! Started logfile: J1229+2711_S_2017_05_27_pus_uvs.log on Fri May 3 11:06:24 2019 obs J1229+2711_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1229+2711_S_2017_05_27_pus_uva.fits ! AN table 1: 142 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.940532 visibilities/baseline/integration-bin. ! Found source: J1229+2711 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 24040 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1229+2711_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 738 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.914726Jy sigma=0.021913 ! Fit after self-cal, rms=0.907082Jy sigma=0.021859 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.974 mas, bmaj=5.972 mas, bpa=-2.112 degrees ! Estimated noise=678.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0545953 Jy ! Component: 100 - total flux cleaned = 0.0742772 Jy ! Total flux subtracted in 100 components = 0.0742772 Jy ! Clean residual min=-0.012248 max=0.015302 Jy/beam ! Clean residual mean=0.000001 rms=0.003978 Jy/beam ! Combined flux in latest and established models = 0.0742773 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0742773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090029Jy sigma=0.001324 ! Fit after self-cal, rms=0.089652Jy sigma=0.001318 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.538 mas, bmaj=6.652 mas, bpa=-3.319 degrees ! Estimated noise=463.804 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.017455 Jy ! Component: 100 - total flux cleaned = 0.0265468 Jy ! Component: 150 - total flux cleaned = 0.0319028 Jy ! Component: 200 - total flux cleaned = 0.0351561 Jy ! Total flux subtracted in 200 components = 0.0351561 Jy ! Clean residual min=-0.009670 max=0.009682 Jy/beam ! Clean residual mean=0.000006 rms=0.002669 Jy/beam ! Combined flux in latest and established models = 0.109433 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 26 components and 0.109433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084455Jy sigma=0.001416 ! Fit after self-cal, rms=0.084121Jy sigma=0.001415 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.77 FD 0.85 HN 0.89 KP 0.95 ! LA 0.95 MK 0.90 NL 0.83 OV 0.94 ! PT 1.00 SC 0.75 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.92 HN 0.97 KP 0.92 ! LA 0.88 MK 0.93 NL 1.03 OV 1.00 ! PT 0.97 SC 0.76 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 18.62 FD 0.94 HN 0.98 KP 0.98 ! LA 0.96 MK 0.95 NL 1.01 OV 0.93 ! PT 0.99 SC 0.85 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 0.91 KP 1.00* ! LA 0.97 MK 0.90 NL 1.00* OV 1.00* ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.084121Jy sigma=0.001415 ! Fit after self-cal, rms=0.484065Jy sigma=0.000702 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.382 mas, bmaj=6.798 mas, bpa=-4.829 degrees ! Estimated noise=499.501 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000407286 Jy ! Component: 100 - total flux cleaned = -0.000765941 Jy ! Component: 150 - total flux cleaned = -0.00091641 Jy ! Component: 200 - total flux cleaned = -0.00103644 Jy ! Total flux subtracted in 200 components = -0.00103644 Jy ! Clean residual min=-0.003123 max=0.002478 Jy/beam ! Clean residual mean=0.000001 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.108397 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 34 components and 0.108397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.482927Jy sigma=0.000698 ! Fit after self-cal, rms=0.483095Jy sigma=0.000682 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.483095Jy sigma=0.000682 ! Fit after self-cal, rms=0.432323Jy sigma=0.000670 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.393 mas, bmaj=6.805 mas, bpa=-5.599 degrees ! Estimated noise=496.163 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00030659 Jy ! Component: 100 - total flux cleaned = -0.000510936 Jy ! Component: 150 - total flux cleaned = -0.000567892 Jy ! Component: 200 - total flux cleaned = -0.000568396 Jy ! Total flux subtracted in 200 components = -0.000568396 Jy ! Clean residual min=-0.001846 max=0.001855 Jy/beam ! Clean residual mean=0.000003 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.107829 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 40 components and 0.107829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.432045Jy sigma=0.000669 ! Fit after self-cal, rms=0.432041Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000210949 Jy ! Component: 100 - total flux cleaned = -0.000137843 Jy ! Component: 150 - total flux cleaned = -0.00016999 Jy ! Component: 200 - total flux cleaned = -0.000197806 Jy ! Total flux subtracted in 200 components = -0.000197806 Jy ! Clean residual min=-0.001750 max=0.001865 Jy/beam ! Clean residual mean=0.000004 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.107631 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 45 components and 0.107631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.431927Jy sigma=0.000669 ! Fit after self-cal, rms=0.431925Jy sigma=0.000669 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.431925Jy sigma=0.000669 ! Fit after self-cal, rms=0.328664Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.412 mas, bmaj=6.859 mas, bpa=-6.171 degrees ! Estimated noise=502.804 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.86163e-05 Jy ! Component: 100 - total flux cleaned = 5.33857e-05 Jy ! Component: 150 - total flux cleaned = -3.08537e-05 Jy ! Component: 200 - total flux cleaned = -0.000123173 Jy ! Total flux subtracted in 200 components = -0.000123173 Jy ! Clean residual min=-0.001608 max=0.001694 Jy/beam ! Clean residual mean=0.000003 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.107508 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 54 components and 0.107508 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.328586Jy sigma=0.000666 ! Fit after self-cal, rms=0.328576Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (100, 0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127495 Jy ! Component: 100 - total flux cleaned = 0.00134212 Jy ! Component: 150 - total flux cleaned = 0.00134361 Jy ! Component: 200 - total flux cleaned = 0.00134556 Jy ! Total flux subtracted in 200 components = 0.00134556 Jy ! Clean residual min=-0.001601 max=0.001624 Jy/beam ! Clean residual mean=0.000005 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.108853 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 66 components and 0.108853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.328552Jy sigma=0.000666 ! Fit after self-cal, rms=0.328550Jy sigma=0.000666 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.328550Jy sigma=0.000666 ! Fit after self-cal, rms=0.338328Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.451 mas, bmaj=10.6 mas, bpa=-10.69 degrees ! Estimated noise=625.694 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.55243e-05 Jy ! Component: 100 - total flux cleaned = -4.28917e-05 Jy ! Component: 150 - total flux cleaned = -0.000100241 Jy ! Component: 200 - total flux cleaned = -0.000126129 Jy ! Total flux subtracted in 200 components = -0.000126129 Jy ! Clean residual min=-0.001725 max=0.001838 Jy/beam ! Clean residual mean=0.000009 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.108727 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 71 components and 0.108727 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.338253Jy sigma=0.000666 ! Fit after self-cal, rms=0.338253Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000260534 Jy ! Component: 100 - total flux cleaned = -0.000238719 Jy ! Component: 150 - total flux cleaned = -0.0002197 Jy ! Component: 200 - total flux cleaned = -0.000185498 Jy ! Total flux subtracted in 200 components = -0.000185498 Jy ! Clean residual min=-0.001665 max=0.001829 Jy/beam ! Clean residual mean=0.000009 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.108541 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 78 components and 0.108541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.338215Jy sigma=0.000666 ! Fit after self-cal, rms=0.338214Jy sigma=0.000666 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.423 mas, bmaj=6.888 mas, bpa=-6.409 degrees ! Estimated noise=508.017 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.423 x 6.888 at -6.409 degrees (North through East) ! Clean map min=-0.001343 max=0.086049 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.823 mas, bmaj=6.067 mas, bpa=-5.289 degrees ! Estimated noise=822.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0666455 Jy ! Component: 100 - total flux cleaned = 0.0877768 Jy ! Component: 150 - total flux cleaned = 0.0966505 Jy ! Component: 200 - total flux cleaned = 0.10092 Jy ! Total flux subtracted in 200 components = 0.10092 Jy ! Clean residual min=-0.002377 max=0.002185 Jy/beam ! Clean residual mean=0.000001 rms=0.000570 Jy/beam ! Combined flux in latest and established models = 0.10092 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.10092 Jy ! Inverting map and beam ! Estimated beam: bmin=3.423 mas, bmaj=6.888 mas, bpa=-6.409 degrees ! Estimated noise=508.017 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00300814 Jy ! Component: 100 - total flux cleaned = 0.00477075 Jy ! Component: 150 - total flux cleaned = 0.00570091 Jy ! Component: 200 - total flux cleaned = 0.00628243 Jy ! Total flux subtracted in 200 components = 0.00628243 Jy ! Clean residual min=-0.001469 max=0.001580 Jy/beam ! Clean residual mean=0.000005 rms=0.000375 Jy/beam ! Combined flux in latest and established models = 0.107203 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 49 components and 0.107203 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.451 mas, bmaj=10.6 mas, bpa=-10.69 degrees ! Estimated noise=625.694 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000330398 Jy ! Component: 100 - total flux cleaned = 0.000635633 Jy ! Component: 150 - total flux cleaned = 0.000732467 Jy ! Component: 200 - total flux cleaned = 0.00073366 Jy ! Total flux subtracted in 200 components = 0.00073366 Jy ! Clean residual min=-0.001656 max=0.001805 Jy/beam ! Clean residual mean=0.000010 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.107936 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.92879e-05 Jy ! Component: 100 - total flux cleaned = 1.5515e-06 Jy ! Component: 150 - total flux cleaned = -1.38823e-05 Jy ! Component: 200 - total flux cleaned = -1.3126e-05 Jy ! Total flux subtracted in 200 components = -1.3126e-05 Jy ! Clean residual min=-0.001660 max=0.001820 Jy/beam ! Clean residual mean=0.000010 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.107923 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 75 components and 0.107923 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.423 mas, bmaj=6.888 mas, bpa=-6.409 degrees ! Estimated noise=508.017 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00037592 Jy ! Component: 100 - total flux cleaned = 0.000396868 Jy ! Component: 150 - total flux cleaned = 0.000458636 Jy ! Component: 200 - total flux cleaned = 0.000533241 Jy ! Total flux subtracted in 200 components = 0.000533241 Jy ! Clean residual min=-0.001474 max=0.001617 Jy/beam ! Clean residual mean=0.000005 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.108457 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 89 components and 0.108456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.338163Jy sigma=0.000665 ! Fit after self-cal, rms=0.338159Jy sigma=0.000665 wmodel J1229+2711_S_2017_05_27_pus_map.mod ! Writing 89 model components to file: J1229+2711_S_2017_05_27_pus_map.mod wobs J1229+2711_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1229+2711_S_2017_05_27_pus_uvs.fits wwins J1229+2711_S_2017_05_27_pus_map.win ! wwins: Wrote 2 windows to J1229+2711_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000327937 Jy ! Component: 100 - total flux cleaned = 0.000405994 Jy ! Component: 150 - total flux cleaned = 0.00040655 Jy ! Component: 200 - total flux cleaned = 0.000336045 Jy ! Component: 250 - total flux cleaned = 0.000312768 Jy ! Component: 300 - total flux cleaned = 0.000157632 Jy ! Component: 350 - total flux cleaned = 0.000135809 Jy ! Component: 400 - total flux cleaned = -1.24012e-05 Jy ! Component: 450 - total flux cleaned = -9.5266e-05 Jy ! Component: 500 - total flux cleaned = -0.000196671 Jy ! Component: 550 - total flux cleaned = -0.000256552 Jy ! Component: 600 - total flux cleaned = -0.000314977 Jy ! Component: 650 - total flux cleaned = -0.000277043 Jy ! Component: 700 - total flux cleaned = -0.000296312 Jy ! Component: 750 - total flux cleaned = -0.000314896 Jy ! Component: 800 - total flux cleaned = -0.000259928 Jy ! Component: 850 - total flux cleaned = -0.000259873 Jy ! Component: 900 - total flux cleaned = -0.000277647 Jy ! Component: 950 - total flux cleaned = -0.000277636 Jy ! Component: 1000 - total flux cleaned = -0.000294752 Jy ! Component: 1050 - total flux cleaned = -0.000260567 Jy ! Component: 1100 - total flux cleaned = -0.00027759 Jy ! Component: 1150 - total flux cleaned = -0.000294168 Jy ! Component: 1200 - total flux cleaned = -0.000228753 Jy ! Component: 1250 - total flux cleaned = -0.000228841 Jy ! Component: 1300 - total flux cleaned = -0.000261157 Jy ! Component: 1350 - total flux cleaned = -0.000261041 Jy ! Component: 1400 - total flux cleaned = -0.000229616 Jy ! Component: 1450 - total flux cleaned = -0.000183214 Jy ! Component: 1500 - total flux cleaned = -0.00024488 Jy ! Component: 1550 - total flux cleaned = -0.000244885 Jy ! Component: 1600 - total flux cleaned = -0.000305228 Jy ! Component: 1650 - total flux cleaned = -0.000320142 Jy ! Component: 1700 - total flux cleaned = -0.000320173 Jy ! Component: 1750 - total flux cleaned = -0.000394095 Jy ! Component: 1800 - total flux cleaned = -0.000452406 Jy ! Component: 1850 - total flux cleaned = -0.000437822 Jy ! Component: 1900 - total flux cleaned = -0.000509851 Jy ! Component: 1950 - total flux cleaned = -0.000509637 Jy ! Component: 2000 - total flux cleaned = -0.000580488 Jy ! Component: 2050 - total flux cleaned = -0.000594509 Jy ! Component: 2100 - total flux cleaned = -0.000636482 Jy ! Component: 2150 - total flux cleaned = -0.000677855 Jy ! Component: 2200 - total flux cleaned = -0.000732761 Jy ! Component: 2250 - total flux cleaned = -0.000760044 Jy ! Component: 2300 - total flux cleaned = -0.000759932 Jy ! Component: 2350 - total flux cleaned = -0.000786867 Jy ! Component: 2400 - total flux cleaned = -0.000786882 Jy ! Component: 2450 - total flux cleaned = -0.000800165 Jy ! Component: 2500 - total flux cleaned = -0.000878956 Jy ! Component: 2550 - total flux cleaned = -0.000865836 Jy ! Component: 2600 - total flux cleaned = -0.000917702 Jy ! Component: 2650 - total flux cleaned = -0.000943392 Jy ! Component: 2700 - total flux cleaned = -0.000956285 Jy ! Component: 2750 - total flux cleaned = -0.000994537 Jy ! Component: 2800 - total flux cleaned = -0.00100706 Jy ! Component: 2850 - total flux cleaned = -0.00105736 Jy ! Component: 2900 - total flux cleaned = -0.00106985 Jy ! Component: 2950 - total flux cleaned = -0.00110718 Jy ! Component: 3000 - total flux cleaned = -0.00118139 Jy ! Component: 3050 - total flux cleaned = -0.00123045 Jy ! Component: 3100 - total flux cleaned = -0.00129163 Jy ! Component: 3150 - total flux cleaned = -0.00134012 Jy ! Component: 3200 - total flux cleaned = -0.00135209 Jy ! Component: 3250 - total flux cleaned = -0.00143618 Jy ! Component: 3300 - total flux cleaned = -0.00143616 Jy ! Component: 3350 - total flux cleaned = -0.00149567 Jy ! Component: 3400 - total flux cleaned = -0.00150753 Jy ! Component: 3450 - total flux cleaned = -0.00153119 Jy ! Component: 3500 - total flux cleaned = -0.00160141 Jy ! Component: 3550 - total flux cleaned = -0.00164807 Jy ! Component: 3600 - total flux cleaned = -0.00167117 Jy ! Component: 3650 - total flux cleaned = -0.0017171 Jy ! Component: 3700 - total flux cleaned = -0.00169416 Jy ! Component: 3750 - total flux cleaned = -0.00172841 Jy ! Component: 3800 - total flux cleaned = -0.00177379 Jy ! Component: 3850 - total flux cleaned = -0.00178504 Jy ! Component: 3900 - total flux cleaned = -0.00185242 Jy ! Component: 3950 - total flux cleaned = -0.00189703 Jy ! Component: 4000 - total flux cleaned = -0.00195251 Jy ! Component: 4050 - total flux cleaned = -0.00198566 Jy ! Total flux subtracted in 4096 components = -0.00194169 Jy ! Clean residual min=-0.000793 max=0.000684 Jy/beam ! Clean residual mean=0.000000 rms=0.000207 Jy/beam ! Combined flux in latest and established models = 0.106515 Jy keep ! Adding 305 model components to the UV plane model. ! The established model now contains 394 components and 0.106515 Jy ![Exited script file: muppet] wmap "J1229+2711_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.423 x 6.888 at -6.409 degrees (North through East) ! Clean map min=-0.0010984 max=0.086355 Jy/beam ! Writing clean map to FITS file: J1229+2711_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0863553 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000206256 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.716536 0.716536 1.43307 2.86615 5.73229 11.4646 22.9292 45.8583 91.7166 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.086 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.423 x 6.888 at -6.409 degrees (North through East) ! Clean map min=-0.0010984 max=0.086355 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1229+2711_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:06:29 2019