! Started logfile: J1228+3706_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:47:51 2019 obs J1228+3706_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J1228+3706_S_2017_05_31_pus_uva.fits ! AN table 1: 23 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.323671 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1228+3706 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 1340 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1228+3706_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 230 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.629342Jy sigma=0.006020 ! Fit after self-cal, rms=0.625957Jy sigma=0.005989 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.861 mas, bmaj=7.264 mas, bpa=28.98 degrees ! Estimated noise=3019.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.293026 Jy ! Component: 100 - total flux cleaned = 0.358698 Jy ! Total flux subtracted in 100 components = 0.358698 Jy ! Clean residual min=-0.013902 max=0.023219 Jy/beam ! Clean residual mean=0.000014 rms=0.004191 Jy/beam ! Combined flux in latest and established models = 0.358698 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.358698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094150Jy sigma=0.000809 ! Fit after self-cal, rms=0.094112Jy sigma=0.000809 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.28 mas, bmaj=7.754 mas, bpa=31.85 degrees ! Estimated noise=2378.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0272926 Jy ! Component: 100 - total flux cleaned = 0.0397974 Jy ! Component: 150 - total flux cleaned = 0.0423987 Jy ! Component: 200 - total flux cleaned = 0.044305 Jy ! Total flux subtracted in 200 components = 0.044305 Jy ! Clean residual min=-0.009387 max=0.010125 Jy/beam ! Clean residual mean=0.000030 rms=0.002506 Jy/beam ! Combined flux in latest and established models = 0.403003 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 26 components and 0.403003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085580Jy sigma=0.000734 ! Fit after self-cal, rms=0.085475Jy sigma=0.000733 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00* HN 1.00* KP 1.00 ! LA 0.99 MK 1.00* NL 0.91 OV 1.00* ! PT 1.05 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.00* HN 1.00* KP 0.96 ! LA 0.97 MK 1.00* NL 1.06 OV 1.00* ! PT 1.02 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 1.00* HN 1.00* KP 1.00 ! LA 0.99 MK 1.00* NL 1.00 OV 1.00* ! PT 0.98 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.085475Jy sigma=0.000733 ! Fit after self-cal, rms=0.074159Jy sigma=0.000667 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.316 mas, bmaj=7.768 mas, bpa=31.94 degrees ! Estimated noise=2360.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00190289 Jy ! Component: 100 - total flux cleaned = -0.00189613 Jy ! Component: 150 - total flux cleaned = -0.00172425 Jy ! Component: 200 - total flux cleaned = -0.00157423 Jy ! Total flux subtracted in 200 components = -0.00157423 Jy ! Clean residual min=-0.008878 max=0.009798 Jy/beam ! Clean residual mean=0.000023 rms=0.002217 Jy/beam ! Combined flux in latest and established models = 0.401428 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 37 components and 0.401428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073819Jy sigma=0.000665 ! Fit after self-cal, rms=0.073786Jy sigma=0.000665 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073786Jy sigma=0.000665 ! Fit after self-cal, rms=0.069290Jy sigma=0.000625 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.296 mas, bmaj=7.815 mas, bpa=31.66 degrees ! Estimated noise=2358.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000664619 Jy ! Component: 100 - total flux cleaned = -0.000673936 Jy ! Component: 150 - total flux cleaned = -0.000730236 Jy ! Component: 200 - total flux cleaned = -0.000766461 Jy ! Total flux subtracted in 200 components = -0.000766461 Jy ! Clean residual min=-0.004922 max=0.004825 Jy/beam ! Clean residual mean=-0.000017 rms=0.001280 Jy/beam ! Combined flux in latest and established models = 0.400662 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 49 components and 0.400662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069149Jy sigma=0.000624 ! Fit after self-cal, rms=0.069159Jy sigma=0.000623 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.67108e-05 Jy ! Component: 100 - total flux cleaned = 9.60186e-05 Jy ! Component: 150 - total flux cleaned = 4.4895e-05 Jy ! Component: 200 - total flux cleaned = 2.43906e-05 Jy ! Total flux subtracted in 200 components = 2.43906e-05 Jy ! Clean residual min=-0.004792 max=0.004820 Jy/beam ! Clean residual mean=-0.000017 rms=0.001267 Jy/beam ! Combined flux in latest and established models = 0.400686 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 59 components and 0.400686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069129Jy sigma=0.000623 ! Fit after self-cal, rms=0.069122Jy sigma=0.000623 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069122Jy sigma=0.000623 ! Fit after self-cal, rms=0.069157Jy sigma=0.000623 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.29 mas, bmaj=7.824 mas, bpa=31.72 degrees ! Estimated noise=2359.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000202137 Jy ! Component: 100 - total flux cleaned = 0.000159856 Jy ! Component: 150 - total flux cleaned = 0.000161055 Jy ! Component: 200 - total flux cleaned = 0.000141289 Jy ! Total flux subtracted in 200 components = 0.000141289 Jy ! Clean residual min=-0.004801 max=0.004709 Jy/beam ! Clean residual mean=-0.000017 rms=0.001233 Jy/beam ! Combined flux in latest and established models = 0.400828 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 62 components and 0.400828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069123Jy sigma=0.000622 ! Fit after self-cal, rms=0.069119Jy sigma=0.000622 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000268397 Jy ! Component: 100 - total flux cleaned = 0.000247029 Jy ! Component: 150 - total flux cleaned = 0.00023086 Jy ! Component: 200 - total flux cleaned = 0.000215944 Jy ! Total flux subtracted in 200 components = 0.000215944 Jy ! Clean residual min=-0.004758 max=0.004653 Jy/beam ! Clean residual mean=-0.000017 rms=0.001229 Jy/beam ! Combined flux in latest and established models = 0.401044 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 70 components and 0.401044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069105Jy sigma=0.000622 ! Fit after self-cal, rms=0.069103Jy sigma=0.000622 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069103Jy sigma=0.000622 ! Fit after self-cal, rms=0.069116Jy sigma=0.000622 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.537 mas, bmaj=9.647 mas, bpa=10.05 degrees ! Estimated noise=2700.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000362695 Jy ! Component: 100 - total flux cleaned = 0.000212531 Jy ! Component: 150 - total flux cleaned = 0.000112886 Jy ! Component: 200 - total flux cleaned = 8.477e-05 Jy ! Total flux subtracted in 200 components = 8.477e-05 Jy ! Clean residual min=-0.005449 max=0.004169 Jy/beam ! Clean residual mean=-0.000031 rms=0.001471 Jy/beam ! Combined flux in latest and established models = 0.401128 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 79 components and 0.401128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069107Jy sigma=0.000622 ! Fit after self-cal, rms=0.069101Jy sigma=0.000622 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.57354e-08 Jy ! Component: 100 - total flux cleaned = -3.50602e-05 Jy ! Component: 150 - total flux cleaned = -8.73158e-05 Jy ! Component: 200 - total flux cleaned = -0.000109636 Jy ! Total flux subtracted in 200 components = -0.000109636 Jy ! Clean residual min=-0.005432 max=0.004154 Jy/beam ! Clean residual mean=-0.000031 rms=0.001467 Jy/beam ! Combined flux in latest and established models = 0.401019 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 93 components and 0.401019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069097Jy sigma=0.000622 ! Fit after self-cal, rms=0.069093Jy sigma=0.000622 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.286 mas, bmaj=7.826 mas, bpa=31.76 degrees ! Estimated noise=2359.62 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.286 x 7.826 at 31.76 degrees (North through East) ! Clean map min=-0.0045624 max=0.37089 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.852 mas, bmaj=7.32 mas, bpa=28.92 degrees ! Estimated noise=2999.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.290903 Jy ! Component: 100 - total flux cleaned = 0.35711 Jy ! Component: 150 - total flux cleaned = 0.382503 Jy ! Component: 200 - total flux cleaned = 0.394334 Jy ! Total flux subtracted in 200 components = 0.394334 Jy ! Clean residual min=-0.007167 max=0.006460 Jy/beam ! Clean residual mean=-0.000028 rms=0.001777 Jy/beam ! Combined flux in latest and established models = 0.394334 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.394334 Jy ! Inverting map and beam ! Estimated beam: bmin=4.286 mas, bmaj=7.826 mas, bpa=31.76 degrees ! Estimated noise=2359.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00603665 Jy ! Component: 100 - total flux cleaned = 0.00650192 Jy ! Component: 150 - total flux cleaned = 0.00671691 Jy ! Component: 200 - total flux cleaned = 0.00688364 Jy ! Total flux subtracted in 200 components = 0.00688364 Jy ! Clean residual min=-0.004835 max=0.004397 Jy/beam ! Clean residual mean=-0.000017 rms=0.001253 Jy/beam ! Combined flux in latest and established models = 0.401218 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 27 components and 0.401218 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.537 mas, bmaj=9.647 mas, bpa=10.05 degrees ! Estimated noise=2700.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.28972e-05 Jy ! Component: 100 - total flux cleaned = -6.64971e-06 Jy ! Component: 150 - total flux cleaned = -9.11274e-05 Jy ! Component: 200 - total flux cleaned = -0.00016512 Jy ! Total flux subtracted in 200 components = -0.00016512 Jy ! Clean residual min=-0.005442 max=0.004311 Jy/beam ! Clean residual mean=-0.000031 rms=0.001472 Jy/beam ! Combined flux in latest and established models = 0.401053 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.05586e-05 Jy ! Component: 100 - total flux cleaned = -8.2383e-05 Jy ! Component: 150 - total flux cleaned = -9.67493e-05 Jy ! Component: 200 - total flux cleaned = -0.000110331 Jy ! Total flux subtracted in 200 components = -0.000110331 Jy ! Clean residual min=-0.005432 max=0.004284 Jy/beam ! Clean residual mean=-0.000031 rms=0.001467 Jy/beam ! Combined flux in latest and established models = 0.400942 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 37 components and 0.400942 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.286 mas, bmaj=7.826 mas, bpa=31.76 degrees ! Estimated noise=2359.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.95011e-05 Jy ! Component: 100 - total flux cleaned = 4.97841e-05 Jy ! Component: 150 - total flux cleaned = 4.96218e-05 Jy ! Component: 200 - total flux cleaned = 7.75575e-05 Jy ! Total flux subtracted in 200 components = 7.75575e-05 Jy ! Clean residual min=-0.004791 max=0.004490 Jy/beam ! Clean residual mean=-0.000017 rms=0.001218 Jy/beam ! Combined flux in latest and established models = 0.40102 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 42 components and 0.40102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069098Jy sigma=0.000622 ! Fit after self-cal, rms=0.069093Jy sigma=0.000622 wmodel J1228+3706_S_2017_05_31_pus_map.mod ! Writing 42 model components to file: J1228+3706_S_2017_05_31_pus_map.mod wobs J1228+3706_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J1228+3706_S_2017_05_31_pus_uvs.fits wwins J1228+3706_S_2017_05_31_pus_map.win ! wwins: Wrote 1 windows to J1228+3706_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0017525 Jy ! Component: 100 - total flux cleaned = -0.00214569 Jy ! Component: 150 - total flux cleaned = -0.00251476 Jy ! Component: 200 - total flux cleaned = -0.00265848 Jy ! Component: 250 - total flux cleaned = -0.00285866 Jy ! Component: 300 - total flux cleaned = -0.0029859 Jy ! Component: 350 - total flux cleaned = -0.00280173 Jy ! Component: 400 - total flux cleaned = -0.00292136 Jy ! Component: 450 - total flux cleaned = -0.00286427 Jy ! Component: 500 - total flux cleaned = -0.00286595 Jy ! Component: 550 - total flux cleaned = -0.00286646 Jy ! Component: 600 - total flux cleaned = -0.0028167 Jy ! Component: 650 - total flux cleaned = -0.00286721 Jy ! Component: 700 - total flux cleaned = -0.00305814 Jy ! Component: 750 - total flux cleaned = -0.00305772 Jy ! Component: 800 - total flux cleaned = -0.00305734 Jy ! Component: 850 - total flux cleaned = -0.00292944 Jy ! Component: 900 - total flux cleaned = -0.00284656 Jy ! Component: 950 - total flux cleaned = -0.00276675 Jy ! Component: 1000 - total flux cleaned = -0.00276612 Jy ! Component: 1050 - total flux cleaned = -0.00268875 Jy ! Component: 1100 - total flux cleaned = -0.00268943 Jy ! Component: 1150 - total flux cleaned = -0.00268963 Jy ! Component: 1200 - total flux cleaned = -0.00272631 Jy ! Component: 1250 - total flux cleaned = -0.00265592 Jy ! Component: 1300 - total flux cleaned = -0.00272509 Jy ! Component: 1350 - total flux cleaned = -0.00269131 Jy ! Component: 1400 - total flux cleaned = -0.00272523 Jy ! Component: 1450 - total flux cleaned = -0.00272585 Jy ! Component: 1500 - total flux cleaned = -0.00269369 Jy ! Component: 1550 - total flux cleaned = -0.00269401 Jy ! Component: 1600 - total flux cleaned = -0.00272453 Jy ! Component: 1650 - total flux cleaned = -0.00269369 Jy ! Component: 1700 - total flux cleaned = -0.00266378 Jy ! Component: 1750 - total flux cleaned = -0.00275248 Jy ! Component: 1800 - total flux cleaned = -0.00278186 Jy ! Component: 1850 - total flux cleaned = -0.00278187 Jy ! Component: 1900 - total flux cleaned = -0.00269728 Jy ! Component: 1950 - total flux cleaned = -0.00278045 Jy ! Component: 2000 - total flux cleaned = -0.00267018 Jy ! Component: 2050 - total flux cleaned = -0.0025347 Jy ! Component: 2100 - total flux cleaned = -0.00245411 Jy ! Component: 2150 - total flux cleaned = -0.00237423 Jy ! Component: 2200 - total flux cleaned = -0.00221673 Jy ! Component: 2250 - total flux cleaned = -0.00221644 Jy ! Component: 2300 - total flux cleaned = -0.00211326 Jy ! Component: 2350 - total flux cleaned = -0.00203662 Jy ! Component: 2400 - total flux cleaned = -0.00188545 Jy ! Component: 2450 - total flux cleaned = -0.00181077 Jy ! Component: 2500 - total flux cleaned = -0.00181084 Jy ! Component: 2550 - total flux cleaned = -0.00173729 Jy ! Component: 2600 - total flux cleaned = -0.00173744 Jy ! Component: 2650 - total flux cleaned = -0.00171314 Jy ! Component: 2700 - total flux cleaned = -0.00166494 Jy ! Component: 2750 - total flux cleaned = -0.00161724 Jy ! Component: 2800 - total flux cleaned = -0.00154621 Jy ! Component: 2850 - total flux cleaned = -0.00159351 Jy ! Component: 2900 - total flux cleaned = -0.00159361 Jy ! Component: 2950 - total flux cleaned = -0.00159375 Jy ! Component: 3000 - total flux cleaned = -0.00161701 Jy ! Component: 3050 - total flux cleaned = -0.00157044 Jy ! Component: 3100 - total flux cleaned = -0.00152391 Jy ! Component: 3150 - total flux cleaned = -0.00150065 Jy ! Component: 3200 - total flux cleaned = -0.00152369 Jy ! Component: 3250 - total flux cleaned = -0.00145445 Jy ! Component: 3300 - total flux cleaned = -0.00145442 Jy ! Component: 3350 - total flux cleaned = -0.00145441 Jy ! Component: 3400 - total flux cleaned = -0.0014777 Jy ! Component: 3450 - total flux cleaned = -0.00147759 Jy ! Component: 3500 - total flux cleaned = -0.00147763 Jy ! Component: 3550 - total flux cleaned = -0.00150067 Jy ! Component: 3600 - total flux cleaned = -0.00154706 Jy ! Component: 3650 - total flux cleaned = -0.00159351 Jy ! Component: 3700 - total flux cleaned = -0.0016167 Jy ! Component: 3750 - total flux cleaned = -0.0016634 Jy ! Component: 3800 - total flux cleaned = -0.00164021 Jy ! Component: 3850 - total flux cleaned = -0.00168698 Jy ! Component: 3900 - total flux cleaned = -0.00178116 Jy ! Component: 3950 - total flux cleaned = -0.00187561 Jy ! Component: 4000 - total flux cleaned = -0.00197055 Jy ! Component: 4050 - total flux cleaned = -0.0020185 Jy ! Total flux subtracted in 4096 components = -0.00206623 Jy ! Clean residual min=-0.001502 max=0.001435 Jy/beam ! Clean residual mean=-0.000019 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.398954 Jy keep ! Adding 239 model components to the UV plane model. ! The established model now contains 281 components and 0.398954 Jy ![Exited script file: muppet] wmap "J1228+3706_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.286 x 7.826 at 31.76 degrees (North through East) ! Clean map min=-0.0036107 max=0.37113 Jy/beam ! Writing clean map to FITS file: J1228+3706_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.371125 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000365667 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.295588 0.295588 0.591176 1.18235 2.3647 4.72941 9.45881 18.9176 37.8353 75.6705 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.371 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.286 x 7.826 at 31.76 degrees (North through East) ! Clean map min=-0.0036107 max=0.37113 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1228+3706_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:47:56 2019