! Writing 69 model components to file: J1231+0418_S_2017_04_28_pus_map.mod wobs J1231+0418_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J1231+0418_S_2017_04_28_pus_uvs.fits wwins J1231+0418_S_2017_04_28_pus_map.win ! wwins: Wrote 2 windows to J1231+0418_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00150732 Jy ! Component: 100 - total flux cleaned = -0.00260964 Jy ! Component: 150 - total flux cleaned = -0.00323441 Jy ! Component: 200 - total flux cleaned = -0.00348243 Jy ! Component: 250 - total flux cleaned = -0.00360137 Jy ! Component: 300 - total flux cleaned = -0.00382757 Jy ! Component: 350 - total flux cleaned = -0.00393468 Jy ! Component: 400 - total flux cleaned = -0.00403926 Jy ! Component: 450 - total flux cleaned = -0.00414156 Jy ! Component: 500 - total flux cleaned = -0.0042414 Jy ! Component: 550 - total flux cleaned = -0.00436943 Jy ! Component: 600 - total flux cleaned = -0.00436984 Jy ! Component: 650 - total flux cleaned = -0.00449154 Jy ! Component: 700 - total flux cleaned = -0.00449172 Jy ! Component: 750 - total flux cleaned = -0.00452103 Jy ! Component: 800 - total flux cleaned = -0.0046058 Jy ! Component: 850 - total flux cleaned = -0.00463344 Jy ! Component: 900 - total flux cleaned = -0.00471533 Jy ! Component: 950 - total flux cleaned = -0.00479545 Jy ! Component: 1000 - total flux cleaned = -0.00484711 Jy ! Component: 1050 - total flux cleaned = -0.00479587 Jy ! Component: 1100 - total flux cleaned = -0.00482116 Jy ! Component: 1150 - total flux cleaned = -0.00482141 Jy ! Component: 1200 - total flux cleaned = -0.00482113 Jy ! Component: 1250 - total flux cleaned = -0.00484497 Jy ! Component: 1300 - total flux cleaned = -0.00479799 Jy ! Component: 1350 - total flux cleaned = -0.0047751 Jy ! Component: 1400 - total flux cleaned = -0.00486559 Jy ! Component: 1450 - total flux cleaned = -0.00484335 Jy ! Component: 1500 - total flux cleaned = -0.00482142 Jy ! Component: 1550 - total flux cleaned = -0.00488627 Jy ! Component: 1600 - total flux cleaned = -0.0048438 Jy ! Component: 1650 - total flux cleaned = -0.00480231 Jy ! Component: 1700 - total flux cleaned = -0.00478166 Jy ! Component: 1750 - total flux cleaned = -0.00476118 Jy ! Component: 1800 - total flux cleaned = -0.00474141 Jy ! Component: 1850 - total flux cleaned = -0.00468217 Jy ! Component: 1900 - total flux cleaned = -0.0047015 Jy ! Component: 1950 - total flux cleaned = -0.00468243 Jy ! Component: 2000 - total flux cleaned = -0.00468207 Jy ! Component: 2050 - total flux cleaned = -0.00462654 Jy ! Component: 2100 - total flux cleaned = -0.0046453 Jy ! Component: 2150 - total flux cleaned = -0.00460901 Jy ! Component: 2200 - total flux cleaned = -0.00453786 Jy ! Component: 2250 - total flux cleaned = -0.00455594 Jy ! Component: 2300 - total flux cleaned = -0.00453888 Jy ! Component: 2350 - total flux cleaned = -0.00452173 Jy ! Component: 2400 - total flux cleaned = -0.00448791 Jy ! Component: 2450 - total flux cleaned = -0.00448789 Jy ! Component: 2500 - total flux cleaned = -0.00452057 Jy ! Component: 2550 - total flux cleaned = -0.00445521 Jy ! Component: 2600 - total flux cleaned = -0.00445513 Jy ! Component: 2650 - total flux cleaned = -0.00440723 Jy ! Component: 2700 - total flux cleaned = -0.00434486 Jy ! Component: 2750 - total flux cleaned = -0.00439173 Jy ! Component: 2800 - total flux cleaned = -0.0043147 Jy ! Component: 2850 - total flux cleaned = -0.0042846 Jy ! Component: 2900 - total flux cleaned = -0.0042697 Jy ! Component: 2950 - total flux cleaned = -0.00426947 Jy ! Component: 3000 - total flux cleaned = -0.00424026 Jy ! Component: 3050 - total flux cleaned = -0.00422607 Jy ! Component: 3100 - total flux cleaned = -0.00424057 Jy ! Component: 3150 - total flux cleaned = -0.00425464 Jy ! Component: 3200 - total flux cleaned = -0.00424079 Jy ! Component: 3250 - total flux cleaned = -0.0042409 Jy ! Component: 3300 - total flux cleaned = -0.00429589 Jy ! Component: 3350 - total flux cleaned = -0.00428231 Jy ! Component: 3400 - total flux cleaned = -0.00430924 Jy ! Component: 3450 - total flux cleaned = -0.00434904 Jy ! Component: 3500 - total flux cleaned = -0.00428277 Jy ! Component: 3550 - total flux cleaned = -0.0043224 Jy ! Component: 3600 - total flux cleaned = -0.00433532 Jy ! Component: 3650 - total flux cleaned = -0.00434843 Jy ! Component: 3700 - total flux cleaned = -0.00438666 Jy ! Component: 3750 - total flux cleaned = -0.00441176 Jy ! Component: 3800 - total flux cleaned = -0.00438666 Jy ! Component: 3850 - total flux cleaned = -0.00442377 Jy ! Component: 3900 - total flux cleaned = -0.00441137 Jy ! Component: 3950 - total flux cleaned = -0.00442357 Jy ! Component: 4000 - total flux cleaned = -0.00438746 Jy ! Component: 4050 - total flux cleaned = -0.00439934 Jy ! Total flux subtracted in 4096 components = -0.00441109 Jy ! Clean residual min=-0.000614 max=0.000606 Jy/beam ! Clean residual mean=0.000001 rms=0.000225 Jy/beam ! Combined flux in latest and established models = 0.268219 Jy keep ! Adding 297 model components to the UV plane model. ! The established model now contains 366 components and 0.26822 Jy ![Exited script file: muppet] wmap "J1231+0418_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.274 x 7.895 at -4.187 degrees (North through East) ! Clean map min=-0.0023319 max=0.23656 Jy/beam ! Writing clean map to FITS file: J1231+0418_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.236562 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000224229 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.284359 0.284359 0.568718 1.13744 2.27487 4.54974 9.09949 18.199 36.3979 72.7959 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.236 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.274 x 7.895 at -4.187 degrees (North through East) ! Clean map min=-0.0023319 max=0.23656 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1231+0418_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:26:08 2019