! Started logfile: J1228+3706_S_2017_05_27_pus_uvs.log on Fri May 3 11:06:20 2019 obs J1228+3706_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1228+3706_S_2017_05_27_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.672222 visibilities/baseline/integration-bin. ! Found source: J1228+3706 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 968 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1228+3706_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.601703Jy sigma=0.006079 ! Fit after self-cal, rms=0.598406Jy sigma=0.006049 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.585 mas, bmaj=7.916 mas, bpa=1.637 degrees ! Estimated noise=3072.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.306658 Jy ! Component: 100 - total flux cleaned = 0.373747 Jy ! Total flux subtracted in 100 components = 0.373747 Jy ! Clean residual min=-0.016412 max=0.021697 Jy/beam ! Clean residual mean=0.000030 rms=0.004611 Jy/beam ! Combined flux in latest and established models = 0.373747 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.373747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107796Jy sigma=0.000824 ! Fit after self-cal, rms=0.107812Jy sigma=0.000824 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.064 mas, bmaj=8.611 mas, bpa=4.28 degrees ! Estimated noise=2590.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (54, -78). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0294255 Jy ! Component: 100 - total flux cleaned = 0.0396833 Jy ! Component: 150 - total flux cleaned = 0.0400749 Jy ! Component: 200 - total flux cleaned = 0.0412807 Jy ! Total flux subtracted in 200 components = 0.0412807 Jy ! Clean residual min=-0.011357 max=0.012608 Jy/beam ! Clean residual mean=0.000008 rms=0.002985 Jy/beam ! Combined flux in latest and established models = 0.415028 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 36 components and 0.415028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096841Jy sigma=0.000741 ! Fit after self-cal, rms=0.096468Jy sigma=0.000738 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.96 HN 0.96 KP 0.99 ! LA 0.96 MK 1.05 NL 1.00* OV 1.03 ! PT 1.06 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 1.00 KP 0.98 ! LA 0.95 MK 1.02 NL 1.00* OV 1.03 ! PT 1.01 SC 0.67 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.03 HN 1.05 KP 0.95 ! LA 0.98 MK 1.04 NL 1.00* OV 0.97 ! PT 1.00 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00 KP 1.00* ! LA 1.09 MK 1.01 NL 1.00* OV 1.00* ! PT 1.03 SC 1.00* ! ! ! Fit before self-cal, rms=0.096468Jy sigma=0.000738 ! Fit after self-cal, rms=0.072467Jy sigma=0.000658 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.059 mas, bmaj=8.555 mas, bpa=4.848 degrees ! Estimated noise=2566.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, -43.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00870576 Jy ! Component: 100 - total flux cleaned = 0.00831196 Jy ! Component: 150 - total flux cleaned = 0.00698196 Jy ! Component: 200 - total flux cleaned = 0.00655783 Jy ! Total flux subtracted in 200 components = 0.00655783 Jy ! Clean residual min=-0.006742 max=0.006957 Jy/beam ! Clean residual mean=0.000003 rms=0.001698 Jy/beam ! Combined flux in latest and established models = 0.421586 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 58 components and 0.421586 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070675Jy sigma=0.000642 ! Fit after self-cal, rms=0.070557Jy sigma=0.000641 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070557Jy sigma=0.000641 ! Fit after self-cal, rms=0.070256Jy sigma=0.000640 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.053 mas, bmaj=8.556 mas, bpa=4.847 degrees ! Estimated noise=2563.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111409 Jy ! Component: 100 - total flux cleaned = 0.000108023 Jy ! Component: 150 - total flux cleaned = -0.000677863 Jy ! Component: 200 - total flux cleaned = -0.00119022 Jy ! Total flux subtracted in 200 components = -0.00119022 Jy ! Clean residual min=-0.006538 max=0.006382 Jy/beam ! Clean residual mean=-0.000001 rms=0.001559 Jy/beam ! Combined flux in latest and established models = 0.420395 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 71 components and 0.420395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069824Jy sigma=0.000637 ! Fit after self-cal, rms=0.069808Jy sigma=0.000637 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-83.5, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0025501 Jy ! Component: 100 - total flux cleaned = 0.00166395 Jy ! Component: 150 - total flux cleaned = 0.00177919 Jy ! Component: 200 - total flux cleaned = 0.00137772 Jy ! Total flux subtracted in 200 components = 0.00137772 Jy ! Clean residual min=-0.005845 max=0.005187 Jy/beam ! Clean residual mean=0.000001 rms=0.001350 Jy/beam ! Combined flux in latest and established models = 0.421773 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 92 components and 0.421773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069139Jy sigma=0.000631 ! Fit after self-cal, rms=0.069122Jy sigma=0.000631 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069122Jy sigma=0.000631 ! Fit after self-cal, rms=0.069063Jy sigma=0.000630 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.05 mas, bmaj=8.56 mas, bpa=4.874 degrees ! Estimated noise=2563.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000408772 Jy ! Component: 100 - total flux cleaned = -0.000378615 Jy ! Component: 150 - total flux cleaned = -0.000830367 Jy ! Component: 200 - total flux cleaned = -0.00134183 Jy ! Total flux subtracted in 200 components = -0.00134183 Jy ! Clean residual min=-0.005346 max=0.004584 Jy/beam ! Clean residual mean=-0.000000 rms=0.001254 Jy/beam ! Combined flux in latest and established models = 0.420431 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 105 components and 0.420431 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068789Jy sigma=0.000628 ! Fit after self-cal, rms=0.068786Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.813e-05 Jy ! Component: 100 - total flux cleaned = -0.000523316 Jy ! Component: 150 - total flux cleaned = -0.00082148 Jy ! Component: 200 - total flux cleaned = -0.00110556 Jy ! Total flux subtracted in 200 components = -0.00110556 Jy ! Clean residual min=-0.005107 max=0.004406 Jy/beam ! Clean residual mean=-0.000000 rms=0.001205 Jy/beam ! Combined flux in latest and established models = 0.419326 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 116 components and 0.419326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068614Jy sigma=0.000626 ! Fit after self-cal, rms=0.068612Jy sigma=0.000626 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068612Jy sigma=0.000626 ! Fit after self-cal, rms=0.068616Jy sigma=0.000626 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.049 mas, bmaj=10.9 mas, bpa=16.51 degrees ! Estimated noise=3223.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00122162 Jy ! Component: 100 - total flux cleaned = -0.00177011 Jy ! Component: 150 - total flux cleaned = -0.00195458 Jy ! Component: 200 - total flux cleaned = -0.00195371 Jy ! Total flux subtracted in 200 components = -0.00195371 Jy ! Clean residual min=-0.004554 max=0.004899 Jy/beam ! Clean residual mean=0.000003 rms=0.001377 Jy/beam ! Combined flux in latest and established models = 0.417372 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 132 components and 0.417372 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068579Jy sigma=0.000626 ! Fit after self-cal, rms=0.068578Jy sigma=0.000626 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000283975 Jy ! Component: 100 - total flux cleaned = -0.00028381 Jy ! Component: 150 - total flux cleaned = -0.000324188 Jy ! Component: 200 - total flux cleaned = -0.000322725 Jy ! Total flux subtracted in 200 components = -0.000322725 Jy ! Clean residual min=-0.004550 max=0.004837 Jy/beam ! Clean residual mean=0.000003 rms=0.001347 Jy/beam ! Combined flux in latest and established models = 0.417049 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 140 components and 0.417049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068547Jy sigma=0.000626 ! Fit after self-cal, rms=0.068546Jy sigma=0.000626 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.049 mas, bmaj=8.566 mas, bpa=4.887 degrees ! Estimated noise=2565.17 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.049 x 8.566 at 4.887 degrees (North through East) ! Clean map min=-0.0053286 max=0.39153 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.586 mas, bmaj=7.863 mas, bpa=2.046 degrees ! Estimated noise=3062.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.305677 Jy ! Component: 100 - total flux cleaned = 0.372359 Jy ! Component: 150 - total flux cleaned = 0.394325 Jy ! Component: 200 - total flux cleaned = 0.40865 Jy ! Total flux subtracted in 200 components = 0.40865 Jy ! Clean residual min=-0.010823 max=0.011075 Jy/beam ! Clean residual mean=0.000013 rms=0.002546 Jy/beam ! Combined flux in latest and established models = 0.40865 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.40865 Jy ! Inverting map and beam ! Estimated beam: bmin=3.049 mas, bmaj=8.566 mas, bpa=4.887 degrees ! Estimated noise=2565.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5, 0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113444 Jy ! Component: 100 - total flux cleaned = 0.0144503 Jy ! Component: 150 - total flux cleaned = 0.01662 Jy ! Component: 200 - total flux cleaned = 0.0172847 Jy ! Total flux subtracted in 200 components = 0.0172847 Jy ! Clean residual min=-0.006880 max=0.006462 Jy/beam ! Clean residual mean=0.000008 rms=0.001656 Jy/beam ! Combined flux in latest and established models = 0.425935 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 39 components and 0.425935 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.049 mas, bmaj=10.9 mas, bpa=16.51 degrees ! Estimated noise=3223.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000186113 Jy ! Component: 100 - total flux cleaned = -0.00135014 Jy ! Component: 150 - total flux cleaned = -0.00279823 Jy ! Component: 200 - total flux cleaned = -0.00408984 Jy ! Total flux subtracted in 200 components = -0.00408984 Jy ! Clean residual min=-0.005156 max=0.006212 Jy/beam ! Clean residual mean=0.000003 rms=0.001663 Jy/beam ! Combined flux in latest and established models = 0.421845 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00124224 Jy ! Component: 100 - total flux cleaned = -0.00219477 Jy ! Component: 150 - total flux cleaned = -0.00285018 Jy ! Component: 200 - total flux cleaned = -0.00338699 Jy ! Total flux subtracted in 200 components = -0.00338699 Jy ! Clean residual min=-0.005092 max=0.005497 Jy/beam ! Clean residual mean=-0.000001 rms=0.001528 Jy/beam ! Combined flux in latest and established models = 0.418458 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 82 components and 0.418458 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.049 mas, bmaj=8.566 mas, bpa=4.887 degrees ! Estimated noise=2565.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000177259 Jy ! Component: 100 - total flux cleaned = -0.000157089 Jy ! Component: 150 - total flux cleaned = -0.000277315 Jy ! Component: 200 - total flux cleaned = -0.00099185 Jy ! Total flux subtracted in 200 components = -0.00099185 Jy ! Clean residual min=-0.005990 max=0.004692 Jy/beam ! Clean residual mean=0.000001 rms=0.001278 Jy/beam ! Combined flux in latest and established models = 0.417466 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 102 components and 0.417466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069030Jy sigma=0.000629 ! Fit after self-cal, rms=0.068973Jy sigma=0.000628 wmodel J1228+3706_S_2017_05_27_pus_map.mod ! Writing 102 model components to file: J1228+3706_S_2017_05_27_pus_map.mod wobs J1228+3706_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1228+3706_S_2017_05_27_pus_uvs.fits wwins J1228+3706_S_2017_05_27_pus_map.win ! wwins: Wrote 5 windows to J1228+3706_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00259034 Jy ! Component: 100 - total flux cleaned = -0.00361726 Jy ! Component: 150 - total flux cleaned = -0.00438893 Jy ! Component: 200 - total flux cleaned = -0.00496344 Jy ! Component: 250 - total flux cleaned = -0.00543311 Jy ! Component: 300 - total flux cleaned = -0.00587769 Jy ! Component: 350 - total flux cleaned = -0.00611922 Jy ! Component: 400 - total flux cleaned = -0.00653161 Jy ! Component: 450 - total flux cleaned = -0.00698771 Jy ! Component: 500 - total flux cleaned = -0.00731831 Jy ! Component: 550 - total flux cleaned = -0.00753329 Jy ! Component: 600 - total flux cleaned = -0.00779531 Jy ! Component: 650 - total flux cleaned = -0.00799671 Jy ! Component: 700 - total flux cleaned = -0.00799613 Jy ! Component: 750 - total flux cleaned = -0.00809199 Jy ! Component: 800 - total flux cleaned = -0.00818583 Jy ! Component: 850 - total flux cleaned = -0.00823219 Jy ! Component: 900 - total flux cleaned = -0.00836608 Jy ! Component: 950 - total flux cleaned = -0.00832163 Jy ! Component: 1000 - total flux cleaned = -0.00823643 Jy ! Component: 1050 - total flux cleaned = -0.00827837 Jy ! Component: 1100 - total flux cleaned = -0.00819617 Jy ! Component: 1150 - total flux cleaned = -0.00803604 Jy ! Component: 1200 - total flux cleaned = -0.00799729 Jy ! Component: 1250 - total flux cleaned = -0.00784291 Jy ! Component: 1300 - total flux cleaned = -0.00784261 Jy ! Component: 1350 - total flux cleaned = -0.00780566 Jy ! Component: 1400 - total flux cleaned = -0.00776984 Jy ! Component: 1450 - total flux cleaned = -0.00776964 Jy ! Component: 1500 - total flux cleaned = -0.00766496 Jy ! Component: 1550 - total flux cleaned = -0.00776805 Jy ! Component: 1600 - total flux cleaned = -0.00773411 Jy ! Component: 1650 - total flux cleaned = -0.00773415 Jy ! Component: 1700 - total flux cleaned = -0.0077339 Jy ! Component: 1750 - total flux cleaned = -0.00776604 Jy ! Component: 1800 - total flux cleaned = -0.00782942 Jy ! Component: 1850 - total flux cleaned = -0.00786073 Jy ! Component: 1900 - total flux cleaned = -0.00789234 Jy ! Component: 1950 - total flux cleaned = -0.0078926 Jy ! Component: 2000 - total flux cleaned = -0.00798309 Jy ! Component: 2050 - total flux cleaned = -0.00798324 Jy ! Component: 2100 - total flux cleaned = -0.00812874 Jy ! Component: 2150 - total flux cleaned = -0.00807127 Jy ! Component: 2200 - total flux cleaned = -0.00815709 Jy ! Component: 2250 - total flux cleaned = -0.00826937 Jy ! Component: 2300 - total flux cleaned = -0.0082969 Jy ! Component: 2350 - total flux cleaned = -0.00848972 Jy ! Component: 2400 - total flux cleaned = -0.00865303 Jy ! Component: 2450 - total flux cleaned = -0.0088145 Jy ! Component: 2500 - total flux cleaned = -0.00897439 Jy ! Component: 2550 - total flux cleaned = -0.00902737 Jy ! Component: 2600 - total flux cleaned = -0.00921039 Jy ! Component: 2650 - total flux cleaned = -0.00939166 Jy ! Component: 2700 - total flux cleaned = -0.00949478 Jy ! Component: 2750 - total flux cleaned = -0.0096222 Jy ! Component: 2800 - total flux cleaned = -0.00969808 Jy ! Component: 2850 - total flux cleaned = -0.00982377 Jy ! Component: 2900 - total flux cleaned = -0.00989848 Jy ! Component: 2950 - total flux cleaned = -0.00999747 Jy ! Component: 3000 - total flux cleaned = -0.0100712 Jy ! Component: 3050 - total flux cleaned = -0.0101689 Jy ! Component: 3100 - total flux cleaned = -0.0101931 Jy ! Component: 3150 - total flux cleaned = -0.0102174 Jy ! Component: 3200 - total flux cleaned = -0.0101933 Jy ! Component: 3250 - total flux cleaned = -0.0101934 Jy ! Component: 3300 - total flux cleaned = -0.0102176 Jy ! Component: 3350 - total flux cleaned = -0.0101935 Jy ! Component: 3400 - total flux cleaned = -0.0101695 Jy ! Component: 3450 - total flux cleaned = -0.0101456 Jy ! Component: 3500 - total flux cleaned = -0.0101933 Jy ! Component: 3550 - total flux cleaned = -0.0101933 Jy ! Component: 3600 - total flux cleaned = -0.0102175 Jy ! Component: 3650 - total flux cleaned = -0.0102174 Jy ! Component: 3700 - total flux cleaned = -0.0102175 Jy ! Component: 3750 - total flux cleaned = -0.0101688 Jy ! Component: 3800 - total flux cleaned = -0.0101443 Jy ! Component: 3850 - total flux cleaned = -0.0101197 Jy ! Component: 3900 - total flux cleaned = -0.0100952 Jy ! Component: 3950 - total flux cleaned = -0.0100457 Jy ! Component: 4000 - total flux cleaned = -0.0099957 Jy ! Component: 4050 - total flux cleaned = -0.00999571 Jy ! Total flux subtracted in 4096 components = -0.00999574 Jy ! Clean residual min=-0.001546 max=0.001508 Jy/beam ! Clean residual mean=0.000000 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 0.407471 Jy keep ! Adding 257 model components to the UV plane model. ! The established model now contains 359 components and 0.407471 Jy ![Exited script file: muppet] wmap "J1228+3706_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.049 x 8.566 at 4.887 degrees (North through East) ! Clean map min=-0.0049901 max=0.39031 Jy/beam ! Writing clean map to FITS file: J1228+3706_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.390314 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000409172 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.314495 0.314495 0.628989 1.25798 2.51596 5.03191 10.0638 20.1277 40.2553 80.5106 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.39 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.049 x 8.566 at 4.887 degrees (North through East) ! Clean map min=-0.0049901 max=0.39031 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1228+3706_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:06:24 2019