! Started logfile: J1230-0108_S_2017_08_12_pus_uvs.log on Fri May 10 14:59:37 2019 obs J1230-0108_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J1230-0108_S_2017_08_12_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.774041 visibilities/baseline/integration-bin. ! Found source: J1230-0108 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 15744 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1230-0108_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 156 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 712 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.932469Jy sigma=0.007853 ! Fit after self-cal, rms=0.921578Jy sigma=0.007769 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.583 mas, bmaj=7.312 mas, bpa=-5.959 degrees ! Estimated noise=1023.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.062769 Jy ! Component: 100 - total flux cleaned = 0.0764643 Jy ! Total flux subtracted in 100 components = 0.0764643 Jy ! Clean residual min=-0.003452 max=0.003836 Jy/beam ! Clean residual mean=0.000001 rms=0.000862 Jy/beam ! Combined flux in latest and established models = 0.0764643 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.0764643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083221Jy sigma=0.000670 ! Fit after self-cal, rms=0.083209Jy sigma=0.000670 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.112 mas, bmaj=8.339 mas, bpa=-5.069 degrees ! Estimated noise=766.915 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00495162 Jy ! Component: 100 - total flux cleaned = 0.00716695 Jy ! Component: 150 - total flux cleaned = 0.00814077 Jy ! Component: 200 - total flux cleaned = 0.00833151 Jy ! Total flux subtracted in 200 components = 0.00833151 Jy ! Clean residual min=-0.002534 max=0.002353 Jy/beam ! Clean residual mean=-0.000003 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.0847959 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 30 components and 0.0847959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082937Jy sigma=0.000668 ! Fit after self-cal, rms=0.082955Jy sigma=0.000668 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.90 KP 1.03 ! LA 1.03 MK 1.03 NL 0.91 OV 0.99 ! PT 1.05 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 0.98 KP 0.99 ! LA 1.01 MK 1.08 NL 0.99 OV 1.04 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 0.98 KP 0.95 ! LA 1.00 MK 1.08 NL 0.95 OV 0.95 ! PT 1.02 SC 1.05 ! ! ! Correcting IF 4. ! A total of 42 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 0.82 KP 1.00* ! LA 1.00* MK 1.00 NL 1.00* OV 1.00* ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.082955Jy sigma=0.000668 ! Fit after self-cal, rms=0.082715Jy sigma=0.000667 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.132 mas, bmaj=8.323 mas, bpa=-4.996 degrees ! Estimated noise=767.311 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.40898e-05 Jy ! Component: 100 - total flux cleaned = 9.97306e-05 Jy ! Component: 150 - total flux cleaned = 0.000114023 Jy ! Component: 200 - total flux cleaned = 0.00011367 Jy ! Total flux subtracted in 200 components = 0.00011367 Jy ! Clean residual min=-0.002464 max=0.002241 Jy/beam ! Clean residual mean=-0.000001 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.0849095 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 40 components and 0.0849095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082709Jy sigma=0.000667 ! Fit after self-cal, rms=0.082719Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082719Jy sigma=0.000666 ! Fit after self-cal, rms=0.082594Jy sigma=0.000665 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.132 mas, bmaj=8.316 mas, bpa=-4.99 degrees ! Estimated noise=766.993 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00012921 Jy ! Component: 100 - total flux cleaned = 0.00016443 Jy ! Component: 150 - total flux cleaned = 0.000154195 Jy ! Component: 200 - total flux cleaned = 0.000144323 Jy ! Total flux subtracted in 200 components = 0.000144323 Jy ! Clean residual min=-0.002391 max=0.001871 Jy/beam ! Clean residual mean=-0.000004 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 0.0850538 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 47 components and 0.0850538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082591Jy sigma=0.000665 ! Fit after self-cal, rms=0.082611Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.67863e-05 Jy ! Component: 100 - total flux cleaned = -3.72044e-05 Jy ! Component: 150 - total flux cleaned = -4.54911e-05 Jy ! Component: 200 - total flux cleaned = -6.04861e-05 Jy ! Total flux subtracted in 200 components = -6.04861e-05 Jy ! Clean residual min=-0.002395 max=0.001883 Jy/beam ! Clean residual mean=-0.000004 rms=0.000500 Jy/beam ! Combined flux in latest and established models = 0.0849934 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 47 components and 0.0849933 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082609Jy sigma=0.000665 ! Fit after self-cal, rms=0.082609Jy sigma=0.000665 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082609Jy sigma=0.000665 ! Fit after self-cal, rms=0.082846Jy sigma=0.000665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.131 mas, bmaj=8.314 mas, bpa=-5.011 degrees ! Estimated noise=767.109 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.90031e-05 Jy ! Component: 100 - total flux cleaned = 6.67309e-05 Jy ! Component: 150 - total flux cleaned = 5.94439e-05 Jy ! Component: 200 - total flux cleaned = 4.63404e-05 Jy ! Total flux subtracted in 200 components = 4.63404e-05 Jy ! Clean residual min=-0.002343 max=0.001859 Jy/beam ! Clean residual mean=-0.000004 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.0850397 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 54 components and 0.0850397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082844Jy sigma=0.000665 ! Fit after self-cal, rms=0.082869Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.38124e-05 Jy ! Component: 100 - total flux cleaned = -2.39043e-05 Jy ! Component: 150 - total flux cleaned = -3.00008e-05 Jy ! Component: 200 - total flux cleaned = -3.54719e-05 Jy ! Total flux subtracted in 200 components = -3.54719e-05 Jy ! Clean residual min=-0.002348 max=0.001874 Jy/beam ! Clean residual mean=-0.000004 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.0850042 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 55 components and 0.0850042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082868Jy sigma=0.000665 ! Fit after self-cal, rms=0.082868Jy sigma=0.000665 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082868Jy sigma=0.000665 ! Fit after self-cal, rms=0.082903Jy sigma=0.000665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.072 mas, bmaj=14.44 mas, bpa=-8.927 degrees ! Estimated noise=997.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000201855 Jy ! Component: 100 - total flux cleaned = -0.000212022 Jy ! Component: 150 - total flux cleaned = -0.00022088 Jy ! Component: 200 - total flux cleaned = -0.000213992 Jy ! Total flux subtracted in 200 components = -0.000213992 Jy ! Clean residual min=-0.002845 max=0.001957 Jy/beam ! Clean residual mean=-0.000009 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 0.0847902 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 62 components and 0.0847902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082904Jy sigma=0.000665 ! Fit after self-cal, rms=0.082904Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.48967e-05 Jy ! Component: 100 - total flux cleaned = 2.69525e-05 Jy ! Component: 150 - total flux cleaned = 3.29043e-05 Jy ! Component: 200 - total flux cleaned = 3.31341e-05 Jy ! Total flux subtracted in 200 components = 3.31341e-05 Jy ! Clean residual min=-0.002842 max=0.001956 Jy/beam ! Clean residual mean=-0.000009 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 0.0848234 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 67 components and 0.0848234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082905Jy sigma=0.000665 ! Fit after self-cal, rms=0.082905Jy sigma=0.000665 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.13 mas, bmaj=8.316 mas, bpa=-5.05 degrees ! Estimated noise=767.171 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.13 x 8.316 at -5.05 degrees (North through East) ! Clean map min=-0.0022967 max=0.081591 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.59 mas, bmaj=7.303 mas, bpa=-6.138 degrees ! Estimated noise=1028.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0627857 Jy ! Component: 100 - total flux cleaned = 0.0765658 Jy ! Component: 150 - total flux cleaned = 0.0806355 Jy ! Component: 200 - total flux cleaned = 0.082763 Jy ! Total flux subtracted in 200 components = 0.082763 Jy ! Clean residual min=-0.002672 max=0.002846 Jy/beam ! Clean residual mean=-0.000001 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.082763 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.082763 Jy ! Inverting map and beam ! Estimated beam: bmin=3.13 mas, bmaj=8.316 mas, bpa=-5.05 degrees ! Estimated noise=767.171 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015935 Jy ! Component: 100 - total flux cleaned = 0.00184094 Jy ! Component: 150 - total flux cleaned = 0.00204385 Jy ! Component: 200 - total flux cleaned = 0.00215667 Jy ! Total flux subtracted in 200 components = 0.00215667 Jy ! Clean residual min=-0.002319 max=0.001868 Jy/beam ! Clean residual mean=-0.000004 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.0849197 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 29 components and 0.0849197 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.072 mas, bmaj=14.44 mas, bpa=-8.927 degrees ! Estimated noise=997.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00013987 Jy ! Component: 100 - total flux cleaned = -0.000153881 Jy ! Component: 150 - total flux cleaned = -0.000167412 Jy ! Component: 200 - total flux cleaned = -0.000178997 Jy ! Total flux subtracted in 200 components = -0.000178997 Jy ! Clean residual min=-0.002852 max=0.001956 Jy/beam ! Clean residual mean=-0.000009 rms=0.000638 Jy/beam ! Combined flux in latest and established models = 0.0847407 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.78539e-08 Jy ! Component: 100 - total flux cleaned = 9.13109e-06 Jy ! Component: 150 - total flux cleaned = 1.82981e-05 Jy ! Component: 200 - total flux cleaned = 2.66512e-05 Jy ! Total flux subtracted in 200 components = 2.66512e-05 Jy ! Clean residual min=-0.002852 max=0.001954 Jy/beam ! Clean residual mean=-0.000009 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.0847674 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 41 components and 0.0847674 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.13 mas, bmaj=8.316 mas, bpa=-5.05 degrees ! Estimated noise=767.171 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00036477 Jy ! Component: 100 - total flux cleaned = 0.000352159 Jy ! Component: 150 - total flux cleaned = 0.0003322 Jy ! Component: 200 - total flux cleaned = 0.000296833 Jy ! Total flux subtracted in 200 components = 0.000296833 Jy ! Clean residual min=-0.002325 max=0.001877 Jy/beam ! Clean residual mean=-0.000004 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.0850642 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 52 components and 0.0850642 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082905Jy sigma=0.000665 ! Fit after self-cal, rms=0.082905Jy sigma=0.000665 wmodel J1230-0108_S_2017_08_12_pus_map.mod ! Writing 52 model components to file: J1230-0108_S_2017_08_12_pus_map.mod wobs J1230-0108_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J1230-0108_S_2017_08_12_pus_uvs.fits wwins J1230-0108_S_2017_08_12_pus_map.win ! wwins: Wrote 1 windows to J1230-0108_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000676865 Jy ! Component: 100 - total flux cleaned = -0.000873103 Jy ! Component: 150 - total flux cleaned = -0.00105166 Jy ! Component: 200 - total flux cleaned = -0.00102379 Jy ! Component: 250 - total flux cleaned = -0.0010514 Jy ! Component: 300 - total flux cleaned = -0.00102513 Jy ! Component: 350 - total flux cleaned = -0.00102605 Jy ! Component: 400 - total flux cleaned = -0.00110054 Jy ! Component: 450 - total flux cleaned = -0.00107555 Jy ! Component: 500 - total flux cleaned = -0.00105166 Jy ! Component: 550 - total flux cleaned = -0.00109834 Jy ! Component: 600 - total flux cleaned = -0.00105234 Jy ! Component: 650 - total flux cleaned = -0.00100737 Jy ! Component: 700 - total flux cleaned = -0.00102963 Jy ! Component: 750 - total flux cleaned = -0.00105098 Jy ! Component: 800 - total flux cleaned = -0.00105097 Jy ! Component: 850 - total flux cleaned = -0.00109341 Jy ! Component: 900 - total flux cleaned = -0.00109346 Jy ! Component: 950 - total flux cleaned = -0.00113468 Jy ! Component: 1000 - total flux cleaned = -0.00113452 Jy ! Component: 1050 - total flux cleaned = -0.00113439 Jy ! Component: 1100 - total flux cleaned = -0.0011541 Jy ! Component: 1150 - total flux cleaned = -0.00111533 Jy ! Component: 1200 - total flux cleaned = -0.00105786 Jy ! Component: 1250 - total flux cleaned = -0.000982281 Jy ! Component: 1300 - total flux cleaned = -0.000963641 Jy ! Component: 1350 - total flux cleaned = -0.000926474 Jy ! Component: 1400 - total flux cleaned = -0.000816475 Jy ! Component: 1450 - total flux cleaned = -0.000798242 Jy ! Component: 1500 - total flux cleaned = -0.000726626 Jy ! Component: 1550 - total flux cleaned = -0.000761852 Jy ! Component: 1600 - total flux cleaned = -0.000674333 Jy ! Component: 1650 - total flux cleaned = -0.000709127 Jy ! Component: 1700 - total flux cleaned = -0.000657875 Jy ! Component: 1750 - total flux cleaned = -0.000658068 Jy ! Component: 1800 - total flux cleaned = -0.000607604 Jy ! Component: 1850 - total flux cleaned = -0.000591069 Jy ! Component: 1900 - total flux cleaned = -0.000525367 Jy ! Component: 1950 - total flux cleaned = -0.000558052 Jy ! Component: 2000 - total flux cleaned = -0.00057395 Jy ! Component: 2050 - total flux cleaned = -0.000477967 Jy ! Component: 2100 - total flux cleaned = -0.000462325 Jy ! Component: 2150 - total flux cleaned = -0.00044639 Jy ! Component: 2200 - total flux cleaned = -0.000384038 Jy ! Component: 2250 - total flux cleaned = -0.0003686 Jy ! Component: 2300 - total flux cleaned = -0.000368423 Jy ! Component: 2350 - total flux cleaned = -0.000337987 Jy ! Component: 2400 - total flux cleaned = -0.000308133 Jy ! Component: 2450 - total flux cleaned = -0.000263441 Jy ! Component: 2500 - total flux cleaned = -0.000219223 Jy ! Component: 2550 - total flux cleaned = -0.000175452 Jy ! Component: 2600 - total flux cleaned = -0.000117756 Jy ! Component: 2650 - total flux cleaned = -0.000103337 Jy ! Component: 2700 - total flux cleaned = -7.48105e-05 Jy ! Component: 2750 - total flux cleaned = -4.40283e-06 Jy ! Component: 2800 - total flux cleaned = -6.04173e-05 Jy ! Component: 2850 - total flux cleaned = 3.69644e-05 Jy ! Component: 2900 - total flux cleaned = 0.000105979 Jy ! Component: 2950 - total flux cleaned = 0.000105996 Jy ! Component: 3000 - total flux cleaned = 0.000160401 Jy ! Component: 3050 - total flux cleaned = 0.000227607 Jy ! Component: 3100 - total flux cleaned = 0.000227565 Jy ! Component: 3150 - total flux cleaned = 0.000240957 Jy ! Component: 3200 - total flux cleaned = 0.00026708 Jy ! Component: 3250 - total flux cleaned = 0.000280215 Jy ! Component: 3300 - total flux cleaned = 0.000254294 Jy ! Component: 3350 - total flux cleaned = 0.000280029 Jy ! Component: 3400 - total flux cleaned = 0.000254583 Jy ! Component: 3450 - total flux cleaned = 0.000280067 Jy ! Component: 3500 - total flux cleaned = 0.000267633 Jy ! Component: 3550 - total flux cleaned = 0.000342678 Jy ! Component: 3600 - total flux cleaned = 0.000355206 Jy ! Component: 3650 - total flux cleaned = 0.000355081 Jy ! Component: 3700 - total flux cleaned = 0.000342992 Jy ! Component: 3750 - total flux cleaned = 0.000343152 Jy ! Component: 3800 - total flux cleaned = 0.000403368 Jy ! Component: 3850 - total flux cleaned = 0.000415382 Jy ! Component: 3900 - total flux cleaned = 0.000439037 Jy ! Component: 3950 - total flux cleaned = 0.000462574 Jy ! Component: 4000 - total flux cleaned = 0.000474221 Jy ! Component: 4050 - total flux cleaned = 0.000485763 Jy ! Total flux subtracted in 4096 components = 0.000497302 Jy ! Clean residual min=-0.000685 max=0.000817 Jy/beam ! Clean residual mean=-0.000003 rms=0.000215 Jy/beam ! Combined flux in latest and established models = 0.0855615 Jy keep ! Adding 290 model components to the UV plane model. ! The established model now contains 342 components and 0.0855615 Jy ![Exited script file: muppet] wmap "J1230-0108_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.13 x 8.316 at -5.05 degrees (North through East) ! Clean map min=-0.0014991 max=0.08158 Jy/beam ! Writing clean map to FITS file: J1230-0108_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0815799 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000213576 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.785398 0.785398 1.5708 3.14159 6.28318 12.5664 25.1327 50.2655 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.081 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.13 x 8.316 at -5.05 degrees (North through East) ! Clean map min=-0.0014991 max=0.08158 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1230-0108_S_2017_08_12_pus_uvs.log closed on Fri May 10 14:59:41 2019