! Started logfile: J1228+0232_S_2017_04_28_pus_uvs.log on Thu May 2 16:25:58 2019 obs J1228+0232_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J1228+0232_S_2017_04_28_pus_uva.fits ! AN table 1: 83 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.833467 visibilities/baseline/integration-bin. ! Found source: J1228+0232 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 12452 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1228+0232_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 406 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.912532Jy sigma=0.053743 ! Fit after self-cal, rms=0.892874Jy sigma=0.053713 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.344 mas, bmaj=7.973 mas, bpa=-12.52 degrees ! Estimated noise=373.184 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0339832 Jy ! Component: 100 - total flux cleaned = 0.0532854 Jy ! Total flux subtracted in 100 components = 0.0532854 Jy ! Clean residual min=-0.010271 max=0.014099 Jy/beam ! Clean residual mean=-0.000016 rms=0.003124 Jy/beam ! Combined flux in latest and established models = 0.0532854 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0532854 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172681Jy sigma=0.001821 ! Fit after self-cal, rms=0.171813Jy sigma=0.001764 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.681 mas, bmaj=8.62 mas, bpa=-12.38 degrees ! Estimated noise=341.876 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0168899 Jy ! Component: 100 - total flux cleaned = 0.0269464 Jy ! Component: 150 - total flux cleaned = 0.0311498 Jy ! Component: 200 - total flux cleaned = 0.0311538 Jy ! Total flux subtracted in 200 components = 0.0311538 Jy ! Clean residual min=-0.014528 max=0.015971 Jy/beam ! Clean residual mean=-0.000072 rms=0.003987 Jy/beam ! Combined flux in latest and established models = 0.0844392 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 20 components and 0.0844391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164251Jy sigma=0.002332 ! Fit after self-cal, rms=0.163480Jy sigma=0.002331 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 0.83 HN 0.61 KP 0.78 ! LA 0.78 MK 11.19 NL 0.69 OV 0.82 ! PT 0.87 SC 0.83 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 0.75 HN 0.66 KP 0.74 ! LA 0.76 MK 7.35 NL 0.81 OV 0.84 ! PT 0.87 SC 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.80 FD 0.77 HN 0.68 KP 0.76 ! LA 0.77 MK 0.20 NL 0.74 OV 0.75 ! PT 0.80 SC 0.87 ! ! ! Correcting IF 4. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.77 HN 0.53 KP 1.00* ! LA 31.07 MK 0.44 NL 1.00* OV 1.00* ! PT 0.83 SC 1.00* ! ! ! Fit before self-cal, rms=0.163480Jy sigma=0.002331 ! Fit after self-cal, rms=0.635219Jy sigma=0.000761 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.188 mas, bmaj=7.931 mas, bpa=-5.871 degrees ! Estimated noise=471.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00111267 Jy ! Component: 100 - total flux cleaned = -0.00224534 Jy ! Component: 150 - total flux cleaned = -0.0032311 Jy ! Component: 200 - total flux cleaned = -0.00382785 Jy ! Total flux subtracted in 200 components = -0.00382785 Jy ! Clean residual min=-0.003265 max=0.003541 Jy/beam ! Clean residual mean=0.000007 rms=0.000843 Jy/beam ! Combined flux in latest and established models = 0.0806113 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 28 components and 0.0806113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.634094Jy sigma=0.000759 ! Fit after self-cal, rms=0.634309Jy sigma=0.000732 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.634309Jy sigma=0.000732 ! Fit after self-cal, rms=0.643164Jy sigma=0.000709 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.478 mas, bmaj=8.039 mas, bpa=-2.417 degrees ! Estimated noise=505.265 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000392643 Jy ! Component: 100 - total flux cleaned = -0.00135941 Jy ! Component: 150 - total flux cleaned = -0.00211437 Jy ! Component: 200 - total flux cleaned = -0.00259047 Jy ! Total flux subtracted in 200 components = -0.00259047 Jy ! Clean residual min=-0.002750 max=0.003168 Jy/beam ! Clean residual mean=0.000008 rms=0.000777 Jy/beam ! Combined flux in latest and established models = 0.0780208 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 35 components and 0.0780208 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.641193Jy sigma=0.000710 ! Fit after self-cal, rms=0.641193Jy sigma=0.000709 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0003082 Jy ! Component: 100 - total flux cleaned = -0.00039548 Jy ! Component: 150 - total flux cleaned = -0.000185124 Jy ! Component: 200 - total flux cleaned = -5.87314e-05 Jy ! Total flux subtracted in 200 components = -5.87314e-05 Jy ! Clean residual min=-0.002816 max=0.003122 Jy/beam ! Clean residual mean=0.000008 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.0779621 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 39 components and 0.0779621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.640463Jy sigma=0.000714 ! Fit after self-cal, rms=0.640469Jy sigma=0.000714 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.640469Jy sigma=0.000714 ! Fit after self-cal, rms=0.054283Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.392 mas, bmaj=7.993 mas, bpa=-3.009 degrees ! Estimated noise=499.455 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000146149 Jy ! Component: 100 - total flux cleaned = 6.01267e-05 Jy ! Component: 150 - total flux cleaned = -4.36845e-05 Jy ! Component: 200 - total flux cleaned = -0.000115879 Jy ! Total flux subtracted in 200 components = -0.000115879 Jy ! Clean residual min=-0.001855 max=0.001727 Jy/beam ! Clean residual mean=0.000003 rms=0.000366 Jy/beam ! Combined flux in latest and established models = 0.0778462 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 48 components and 0.0778462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054255Jy sigma=0.000668 ! Fit after self-cal, rms=0.054157Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.15525e-05 Jy ! Component: 100 - total flux cleaned = -0.00012509 Jy ! Component: 150 - total flux cleaned = -0.000163239 Jy ! Component: 200 - total flux cleaned = -0.000217926 Jy ! Total flux subtracted in 200 components = -0.000217926 Jy ! Clean residual min=-0.001808 max=0.001748 Jy/beam ! Clean residual mean=0.000003 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.0776283 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 54 components and 0.0776283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054143Jy sigma=0.000666 ! Fit after self-cal, rms=0.054140Jy sigma=0.000666 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054140Jy sigma=0.000666 ! Fit after self-cal, rms=0.053854Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.357 mas, bmaj=11.76 mas, bpa=-0.572 degrees ! Estimated noise=611.229 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000378158 Jy ! Component: 100 - total flux cleaned = -0.000506086 Jy ! Component: 150 - total flux cleaned = -0.000617117 Jy ! Component: 200 - total flux cleaned = -0.000716589 Jy ! Total flux subtracted in 200 components = -0.000716589 Jy ! Clean residual min=-0.001502 max=0.001618 Jy/beam ! Clean residual mean=0.000006 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.0769117 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 58 components and 0.0769117 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053856Jy sigma=0.000666 ! Fit after self-cal, rms=0.053845Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.19868e-06 Jy ! Component: 100 - total flux cleaned = -7.56878e-05 Jy ! Component: 150 - total flux cleaned = -0.00013957 Jy ! Component: 200 - total flux cleaned = -0.000184419 Jy ! Total flux subtracted in 200 components = -0.000184419 Jy ! Clean residual min=-0.001473 max=0.001603 Jy/beam ! Clean residual mean=0.000006 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.0767273 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 64 components and 0.0767273 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053848Jy sigma=0.000666 ! Fit after self-cal, rms=0.053845Jy sigma=0.000666 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.397 mas, bmaj=7.979 mas, bpa=-2.739 degrees ! Estimated noise=499.898 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.397 x 7.979 at -2.739 degrees (North through East) ! Clean map min=-0.0016188 max=0.071025 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.844 mas, bmaj=7.347 mas, bpa=-4.69 degrees ! Estimated noise=628.491 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0552541 Jy ! Component: 100 - total flux cleaned = 0.0691062 Jy ! Component: 150 - total flux cleaned = 0.0745642 Jy ! Component: 200 - total flux cleaned = 0.0757836 Jy ! Total flux subtracted in 200 components = 0.0757836 Jy ! Clean residual min=-0.002084 max=0.002115 Jy/beam ! Clean residual mean=0.000001 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.0757836 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0757836 Jy ! Inverting map and beam ! Estimated beam: bmin=3.397 mas, bmaj=7.979 mas, bpa=-2.739 degrees ! Estimated noise=499.898 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112196 Jy ! Component: 100 - total flux cleaned = 0.00119266 Jy ! Component: 150 - total flux cleaned = 0.0011946 Jy ! Component: 200 - total flux cleaned = 0.00123352 Jy ! Total flux subtracted in 200 components = 0.00123352 Jy ! Clean residual min=-0.001839 max=0.001572 Jy/beam ! Clean residual mean=0.000003 rms=0.000347 Jy/beam ! Combined flux in latest and established models = 0.0770172 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 34 components and 0.0770172 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.357 mas, bmaj=11.76 mas, bpa=-0.572 degrees ! Estimated noise=611.229 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000188056 Jy ! Component: 100 - total flux cleaned = 0.000216512 Jy ! Component: 150 - total flux cleaned = 0.000262355 Jy ! Component: 200 - total flux cleaned = 0.000318824 Jy ! Total flux subtracted in 200 components = 0.000318824 Jy ! Clean residual min=-0.001515 max=0.001462 Jy/beam ! Clean residual mean=0.000005 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.077336 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.13495e-05 Jy ! Component: 100 - total flux cleaned = 4.48513e-05 Jy ! Component: 150 - total flux cleaned = 6.90473e-05 Jy ! Component: 200 - total flux cleaned = 7.96878e-05 Jy ! Total flux subtracted in 200 components = 7.96878e-05 Jy ! Clean residual min=-0.001461 max=0.001429 Jy/beam ! Clean residual mean=0.000005 rms=0.000403 Jy/beam ! Combined flux in latest and established models = 0.0774157 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 71 components and 0.0774157 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.397 mas, bmaj=7.979 mas, bpa=-2.739 degrees ! Estimated noise=499.898 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.44054e-06 Jy ! Component: 100 - total flux cleaned = -2.53173e-05 Jy ! Component: 150 - total flux cleaned = -2.62106e-05 Jy ! Component: 200 - total flux cleaned = -6.65034e-05 Jy ! Total flux subtracted in 200 components = -6.65034e-05 Jy ! Clean residual min=-0.001713 max=0.001447 Jy/beam ! Clean residual mean=0.000003 rms=0.000330 Jy/beam ! Combined flux in latest and established models = 0.0773492 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 83 components and 0.0773492 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053803Jy sigma=0.000665 ! Fit after self-cal, rms=0.053801Jy sigma=0.000665 wmodel J1228+0232_S_2017_04_28_pus_map.mod ! Writing 83 model components to file: J1228+0232_S_2017_04_28_pus_map.mod wobs J1228+0232_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J1228+0232_S_2017_04_28_pus_uvs.fits wwins J1228+0232_S_2017_04_28_pus_map.win ! wwins: Wrote 2 windows to J1228+0232_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000254771 Jy ! Component: 100 - total flux cleaned = -0.000231577 Jy ! Component: 150 - total flux cleaned = -0.000275311 Jy ! Component: 200 - total flux cleaned = -0.000275786 Jy ! Component: 250 - total flux cleaned = -0.00029575 Jy ! Component: 300 - total flux cleaned = -0.000257227 Jy ! Component: 350 - total flux cleaned = -0.000238511 Jy ! Component: 400 - total flux cleaned = -0.000183874 Jy ! Component: 450 - total flux cleaned = -0.000113205 Jy ! Component: 500 - total flux cleaned = -7.8855e-05 Jy ! Component: 550 - total flux cleaned = 5.42868e-06 Jy ! Component: 600 - total flux cleaned = 8.77644e-05 Jy ! Component: 650 - total flux cleaned = 0.000168935 Jy ! Component: 700 - total flux cleaned = 0.000232573 Jy ! Component: 750 - total flux cleaned = 0.000310539 Jy ! Component: 800 - total flux cleaned = 0.000386914 Jy ! Component: 850 - total flux cleaned = 0.000432281 Jy ! Component: 900 - total flux cleaned = 0.00053631 Jy ! Component: 950 - total flux cleaned = 0.000653615 Jy ! Component: 1000 - total flux cleaned = 0.000768955 Jy ! Component: 1050 - total flux cleaned = 0.00085438 Jy ! Component: 1100 - total flux cleaned = 0.00100801 Jy ! Component: 1150 - total flux cleaned = 0.0010634 Jy ! Component: 1200 - total flux cleaned = 0.00113145 Jy ! Component: 1250 - total flux cleaned = 0.00123884 Jy ! Component: 1300 - total flux cleaned = 0.00131805 Jy ! Component: 1350 - total flux cleaned = 0.00135711 Jy ! Component: 1400 - total flux cleaned = 0.0014478 Jy ! Component: 1450 - total flux cleaned = 0.00151179 Jy ! Component: 1500 - total flux cleaned = 0.00166296 Jy ! Component: 1550 - total flux cleaned = 0.00168793 Jy ! Component: 1600 - total flux cleaned = 0.00177417 Jy ! Component: 1650 - total flux cleaned = 0.00182266 Jy ! Component: 1700 - total flux cleaned = 0.00190667 Jy ! Component: 1750 - total flux cleaned = 0.00190673 Jy ! Component: 1800 - total flux cleaned = 0.00198925 Jy ! Component: 1850 - total flux cleaned = 0.0020126 Jy ! Component: 1900 - total flux cleaned = 0.00209336 Jy ! Component: 1950 - total flux cleaned = 0.00215043 Jy ! Component: 2000 - total flux cleaned = 0.00220689 Jy ! Component: 2050 - total flux cleaned = 0.00222928 Jy ! Component: 2100 - total flux cleaned = 0.00227353 Jy ! Component: 2150 - total flux cleaned = 0.00231724 Jy ! Component: 2200 - total flux cleaned = 0.00230616 Jy ! Component: 2250 - total flux cleaned = 0.00234928 Jy ! Component: 2300 - total flux cleaned = 0.00233845 Jy ! Component: 2350 - total flux cleaned = 0.00232783 Jy ! Component: 2400 - total flux cleaned = 0.0023489 Jy ! Component: 2450 - total flux cleaned = 0.0023177 Jy ! Component: 2500 - total flux cleaned = 0.00233843 Jy ! Component: 2550 - total flux cleaned = 0.00233839 Jy ! Component: 2600 - total flux cleaned = 0.00228768 Jy ! Component: 2650 - total flux cleaned = 0.00228771 Jy ! Component: 2700 - total flux cleaned = 0.00231781 Jy ! Component: 2750 - total flux cleaned = 0.00230787 Jy ! Component: 2800 - total flux cleaned = 0.00229796 Jy ! Component: 2850 - total flux cleaned = 0.00231743 Jy ! Component: 2900 - total flux cleaned = 0.00225926 Jy ! Component: 2950 - total flux cleaned = 0.00225918 Jy ! Component: 3000 - total flux cleaned = 0.00221155 Jy ! Component: 3050 - total flux cleaned = 0.00223996 Jy ! Component: 3100 - total flux cleaned = 0.00221173 Jy ! Component: 3150 - total flux cleaned = 0.00220252 Jy ! Component: 3200 - total flux cleaned = 0.00220253 Jy ! Component: 3250 - total flux cleaned = 0.00221171 Jy ! Component: 3300 - total flux cleaned = 0.00220252 Jy ! Component: 3350 - total flux cleaned = 0.00222977 Jy ! Component: 3400 - total flux cleaned = 0.00222076 Jy ! Component: 3450 - total flux cleaned = 0.00219389 Jy ! Component: 3500 - total flux cleaned = 0.0022294 Jy ! Component: 3550 - total flux cleaned = 0.00221174 Jy ! Component: 3600 - total flux cleaned = 0.00223798 Jy ! Component: 3650 - total flux cleaned = 0.002238 Jy ! Component: 3700 - total flux cleaned = 0.00225527 Jy ! Component: 3750 - total flux cleaned = 0.00228959 Jy ! Component: 3800 - total flux cleaned = 0.00226396 Jy ! Component: 3850 - total flux cleaned = 0.00224703 Jy ! Component: 3900 - total flux cleaned = 0.00226387 Jy ! Component: 3950 - total flux cleaned = 0.00226381 Jy ! Component: 4000 - total flux cleaned = 0.00228871 Jy ! Component: 4050 - total flux cleaned = 0.00226384 Jy ! Total flux subtracted in 4096 components = 0.00228856 Jy ! Clean residual min=-0.000506 max=0.000512 Jy/beam ! Clean residual mean=0.000001 rms=0.000154 Jy/beam ! Combined flux in latest and established models = 0.0796377 Jy keep ! Adding 303 model components to the UV plane model. ! The established model now contains 386 components and 0.0796378 Jy ![Exited script file: muppet] wmap "J1228+0232_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.397 x 7.979 at -2.739 degrees (North through East) ! Clean map min=-0.0012724 max=0.071567 Jy/beam ! Writing clean map to FITS file: J1228+0232_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0715674 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000153059 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.641602 0.641602 1.2832 2.56641 5.13281 10.2656 20.5313 41.0625 82.125 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.071 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.397 x 7.979 at -2.739 degrees (North through East) ! Clean map min=-0.0012724 max=0.071567 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1228+0232_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:26:03 2019