! Started logfile: J1229+6335_S_2017_05_01_pus_uvs.log on Wed May 1 18:35:54 2019 obs J1229+6335_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J1229+6335_S_2017_05_01_pus_uva.fits ! AN table 1: 151 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.969095 visibilities/baseline/integration-bin. ! Found source: J1229+6335 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 26340 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1229+6335_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 626 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.673401Jy sigma=0.026632 ! Fit after self-cal, rms=0.664792Jy sigma=0.026611 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.385 mas, bmaj=3.927 mas, bpa=-15.33 degrees ! Estimated noise=809.392 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.223713 Jy ! Component: 100 - total flux cleaned = 0.278412 Jy ! Total flux subtracted in 100 components = 0.278412 Jy ! Clean residual min=-0.041689 max=0.042298 Jy/beam ! Clean residual mean=-0.000193 rms=0.013229 Jy/beam ! Combined flux in latest and established models = 0.278411 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.278411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155517Jy sigma=0.007040 ! Fit after self-cal, rms=0.155447Jy sigma=0.007040 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.259 mas, bmaj=4.89 mas, bpa=-12.76 degrees ! Estimated noise=455.825 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0167334 Jy ! Component: 100 - total flux cleaned = 0.0183326 Jy ! Component: 150 - total flux cleaned = 0.0186624 Jy ! Component: 200 - total flux cleaned = 0.0186599 Jy ! Total flux subtracted in 200 components = 0.0186599 Jy ! Clean residual min=-0.057889 max=0.064016 Jy/beam ! Clean residual mean=-0.000291 rms=0.019494 Jy/beam ! Combined flux in latest and established models = 0.297071 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 14 components and 0.297071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147336Jy sigma=0.007359 ! Fit after self-cal, rms=0.147141Jy sigma=0.007358 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 0.77 HN 1.03 KP 0.84 ! LA 0.81 MK 0.94 NL 0.81 OV 0.86 ! PT 0.83 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.81 HN 1.05 KP 0.80 ! LA 0.78 MK 0.99 NL 0.86 OV 0.90 ! PT 0.81 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.84 HN 1.02 KP 0.82 ! LA 0.82 MK 0.98 NL 0.86 OV 0.81 ! PT 0.81 SC 0.98 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.86 HN 1.08 KP 1.00* ! LA 35.11 MK 1.03 NL 1.00* OV 1.00* ! PT 0.86 SC 1.00* ! ! ! Fit before self-cal, rms=0.147141Jy sigma=0.007358 ! Fit after self-cal, rms=2.196561Jy sigma=0.000895 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.364 mas, bmaj=4.709 mas, bpa=2.32 degrees ! Estimated noise=457.482 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2, 4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0194455 Jy ! Component: 100 - total flux cleaned = 0.0248664 Jy ! Component: 150 - total flux cleaned = 0.0253572 Jy ! Component: 200 - total flux cleaned = 0.0257478 Jy ! Total flux subtracted in 200 components = 0.0257478 Jy ! Clean residual min=-0.006368 max=0.006510 Jy/beam ! Clean residual mean=-0.000054 rms=0.001572 Jy/beam ! Combined flux in latest and established models = 0.322819 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 29 components and 0.322819 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.195400Jy sigma=0.000860 ! Fit after self-cal, rms=2.195602Jy sigma=0.000848 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.195602Jy sigma=0.000848 ! Fit after self-cal, rms=1.204895Jy sigma=0.000752 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.262 mas, bmaj=4.695 mas, bpa=-2.508 degrees ! Estimated noise=460.879 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00556244 Jy ! Component: 100 - total flux cleaned = 0.00830837 Jy ! Component: 150 - total flux cleaned = 0.0102411 Jy ! Component: 200 - total flux cleaned = 0.011079 Jy ! Total flux subtracted in 200 components = 0.011079 Jy ! Clean residual min=-0.003293 max=0.003711 Jy/beam ! Clean residual mean=0.000018 rms=0.000928 Jy/beam ! Combined flux in latest and established models = 0.333898 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 48 components and 0.333898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.204456Jy sigma=0.000750 ! Fit after self-cal, rms=1.204471Jy sigma=0.000749 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00023507 Jy ! Component: 100 - total flux cleaned = 0.000872732 Jy ! Component: 150 - total flux cleaned = 0.00128646 Jy ! Component: 200 - total flux cleaned = 0.00144762 Jy ! Total flux subtracted in 200 components = 0.00144762 Jy ! Clean residual min=-0.003295 max=0.003618 Jy/beam ! Clean residual mean=0.000020 rms=0.000913 Jy/beam ! Combined flux in latest and established models = 0.335346 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 56 components and 0.335346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.204387Jy sigma=0.000749 ! Fit after self-cal, rms=1.204386Jy sigma=0.000749 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.204386Jy sigma=0.000749 ! Fit after self-cal, rms=0.146180Jy sigma=0.000693 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.248 mas, bmaj=4.682 mas, bpa=-1.557 degrees ! Estimated noise=461.873 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00244105 Jy ! Component: 100 - total flux cleaned = 0.00377103 Jy ! Component: 150 - total flux cleaned = 0.00423562 Jy ! Component: 200 - total flux cleaned = 0.00446232 Jy ! Total flux subtracted in 200 components = 0.00446232 Jy ! Clean residual min=-0.001911 max=0.002251 Jy/beam ! Clean residual mean=0.000008 rms=0.000484 Jy/beam ! Combined flux in latest and established models = 0.339808 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 66 components and 0.339808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146014Jy sigma=0.000692 ! Fit after self-cal, rms=0.145979Jy sigma=0.000692 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (24, 99). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155157 Jy ! Component: 100 - total flux cleaned = 0.00167857 Jy ! Component: 150 - total flux cleaned = 0.00174828 Jy ! Component: 200 - total flux cleaned = 0.0017809 Jy ! Total flux subtracted in 200 components = 0.0017809 Jy ! Clean residual min=-0.001734 max=0.001935 Jy/beam ! Clean residual mean=0.000011 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.341589 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 79 components and 0.341589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145881Jy sigma=0.000691 ! Fit after self-cal, rms=0.145878Jy sigma=0.000691 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145878Jy sigma=0.000691 ! Fit after self-cal, rms=0.147175Jy sigma=0.000691 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.477 mas, bmaj=9.175 mas, bpa=53.73 degrees ! Estimated noise=545.977 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00193984 Jy ! Component: 100 - total flux cleaned = 0.00274022 Jy ! Component: 150 - total flux cleaned = 0.00303936 Jy ! Component: 200 - total flux cleaned = 0.00327881 Jy ! Total flux subtracted in 200 components = 0.00327881 Jy ! Clean residual min=-0.001886 max=0.002285 Jy/beam ! Clean residual mean=0.000018 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.344868 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 106 components and 0.344868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147083Jy sigma=0.000691 ! Fit after self-cal, rms=0.147079Jy sigma=0.000691 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000305291 Jy ! Component: 100 - total flux cleaned = 0.000384111 Jy ! Component: 150 - total flux cleaned = 0.000423969 Jy ! Component: 200 - total flux cleaned = 0.000436096 Jy ! Total flux subtracted in 200 components = 0.000436096 Jy ! Clean residual min=-0.001918 max=0.002315 Jy/beam ! Clean residual mean=0.000019 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.345304 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 121 components and 0.345304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147060Jy sigma=0.000691 ! Fit after self-cal, rms=0.147060Jy sigma=0.000691 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.235 mas, bmaj=4.676 mas, bpa=-1.175 degrees ! Estimated noise=463.334 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.235 x 4.676 at -1.175 degrees (North through East) ! Clean map min=-0.001652 max=0.27598 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.472 mas, bmaj=3.831 mas, bpa=-6.409 degrees ! Estimated noise=771.203 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.213212 Jy ! Component: 100 - total flux cleaned = 0.268814 Jy ! Component: 150 - total flux cleaned = 0.295659 Jy ! Component: 200 - total flux cleaned = 0.310833 Jy ! Total flux subtracted in 200 components = 0.310833 Jy ! Clean residual min=-0.004057 max=0.007954 Jy/beam ! Clean residual mean=-0.000029 rms=0.000919 Jy/beam ! Combined flux in latest and established models = 0.310833 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.310833 Jy ! Inverting map and beam ! Estimated beam: bmin=4.235 mas, bmaj=4.676 mas, bpa=-1.175 degrees ! Estimated noise=463.334 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0128204 Jy ! Component: 100 - total flux cleaned = 0.0202149 Jy ! Component: 150 - total flux cleaned = 0.0247278 Jy ! Component: 200 - total flux cleaned = 0.0277461 Jy ! Total flux subtracted in 200 components = 0.0277461 Jy ! Clean residual min=-0.001973 max=0.003157 Jy/beam ! Clean residual mean=0.000000 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.338579 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 56 components and 0.338579 Jy ! Inverting map ! Added new window around map position (-10, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0027741 Jy ! Component: 100 - total flux cleaned = 0.00405479 Jy ! Component: 150 - total flux cleaned = 0.00492308 Jy ! Component: 200 - total flux cleaned = 0.00546604 Jy ! Total flux subtracted in 200 components = 0.00546604 Jy ! Clean residual min=-0.001806 max=0.001757 Jy/beam ! Clean residual mean=0.000008 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.344045 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 81 components and 0.344045 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.477 mas, bmaj=9.175 mas, bpa=53.73 degrees ! Estimated noise=545.977 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000729339 Jy ! Component: 100 - total flux cleaned = 0.00108166 Jy ! Component: 150 - total flux cleaned = 0.00133392 Jy ! Component: 200 - total flux cleaned = 0.00139543 Jy ! Total flux subtracted in 200 components = 0.00139543 Jy ! Clean residual min=-0.001860 max=0.002274 Jy/beam ! Clean residual mean=0.000019 rms=0.000595 Jy/beam ! Combined flux in latest and established models = 0.345441 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.18659e-05 Jy ! Component: 100 - total flux cleaned = 0.000118498 Jy ! Component: 150 - total flux cleaned = 0.000146998 Jy ! Component: 200 - total flux cleaned = 0.000159839 Jy ! Total flux subtracted in 200 components = 0.000159839 Jy ! Clean residual min=-0.001846 max=0.002306 Jy/beam ! Clean residual mean=0.000020 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.3456 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 131 components and 0.3456 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.235 mas, bmaj=4.676 mas, bpa=-1.175 degrees ! Estimated noise=463.334 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000258845 Jy ! Component: 100 - total flux cleaned = -0.000197474 Jy ! Component: 150 - total flux cleaned = -0.0001414 Jy ! Component: 200 - total flux cleaned = -8.83146e-05 Jy ! Total flux subtracted in 200 components = -8.83146e-05 Jy ! Clean residual min=-0.001860 max=0.001740 Jy/beam ! Clean residual mean=0.000010 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.345512 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 154 components and 0.345512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146974Jy sigma=0.000690 ! Fit after self-cal, rms=0.146961Jy sigma=0.000690 wmodel J1229+6335_S_2017_05_01_pus_map.mod ! Writing 154 model components to file: J1229+6335_S_2017_05_01_pus_map.mod wobs J1229+6335_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J1229+6335_S_2017_05_01_pus_uvs.fits wwins J1229+6335_S_2017_05_01_pus_map.win ! wwins: Wrote 4 windows to J1229+6335_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000122565 Jy ! Component: 100 - total flux cleaned = 0.000306155 Jy ! Component: 150 - total flux cleaned = 0.000453834 Jy ! Component: 200 - total flux cleaned = 0.000626846 Jy ! Component: 250 - total flux cleaned = 0.00071124 Jy ! Component: 300 - total flux cleaned = 0.00087658 Jy ! Component: 350 - total flux cleaned = 0.00109178 Jy ! Component: 400 - total flux cleaned = 0.00124999 Jy ! Component: 450 - total flux cleaned = 0.00143211 Jy ! Component: 500 - total flux cleaned = 0.001662 Jy ! Component: 550 - total flux cleaned = 0.00181274 Jy ! Component: 600 - total flux cleaned = 0.00193653 Jy ! Component: 650 - total flux cleaned = 0.00205899 Jy ! Component: 700 - total flux cleaned = 0.00222795 Jy ! Component: 750 - total flux cleaned = 0.00237096 Jy ! Component: 800 - total flux cleaned = 0.00255872 Jy ! Component: 850 - total flux cleaned = 0.00267431 Jy ! Component: 900 - total flux cleaned = 0.00276586 Jy ! Component: 950 - total flux cleaned = 0.00285663 Jy ! Component: 1000 - total flux cleaned = 0.00301342 Jy ! Component: 1050 - total flux cleaned = 0.00310196 Jy ! Component: 1100 - total flux cleaned = 0.00318988 Jy ! Component: 1150 - total flux cleaned = 0.00329824 Jy ! Component: 1200 - total flux cleaned = 0.00331926 Jy ! Component: 1250 - total flux cleaned = 0.00336214 Jy ! Component: 1300 - total flux cleaned = 0.00342521 Jy ! Component: 1350 - total flux cleaned = 0.0034878 Jy ! Component: 1400 - total flux cleaned = 0.00348776 Jy ! Component: 1450 - total flux cleaned = 0.00359059 Jy ! Component: 1500 - total flux cleaned = 0.00363129 Jy ! Component: 1550 - total flux cleaned = 0.00371224 Jy ! Component: 1600 - total flux cleaned = 0.00375226 Jy ! Component: 1650 - total flux cleaned = 0.00377198 Jy ! Component: 1700 - total flux cleaned = 0.00383128 Jy ! Component: 1750 - total flux cleaned = 0.0037727 Jy ! Component: 1800 - total flux cleaned = 0.00385019 Jy ! Component: 1850 - total flux cleaned = 0.00377296 Jy ! Component: 1900 - total flux cleaned = 0.00383041 Jy ! Component: 1950 - total flux cleaned = 0.00386857 Jy ! Component: 2000 - total flux cleaned = 0.00383085 Jy ! Component: 2050 - total flux cleaned = 0.00384976 Jy ! Component: 2100 - total flux cleaned = 0.00386791 Jy ! Component: 2150 - total flux cleaned = 0.00394169 Jy ! Component: 2200 - total flux cleaned = 0.00388661 Jy ! Component: 2250 - total flux cleaned = 0.00395929 Jy ! Component: 2300 - total flux cleaned = 0.00385082 Jy ! Component: 2350 - total flux cleaned = 0.00392262 Jy ! Component: 2400 - total flux cleaned = 0.00392271 Jy ! Component: 2450 - total flux cleaned = 0.00395806 Jy ! Component: 2500 - total flux cleaned = 0.00395791 Jy ! Component: 2550 - total flux cleaned = 0.00397553 Jy ! Component: 2600 - total flux cleaned = 0.00399305 Jy ! Component: 2650 - total flux cleaned = 0.00401044 Jy ! Component: 2700 - total flux cleaned = 0.00401054 Jy ! Component: 2750 - total flux cleaned = 0.00404474 Jy ! Component: 2800 - total flux cleaned = 0.00407875 Jy ! Component: 2850 - total flux cleaned = 0.00409559 Jy ! Component: 2900 - total flux cleaned = 0.00401152 Jy ! Component: 2950 - total flux cleaned = 0.00416231 Jy ! Component: 3000 - total flux cleaned = 0.00416218 Jy ! Component: 3050 - total flux cleaned = 0.00422825 Jy ! Component: 3100 - total flux cleaned = 0.00422823 Jy ! Component: 3150 - total flux cleaned = 0.00424453 Jy ! Component: 3200 - total flux cleaned = 0.00422821 Jy ! Component: 3250 - total flux cleaned = 0.00432556 Jy ! Component: 3300 - total flux cleaned = 0.00432555 Jy ! Component: 3350 - total flux cleaned = 0.0044218 Jy ! Component: 3400 - total flux cleaned = 0.00437387 Jy ! Component: 3450 - total flux cleaned = 0.00440561 Jy ! Component: 3500 - total flux cleaned = 0.00443731 Jy ! Component: 3550 - total flux cleaned = 0.00443725 Jy ! Component: 3600 - total flux cleaned = 0.00453109 Jy ! Component: 3650 - total flux cleaned = 0.0044687 Jy ! Component: 3700 - total flux cleaned = 0.00454619 Jy ! Component: 3750 - total flux cleaned = 0.00459238 Jy ! Component: 3800 - total flux cleaned = 0.00456176 Jy ! Component: 3850 - total flux cleaned = 0.00466868 Jy ! Component: 3900 - total flux cleaned = 0.00459256 Jy ! Component: 3950 - total flux cleaned = 0.00462284 Jy ! Component: 4000 - total flux cleaned = 0.00471329 Jy ! Component: 4050 - total flux cleaned = 0.00474323 Jy ! Total flux subtracted in 4096 components = 0.00468343 Jy ! Clean residual min=-0.000849 max=0.000840 Jy/beam ! Clean residual mean=0.000005 rms=0.000277 Jy/beam ! Combined flux in latest and established models = 0.350196 Jy keep ! Adding 291 model components to the UV plane model. ! The established model now contains 445 components and 0.350195 Jy ![Exited script file: muppet] wmap "J1229+6335_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.235 x 4.676 at -1.175 degrees (North through East) ! Clean map min=-0.0013509 max=0.27642 Jy/beam ! Writing clean map to FITS file: J1229+6335_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.276422 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000276299 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.299867 0.299867 0.599734 1.19947 2.39894 4.79787 9.59574 19.1915 38.383 76.7659 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.276 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.235 x 4.676 at -1.175 degrees (North through East) ! Clean map min=-0.0013509 max=0.27642 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1229+6335_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:35:59 2019