! Started logfile: J1223+8436_S_2017_10_09_pus_uvs.log on Sun May 12 13:12:27 2019 obs J1223+8436_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1223+8436_S_2017_10_09_pus_uva.fits ! AN table 1: 219 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.755708 visibilities/baseline/integration-bin. ! Found source: J1223+8436 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 23832 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1223+8436_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 246 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 465 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 261 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1031 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.932204Jy sigma=0.007635 ! Fit after self-cal, rms=0.916884Jy sigma=0.007516 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.58 mas, bmaj=6.161 mas, bpa=21.36 degrees ! Estimated noise=1191.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0623363 Jy ! Component: 100 - total flux cleaned = 0.0798105 Jy ! Total flux subtracted in 100 components = 0.0798105 Jy ! Clean residual min=-0.004904 max=0.007349 Jy/beam ! Clean residual mean=-0.000039 rms=0.001415 Jy/beam ! Combined flux in latest and established models = 0.0798105 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0798105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094618Jy sigma=0.000689 ! Fit after self-cal, rms=0.094528Jy sigma=0.000688 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.292 mas, bmaj=7.28 mas, bpa=20.22 degrees ! Estimated noise=658.802 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127521 Jy ! Component: 100 - total flux cleaned = 0.0186952 Jy ! Component: 150 - total flux cleaned = 0.0219529 Jy ! Component: 200 - total flux cleaned = 0.0239028 Jy ! Total flux subtracted in 200 components = 0.0239028 Jy ! Clean residual min=-0.003409 max=0.003951 Jy/beam ! Clean residual mean=-0.000063 rms=0.000982 Jy/beam ! Combined flux in latest and established models = 0.103713 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 40 components and 0.103713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092704Jy sigma=0.000675 ! Fit after self-cal, rms=0.092617Jy sigma=0.000675 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 1.00 KP 1.04 ! LA 0.98 MK 1.01 NL 1.11 OV 1.00* ! PT 1.00 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.04 HN 1.02 KP 0.99 ! LA 0.98 MK 1.01 NL 1.00* OV 1.00* ! PT 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.04 HN 1.03 KP 0.88 ! LA 0.79 MK 1.06 NL 1.13 OV 1.00* ! PT 0.96 ! ! ! Correcting IF 4. ! A total of 102 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 0.99 KP 1.00* ! LA 0.79 MK 0.88 NL 1.00* OV 1.00* ! PT 1.03 ! ! ! Fit before self-cal, rms=0.092617Jy sigma=0.000675 ! Fit after self-cal, rms=0.092459Jy sigma=0.000671 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.306 mas, bmaj=7.293 mas, bpa=20.22 degrees ! Estimated noise=659.762 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000258166 Jy ! Component: 100 - total flux cleaned = 0.000307177 Jy ! Component: 150 - total flux cleaned = 0.000376774 Jy ! Component: 200 - total flux cleaned = 0.00041791 Jy ! Total flux subtracted in 200 components = 0.00041791 Jy ! Clean residual min=-0.002779 max=0.003523 Jy/beam ! Clean residual mean=-0.000029 rms=0.000808 Jy/beam ! Combined flux in latest and established models = 0.104131 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 43 components and 0.104131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092420Jy sigma=0.000670 ! Fit after self-cal, rms=0.092430Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092430Jy sigma=0.000670 ! Fit after self-cal, rms=0.090656Jy sigma=0.000666 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.299 mas, bmaj=7.344 mas, bpa=20.45 degrees ! Estimated noise=660.827 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.08657e-06 Jy ! Component: 100 - total flux cleaned = -6.11797e-05 Jy ! Component: 150 - total flux cleaned = -0.0001136 Jy ! Component: 200 - total flux cleaned = -0.000128396 Jy ! Total flux subtracted in 200 components = -0.000128396 Jy ! Clean residual min=-0.002564 max=0.003515 Jy/beam ! Clean residual mean=-0.000027 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.104003 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 50 components and 0.104003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090636Jy sigma=0.000666 ! Fit after self-cal, rms=0.090719Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7.5, 31). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00300554 Jy ! Component: 100 - total flux cleaned = 0.00364181 Jy ! Component: 150 - total flux cleaned = 0.00364303 Jy ! Component: 200 - total flux cleaned = 0.00360255 Jy ! Total flux subtracted in 200 components = 0.00360255 Jy ! Clean residual min=-0.002436 max=0.002740 Jy/beam ! Clean residual mean=-0.000017 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.107605 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 66 components and 0.107605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090626Jy sigma=0.000665 ! Fit after self-cal, rms=0.090605Jy sigma=0.000664 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090605Jy sigma=0.000664 ! Fit after self-cal, rms=0.090274Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.29 mas, bmaj=7.337 mas, bpa=20.7 degrees ! Estimated noise=657.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119973 Jy ! Component: 100 - total flux cleaned = 0.00145646 Jy ! Component: 150 - total flux cleaned = 0.00149484 Jy ! Component: 200 - total flux cleaned = 0.00155961 Jy ! Total flux subtracted in 200 components = 0.00155961 Jy ! Clean residual min=-0.002340 max=0.002534 Jy/beam ! Clean residual mean=-0.000017 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.109165 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 78 components and 0.109165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090241Jy sigma=0.000664 ! Fit after self-cal, rms=0.090245Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000350835 Jy ! Component: 100 - total flux cleaned = 0.000351085 Jy ! Component: 150 - total flux cleaned = 0.000352781 Jy ! Component: 200 - total flux cleaned = 0.000380013 Jy ! Total flux subtracted in 200 components = 0.000380013 Jy ! Clean residual min=-0.002311 max=0.002403 Jy/beam ! Clean residual mean=-0.000016 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.109545 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 86 components and 0.109545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090227Jy sigma=0.000664 ! Fit after self-cal, rms=0.090224Jy sigma=0.000664 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090224Jy sigma=0.000664 ! Fit after self-cal, rms=0.090041Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.996 mas, bmaj=11.99 mas, bpa=8.943 degrees ! Estimated noise=842.888 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100629 Jy ! Component: 100 - total flux cleaned = 0.00129557 Jy ! Component: 150 - total flux cleaned = 0.00139346 Jy ! Component: 200 - total flux cleaned = 0.00145077 Jy ! Total flux subtracted in 200 components = 0.00145077 Jy ! Clean residual min=-0.002258 max=0.002551 Jy/beam ! Clean residual mean=-0.000028 rms=0.000698 Jy/beam ! Combined flux in latest and established models = 0.110996 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 98 components and 0.110996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090039Jy sigma=0.000663 ! Fit after self-cal, rms=0.090031Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000219859 Jy ! Component: 100 - total flux cleaned = 0.000333873 Jy ! Component: 150 - total flux cleaned = 0.000351194 Jy ! Component: 200 - total flux cleaned = 0.000366795 Jy ! Total flux subtracted in 200 components = 0.000366795 Jy ! Clean residual min=-0.002230 max=0.002529 Jy/beam ! Clean residual mean=-0.000026 rms=0.000687 Jy/beam ! Combined flux in latest and established models = 0.111363 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 100 components and 0.111363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090032Jy sigma=0.000663 ! Fit after self-cal, rms=0.090030Jy sigma=0.000663 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.286 mas, bmaj=7.332 mas, bpa=20.78 degrees ! Estimated noise=656.412 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.286 x 7.332 at 20.78 degrees (North through East) ! Clean map min=-0.0022449 max=0.079583 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.56 mas, bmaj=6.207 mas, bpa=22.21 degrees ! Estimated noise=1182.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0613966 Jy ! Component: 100 - total flux cleaned = 0.0809356 Jy ! Component: 150 - total flux cleaned = 0.089952 Jy ! Component: 200 - total flux cleaned = 0.0955136 Jy ! Total flux subtracted in 200 components = 0.0955136 Jy ! Clean residual min=-0.004647 max=0.005291 Jy/beam ! Clean residual mean=-0.000019 rms=0.001070 Jy/beam ! Combined flux in latest and established models = 0.0955136 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.0955136 Jy ! Inverting map and beam ! Estimated beam: bmin=3.286 mas, bmaj=7.332 mas, bpa=20.78 degrees ! Estimated noise=656.412 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.5, 6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00644303 Jy ! Component: 100 - total flux cleaned = 0.00967977 Jy ! Component: 150 - total flux cleaned = 0.0109576 Jy ! Component: 200 - total flux cleaned = 0.0119079 Jy ! Total flux subtracted in 200 components = 0.0119079 Jy ! Clean residual min=-0.002404 max=0.002955 Jy/beam ! Clean residual mean=-0.000026 rms=0.000622 Jy/beam ! Combined flux in latest and established models = 0.107421 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 63 components and 0.107421 Jy ! Inverting map ! Added new window around map position (-1.5, 45.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00261901 Jy ! Component: 100 - total flux cleaned = 0.00319437 Jy ! Component: 150 - total flux cleaned = 0.00379298 Jy ! Component: 200 - total flux cleaned = 0.00421884 Jy ! Total flux subtracted in 200 components = 0.00421884 Jy ! Clean residual min=-0.002247 max=0.002290 Jy/beam ! Clean residual mean=-0.000013 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.11164 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 84 components and 0.11164 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.996 mas, bmaj=11.99 mas, bpa=8.943 degrees ! Estimated noise=842.888 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00121452 Jy ! Component: 100 - total flux cleaned = 0.00137414 Jy ! Component: 150 - total flux cleaned = 0.00145618 Jy ! Component: 200 - total flux cleaned = 0.00148043 Jy ! Total flux subtracted in 200 components = 0.00148043 Jy ! Clean residual min=-0.002280 max=0.002264 Jy/beam ! Clean residual mean=-0.000016 rms=0.000638 Jy/beam ! Combined flux in latest and established models = 0.113121 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.80591e-07 Jy ! Component: 100 - total flux cleaned = 2.20802e-05 Jy ! Component: 150 - total flux cleaned = 2.14071e-05 Jy ! Component: 200 - total flux cleaned = 2.15256e-05 Jy ! Total flux subtracted in 200 components = 2.15256e-05 Jy ! Clean residual min=-0.002207 max=0.002240 Jy/beam ! Clean residual mean=-0.000016 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 0.113142 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 118 components and 0.113142 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.286 mas, bmaj=7.332 mas, bpa=20.78 degrees ! Estimated noise=656.412 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000246399 Jy ! Component: 100 - total flux cleaned = -0.000167473 Jy ! Component: 150 - total flux cleaned = -0.000166412 Jy ! Component: 200 - total flux cleaned = -0.000101536 Jy ! Total flux subtracted in 200 components = -0.000101536 Jy ! Clean residual min=-0.002050 max=0.002261 Jy/beam ! Clean residual mean=-0.000009 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 0.113041 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 141 components and 0.113041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089955Jy sigma=0.000663 ! Fit after self-cal, rms=0.089924Jy sigma=0.000662 wmodel J1223+8436_S_2017_10_09_pus_map.mod ! Writing 141 model components to file: J1223+8436_S_2017_10_09_pus_map.mod wobs J1223+8436_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1223+8436_S_2017_10_09_pus_uvs.fits wwins J1223+8436_S_2017_10_09_pus_map.win ! wwins: Wrote 4 windows to J1223+8436_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000658545 Jy ! Component: 100 - total flux cleaned = 0.000877109 Jy ! Component: 150 - total flux cleaned = 0.00105082 Jy ! Component: 200 - total flux cleaned = 0.00108396 Jy ! Component: 250 - total flux cleaned = 0.00105264 Jy ! Component: 300 - total flux cleaned = 0.000991699 Jy ! Component: 350 - total flux cleaned = 0.000961597 Jy ! Component: 400 - total flux cleaned = 0.000932103 Jy ! Component: 450 - total flux cleaned = 0.000849281 Jy ! Component: 500 - total flux cleaned = 0.00084993 Jy ! Component: 550 - total flux cleaned = 0.000823052 Jy ! Component: 600 - total flux cleaned = 0.000746987 Jy ! Component: 650 - total flux cleaned = 0.000747155 Jy ! Component: 700 - total flux cleaned = 0.00072311 Jy ! Component: 750 - total flux cleaned = 0.000747182 Jy ! Component: 800 - total flux cleaned = 0.000724112 Jy ! Component: 850 - total flux cleaned = 0.000770055 Jy ! Component: 900 - total flux cleaned = 0.000814593 Jy ! Component: 950 - total flux cleaned = 0.00087996 Jy ! Component: 1000 - total flux cleaned = 0.000923101 Jy ! Component: 1050 - total flux cleaned = 0.000923358 Jy ! Component: 1100 - total flux cleaned = 0.00098535 Jy ! Component: 1150 - total flux cleaned = 0.00104613 Jy ! Component: 1200 - total flux cleaned = 0.001066 Jy ! Component: 1250 - total flux cleaned = 0.00108562 Jy ! Component: 1300 - total flux cleaned = 0.00110471 Jy ! Component: 1350 - total flux cleaned = 0.00110489 Jy ! Component: 1400 - total flux cleaned = 0.00114236 Jy ! Component: 1450 - total flux cleaned = 0.00108691 Jy ! Component: 1500 - total flux cleaned = 0.00110521 Jy ! Component: 1550 - total flux cleaned = 0.00110528 Jy ! Component: 1600 - total flux cleaned = 0.00112281 Jy ! Component: 1650 - total flux cleaned = 0.00108761 Jy ! Component: 1700 - total flux cleaned = 0.00108748 Jy ! Component: 1750 - total flux cleaned = 0.00110442 Jy ! Component: 1800 - total flux cleaned = 0.00107065 Jy ! Component: 1850 - total flux cleaned = 0.00108707 Jy ! Component: 1900 - total flux cleaned = 0.0010705 Jy ! Component: 1950 - total flux cleaned = 0.00108682 Jy ! Component: 2000 - total flux cleaned = 0.00102263 Jy ! Component: 2050 - total flux cleaned = 0.00102271 Jy ! Component: 2100 - total flux cleaned = 0.000991305 Jy ! Component: 2150 - total flux cleaned = 0.00097575 Jy ! Component: 2200 - total flux cleaned = 0.000944889 Jy ! Component: 2250 - total flux cleaned = 0.000929556 Jy ! Component: 2300 - total flux cleaned = 0.000914752 Jy ! Component: 2350 - total flux cleaned = 0.000929389 Jy ! Component: 2400 - total flux cleaned = 0.000870407 Jy ! Component: 2450 - total flux cleaned = 0.000885216 Jy ! Component: 2500 - total flux cleaned = 0.000885036 Jy ! Component: 2550 - total flux cleaned = 0.000799094 Jy ! Component: 2600 - total flux cleaned = 0.00082742 Jy ! Component: 2650 - total flux cleaned = 0.000855786 Jy ! Component: 2700 - total flux cleaned = 0.00085581 Jy ! Component: 2750 - total flux cleaned = 0.000841719 Jy ! Component: 2800 - total flux cleaned = 0.000855401 Jy ! Component: 2850 - total flux cleaned = 0.000841892 Jy ! Component: 2900 - total flux cleaned = 0.000895823 Jy ! Component: 2950 - total flux cleaned = 0.000976035 Jy ! Component: 3000 - total flux cleaned = 0.000949337 Jy ! Component: 3050 - total flux cleaned = 0.00101539 Jy ! Component: 3100 - total flux cleaned = 0.00105464 Jy ! Component: 3150 - total flux cleaned = 0.00104153 Jy ! Component: 3200 - total flux cleaned = 0.00105452 Jy ! Component: 3250 - total flux cleaned = 0.00110584 Jy ! Component: 3300 - total flux cleaned = 0.00110575 Jy ! Component: 3350 - total flux cleaned = 0.00114368 Jy ! Component: 3400 - total flux cleaned = 0.0011813 Jy ! Component: 3450 - total flux cleaned = 0.0011813 Jy ! Component: 3500 - total flux cleaned = 0.00116885 Jy ! Component: 3550 - total flux cleaned = 0.00116875 Jy ! Component: 3600 - total flux cleaned = 0.00119325 Jy ! Component: 3650 - total flux cleaned = 0.0012176 Jy ! Component: 3700 - total flux cleaned = 0.00125379 Jy ! Component: 3750 - total flux cleaned = 0.00122977 Jy ! Component: 3800 - total flux cleaned = 0.00127751 Jy ! Component: 3850 - total flux cleaned = 0.00125376 Jy ! Component: 3900 - total flux cleaned = 0.00124196 Jy ! Component: 3950 - total flux cleaned = 0.0012068 Jy ! Component: 4000 - total flux cleaned = 0.00124172 Jy ! Component: 4050 - total flux cleaned = 0.00123006 Jy ! Total flux subtracted in 4096 components = 0.0011839 Jy ! Clean residual min=-0.000868 max=0.000794 Jy/beam ! Clean residual mean=-0.000004 rms=0.000208 Jy/beam ! Combined flux in latest and established models = 0.114225 Jy keep ! Adding 286 model components to the UV plane model. ! The established model now contains 427 components and 0.114225 Jy ![Exited script file: muppet] wmap "J1223+8436_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.286 x 7.332 at 20.78 degrees (North through East) ! Clean map min=-0.0017394 max=0.079901 Jy/beam ! Writing clean map to FITS file: J1223+8436_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0799008 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000205136 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.770214 0.770214 1.54043 3.08086 6.16172 12.3234 24.6469 49.2937 98.5874 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.079 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.286 x 7.332 at 20.78 degrees (North through East) ! Clean map min=-0.0017394 max=0.079901 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1223+8436_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:12:33 2019