! Started logfile: J1224+2436_S_2017_10_09_pus_uvs.log on Sun May 12 13:12:33 2019 obs J1224+2436_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1224+2436_S_2017_10_09_pus_uva.fits ! AN table 1: 145 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.550575 visibilities/baseline/integration-bin. ! Found source: J1224+2436 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 11496 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1224+2436_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 395 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 582 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 452 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 981 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.998432Jy sigma=0.008314 ! Fit after self-cal, rms=0.950679Jy sigma=0.007942 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.622 mas, bmaj=9.244 mas, bpa=-24.17 degrees ! Estimated noise=2168.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0427849 Jy ! Component: 100 - total flux cleaned = 0.0510434 Jy ! Total flux subtracted in 100 components = 0.0510434 Jy ! Clean residual min=-0.005497 max=0.005771 Jy/beam ! Clean residual mean=0.000004 rms=0.001570 Jy/beam ! Combined flux in latest and established models = 0.0510434 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0510434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086562Jy sigma=0.000598 ! Fit after self-cal, rms=0.085358Jy sigma=0.000588 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.604 mas, bmaj=11.35 mas, bpa=-20 degrees ! Estimated noise=1079.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129003 Jy ! Component: 100 - total flux cleaned = 0.0014729 Jy ! Component: 150 - total flux cleaned = 0.00162566 Jy ! Component: 200 - total flux cleaned = 0.00166917 Jy ! Total flux subtracted in 200 components = 0.00166917 Jy ! Clean residual min=-0.003100 max=0.002404 Jy/beam ! Clean residual mean=0.000002 rms=0.000762 Jy/beam ! Combined flux in latest and established models = 0.0527126 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 25 components and 0.0527126 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085236Jy sigma=0.000587 ! Fit after self-cal, rms=0.085209Jy sigma=0.000587 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.05 HN 1.04 KP 1.05 ! LA 1.11 MK 0.82 NL 0.96 OV 1.00* ! PT 1.12 ! ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 1.10 KP 1.02 ! LA 0.90 MK 0.91 NL 1.00* OV 1.00* ! PT 1.06 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.80 FD 1.11 HN 1.10 KP 0.88 ! LA 0.79 MK 0.91 NL 0.86 OV 1.00* ! PT 1.02 ! ! ! Correcting IF 4. ! A total of 324 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.085209Jy sigma=0.000587 ! Fit after self-cal, rms=0.080612Jy sigma=0.000590 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.518 mas, bmaj=11.34 mas, bpa=-20.81 degrees ! Estimated noise=1125.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000382477 Jy ! Component: 100 - total flux cleaned = 0.000316016 Jy ! Component: 150 - total flux cleaned = 0.000287658 Jy ! Component: 200 - total flux cleaned = 0.000262582 Jy ! Total flux subtracted in 200 components = 0.000262582 Jy ! Clean residual min=-0.002527 max=0.002013 Jy/beam ! Clean residual mean=0.000005 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.0529752 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 37 components and 0.0529752 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080584Jy sigma=0.000590 ! Fit after self-cal, rms=0.080366Jy sigma=0.000589 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080366Jy sigma=0.000589 ! Fit after self-cal, rms=0.077081Jy sigma=0.000588 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.487 mas, bmaj=11.23 mas, bpa=-21.2 degrees ! Estimated noise=1117.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000413414 Jy ! Component: 100 - total flux cleaned = 0.000438076 Jy ! Component: 150 - total flux cleaned = 0.000458503 Jy ! Component: 200 - total flux cleaned = 0.000439749 Jy ! Total flux subtracted in 200 components = 0.000439749 Jy ! Clean residual min=-0.002486 max=0.001986 Jy/beam ! Clean residual mean=0.000005 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.0534149 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 44 components and 0.0534149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077067Jy sigma=0.000588 ! Fit after self-cal, rms=0.077026Jy sigma=0.000588 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.21467e-05 Jy ! Component: 100 - total flux cleaned = -9.46554e-05 Jy ! Component: 150 - total flux cleaned = -0.000113594 Jy ! Component: 200 - total flux cleaned = -0.000131208 Jy ! Total flux subtracted in 200 components = -0.000131208 Jy ! Clean residual min=-0.002457 max=0.001958 Jy/beam ! Clean residual mean=0.000005 rms=0.000563 Jy/beam ! Combined flux in latest and established models = 0.0532837 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 46 components and 0.0532837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077015Jy sigma=0.000588 ! Fit after self-cal, rms=0.077012Jy sigma=0.000588 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077012Jy sigma=0.000588 ! Fit after self-cal, rms=0.077058Jy sigma=0.000588 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.476 mas, bmaj=11.13 mas, bpa=-21.27 degrees ! Estimated noise=1119.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000592754 Jy ! Component: 100 - total flux cleaned = 0.00063322 Jy ! Component: 150 - total flux cleaned = 0.000667125 Jy ! Component: 200 - total flux cleaned = 0.000666947 Jy ! Total flux subtracted in 200 components = 0.000666947 Jy ! Clean residual min=-0.002431 max=0.001925 Jy/beam ! Clean residual mean=0.000005 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.0539506 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 50 components and 0.0539506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077047Jy sigma=0.000588 ! Fit after self-cal, rms=0.077058Jy sigma=0.000587 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.84471e-05 Jy ! Component: 100 - total flux cleaned = 3.03315e-05 Jy ! Component: 150 - total flux cleaned = 1.40257e-05 Jy ! Component: 200 - total flux cleaned = -9.73119e-07 Jy ! Total flux subtracted in 200 components = -9.73119e-07 Jy ! Clean residual min=-0.002402 max=0.001920 Jy/beam ! Clean residual mean=0.000004 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.0539497 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 50 components and 0.0539497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077051Jy sigma=0.000587 ! Fit after self-cal, rms=0.077009Jy sigma=0.000587 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077009Jy sigma=0.000587 ! Fit after self-cal, rms=0.077048Jy sigma=0.000587 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.133 mas, bmaj=13.12 mas, bpa=-22.17 degrees ! Estimated noise=1258.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000614257 Jy ! Component: 100 - total flux cleaned = 0.000628755 Jy ! Component: 150 - total flux cleaned = 0.000640988 Jy ! Component: 200 - total flux cleaned = 0.000641525 Jy ! Total flux subtracted in 200 components = 0.000641525 Jy ! Clean residual min=-0.002214 max=0.001709 Jy/beam ! Clean residual mean=0.000008 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 0.0545912 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 54 components and 0.0545912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077044Jy sigma=0.000587 ! Fit after self-cal, rms=0.077052Jy sigma=0.000587 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.91912e-05 Jy ! Component: 100 - total flux cleaned = -6.51493e-05 Jy ! Component: 150 - total flux cleaned = -5.37309e-05 Jy ! Component: 200 - total flux cleaned = -4.41087e-05 Jy ! Total flux subtracted in 200 components = -4.41087e-05 Jy ! Clean residual min=-0.002168 max=0.001717 Jy/beam ! Clean residual mean=0.000007 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 0.0545471 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 54 components and 0.0545471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077051Jy sigma=0.000587 ! Fit after self-cal, rms=0.077029Jy sigma=0.000587 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.468 mas, bmaj=11.06 mas, bpa=-21.33 degrees ! Estimated noise=1121.46 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.468 x 11.06 at -21.33 degrees (North through East) ! Clean map min=-0.0029588 max=0.052652 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.506 mas, bmaj=9.13 mas, bpa=-24.19 degrees ! Estimated noise=1849.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0413083 Jy ! Component: 100 - total flux cleaned = 0.0505294 Jy ! Component: 150 - total flux cleaned = 0.0528161 Jy ! Component: 200 - total flux cleaned = 0.0535205 Jy ! Total flux subtracted in 200 components = 0.0535205 Jy ! Clean residual min=-0.003941 max=0.003770 Jy/beam ! Clean residual mean=0.000002 rms=0.001072 Jy/beam ! Combined flux in latest and established models = 0.0535205 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0535205 Jy ! Inverting map and beam ! Estimated beam: bmin=4.468 mas, bmaj=11.06 mas, bpa=-21.33 degrees ! Estimated noise=1121.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109337 Jy ! Component: 100 - total flux cleaned = 0.0010895 Jy ! Component: 150 - total flux cleaned = 0.00108885 Jy ! Component: 200 - total flux cleaned = 0.00108846 Jy ! Total flux subtracted in 200 components = 0.00108846 Jy ! Clean residual min=-0.002457 max=0.002137 Jy/beam ! Clean residual mean=0.000004 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.054609 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 27 components and 0.054609 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.133 mas, bmaj=13.12 mas, bpa=-22.17 degrees ! Estimated noise=1258.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000167767 Jy ! Component: 100 - total flux cleaned = -0.000189522 Jy ! Component: 150 - total flux cleaned = -0.00017171 Jy ! Component: 200 - total flux cleaned = -0.000154337 Jy ! Total flux subtracted in 200 components = -0.000154337 Jy ! Clean residual min=-0.002314 max=0.001909 Jy/beam ! Clean residual mean=0.000007 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 0.0544546 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.59737e-07 Jy ! Component: 100 - total flux cleaned = 1.59545e-05 Jy ! Component: 150 - total flux cleaned = 3.00073e-05 Jy ! Component: 200 - total flux cleaned = 2.97511e-05 Jy ! Total flux subtracted in 200 components = 2.97511e-05 Jy ! Clean residual min=-0.002280 max=0.001904 Jy/beam ! Clean residual mean=0.000007 rms=0.000606 Jy/beam ! Combined flux in latest and established models = 0.0544844 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 37 components and 0.0544844 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.468 mas, bmaj=11.06 mas, bpa=-21.33 degrees ! Estimated noise=1121.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000109312 Jy ! Component: 100 - total flux cleaned = 0.000140097 Jy ! Component: 150 - total flux cleaned = 0.000139784 Jy ! Component: 200 - total flux cleaned = 9.54391e-05 Jy ! Total flux subtracted in 200 components = 9.54391e-05 Jy ! Clean residual min=-0.002394 max=0.002001 Jy/beam ! Clean residual mean=0.000004 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.0545798 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 41 components and 0.0545798 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077040Jy sigma=0.000587 ! Fit after self-cal, rms=0.077043Jy sigma=0.000587 wmodel J1224+2436_S_2017_10_09_pus_map.mod ! Writing 41 model components to file: J1224+2436_S_2017_10_09_pus_map.mod wobs J1224+2436_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1224+2436_S_2017_10_09_pus_uvs.fits wwins J1224+2436_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J1224+2436_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000984111 Jy ! Component: 100 - total flux cleaned = -0.00156448 Jy ! Component: 150 - total flux cleaned = -0.00205566 Jy ! Component: 200 - total flux cleaned = -0.00235997 Jy ! Component: 250 - total flux cleaned = -0.00235966 Jy ! Component: 300 - total flux cleaned = -0.00238702 Jy ! Component: 350 - total flux cleaned = -0.00233361 Jy ! Component: 400 - total flux cleaned = -0.00220647 Jy ! Component: 450 - total flux cleaned = -0.00215769 Jy ! Component: 500 - total flux cleaned = -0.00211132 Jy ! Component: 550 - total flux cleaned = -0.0021341 Jy ! Component: 600 - total flux cleaned = -0.00213462 Jy ! Component: 650 - total flux cleaned = -0.00219918 Jy ! Component: 700 - total flux cleaned = -0.00213609 Jy ! Component: 750 - total flux cleaned = -0.00207483 Jy ! Component: 800 - total flux cleaned = -0.00201499 Jy ! Component: 850 - total flux cleaned = -0.0020148 Jy ! Component: 900 - total flux cleaned = -0.00191912 Jy ! Component: 950 - total flux cleaned = -0.00191908 Jy ! Component: 1000 - total flux cleaned = -0.00190052 Jy ! Component: 1050 - total flux cleaned = -0.00191823 Jy ! Component: 1100 - total flux cleaned = -0.00190109 Jy ! Component: 1150 - total flux cleaned = -0.00193539 Jy ! Component: 1200 - total flux cleaned = -0.00195213 Jy ! Component: 1250 - total flux cleaned = -0.00196834 Jy ! Component: 1300 - total flux cleaned = -0.00198437 Jy ! Component: 1350 - total flux cleaned = -0.00198453 Jy ! Component: 1400 - total flux cleaned = -0.0019692 Jy ! Component: 1450 - total flux cleaned = -0.00198476 Jy ! Component: 1500 - total flux cleaned = -0.0019547 Jy ! Component: 1550 - total flux cleaned = -0.00196944 Jy ! Component: 1600 - total flux cleaned = -0.00196921 Jy ! Component: 1650 - total flux cleaned = -0.00191165 Jy ! Component: 1700 - total flux cleaned = -0.00186904 Jy ! Component: 1750 - total flux cleaned = -0.00184111 Jy ! Component: 1800 - total flux cleaned = -0.00177222 Jy ! Component: 1850 - total flux cleaned = -0.00169092 Jy ! Component: 1900 - total flux cleaned = -0.00159743 Jy ! Component: 1950 - total flux cleaned = -0.00151811 Jy ! Component: 2000 - total flux cleaned = -0.00141371 Jy ! Component: 2050 - total flux cleaned = -0.00128472 Jy ! Component: 2100 - total flux cleaned = -0.00120831 Jy ! Component: 2150 - total flux cleaned = -0.00110739 Jy ! Component: 2200 - total flux cleaned = -0.000995364 Jy ! Component: 2250 - total flux cleaned = -0.000896703 Jy ! Component: 2300 - total flux cleaned = -0.00081131 Jy ! Component: 2350 - total flux cleaned = -0.000690573 Jy ! Component: 2400 - total flux cleaned = -0.00059509 Jy ! Component: 2450 - total flux cleaned = -0.000535854 Jy ! Component: 2500 - total flux cleaned = -0.000418865 Jy ! Component: 2550 - total flux cleaned = -0.000337844 Jy ! Component: 2600 - total flux cleaned = -0.00026888 Jy ! Component: 2650 - total flux cleaned = -0.000178036 Jy ! Component: 2700 - total flux cleaned = -0.000144167 Jy ! Component: 2750 - total flux cleaned = -4.36598e-05 Jy ! Component: 2800 - total flux cleaned = 6.47839e-07 Jy ! Component: 2850 - total flux cleaned = 7.7538e-05 Jy ! Component: 2900 - total flux cleaned = 0.000131997 Jy ! Component: 2950 - total flux cleaned = 0.000175166 Jy ! Component: 3000 - total flux cleaned = 0.00021801 Jy ! Component: 3050 - total flux cleaned = 0.000281821 Jy ! Component: 3100 - total flux cleaned = 0.00029239 Jy ! Component: 3150 - total flux cleaned = 0.000344884 Jy ! Component: 3200 - total flux cleaned = 0.000396895 Jy ! Component: 3250 - total flux cleaned = 0.000427885 Jy ! Component: 3300 - total flux cleaned = 0.000479326 Jy ! Component: 3350 - total flux cleaned = 0.000510025 Jy ! Component: 3400 - total flux cleaned = 0.000550639 Jy ! Component: 3450 - total flux cleaned = 0.000570879 Jy ! Component: 3500 - total flux cleaned = 0.0006011 Jy ! Component: 3550 - total flux cleaned = 0.00064105 Jy ! Component: 3600 - total flux cleaned = 0.000660959 Jy ! Component: 3650 - total flux cleaned = 0.000710353 Jy ! Component: 3700 - total flux cleaned = 0.00070052 Jy ! Component: 3750 - total flux cleaned = 0.000729971 Jy ! Component: 3800 - total flux cleaned = 0.000739737 Jy ! Component: 3850 - total flux cleaned = 0.000749435 Jy ! Component: 3900 - total flux cleaned = 0.000749433 Jy ! Component: 3950 - total flux cleaned = 0.000749395 Jy ! Component: 4000 - total flux cleaned = 0.000768627 Jy ! Component: 4050 - total flux cleaned = 0.000778165 Jy ! Total flux subtracted in 4096 components = 0.000759101 Jy ! Clean residual min=-0.000561 max=0.000539 Jy/beam ! Clean residual mean=0.000003 rms=0.000171 Jy/beam ! Combined flux in latest and established models = 0.0553389 Jy keep ! Adding 238 model components to the UV plane model. ! The established model now contains 279 components and 0.0553389 Jy ![Exited script file: muppet] wmap "J1224+2436_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.468 x 11.06 at -21.33 degrees (North through East) ! Clean map min=-0.002683 max=0.052058 Jy/beam ! Writing clean map to FITS file: J1224+2436_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0520581 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000170693 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.98367 0.98367 1.96734 3.93468 7.86936 15.7387 31.4774 62.9549 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.052 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.468 x 11.06 at -21.33 degrees (North through East) ! Clean map min=-0.002683 max=0.052058 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1224+2436_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:12:38 2019