! Started logfile: J1223+8436_S_2017_06_10_pus_uvs.log on Mon May 6 14:52:51 2019 obs J1223+8436_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J1223+8436_S_2017_06_10_pus_uva.fits ! AN table 1: 311 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.986209 visibilities/baseline/integration-bin. ! Found source: J1223+8436 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 55208 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1223+8436_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 134 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1693 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.945147Jy sigma=0.008144 ! Fit after self-cal, rms=0.926800Jy sigma=0.007989 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.78 mas, bmaj=3.917 mas, bpa=43.28 degrees ! Estimated noise=818.616 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0560008 Jy ! Component: 100 - total flux cleaned = 0.0729 Jy ! Total flux subtracted in 100 components = 0.0729 Jy ! Clean residual min=-0.003436 max=0.008506 Jy/beam ! Clean residual mean=-0.000021 rms=0.000839 Jy/beam ! Combined flux in latest and established models = 0.0729 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084506Jy sigma=0.000703 ! Fit after self-cal, rms=0.084471Jy sigma=0.000702 ! Inverting map ! Added new window around map position (-0.5, 4.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00906948 Jy ! Component: 100 - total flux cleaned = 0.0138746 Jy ! Total flux subtracted in 100 components = 0.0138746 Jy ! Clean residual min=-0.002625 max=0.004286 Jy/beam ! Clean residual mean=-0.000011 rms=0.000678 Jy/beam ! Combined flux in latest and established models = 0.0867746 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 21 components and 0.0867746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083243Jy sigma=0.000692 ! Fit after self-cal, rms=0.083192Jy sigma=0.000691 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00392308 Jy ! Component: 100 - total flux cleaned = 0.00620391 Jy ! Total flux subtracted in 100 components = 0.00620391 Jy ! Clean residual min=-0.002529 max=0.003795 Jy/beam ! Clean residual mean=-0.000007 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 0.0929785 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 26 components and 0.0929785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082936Jy sigma=0.000689 ! Fit after self-cal, rms=0.082913Jy sigma=0.000689 ! Inverting map ! Added new window around map position (-1, 10.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00341213 Jy ! Component: 100 - total flux cleaned = 0.00538864 Jy ! Total flux subtracted in 100 components = 0.00538864 Jy ! Clean residual min=-0.002423 max=0.002553 Jy/beam ! Clean residual mean=-0.000003 rms=0.000609 Jy/beam ! Combined flux in latest and established models = 0.0983671 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 34 components and 0.0983671 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082739Jy sigma=0.000687 ! Fit after self-cal, rms=0.082714Jy sigma=0.000687 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.553 mas, bmaj=4.86 mas, bpa=42.33 degrees ! Estimated noise=401.738 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, 14). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00266234 Jy ! Component: 100 - total flux cleaned = 0.00409184 Jy ! Component: 150 - total flux cleaned = 0.00486511 Jy ! Component: 200 - total flux cleaned = 0.00526614 Jy ! Total flux subtracted in 200 components = 0.00526614 Jy ! Clean residual min=-0.001306 max=0.001449 Jy/beam ! Clean residual mean=-0.000002 rms=0.000350 Jy/beam ! Combined flux in latest and established models = 0.103633 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 50 components and 0.103633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082624Jy sigma=0.000686 ! Fit after self-cal, rms=0.082613Jy sigma=0.000686 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 0.97 KP 1.05 ! LA 1.02 MK 1.05 NL 0.91 OV 1.00 ! PT 1.02 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.99 HN 1.02 KP 0.98 ! LA 0.99 MK 1.03 NL 1.05 OV 1.14 ! PT 1.00 SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.05 HN 0.99 KP 0.99 ! LA 1.00 MK 1.05 NL 0.98 OV 0.96 ! PT 0.98 SC 1.00 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.01 KP 1.00* ! LA 1.05 MK 0.88 NL 1.00* OV 1.00* ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.082613Jy sigma=0.000686 ! Fit after self-cal, rms=0.082228Jy sigma=0.000685 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.555 mas, bmaj=4.859 mas, bpa=42.2 degrees ! Estimated noise=401.282 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113618 Jy ! Component: 100 - total flux cleaned = 0.00171616 Jy ! Component: 150 - total flux cleaned = 0.00187683 Jy ! Component: 200 - total flux cleaned = 0.00196061 Jy ! Total flux subtracted in 200 components = 0.00196061 Jy ! Clean residual min=-0.001307 max=0.001438 Jy/beam ! Clean residual mean=0.000000 rms=0.000332 Jy/beam ! Combined flux in latest and established models = 0.105594 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 63 components and 0.105594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082208Jy sigma=0.000685 ! Fit after self-cal, rms=0.082209Jy sigma=0.000685 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082209Jy sigma=0.000685 ! Fit after self-cal, rms=0.081569Jy sigma=0.000683 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.549 mas, bmaj=4.841 mas, bpa=42.77 degrees ! Estimated noise=400.706 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000838121 Jy ! Component: 100 - total flux cleaned = 0.00137869 Jy ! Component: 150 - total flux cleaned = 0.00158531 Jy ! Component: 200 - total flux cleaned = 0.00165217 Jy ! Total flux subtracted in 200 components = 0.00165217 Jy ! Clean residual min=-0.001077 max=0.001163 Jy/beam ! Clean residual mean=0.000000 rms=0.000286 Jy/beam ! Combined flux in latest and established models = 0.107246 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 79 components and 0.107246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081557Jy sigma=0.000683 ! Fit after self-cal, rms=0.081561Jy sigma=0.000683 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000198625 Jy ! Component: 100 - total flux cleaned = 0.000248489 Jy ! Component: 150 - total flux cleaned = 0.000278845 Jy ! Component: 200 - total flux cleaned = 0.000292891 Jy ! Total flux subtracted in 200 components = 0.000292891 Jy ! Clean residual min=-0.001084 max=0.001193 Jy/beam ! Clean residual mean=0.000001 rms=0.000287 Jy/beam ! Combined flux in latest and established models = 0.107539 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 84 components and 0.107539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081556Jy sigma=0.000683 ! Fit after self-cal, rms=0.081556Jy sigma=0.000683 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081556Jy sigma=0.000683 ! Fit after self-cal, rms=0.081642Jy sigma=0.000683 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.544 mas, bmaj=4.837 mas, bpa=43.05 degrees ! Estimated noise=401.187 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000588567 Jy ! Component: 100 - total flux cleaned = 0.000925589 Jy ! Component: 150 - total flux cleaned = 0.000982569 Jy ! Component: 200 - total flux cleaned = 0.0010229 Jy ! Total flux subtracted in 200 components = 0.0010229 Jy ! Clean residual min=-0.001067 max=0.001167 Jy/beam ! Clean residual mean=0.000000 rms=0.000283 Jy/beam ! Combined flux in latest and established models = 0.108562 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 89 components and 0.108562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081636Jy sigma=0.000683 ! Fit after self-cal, rms=0.081638Jy sigma=0.000683 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000123007 Jy ! Component: 100 - total flux cleaned = 0.000149434 Jy ! Component: 150 - total flux cleaned = 0.000162174 Jy ! Component: 200 - total flux cleaned = 0.000186281 Jy ! Total flux subtracted in 200 components = 0.000186281 Jy ! Clean residual min=-0.001065 max=0.001175 Jy/beam ! Clean residual mean=0.000001 rms=0.000283 Jy/beam ! Combined flux in latest and established models = 0.108748 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 93 components and 0.108748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081634Jy sigma=0.000683 ! Fit after self-cal, rms=0.081634Jy sigma=0.000683 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081634Jy sigma=0.000683 ! Fit after self-cal, rms=0.081722Jy sigma=0.000683 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.935 mas, bmaj=9.765 mas, bpa=37.14 degrees ! Estimated noise=525.955 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000327398 Jy ! Component: 100 - total flux cleaned = 0.000441806 Jy ! Component: 150 - total flux cleaned = 0.00053053 Jy ! Component: 200 - total flux cleaned = 0.000600289 Jy ! Total flux subtracted in 200 components = 0.000600289 Jy ! Clean residual min=-0.001259 max=0.001237 Jy/beam ! Clean residual mean=-0.000001 rms=0.000356 Jy/beam ! Combined flux in latest and established models = 0.109348 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 103 components and 0.109348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081720Jy sigma=0.000683 ! Fit after self-cal, rms=0.081721Jy sigma=0.000683 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.27994e-05 Jy ! Component: 100 - total flux cleaned = 0.000104463 Jy ! Component: 150 - total flux cleaned = 0.000116724 Jy ! Component: 200 - total flux cleaned = 0.00012249 Jy ! Total flux subtracted in 200 components = 0.00012249 Jy ! Clean residual min=-0.001256 max=0.001227 Jy/beam ! Clean residual mean=-0.000001 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.109471 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 109 components and 0.109471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081721Jy sigma=0.000683 ! Fit after self-cal, rms=0.081721Jy sigma=0.000683 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.539 mas, bmaj=4.834 mas, bpa=43.24 degrees ! Estimated noise=401.673 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.539 x 4.834 at 43.24 degrees (North through East) ! Clean map min=-0.0010433 max=0.071672 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.772 mas, bmaj=3.896 mas, bpa=44.49 degrees ! Estimated noise=812.964 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0551429 Jy ! Component: 100 - total flux cleaned = 0.0744511 Jy ! Component: 150 - total flux cleaned = 0.0841166 Jy ! Component: 200 - total flux cleaned = 0.0899655 Jy ! Total flux subtracted in 200 components = 0.0899655 Jy ! Clean residual min=-0.002618 max=0.003247 Jy/beam ! Clean residual mean=-0.000012 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.0899655 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0899655 Jy ! Inverting map and beam ! Estimated beam: bmin=3.539 mas, bmaj=4.834 mas, bpa=43.24 degrees ! Estimated noise=401.673 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00577277 Jy ! Component: 100 - total flux cleaned = 0.00940935 Jy ! Component: 150 - total flux cleaned = 0.0118992 Jy ! Component: 200 - total flux cleaned = 0.0137696 Jy ! Total flux subtracted in 200 components = 0.0137696 Jy ! Clean residual min=-0.001191 max=0.001257 Jy/beam ! Clean residual mean=-0.000007 rms=0.000318 Jy/beam ! Combined flux in latest and established models = 0.103735 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 52 components and 0.103735 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.935 mas, bmaj=9.765 mas, bpa=37.14 degrees ! Estimated noise=525.955 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00225443 Jy ! Component: 100 - total flux cleaned = 0.0035668 Jy ! Component: 150 - total flux cleaned = 0.00441395 Jy ! Component: 200 - total flux cleaned = 0.00496923 Jy ! Total flux subtracted in 200 components = 0.00496923 Jy ! Clean residual min=-0.001281 max=0.001238 Jy/beam ! Clean residual mean=-0.000003 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.108704 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000222968 Jy ! Component: 100 - total flux cleaned = 0.000324056 Jy ! Component: 150 - total flux cleaned = 0.000398475 Jy ! Component: 200 - total flux cleaned = 0.000461916 Jy ! Total flux subtracted in 200 components = 0.000461916 Jy ! Clean residual min=-0.001272 max=0.001222 Jy/beam ! Clean residual mean=-0.000002 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 0.109166 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 109 components and 0.109166 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.539 mas, bmaj=4.834 mas, bpa=43.24 degrees ! Estimated noise=401.673 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.01614e-05 Jy ! Component: 100 - total flux cleaned = 7.90661e-05 Jy ! Component: 150 - total flux cleaned = 0.000133157 Jy ! Component: 200 - total flux cleaned = 0.000197991 Jy ! Total flux subtracted in 200 components = 0.000197991 Jy ! Clean residual min=-0.001105 max=0.001225 Jy/beam ! Clean residual mean=0.000000 rms=0.000283 Jy/beam ! Combined flux in latest and established models = 0.109364 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 122 components and 0.109364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081724Jy sigma=0.000683 ! Fit after self-cal, rms=0.081722Jy sigma=0.000683 wmodel J1223+8436_S_2017_06_10_pus_map.mod ! Writing 122 model components to file: J1223+8436_S_2017_06_10_pus_map.mod wobs J1223+8436_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J1223+8436_S_2017_06_10_pus_uvs.fits wwins J1223+8436_S_2017_06_10_pus_map.win ! wwins: Wrote 4 windows to J1223+8436_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000177523 Jy ! Component: 100 - total flux cleaned = 0.000313999 Jy ! Component: 150 - total flux cleaned = 0.000447333 Jy ! Component: 200 - total flux cleaned = 0.000614271 Jy ! Component: 250 - total flux cleaned = 0.000795225 Jy ! Component: 300 - total flux cleaned = 0.000901478 Jy ! Component: 350 - total flux cleaned = 0.000988403 Jy ! Component: 400 - total flux cleaned = 0.0010906 Jy ! Component: 450 - total flux cleaned = 0.00114045 Jy ! Component: 500 - total flux cleaned = 0.00114077 Jy ! Component: 550 - total flux cleaned = 0.00119021 Jy ! Component: 600 - total flux cleaned = 0.00128682 Jy ! Component: 650 - total flux cleaned = 0.00130259 Jy ! Component: 700 - total flux cleaned = 0.00133398 Jy ! Component: 750 - total flux cleaned = 0.0013803 Jy ! Component: 800 - total flux cleaned = 0.00142609 Jy ! Component: 850 - total flux cleaned = 0.00142611 Jy ! Component: 900 - total flux cleaned = 0.00150106 Jy ! Component: 950 - total flux cleaned = 0.0015453 Jy ! Component: 1000 - total flux cleaned = 0.00158904 Jy ! Component: 1050 - total flux cleaned = 0.00160345 Jy ! Component: 1100 - total flux cleaned = 0.00166087 Jy ! Component: 1150 - total flux cleaned = 0.00174563 Jy ! Component: 1200 - total flux cleaned = 0.00178755 Jy ! Component: 1250 - total flux cleaned = 0.00182897 Jy ! Component: 1300 - total flux cleaned = 0.00188385 Jy ! Component: 1350 - total flux cleaned = 0.00193815 Jy ! Component: 1400 - total flux cleaned = 0.00197853 Jy ! Component: 1450 - total flux cleaned = 0.00205844 Jy ! Component: 1500 - total flux cleaned = 0.00212456 Jy ! Component: 1550 - total flux cleaned = 0.00219005 Jy ! Component: 1600 - total flux cleaned = 0.00220308 Jy ! Component: 1650 - total flux cleaned = 0.00226767 Jy ! Component: 1700 - total flux cleaned = 0.00235715 Jy ! Component: 1750 - total flux cleaned = 0.00243304 Jy ! Component: 1800 - total flux cleaned = 0.00245827 Jy ! Component: 1850 - total flux cleaned = 0.00253295 Jy ! Component: 1900 - total flux cleaned = 0.00263183 Jy ! Component: 1950 - total flux cleaned = 0.00266866 Jy ! Component: 2000 - total flux cleaned = 0.00275401 Jy ! Component: 2050 - total flux cleaned = 0.00280232 Jy ! Component: 2100 - total flux cleaned = 0.00288622 Jy ! Component: 2150 - total flux cleaned = 0.00293376 Jy ! Component: 2200 - total flux cleaned = 0.00301647 Jy ! Component: 2250 - total flux cleaned = 0.0030399 Jy ! Component: 2300 - total flux cleaned = 0.0030399 Jy ! Component: 2350 - total flux cleaned = 0.00312091 Jy ! Component: 2400 - total flux cleaned = 0.00310952 Jy ! Component: 2450 - total flux cleaned = 0.00321234 Jy ! Component: 2500 - total flux cleaned = 0.00323513 Jy ! Component: 2550 - total flux cleaned = 0.00329127 Jy ! Component: 2600 - total flux cleaned = 0.00330237 Jy ! Component: 2650 - total flux cleaned = 0.00331353 Jy ! Component: 2700 - total flux cleaned = 0.00335754 Jy ! Component: 2750 - total flux cleaned = 0.0034016 Jy ! Component: 2800 - total flux cleaned = 0.00343424 Jy ! Component: 2850 - total flux cleaned = 0.00353182 Jy ! Component: 2900 - total flux cleaned = 0.00356413 Jy ! Component: 2950 - total flux cleaned = 0.0036497 Jy ! Component: 3000 - total flux cleaned = 0.00363911 Jy ! Component: 3050 - total flux cleaned = 0.00366023 Jy ! Component: 3100 - total flux cleaned = 0.00370227 Jy ! Component: 3150 - total flux cleaned = 0.00374399 Jy ! Component: 3200 - total flux cleaned = 0.00374397 Jy ! Component: 3250 - total flux cleaned = 0.00375423 Jy ! Component: 3300 - total flux cleaned = 0.00371309 Jy ! Component: 3350 - total flux cleaned = 0.00378473 Jy ! Component: 3400 - total flux cleaned = 0.0038051 Jy ! Component: 3450 - total flux cleaned = 0.00379503 Jy ! Component: 3500 - total flux cleaned = 0.00382521 Jy ! Component: 3550 - total flux cleaned = 0.00381524 Jy ! Component: 3600 - total flux cleaned = 0.00385502 Jy ! Component: 3650 - total flux cleaned = 0.00383527 Jy ! Component: 3700 - total flux cleaned = 0.00381562 Jy ! Component: 3750 - total flux cleaned = 0.00384512 Jy ! Component: 3800 - total flux cleaned = 0.00387438 Jy ! Component: 3850 - total flux cleaned = 0.00387437 Jy ! Component: 3900 - total flux cleaned = 0.00391309 Jy ! Component: 3950 - total flux cleaned = 0.00394192 Jy ! Component: 4000 - total flux cleaned = 0.00390361 Jy ! Component: 4050 - total flux cleaned = 0.00391316 Jy ! Total flux subtracted in 4096 components = 0.00393207 Jy ! Clean residual min=-0.000592 max=0.000518 Jy/beam ! Clean residual mean=-0.000000 rms=0.000170 Jy/beam ! Combined flux in latest and established models = 0.113296 Jy keep ! Adding 302 model components to the UV plane model. ! The established model now contains 424 components and 0.113296 Jy ![Exited script file: muppet] wmap "J1223+8436_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.539 x 4.834 at 43.24 degrees (North through East) ! Clean map min=-0.00085213 max=0.071908 Jy/beam ! Writing clean map to FITS file: J1223+8436_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0719077 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000170295 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.710473 0.710473 1.42095 2.84189 5.68378 11.3676 22.7351 45.4702 90.9405 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.071 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.539 x 4.834 at 43.24 degrees (North through East) ! Clean map min=-0.00085213 max=0.071908 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1223+8436_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:52:58 2019