! Started logfile: J1228+3128_S_2017_05_01_pus_uvs.log on Wed May 1 18:35:45 2019 obs J1228+3128_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J1228+3128_S_2017_05_01_pus_uva.fits ! AN table 1: 84 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.84127 visibilities/baseline/integration-bin. ! Found source: J1228+3128 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 12720 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1228+3128_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 422 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.709914Jy sigma=0.020461 ! Fit after self-cal, rms=0.700147Jy sigma=0.020297 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.224 mas, bmaj=6.391 mas, bpa=-0.2303 degrees ! Estimated noise=1028.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.2059 Jy ! Component: 100 - total flux cleaned = 0.257161 Jy ! Total flux subtracted in 100 components = 0.257161 Jy ! Clean residual min=-0.039577 max=0.041577 Jy/beam ! Clean residual mean=-0.000002 rms=0.014620 Jy/beam ! Combined flux in latest and established models = 0.257161 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.257161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115965Jy sigma=0.004876 ! Fit after self-cal, rms=0.115960Jy sigma=0.004875 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.924 mas, bmaj=7.288 mas, bpa=2.079 degrees ! Estimated noise=663.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117926 Jy ! Component: 100 - total flux cleaned = 0.0113382 Jy ! Component: 150 - total flux cleaned = 0.0113342 Jy ! Component: 200 - total flux cleaned = 0.0109664 Jy ! Total flux subtracted in 200 components = 0.0109664 Jy ! Clean residual min=-0.045500 max=0.047886 Jy/beam ! Clean residual mean=-0.000007 rms=0.016318 Jy/beam ! Combined flux in latest and established models = 0.268127 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 16 components and 0.268127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111318Jy sigma=0.004928 ! Fit after self-cal, rms=0.111301Jy sigma=0.004928 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 0.78 HN 1.01 KP 0.90 ! LA 0.89 MK 1.09 NL 0.87 OV 0.92 ! PT 0.88 SC 0.90 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.81 HN 1.04 KP 0.88 ! LA 0.86 MK 1.07 NL 0.93 OV 0.95 ! PT 0.85 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.85 HN 1.02 KP 0.89 ! LA 0.89 MK 1.12 NL 0.93 OV 0.86 ! PT 0.86 SC 0.94 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.87 HN 1.09 KP 1.00* ! LA 33.28 MK 1.28 NL 1.00* OV 1.00* ! PT 0.91 SC 1.00* ! ! ! Fit before self-cal, rms=0.111301Jy sigma=0.004928 ! Fit after self-cal, rms=1.590557Jy sigma=0.000756 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.828 mas, bmaj=7.322 mas, bpa=3.19 degrees ! Estimated noise=659.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9.5, -17). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00625043 Jy ! Component: 100 - total flux cleaned = 0.00671706 Jy ! Component: 150 - total flux cleaned = 0.00745075 Jy ! Component: 200 - total flux cleaned = 0.00805292 Jy ! Total flux subtracted in 200 components = 0.00805292 Jy ! Clean residual min=-0.005385 max=0.005838 Jy/beam ! Clean residual mean=0.000002 rms=0.001426 Jy/beam ! Combined flux in latest and established models = 0.27618 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 32 components and 0.27618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.589962Jy sigma=0.000738 ! Fit after self-cal, rms=1.590294Jy sigma=0.000733 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.590294Jy sigma=0.000733 ! Fit after self-cal, rms=0.476071Jy sigma=0.000668 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.827 mas, bmaj=7.322 mas, bpa=3.863 degrees ! Estimated noise=658.706 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00435539 Jy ! Component: 100 - total flux cleaned = 0.00531293 Jy ! Component: 150 - total flux cleaned = 0.00561315 Jy ! Component: 200 - total flux cleaned = 0.00567606 Jy ! Total flux subtracted in 200 components = 0.00567606 Jy ! Clean residual min=-0.002583 max=0.002810 Jy/beam ! Clean residual mean=0.000004 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.281856 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 60 components and 0.281856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.476065Jy sigma=0.000664 ! Fit after self-cal, rms=0.476093Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-16.5, -12.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00277276 Jy ! Component: 100 - total flux cleaned = 0.00419961 Jy ! Component: 150 - total flux cleaned = 0.00439151 Jy ! Component: 200 - total flux cleaned = 0.00445096 Jy ! Total flux subtracted in 200 components = 0.00445096 Jy ! Clean residual min=-0.002316 max=0.002562 Jy/beam ! Clean residual mean=0.000003 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.286307 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 78 components and 0.286307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.476042Jy sigma=0.000662 ! Fit after self-cal, rms=0.476033Jy sigma=0.000662 ! Inverting map ! Added new window around map position (16.5, -24). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00178643 Jy ! Component: 100 - total flux cleaned = 0.00208414 Jy ! Component: 150 - total flux cleaned = 0.00254605 Jy ! Component: 200 - total flux cleaned = 0.00284272 Jy ! Total flux subtracted in 200 components = 0.00284272 Jy ! Clean residual min=-0.002123 max=0.002190 Jy/beam ! Clean residual mean=0.000002 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.28915 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 97 components and 0.28915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.475977Jy sigma=0.000661 ! Fit after self-cal, rms=0.475973Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.475973Jy sigma=0.000660 ! Fit after self-cal, rms=0.085876Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.818 mas, bmaj=7.315 mas, bpa=3.792 degrees ! Estimated noise=660.348 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159931 Jy ! Component: 100 - total flux cleaned = 0.00224966 Jy ! Component: 150 - total flux cleaned = 0.0023544 Jy ! Component: 200 - total flux cleaned = 0.00245238 Jy ! Total flux subtracted in 200 components = 0.00245238 Jy ! Clean residual min=-0.001966 max=0.002012 Jy/beam ! Clean residual mean=0.000000 rms=0.000493 Jy/beam ! Combined flux in latest and established models = 0.291602 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 111 components and 0.291602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085787Jy sigma=0.000658 ! Fit after self-cal, rms=0.085728Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000213817 Jy ! Component: 100 - total flux cleaned = 0.00030446 Jy ! Component: 150 - total flux cleaned = 0.000303128 Jy ! Component: 200 - total flux cleaned = 0.000345429 Jy ! Total flux subtracted in 200 components = 0.000345429 Jy ! Clean residual min=-0.001949 max=0.001910 Jy/beam ! Clean residual mean=0.000000 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.291948 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 120 components and 0.291948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085677Jy sigma=0.000658 ! Fit after self-cal, rms=0.085677Jy sigma=0.000658 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085677Jy sigma=0.000658 ! Fit after self-cal, rms=0.085702Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.761 mas, bmaj=9.71 mas, bpa=2.382 degrees ! Estimated noise=759.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.42394e-05 Jy ! Component: 100 - total flux cleaned = -0.000452326 Jy ! Component: 150 - total flux cleaned = -0.000726788 Jy ! Component: 200 - total flux cleaned = -0.000922677 Jy ! Total flux subtracted in 200 components = -0.000922677 Jy ! Clean residual min=-0.001703 max=0.001522 Jy/beam ! Clean residual mean=-0.000000 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.291025 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 141 components and 0.291025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085693Jy sigma=0.000658 ! Fit after self-cal, rms=0.085687Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.07141e-05 Jy ! Component: 100 - total flux cleaned = -0.000237732 Jy ! Component: 150 - total flux cleaned = -0.000319322 Jy ! Component: 200 - total flux cleaned = -0.000395429 Jy ! Total flux subtracted in 200 components = -0.000395429 Jy ! Clean residual min=-0.001637 max=0.001520 Jy/beam ! Clean residual mean=-0.000000 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.29063 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 155 components and 0.29063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085683Jy sigma=0.000657 ! Fit after self-cal, rms=0.085683Jy sigma=0.000657 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.813 mas, bmaj=7.312 mas, bpa=3.757 degrees ! Estimated noise=661.644 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.813 x 7.312 at 3.757 degrees (North through East) ! Clean map min=-0.0017841 max=0.26122 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.162 mas, bmaj=6.592 mas, bpa=2.472 degrees ! Estimated noise=1016.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.203503 Jy ! Component: 100 - total flux cleaned = 0.249274 Jy ! Component: 150 - total flux cleaned = 0.267501 Jy ! Component: 200 - total flux cleaned = 0.277986 Jy ! Total flux subtracted in 200 components = 0.277986 Jy ! Clean residual min=-0.004308 max=0.005459 Jy/beam ! Clean residual mean=0.000004 rms=0.001028 Jy/beam ! Combined flux in latest and established models = 0.277986 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.277986 Jy ! Inverting map and beam ! Estimated beam: bmin=3.813 mas, bmaj=7.312 mas, bpa=3.757 degrees ! Estimated noise=661.644 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00612408 Jy ! Component: 100 - total flux cleaned = 0.00952236 Jy ! Component: 150 - total flux cleaned = 0.0113835 Jy ! Component: 200 - total flux cleaned = 0.0132296 Jy ! Total flux subtracted in 200 components = 0.0132296 Jy ! Clean residual min=-0.003188 max=0.002354 Jy/beam ! Clean residual mean=0.000000 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 0.291216 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 37 components and 0.291216 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.761 mas, bmaj=9.71 mas, bpa=2.382 degrees ! Estimated noise=759.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000162077 Jy ! Component: 100 - total flux cleaned = 0.000148767 Jy ! Component: 150 - total flux cleaned = 0.000238179 Jy ! Component: 200 - total flux cleaned = 0.000272138 Jy ! Total flux subtracted in 200 components = 0.000272138 Jy ! Clean residual min=-0.001843 max=0.001752 Jy/beam ! Clean residual mean=-0.000000 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 0.291488 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.00453e-06 Jy ! Component: 100 - total flux cleaned = -3.09491e-05 Jy ! Component: 150 - total flux cleaned = -8.73224e-05 Jy ! Component: 200 - total flux cleaned = -0.000139998 Jy ! Total flux subtracted in 200 components = -0.000139998 Jy ! Clean residual min=-0.001772 max=0.001719 Jy/beam ! Clean residual mean=-0.000000 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.291348 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 72 components and 0.291348 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.813 mas, bmaj=7.312 mas, bpa=3.757 degrees ! Estimated noise=661.644 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00207577 Jy ! Component: 100 - total flux cleaned = 0.00251405 Jy ! Component: 150 - total flux cleaned = 0.00271771 Jy ! Component: 200 - total flux cleaned = 0.00297058 Jy ! Total flux subtracted in 200 components = 0.00297058 Jy ! Clean residual min=-0.002131 max=0.002197 Jy/beam ! Clean residual mean=-0.000001 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.294318 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 88 components and 0.294318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085941Jy sigma=0.000660 ! Fit after self-cal, rms=0.085942Jy sigma=0.000659 wmodel J1228+3128_S_2017_05_01_pus_map.mod ! Writing 88 model components to file: J1228+3128_S_2017_05_01_pus_map.mod wobs J1228+3128_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J1228+3128_S_2017_05_01_pus_uvs.fits wwins J1228+3128_S_2017_05_01_pus_map.win ! wwins: Wrote 4 windows to J1228+3128_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00036872 Jy ! Component: 100 - total flux cleaned = 0.000442742 Jy ! Component: 150 - total flux cleaned = 0.000443349 Jy ! Component: 200 - total flux cleaned = 0.000377191 Jy ! Component: 250 - total flux cleaned = 0.00031182 Jy ! Component: 300 - total flux cleaned = 0.000248186 Jy ! Component: 350 - total flux cleaned = 0.000218287 Jy ! Component: 400 - total flux cleaned = 0.000218515 Jy ! Component: 450 - total flux cleaned = 0.000276784 Jy ! Component: 500 - total flux cleaned = 0.00024796 Jy ! Component: 550 - total flux cleaned = 0.000332674 Jy ! Component: 600 - total flux cleaned = 0.00041539 Jy ! Component: 650 - total flux cleaned = 0.000442375 Jy ! Component: 700 - total flux cleaned = 0.000575778 Jy ! Component: 750 - total flux cleaned = 0.000523883 Jy ! Component: 800 - total flux cleaned = 0.00067915 Jy ! Component: 850 - total flux cleaned = 0.00075541 Jy ! Component: 900 - total flux cleaned = 0.000805625 Jy ! Component: 950 - total flux cleaned = 0.000904318 Jy ! Component: 1000 - total flux cleaned = 0.000904065 Jy ! Component: 1050 - total flux cleaned = 0.000904501 Jy ! Component: 1100 - total flux cleaned = 0.000975611 Jy ! Component: 1150 - total flux cleaned = 0.000951895 Jy ! Component: 1200 - total flux cleaned = 0.000882785 Jy ! Component: 1250 - total flux cleaned = 0.00095148 Jy ! Component: 1300 - total flux cleaned = 0.000883594 Jy ! Component: 1350 - total flux cleaned = 0.000950601 Jy ! Component: 1400 - total flux cleaned = 0.000928233 Jy ! Component: 1450 - total flux cleaned = 0.000928197 Jy ! Component: 1500 - total flux cleaned = 0.000884836 Jy ! Component: 1550 - total flux cleaned = 0.000906347 Jy ! Component: 1600 - total flux cleaned = 0.000884956 Jy ! Component: 1650 - total flux cleaned = 0.00090604 Jy ! Component: 1700 - total flux cleaned = 0.000906199 Jy ! Component: 1750 - total flux cleaned = 0.000946621 Jy ! Component: 1800 - total flux cleaned = 0.0009263 Jy ! Component: 1850 - total flux cleaned = 0.000946376 Jy ! Component: 1900 - total flux cleaned = 0.000966392 Jy ! Component: 1950 - total flux cleaned = 0.00100579 Jy ! Component: 2000 - total flux cleaned = 0.00106431 Jy ! Component: 2050 - total flux cleaned = 0.00112199 Jy ! Component: 2100 - total flux cleaned = 0.00108402 Jy ! Component: 2150 - total flux cleaned = 0.00108396 Jy ! Component: 2200 - total flux cleaned = 0.001103 Jy ! Component: 2250 - total flux cleaned = 0.00110292 Jy ! Component: 2300 - total flux cleaned = 0.00112117 Jy ! Component: 2350 - total flux cleaned = 0.00110304 Jy ! Component: 2400 - total flux cleaned = 0.0011571 Jy ! Component: 2450 - total flux cleaned = 0.00121063 Jy ! Component: 2500 - total flux cleaned = 0.00119285 Jy ! Component: 2550 - total flux cleaned = 0.001193 Jy ! Component: 2600 - total flux cleaned = 0.00133197 Jy ! Component: 2650 - total flux cleaned = 0.00124581 Jy ! Component: 2700 - total flux cleaned = 0.00129707 Jy ! Component: 2750 - total flux cleaned = 0.00127995 Jy ! Component: 2800 - total flux cleaned = 0.0013134 Jy ! Component: 2850 - total flux cleaned = 0.00131346 Jy ! Component: 2900 - total flux cleaned = 0.00132995 Jy ! Component: 2950 - total flux cleaned = 0.00129731 Jy ! Component: 3000 - total flux cleaned = 0.00136251 Jy ! Component: 3050 - total flux cleaned = 0.00136255 Jy ! Component: 3100 - total flux cleaned = 0.00141065 Jy ! Component: 3150 - total flux cleaned = 0.00148978 Jy ! Component: 3200 - total flux cleaned = 0.00152131 Jy ! Component: 3250 - total flux cleaned = 0.00147441 Jy ! Component: 3300 - total flux cleaned = 0.00147453 Jy ! Component: 3350 - total flux cleaned = 0.00150545 Jy ! Component: 3400 - total flux cleaned = 0.00153595 Jy ! Component: 3450 - total flux cleaned = 0.00158124 Jy ! Component: 3500 - total flux cleaned = 0.00161128 Jy ! Component: 3550 - total flux cleaned = 0.0015814 Jy ! Component: 3600 - total flux cleaned = 0.00161104 Jy ! Component: 3650 - total flux cleaned = 0.00165537 Jy ! Component: 3700 - total flux cleaned = 0.00171361 Jy ! Component: 3750 - total flux cleaned = 0.00172807 Jy ! Component: 3800 - total flux cleaned = 0.00171359 Jy ! Component: 3850 - total flux cleaned = 0.00171363 Jy ! Component: 3900 - total flux cleaned = 0.00175595 Jy ! Component: 3950 - total flux cleaned = 0.0017841 Jy ! Component: 4000 - total flux cleaned = 0.00170043 Jy ! Component: 4050 - total flux cleaned = 0.00176993 Jy ! Total flux subtracted in 4096 components = 0.00176983 Jy ! Clean residual min=-0.000696 max=0.000737 Jy/beam ! Clean residual mean=0.000000 rms=0.000247 Jy/beam ! Combined flux in latest and established models = 0.296088 Jy keep ! Adding 272 model components to the UV plane model. ! The established model now contains 357 components and 0.296088 Jy ![Exited script file: muppet] wmap "J1228+3128_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.813 x 7.312 at 3.757 degrees (North through East) ! Clean map min=-0.0016347 max=0.26013 Jy/beam ! Writing clean map to FITS file: J1228+3128_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.26013 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000247393 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.285311 0.285311 0.570621 1.14124 2.28249 4.56497 9.12994 18.2599 36.5198 73.0395 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.26 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.813 x 7.312 at 3.757 degrees (North through East) ! Clean map min=-0.0016347 max=0.26013 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1228+3128_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:35:49 2019