! Started logfile: J1224+2122_X_2017_05_27_pus_uvs.log on Fri May 3 10:35:13 2019 obs J1224+2122_X_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1224+2122_X_2017_05_27_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.961062 visibilities/baseline/integration-bin. ! Found source: J1224+2122 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1033 lines of history. ! ! Reading 58644 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1224+2122_X_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.532759Jy sigma=0.004703 ! Fit after self-cal, rms=0.505135Jy sigma=0.004487 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=0.7433 mas, bmaj=1.523 mas, bpa=-3.611 degrees ! Estimated noise=633.978 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.880083 Jy ! Component: 100 - total flux cleaned = 1.20506 Jy ! Total flux subtracted in 100 components = 1.20506 Jy ! Clean residual min=-0.051099 max=0.157452 Jy/beam ! Clean residual mean=-0.000277 rms=0.015911 Jy/beam ! Combined flux in latest and established models = 1.20506 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 1.20506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.356179Jy sigma=0.003180 ! Fit after self-cal, rms=0.350758Jy sigma=0.003139 ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.17772 Jy ! Component: 100 - total flux cleaned = 0.27367 Jy ! Total flux subtracted in 100 components = 0.27367 Jy ! Clean residual min=-0.032446 max=0.105908 Jy/beam ! Clean residual mean=-0.000128 rms=0.009258 Jy/beam ! Combined flux in latest and established models = 1.47873 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 20 components and 1.47873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.214541Jy sigma=0.001879 ! Fit after self-cal, rms=0.211843Jy sigma=0.001861 ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Added new window around map position (-0.2, 2.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0921187 Jy ! Component: 100 - total flux cleaned = 0.144476 Jy ! Total flux subtracted in 100 components = 0.144476 Jy ! Clean residual min=-0.028323 max=0.038267 Jy/beam ! Clean residual mean=-0.000050 rms=0.006231 Jy/beam ! Combined flux in latest and established models = 1.62321 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 31 components and 1.62321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.155992Jy sigma=0.001344 ! Fit after self-cal, rms=0.151833Jy sigma=0.001314 ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0430583 Jy ! Component: 100 - total flux cleaned = 0.0724582 Jy ! Total flux subtracted in 100 components = 0.0724582 Jy ! Clean residual min=-0.022953 max=0.036164 Jy/beam ! Clean residual mean=-0.000009 rms=0.004942 Jy/beam ! Combined flux in latest and established models = 1.69567 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 38 components and 1.69567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.135618Jy sigma=0.001157 ! Fit after self-cal, rms=0.134288Jy sigma=0.001147 ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Added new window around map position (0.4, 9.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0336616 Jy ! Component: 100 - total flux cleaned = 0.0573659 Jy ! Total flux subtracted in 100 components = 0.0573659 Jy ! Clean residual min=-0.018667 max=0.024275 Jy/beam ! Clean residual mean=0.000004 rms=0.004137 Jy/beam ! Combined flux in latest and established models = 1.75303 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 47 components and 1.75303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.122673Jy sigma=0.001034 ! Fit after self-cal, rms=0.122212Jy sigma=0.001031 ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=0.9236 mas, bmaj=1.835 mas, bpa=-3.223 degrees ! Estimated noise=339.497 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.4, 10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0327225 Jy ! Component: 100 - total flux cleaned = 0.0553847 Jy ! Component: 150 - total flux cleaned = 0.0737684 Jy ! Component: 200 - total flux cleaned = 0.0889896 Jy ! Total flux subtracted in 200 components = 0.0889896 Jy ! Clean residual min=-0.015759 max=0.016595 Jy/beam ! Clean residual mean=0.000046 rms=0.003590 Jy/beam ! Combined flux in latest and established models = 1.84202 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 64 components and 1.84202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.110221Jy sigma=0.000916 ! Fit after self-cal, rms=0.109521Jy sigma=0.000911 ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 1.00 KP 1.01 ! LA 0.96 MK 0.99 NL 0.96 OV 0.99 ! PT 1.01 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 0.98 KP 1.00 ! LA 0.97 MK 0.99 NL 0.96 OV 0.99 ! PT 1.00 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 0.98 KP 1.01 ! LA 0.99 MK 1.00 NL 0.96 OV 0.99 ! PT 1.03 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 1.01 KP 1.00 ! LA 0.99 MK 1.01 NL 0.96 OV 0.99 ! PT 1.04 SC 1.06 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 0.97 KP 1.01 ! LA 0.99 MK 1.03 NL 0.95 OV 0.99 ! PT 1.04 SC 1.04 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 1.00 KP 1.00 ! LA 0.99 MK 1.01 NL 0.96 OV 0.99 ! PT 1.03 SC 1.06 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 0.99 KP 1.00 ! LA 1.00 MK 1.02 NL 0.96 OV 0.99 ! PT 1.04 SC 1.06 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 0.99 KP 1.00 ! LA 0.97 MK 1.01 NL 0.96 OV 0.99 ! PT 1.05 SC 1.06 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.00 KP 1.00 ! LA 0.99 MK 0.99 NL 0.96 OV 0.99 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 1.00 KP 1.00 ! LA 1.01 MK 1.01 NL 0.96 OV 1.00 ! PT 1.04 SC 1.01 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 1.03 KP 1.00 ! LA 1.00 MK 1.01 NL 0.96 OV 0.99 ! PT 1.05 SC 1.03 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 1.02 KP 0.97 ! LA 0.98 MK 0.98 NL 0.96 OV 1.00 ! PT 1.06 SC 1.04 ! ! ! Fit before self-cal, rms=0.109521Jy sigma=0.000911 ! Fit after self-cal, rms=0.097763Jy sigma=0.000805 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=0.9308 mas, bmaj=1.845 mas, bpa=-3.707 degrees ! Estimated noise=337.569 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0148422 Jy ! Component: 100 - total flux cleaned = 0.0213166 Jy ! Component: 150 - total flux cleaned = 0.0271525 Jy ! Component: 200 - total flux cleaned = 0.0321041 Jy ! Total flux subtracted in 200 components = 0.0321041 Jy ! Clean residual min=-0.009240 max=0.011131 Jy/beam ! Clean residual mean=0.000003 rms=0.002119 Jy/beam ! Combined flux in latest and established models = 1.87412 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 80 components and 1.87412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093989Jy sigma=0.000769 ! Fit after self-cal, rms=0.093769Jy sigma=0.000767 ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Added new window around map position (-2, 13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00928628 Jy ! Component: 100 - total flux cleaned = 0.0139078 Jy ! Component: 150 - total flux cleaned = 0.0179397 Jy ! Component: 200 - total flux cleaned = 0.0218317 Jy ! Total flux subtracted in 200 components = 0.0218317 Jy ! Clean residual min=-0.008105 max=0.008738 Jy/beam ! Clean residual mean=-0.000005 rms=0.001823 Jy/beam ! Combined flux in latest and established models = 1.89596 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 97 components and 1.89596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.091882Jy sigma=0.000750 ! Fit after self-cal, rms=0.091745Jy sigma=0.000749 ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.091745Jy sigma=0.000749 ! Fit after self-cal, rms=0.088756Jy sigma=0.000724 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=0.93 mas, bmaj=1.836 mas, bpa=-3.745 degrees ! Estimated noise=336.534 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00698402 Jy ! Component: 100 - total flux cleaned = 0.0107823 Jy ! Component: 150 - total flux cleaned = 0.0136436 Jy ! Component: 200 - total flux cleaned = 0.0163111 Jy ! Total flux subtracted in 200 components = 0.0163111 Jy ! Clean residual min=-0.006128 max=0.007980 Jy/beam ! Clean residual mean=0.000010 rms=0.001292 Jy/beam ! Combined flux in latest and established models = 1.91227 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 106 components and 1.91227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087767Jy sigma=0.000715 ! Fit after self-cal, rms=0.087686Jy sigma=0.000714 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, 9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00651947 Jy ! Component: 100 - total flux cleaned = 0.00911315 Jy ! Component: 150 - total flux cleaned = 0.0113224 Jy ! Component: 200 - total flux cleaned = 0.0122415 Jy ! Total flux subtracted in 200 components = 0.0122415 Jy ! Clean residual min=-0.005138 max=0.006955 Jy/beam ! Clean residual mean=0.000017 rms=0.001135 Jy/beam ! Combined flux in latest and established models = 1.92451 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 119 components and 1.92451 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086954Jy sigma=0.000708 ! Fit after self-cal, rms=0.086895Jy sigma=0.000707 ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Added new window around map position (0.6, 15.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00515624 Jy ! Component: 100 - total flux cleaned = 0.00734169 Jy ! Component: 150 - total flux cleaned = 0.00923207 Jy ! Component: 200 - total flux cleaned = 0.0107037 Jy ! Total flux subtracted in 200 components = 0.0107037 Jy ! Clean residual min=-0.004495 max=0.004361 Jy/beam ! Clean residual mean=0.000005 rms=0.000995 Jy/beam ! Combined flux in latest and established models = 1.93521 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 136 components and 1.93521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086303Jy sigma=0.000702 ! Fit after self-cal, rms=0.086247Jy sigma=0.000702 ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Added new window around map position (1.2, 2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000553064 Jy ! Component: 100 - total flux cleaned = 0.000822894 Jy ! Component: 150 - total flux cleaned = 0.00211534 Jy ! Component: 200 - total flux cleaned = 0.00265496 Jy ! Total flux subtracted in 200 components = 0.00265496 Jy ! Clean residual min=-0.004102 max=0.003647 Jy/beam ! Clean residual mean=0.000004 rms=0.000912 Jy/beam ! Combined flux in latest and established models = 1.93787 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 150 components and 1.93787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085853Jy sigma=0.000698 ! Fit after self-cal, rms=0.085809Jy sigma=0.000698 ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085809Jy sigma=0.000698 ! Fit after self-cal, rms=0.085614Jy sigma=0.000697 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=0.9298 mas, bmaj=1.835 mas, bpa=-3.803 degrees ! Estimated noise=336.233 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00295935 Jy ! Component: 100 - total flux cleaned = 0.00398643 Jy ! Component: 150 - total flux cleaned = 0.00462218 Jy ! Component: 200 - total flux cleaned = 0.00521513 Jy ! Total flux subtracted in 200 components = 0.00521513 Jy ! Clean residual min=-0.003786 max=0.003324 Jy/beam ! Clean residual mean=0.000006 rms=0.000796 Jy/beam ! Combined flux in latest and established models = 1.94308 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 162 components and 1.94308 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085334Jy sigma=0.000694 ! Fit after self-cal, rms=0.085311Jy sigma=0.000694 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0004842 Jy ! Component: 100 - total flux cleaned = 0.00123874 Jy ! Component: 150 - total flux cleaned = 0.0017716 Jy ! Component: 200 - total flux cleaned = 0.00228029 Jy ! Total flux subtracted in 200 components = 0.00228029 Jy ! Clean residual min=-0.003592 max=0.003028 Jy/beam ! Clean residual mean=0.000006 rms=0.000751 Jy/beam ! Combined flux in latest and established models = 1.94536 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 170 components and 1.94536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085125Jy sigma=0.000692 ! Fit after self-cal, rms=0.085102Jy sigma=0.000692 ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085102Jy sigma=0.000692 ! Fit after self-cal, rms=0.085069Jy sigma=0.000692 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=2.12 mas, bmaj=2.812 mas, bpa=-3.351 degrees ! Estimated noise=416.997 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00278281 Jy ! Component: 100 - total flux cleaned = 0.00431469 Jy ! Component: 150 - total flux cleaned = 0.00561221 Jy ! Component: 200 - total flux cleaned = 0.00675602 Jy ! Total flux subtracted in 200 components = 0.00675602 Jy ! Clean residual min=-0.001886 max=0.002173 Jy/beam ! Clean residual mean=0.000012 rms=0.000656 Jy/beam ! Combined flux in latest and established models = 1.95212 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 191 components and 1.95212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084965Jy sigma=0.000691 ! Fit after self-cal, rms=0.084937Jy sigma=0.000691 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000430752 Jy ! Component: 100 - total flux cleaned = 0.00146633 Jy ! Component: 150 - total flux cleaned = 0.00252067 Jy ! Component: 200 - total flux cleaned = 0.00343725 Jy ! Total flux subtracted in 200 components = 0.00343725 Jy ! Clean residual min=-0.001787 max=0.002098 Jy/beam ! Clean residual mean=0.000010 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 1.95556 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 203 components and 1.95556 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084887Jy sigma=0.000690 ! Fit after self-cal, rms=0.084864Jy sigma=0.000690 ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=0.9296 mas, bmaj=1.835 mas, bpa=-3.831 degrees ! Estimated noise=336.123 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9296 x 1.835 at -3.831 degrees (North through East) ! Clean map min=-0.0025151 max=1.1656 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084864Jy sigma=0.000690 ! Fit after self-cal, rms=0.075057Jy sigma=0.000618 ! Inverting map and beam ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=0.9297 mas, bmaj=1.835 mas, bpa=-3.848 degrees ! Estimated noise=336.024 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000252985 Jy ! Component: 100 - total flux cleaned = -7.36155e-06 Jy ! Component: 150 - total flux cleaned = -8.83565e-05 Jy ! Component: 200 - total flux cleaned = -8.87101e-05 Jy ! Total flux subtracted in 200 components = -8.87101e-05 Jy ! Clean residual min=-0.003027 max=0.002438 Jy/beam ! Clean residual mean=0.000006 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 1.95547 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 213 components and 1.95547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074880Jy sigma=0.000617 ! Fit after self-cal, rms=0.074864Jy sigma=0.000617 ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.73792e-05 Jy ! Component: 100 - total flux cleaned = 0.000118136 Jy ! Component: 150 - total flux cleaned = 0.000253953 Jy ! Component: 200 - total flux cleaned = 0.000319836 Jy ! Total flux subtracted in 200 components = 0.000319836 Jy ! Clean residual min=-0.002932 max=0.002404 Jy/beam ! Clean residual mean=0.000005 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 1.95579 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 220 components and 1.95579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074734Jy sigma=0.000616 ! Fit after self-cal, rms=0.074719Jy sigma=0.000615 ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074719Jy sigma=0.000615 ! Fit after self-cal, rms=0.074711Jy sigma=0.000615 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=0.7477 mas, bmaj=1.522 mas, bpa=-4.312 degrees ! Estimated noise=628.427 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.878994 Jy ! Component: 100 - total flux cleaned = 1.22642 Jy ! Component: 150 - total flux cleaned = 1.40998 Jy ! Component: 200 - total flux cleaned = 1.51754 Jy ! Total flux subtracted in 200 components = 1.51754 Jy ! Clean residual min=-0.022136 max=0.055415 Jy/beam ! Clean residual mean=-0.000115 rms=0.006283 Jy/beam ! Combined flux in latest and established models = 1.51754 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 1.51754 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=0.9296 mas, bmaj=1.835 mas, bpa=-3.868 degrees ! Estimated noise=336.023 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0920744 Jy ! Component: 100 - total flux cleaned = 0.147624 Jy ! Component: 150 - total flux cleaned = 0.189181 Jy ! Component: 200 - total flux cleaned = 0.22155 Jy ! Total flux subtracted in 200 components = 0.22155 Jy ! Clean residual min=-0.011943 max=0.019387 Jy/beam ! Clean residual mean=-0.000048 rms=0.003822 Jy/beam ! Combined flux in latest and established models = 1.73909 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 59 components and 1.73909 Jy ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Added new window around map position (-0.4, 3.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.025794 Jy ! Component: 100 - total flux cleaned = 0.0469604 Jy ! Component: 150 - total flux cleaned = 0.0647711 Jy ! Component: 200 - total flux cleaned = 0.0799448 Jy ! Total flux subtracted in 200 components = 0.0799448 Jy ! Clean residual min=-0.007438 max=0.009408 Jy/beam ! Clean residual mean=-0.000002 rms=0.002295 Jy/beam ! Combined flux in latest and established models = 1.81903 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 89 components and 1.81904 Jy ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=2.12 mas, bmaj=2.812 mas, bpa=-3.377 degrees ! Estimated noise=416.877 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0227589 Jy ! Component: 100 - total flux cleaned = 0.0400121 Jy ! Component: 150 - total flux cleaned = 0.053771 Jy ! Component: 200 - total flux cleaned = 0.0650786 Jy ! Total flux subtracted in 200 components = 0.0650786 Jy ! Clean residual min=-0.006289 max=0.006877 Jy/beam ! Clean residual mean=0.000006 rms=0.002282 Jy/beam ! Combined flux in latest and established models = 1.88411 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00949239 Jy ! Component: 100 - total flux cleaned = 0.0175616 Jy ! Component: 150 - total flux cleaned = 0.0244843 Jy ! Component: 200 - total flux cleaned = 0.030463 Jy ! Total flux subtracted in 200 components = 0.030463 Jy ! Clean residual min=-0.004273 max=0.003714 Jy/beam ! Clean residual mean=0.000006 rms=0.001391 Jy/beam ! Combined flux in latest and established models = 1.91458 Jy ! Adding 139 model components to the UV plane model. ! The established model now contains 204 components and 1.91458 Jy ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=0.9296 mas, bmaj=1.835 mas, bpa=-3.868 degrees ! Estimated noise=336.023 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00597478 Jy ! Component: 100 - total flux cleaned = 0.0094998 Jy ! Component: 150 - total flux cleaned = 0.0126688 Jy ! Component: 200 - total flux cleaned = 0.0150566 Jy ! Total flux subtracted in 200 components = 0.0150566 Jy ! Clean residual min=-0.003704 max=0.003513 Jy/beam ! Clean residual mean=0.000007 rms=0.000850 Jy/beam ! Combined flux in latest and established models = 1.92963 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 233 components and 1.92963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075585Jy sigma=0.000624 ! Fit after self-cal, rms=0.075328Jy sigma=0.000621 wmodel J1224+2122_X_2017_05_27_pus_map.mod ! Writing 233 model components to file: J1224+2122_X_2017_05_27_pus_map.mod wobs J1224+2122_X_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1224+2122_X_2017_05_27_pus_uvs.fits wwins J1224+2122_X_2017_05_27_pus_map.win ! wwins: Wrote 9 windows to J1224+2122_X_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148387 Jy ! Component: 100 - total flux cleaned = 0.0012515 Jy ! Component: 150 - total flux cleaned = 0.00102772 Jy ! Component: 200 - total flux cleaned = 0.000701738 Jy ! Component: 250 - total flux cleaned = 0.000437455 Jy ! Component: 300 - total flux cleaned = 0.000231836 Jy ! Component: 350 - total flux cleaned = 0.000131769 Jy ! Component: 400 - total flux cleaned = -0.000113575 Jy ! Component: 450 - total flux cleaned = -0.000304204 Jy ! Component: 500 - total flux cleaned = -0.000350496 Jy ! Component: 550 - total flux cleaned = -0.000350252 Jy ! Component: 600 - total flux cleaned = -0.000485103 Jy ! Component: 650 - total flux cleaned = -0.000616229 Jy ! Component: 700 - total flux cleaned = -0.00078916 Jy ! Component: 750 - total flux cleaned = -0.00108449 Jy ! Component: 800 - total flux cleaned = -0.00120744 Jy ! Component: 850 - total flux cleaned = -0.00128865 Jy ! Component: 900 - total flux cleaned = -0.00141038 Jy ! Component: 950 - total flux cleaned = -0.00148971 Jy ! Component: 1000 - total flux cleaned = -0.00152863 Jy ! Component: 1050 - total flux cleaned = -0.00164286 Jy ! Component: 1100 - total flux cleaned = -0.00160471 Jy ! Component: 1150 - total flux cleaned = -0.00153109 Jy ! Component: 1200 - total flux cleaned = -0.00149488 Jy ! Component: 1250 - total flux cleaned = -0.00149544 Jy ! Component: 1300 - total flux cleaned = -0.00160123 Jy ! Component: 1350 - total flux cleaned = -0.00167049 Jy ! Component: 1400 - total flux cleaned = -0.0016359 Jy ! Component: 1450 - total flux cleaned = -0.0015681 Jy ! Component: 1500 - total flux cleaned = -0.00170164 Jy ! Component: 1550 - total flux cleaned = -0.00173443 Jy ! Component: 1600 - total flux cleaned = -0.00163632 Jy ! Component: 1650 - total flux cleaned = -0.0016689 Jy ! Component: 1700 - total flux cleaned = -0.00173271 Jy ! Component: 1750 - total flux cleaned = -0.00173268 Jy ! Component: 1800 - total flux cleaned = -0.00179546 Jy ! Component: 1850 - total flux cleaned = -0.00179572 Jy ! Component: 1900 - total flux cleaned = -0.00179576 Jy ! Component: 1950 - total flux cleaned = -0.00185598 Jy ! Component: 2000 - total flux cleaned = -0.00182646 Jy ! Total flux subtracted in 2048 components = -0.00188554 Jy ! Clean residual min=-0.001605 max=0.001492 Jy/beam ! Clean residual mean=0.000003 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 1.92775 Jy keep ! Adding 129 model components to the UV plane model. ! The established model now contains 350 components and 1.92775 Jy ![Exited script file: muppet] wmap "J1224+2122_X_2017_05_27_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9296 x 1.835 at -3.868 degrees (North through East) ! Clean map min=-0.0024541 max=1.1652 Jy/beam ! Writing clean map to FITS file: J1224+2122_X_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.16523 invert ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000506038 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.130284 0.130284 0.260568 0.521136 1.04227 2.08455 4.16909 8.33818 16.6764 33.3527 66.7055 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.165 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9296 x 1.835 at -3.868 degrees (North through East) ! Clean map min=-0.0024541 max=1.1652 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1224+2122_X_2017_05_27_pus_uvs.log closed on Fri May 3 10:35:18 2019