! Started logfile: J1224+2436_S_2017_05_27_pus_uvs.log on Fri May 3 11:06:10 2019 obs J1224+2436_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1224+2436_S_2017_05_27_pus_uva.fits ! AN table 1: 231 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.969024 visibilities/baseline/integration-bin. ! Found source: J1224+2436 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 40292 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1224+2436_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 164 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1206 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.002376Jy sigma=0.014473 ! Fit after self-cal, rms=0.967022Jy sigma=0.014264 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.962 mas, bmaj=5.888 mas, bpa=-3.329 degrees ! Estimated noise=667.844 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0239011 Jy ! Component: 100 - total flux cleaned = 0.0293104 Jy ! Total flux subtracted in 100 components = 0.0293104 Jy ! Clean residual min=-0.004120 max=0.004587 Jy/beam ! Clean residual mean=-0.000006 rms=0.001097 Jy/beam ! Combined flux in latest and established models = 0.0293104 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0293104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085935Jy sigma=0.000717 ! Fit after self-cal, rms=0.084769Jy sigma=0.000692 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.529 mas, bmaj=6.893 mas, bpa=-4.498 degrees ! Estimated noise=391.251 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00438814 Jy ! Component: 100 - total flux cleaned = 0.00588062 Jy ! Component: 150 - total flux cleaned = 0.00604596 Jy ! Component: 200 - total flux cleaned = 0.00610937 Jy ! Total flux subtracted in 200 components = 0.00610937 Jy ! Clean residual min=-0.003309 max=0.002653 Jy/beam ! Clean residual mean=-0.000005 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.0354198 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 17 components and 0.0354198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084261Jy sigma=0.000707 ! Fit after self-cal, rms=0.084237Jy sigma=0.000706 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 4.04 FD 0.92 HN 0.98 KP 0.96 ! LA 0.88 MK 0.96 NL 0.92 OV 1.07 ! PT 1.04 SC 0.82 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.91 HN 1.00 KP 0.97 ! LA 0.88 MK 0.90 NL 1.06 OV 1.04 ! PT 1.03 SC 0.83 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 5.33 FD 0.98 HN 1.03 KP 1.00 ! LA 0.97 MK 0.97 NL 1.07 OV 1.01 ! PT 1.10 SC 0.87 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.87 HN 0.83 KP 1.00* ! LA 0.80 MK 0.58 NL 1.00* OV 1.00* ! PT 0.91 SC 1.00* ! ! ! Fit before self-cal, rms=0.084237Jy sigma=0.000706 ! Fit after self-cal, rms=0.235769Jy sigma=0.000639 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.32 mas, bmaj=7.101 mas, bpa=-5.855 degrees ! Estimated noise=423.745 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00193066 Jy ! Component: 100 - total flux cleaned = 0.00192988 Jy ! Component: 150 - total flux cleaned = 0.00192958 Jy ! Component: 200 - total flux cleaned = 0.00187558 Jy ! Total flux subtracted in 200 components = 0.00187558 Jy ! Clean residual min=-0.002325 max=0.002456 Jy/beam ! Clean residual mean=-0.000001 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.0372954 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 32 components and 0.0372954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.235408Jy sigma=0.000639 ! Fit after self-cal, rms=0.235932Jy sigma=0.000634 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.235932Jy sigma=0.000634 ! Fit after self-cal, rms=0.274112Jy sigma=0.000630 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.317 mas, bmaj=6.946 mas, bpa=-6.292 degrees ! Estimated noise=424.472 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000908891 Jy ! Component: 100 - total flux cleaned = 0.000909803 Jy ! Component: 150 - total flux cleaned = 0.000882943 Jy ! Component: 200 - total flux cleaned = 0.00086003 Jy ! Total flux subtracted in 200 components = 0.00086003 Jy ! Clean residual min=-0.001368 max=0.001559 Jy/beam ! Clean residual mean=0.000003 rms=0.000321 Jy/beam ! Combined flux in latest and established models = 0.0381554 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 38 components and 0.0381554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.274007Jy sigma=0.000630 ! Fit after self-cal, rms=0.274041Jy sigma=0.000629 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-74.5, -61.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000679588 Jy ! Component: 100 - total flux cleaned = 0.000556166 Jy ! Component: 150 - total flux cleaned = 0.000414405 Jy ! Component: 200 - total flux cleaned = 0.000361443 Jy ! Total flux subtracted in 200 components = 0.000361443 Jy ! Clean residual min=-0.001437 max=0.001246 Jy/beam ! Clean residual mean=0.000002 rms=0.000306 Jy/beam ! Combined flux in latest and established models = 0.0385168 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 54 components and 0.0385168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.273989Jy sigma=0.000629 ! Fit after self-cal, rms=0.274001Jy sigma=0.000629 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.274001Jy sigma=0.000629 ! Fit after self-cal, rms=0.278518Jy sigma=0.000629 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.315 mas, bmaj=6.958 mas, bpa=-6.755 degrees ! Estimated noise=431.623 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010169 Jy ! Component: 100 - total flux cleaned = 0.00119094 Jy ! Component: 150 - total flux cleaned = 0.00110887 Jy ! Component: 200 - total flux cleaned = 0.00106008 Jy ! Total flux subtracted in 200 components = 0.00106008 Jy ! Clean residual min=-0.001326 max=0.001270 Jy/beam ! Clean residual mean=0.000002 rms=0.000298 Jy/beam ! Combined flux in latest and established models = 0.0395769 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 64 components and 0.0395769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.278446Jy sigma=0.000628 ! Fit after self-cal, rms=0.278417Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000257079 Jy ! Component: 100 - total flux cleaned = 0.000100354 Jy ! Component: 150 - total flux cleaned = 5.25559e-05 Jy ! Component: 200 - total flux cleaned = 2.99203e-05 Jy ! Total flux subtracted in 200 components = 2.99203e-05 Jy ! Clean residual min=-0.001352 max=0.001233 Jy/beam ! Clean residual mean=0.000002 rms=0.000298 Jy/beam ! Combined flux in latest and established models = 0.0396068 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 68 components and 0.0396069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.278375Jy sigma=0.000628 ! Fit after self-cal, rms=0.278372Jy sigma=0.000628 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.278372Jy sigma=0.000628 ! Fit after self-cal, rms=0.296803Jy sigma=0.000628 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.446 mas, bmaj=10.79 mas, bpa=-10.82 degrees ! Estimated noise=553.092 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00076259 Jy ! Component: 100 - total flux cleaned = 0.000941602 Jy ! Component: 150 - total flux cleaned = 0.000989926 Jy ! Component: 200 - total flux cleaned = 0.000967029 Jy ! Total flux subtracted in 200 components = 0.000967029 Jy ! Clean residual min=-0.001353 max=0.001227 Jy/beam ! Clean residual mean=0.000005 rms=0.000377 Jy/beam ! Combined flux in latest and established models = 0.0405739 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 79 components and 0.0405739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.296729Jy sigma=0.000628 ! Fit after self-cal, rms=0.296729Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000150883 Jy ! Component: 100 - total flux cleaned = 0.00012876 Jy ! Component: 150 - total flux cleaned = 8.6818e-05 Jy ! Component: 200 - total flux cleaned = 2.85601e-05 Jy ! Total flux subtracted in 200 components = 2.85601e-05 Jy ! Clean residual min=-0.001321 max=0.001254 Jy/beam ! Clean residual mean=0.000005 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.0406024 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 86 components and 0.0406024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.296686Jy sigma=0.000628 ! Fit after self-cal, rms=0.296684Jy sigma=0.000628 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.313 mas, bmaj=6.987 mas, bpa=-7.126 degrees ! Estimated noise=439.585 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.313 x 6.987 at -7.126 degrees (North through East) ! Clean map min=-0.0021928 max=0.039892 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.723 mas, bmaj=6.019 mas, bpa=-6.976 degrees ! Estimated noise=762.458 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0309882 Jy ! Component: 100 - total flux cleaned = 0.0379902 Jy ! Component: 150 - total flux cleaned = 0.0404928 Jy ! Component: 200 - total flux cleaned = 0.0402142 Jy ! Total flux subtracted in 200 components = 0.0402142 Jy ! Clean residual min=-0.002261 max=0.002463 Jy/beam ! Clean residual mean=-0.000001 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.0402142 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0402142 Jy ! Inverting map and beam ! Estimated beam: bmin=3.313 mas, bmaj=6.987 mas, bpa=-7.126 degrees ! Estimated noise=439.585 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000710355 Jy ! Component: 100 - total flux cleaned = 0.000996201 Jy ! Component: 150 - total flux cleaned = 0.000902944 Jy ! Component: 200 - total flux cleaned = 0.000814771 Jy ! Total flux subtracted in 200 components = 0.000814771 Jy ! Clean residual min=-0.001347 max=0.001429 Jy/beam ! Clean residual mean=0.000002 rms=0.000315 Jy/beam ! Combined flux in latest and established models = 0.041029 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 31 components and 0.041029 Jy ! Inverting map ! Added new window around map position (53.5, -33.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000641285 Jy ! Component: 100 - total flux cleaned = 0.000563123 Jy ! Component: 150 - total flux cleaned = 0.000489559 Jy ! Component: 200 - total flux cleaned = 0.000421517 Jy ! Total flux subtracted in 200 components = 0.000421517 Jy ! Clean residual min=-0.001260 max=0.001163 Jy/beam ! Clean residual mean=0.000002 rms=0.000303 Jy/beam ! Combined flux in latest and established models = 0.0414505 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 48 components and 0.0414505 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.446 mas, bmaj=10.79 mas, bpa=-10.82 degrees ! Estimated noise=553.092 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000142623 Jy ! Component: 100 - total flux cleaned = 0.000306392 Jy ! Component: 150 - total flux cleaned = 0.000336047 Jy ! Component: 200 - total flux cleaned = 0.00036215 Jy ! Total flux subtracted in 200 components = 0.00036215 Jy ! Clean residual min=-0.001289 max=0.001275 Jy/beam ! Clean residual mean=0.000005 rms=0.000363 Jy/beam ! Combined flux in latest and established models = 0.0418127 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.50611e-05 Jy ! Component: 100 - total flux cleaned = -4.89776e-05 Jy ! Component: 150 - total flux cleaned = -9.48157e-05 Jy ! Component: 200 - total flux cleaned = -0.000139012 Jy ! Total flux subtracted in 200 components = -0.000139012 Jy ! Clean residual min=-0.001266 max=0.001283 Jy/beam ! Clean residual mean=0.000005 rms=0.000361 Jy/beam ! Combined flux in latest and established models = 0.0416737 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 78 components and 0.0416737 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.313 mas, bmaj=6.987 mas, bpa=-7.126 degrees ! Estimated noise=439.585 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00017447 Jy ! Component: 100 - total flux cleaned = -0.000258212 Jy ! Component: 150 - total flux cleaned = -0.000311682 Jy ! Component: 200 - total flux cleaned = -0.000386615 Jy ! Total flux subtracted in 200 components = -0.000386615 Jy ! Clean residual min=-0.001189 max=0.001190 Jy/beam ! Clean residual mean=0.000003 rms=0.000298 Jy/beam ! Combined flux in latest and established models = 0.0412871 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 93 components and 0.0412871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.296597Jy sigma=0.000628 ! Fit after self-cal, rms=0.296600Jy sigma=0.000628 wmodel J1224+2436_S_2017_05_27_pus_map.mod ! Writing 93 model components to file: J1224+2436_S_2017_05_27_pus_map.mod wobs J1224+2436_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1224+2436_S_2017_05_27_pus_uvs.fits wwins J1224+2436_S_2017_05_27_pus_map.win ! wwins: Wrote 3 windows to J1224+2436_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 5.98259e-05 Jy ! Component: 100 - total flux cleaned = 9.99303e-05 Jy ! Component: 150 - total flux cleaned = 0.000118835 Jy ! Component: 200 - total flux cleaned = 6.20049e-05 Jy ! Component: 250 - total flux cleaned = 6.17978e-05 Jy ! Component: 300 - total flux cleaned = 2.5976e-05 Jy ! Component: 350 - total flux cleaned = -2.62627e-05 Jy ! Component: 400 - total flux cleaned = -4.34372e-05 Jy ! Component: 450 - total flux cleaned = -0.000110752 Jy ! Component: 500 - total flux cleaned = -0.000160627 Jy ! Component: 550 - total flux cleaned = -0.000209871 Jy ! Component: 600 - total flux cleaned = -0.000274685 Jy ! Component: 650 - total flux cleaned = -0.000354786 Jy ! Component: 700 - total flux cleaned = -0.000386567 Jy ! Component: 750 - total flux cleaned = -0.000433554 Jy ! Component: 800 - total flux cleaned = -0.000526281 Jy ! Component: 850 - total flux cleaned = -0.000526362 Jy ! Component: 900 - total flux cleaned = -0.000617143 Jy ! Component: 950 - total flux cleaned = -0.000676787 Jy ! Component: 1000 - total flux cleaned = -0.000676794 Jy ! Component: 1050 - total flux cleaned = -0.000706338 Jy ! Component: 1100 - total flux cleaned = -0.000764563 Jy ! Component: 1150 - total flux cleaned = -0.000850849 Jy ! Component: 1200 - total flux cleaned = -0.000907797 Jy ! Component: 1250 - total flux cleaned = -0.000964328 Jy ! Component: 1300 - total flux cleaned = -0.000992511 Jy ! Component: 1350 - total flux cleaned = -0.00104834 Jy ! Component: 1400 - total flux cleaned = -0.00108996 Jy ! Component: 1450 - total flux cleaned = -0.00114502 Jy ! Component: 1500 - total flux cleaned = -0.0012134 Jy ! Component: 1550 - total flux cleaned = -0.00122693 Jy ! Component: 1600 - total flux cleaned = -0.00132148 Jy ! Component: 1650 - total flux cleaned = -0.00132125 Jy ! Component: 1700 - total flux cleaned = -0.00134805 Jy ! Component: 1750 - total flux cleaned = -0.00137458 Jy ! Component: 1800 - total flux cleaned = -0.00144051 Jy ! Component: 1850 - total flux cleaned = -0.00147979 Jy ! Component: 1900 - total flux cleaned = -0.00150586 Jy ! Component: 1950 - total flux cleaned = -0.00154478 Jy ! Component: 2000 - total flux cleaned = -0.00159637 Jy ! Component: 2050 - total flux cleaned = -0.00163481 Jy ! Component: 2100 - total flux cleaned = -0.00168582 Jy ! Component: 2150 - total flux cleaned = -0.00172381 Jy ! Component: 2200 - total flux cleaned = -0.00172385 Jy ! Component: 2250 - total flux cleaned = -0.00177397 Jy ! Component: 2300 - total flux cleaned = -0.00176141 Jy ! Component: 2350 - total flux cleaned = -0.00183591 Jy ! Component: 2400 - total flux cleaned = -0.00184824 Jy ! Component: 2450 - total flux cleaned = -0.00187283 Jy ! Component: 2500 - total flux cleaned = -0.00192169 Jy ! Component: 2550 - total flux cleaned = -0.00189731 Jy ! Component: 2600 - total flux cleaned = -0.00192158 Jy ! Component: 2650 - total flux cleaned = -0.00192155 Jy ! Component: 2700 - total flux cleaned = -0.00195757 Jy ! Component: 2750 - total flux cleaned = -0.00196954 Jy ! Component: 2800 - total flux cleaned = -0.00198145 Jy ! Component: 2850 - total flux cleaned = -0.00198151 Jy ! Component: 2900 - total flux cleaned = -0.00204052 Jy ! Component: 2950 - total flux cleaned = -0.00202881 Jy ! Component: 3000 - total flux cleaned = -0.00200548 Jy ! Component: 3050 - total flux cleaned = -0.00202881 Jy ! Component: 3100 - total flux cleaned = -0.0020404 Jy ! Component: 3150 - total flux cleaned = -0.00206348 Jy ! Component: 3200 - total flux cleaned = -0.0020635 Jy ! Component: 3250 - total flux cleaned = -0.00205194 Jy ! Component: 3300 - total flux cleaned = -0.00205194 Jy ! Component: 3350 - total flux cleaned = -0.00202924 Jy ! Component: 3400 - total flux cleaned = -0.00204061 Jy ! Component: 3450 - total flux cleaned = -0.00204064 Jy ! Component: 3500 - total flux cleaned = -0.00202947 Jy ! Component: 3550 - total flux cleaned = -0.00206298 Jy ! Component: 3600 - total flux cleaned = -0.00207417 Jy ! Component: 3650 - total flux cleaned = -0.00205187 Jy ! Component: 3700 - total flux cleaned = -0.00206287 Jy ! Component: 3750 - total flux cleaned = -0.00209594 Jy ! Component: 3800 - total flux cleaned = -0.00205195 Jy ! Component: 3850 - total flux cleaned = -0.00209576 Jy ! Component: 3900 - total flux cleaned = -0.00208478 Jy ! Component: 3950 - total flux cleaned = -0.00207396 Jy ! Component: 4000 - total flux cleaned = -0.0020848 Jy ! Component: 4050 - total flux cleaned = -0.00210633 Jy ! Total flux subtracted in 4096 components = -0.0021063 Jy ! Clean residual min=-0.000622 max=0.000630 Jy/beam ! Clean residual mean=0.000002 rms=0.000204 Jy/beam ! Combined flux in latest and established models = 0.0391808 Jy keep ! Adding 295 model components to the UV plane model. ! The established model now contains 388 components and 0.0391808 Jy ![Exited script file: muppet] wmap "J1224+2436_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.313 x 6.987 at -7.126 degrees (North through East) ! Clean map min=-0.0021428 max=0.040202 Jy/beam ! Writing clean map to FITS file: J1224+2436_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0402021 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000204253 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.5242 1.5242 3.04839 6.09678 12.1936 24.3871 48.7742 97.5485 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.04 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.313 x 6.987 at -7.126 degrees (North through East) ! Clean map min=-0.0021428 max=0.040202 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1224+2436_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:06:15 2019