! Started logfile: J1222+0413_S_2017_10_21_pus_uvs.log on Sat May 11 20:58:05 2019 obs J1222+0413_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1222+0413_S_2017_10_21_pus_uva.fits ! AN table 1: 20 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.868056 visibilities/baseline/integration-bin. ! Found source: J1222+0413 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 2500 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1222+0413_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.684763Jy sigma=0.006817 ! Fit after self-cal, rms=0.676536Jy sigma=0.006736 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.047 mas, bmaj=14.05 mas, bpa=-17.75 degrees ! Estimated noise=1960.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.245981 Jy ! Component: 100 - total flux cleaned = 0.306682 Jy ! Total flux subtracted in 100 components = 0.306682 Jy ! Clean residual min=-0.015982 max=0.025717 Jy/beam ! Clean residual mean=0.000072 rms=0.004832 Jy/beam ! Combined flux in latest and established models = 0.306682 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.306682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112133Jy sigma=0.001000 ! Fit after self-cal, rms=0.112140Jy sigma=0.001000 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.617 mas, bmaj=15.33 mas, bpa=-17.87 degrees ! Estimated noise=1677.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0319326 Jy ! Component: 100 - total flux cleaned = 0.0487653 Jy ! Component: 150 - total flux cleaned = 0.059727 Jy ! Component: 200 - total flux cleaned = 0.0671105 Jy ! Total flux subtracted in 200 components = 0.0671105 Jy ! Clean residual min=-0.011868 max=0.014204 Jy/beam ! Clean residual mean=0.000063 rms=0.003480 Jy/beam ! Combined flux in latest and established models = 0.373793 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 64 components and 0.373793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101471Jy sigma=0.000907 ! Fit after self-cal, rms=0.101479Jy sigma=0.000907 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.89 HN 1.03 KP 1.09 ! LA 1.01 MK 1.00 NL 0.92 OV 0.94 ! PT 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 0.97 KP 1.05 ! LA 0.96 MK 0.95 NL 1.05 OV 0.99 ! PT 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 0.97 HN 0.94 KP 1.05 ! LA 0.74 MK 0.98 NL 1.27 OV 0.93 ! PT 0.98 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 0.94 KP 1.00* ! LA 0.88 MK 1.51 NL 1.00* OV 1.00* ! PT 1.04 ! ! ! Fit before self-cal, rms=0.101479Jy sigma=0.000907 ! Fit after self-cal, rms=0.093553Jy sigma=0.000804 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.645 mas, bmaj=15.7 mas, bpa=-17.81 degrees ! Estimated noise=1683.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00428297 Jy ! Component: 100 - total flux cleaned = -0.0048244 Jy ! Component: 150 - total flux cleaned = -0.00518572 Jy ! Component: 200 - total flux cleaned = -0.00540073 Jy ! Total flux subtracted in 200 components = -0.00540073 Jy ! Clean residual min=-0.010104 max=0.012411 Jy/beam ! Clean residual mean=-0.000005 rms=0.002491 Jy/beam ! Combined flux in latest and established models = 0.368392 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 80 components and 0.368392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093052Jy sigma=0.000801 ! Fit after self-cal, rms=0.093072Jy sigma=0.000800 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093072Jy sigma=0.000800 ! Fit after self-cal, rms=0.085124Jy sigma=0.000726 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.667 mas, bmaj=15.93 mas, bpa=-17.9 degrees ! Estimated noise=1680.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00209249 Jy ! Component: 100 - total flux cleaned = -0.00244959 Jy ! Component: 150 - total flux cleaned = -0.00269754 Jy ! Component: 200 - total flux cleaned = -0.00280574 Jy ! Total flux subtracted in 200 components = -0.00280574 Jy ! Clean residual min=-0.004077 max=0.004289 Jy/beam ! Clean residual mean=0.000005 rms=0.001151 Jy/beam ! Combined flux in latest and established models = 0.365586 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 94 components and 0.365586 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084978Jy sigma=0.000725 ! Fit after self-cal, rms=0.085080Jy sigma=0.000725 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000136651 Jy ! Component: 100 - total flux cleaned = 2.74061e-06 Jy ! Component: 150 - total flux cleaned = -3.63579e-05 Jy ! Component: 200 - total flux cleaned = -7.25534e-05 Jy ! Total flux subtracted in 200 components = -7.25534e-05 Jy ! Clean residual min=-0.004021 max=0.004276 Jy/beam ! Clean residual mean=0.000006 rms=0.001143 Jy/beam ! Combined flux in latest and established models = 0.365514 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 100 components and 0.365514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085021Jy sigma=0.000725 ! Fit after self-cal, rms=0.085025Jy sigma=0.000725 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085025Jy sigma=0.000725 ! Fit after self-cal, rms=0.085393Jy sigma=0.000724 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.674 mas, bmaj=15.97 mas, bpa=-17.9 degrees ! Estimated noise=1679.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00157999 Jy ! Component: 100 - total flux cleaned = -0.00195077 Jy ! Component: 150 - total flux cleaned = -0.0021078 Jy ! Component: 200 - total flux cleaned = -0.00217929 Jy ! Total flux subtracted in 200 components = -0.00217929 Jy ! Clean residual min=-0.003882 max=0.004260 Jy/beam ! Clean residual mean=0.000006 rms=0.001120 Jy/beam ! Combined flux in latest and established models = 0.363335 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 108 components and 0.363335 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085326Jy sigma=0.000724 ! Fit after self-cal, rms=0.085335Jy sigma=0.000724 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.3106e-05 Jy ! Component: 100 - total flux cleaned = 8.33907e-05 Jy ! Component: 150 - total flux cleaned = 5.33294e-05 Jy ! Component: 200 - total flux cleaned = 5.39858e-05 Jy ! Total flux subtracted in 200 components = 5.39858e-05 Jy ! Clean residual min=-0.003838 max=0.004303 Jy/beam ! Clean residual mean=0.000006 rms=0.001116 Jy/beam ! Combined flux in latest and established models = 0.363389 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 116 components and 0.363389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085301Jy sigma=0.000724 ! Fit after self-cal, rms=0.085303Jy sigma=0.000724 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085303Jy sigma=0.000724 ! Fit after self-cal, rms=0.085547Jy sigma=0.000724 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.737 mas, bmaj=15.99 mas, bpa=-16.26 degrees ! Estimated noise=1939.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00130982 Jy ! Component: 100 - total flux cleaned = -0.00177962 Jy ! Component: 150 - total flux cleaned = -0.00185478 Jy ! Component: 200 - total flux cleaned = -0.00183173 Jy ! Total flux subtracted in 200 components = -0.00183173 Jy ! Clean residual min=-0.004553 max=0.005000 Jy/beam ! Clean residual mean=0.000013 rms=0.001373 Jy/beam ! Combined flux in latest and established models = 0.361557 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 124 components and 0.361557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085515Jy sigma=0.000724 ! Fit after self-cal, rms=0.085515Jy sigma=0.000724 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.28423e-06 Jy ! Component: 100 - total flux cleaned = 1.80212e-05 Jy ! Component: 150 - total flux cleaned = 3.9345e-05 Jy ! Component: 200 - total flux cleaned = 6.01275e-05 Jy ! Total flux subtracted in 200 components = 6.01275e-05 Jy ! Clean residual min=-0.004517 max=0.004999 Jy/beam ! Clean residual mean=0.000013 rms=0.001371 Jy/beam ! Combined flux in latest and established models = 0.361617 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 130 components and 0.361617 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085503Jy sigma=0.000724 ! Fit after self-cal, rms=0.085502Jy sigma=0.000724 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.678 mas, bmaj=16 mas, bpa=-17.9 degrees ! Estimated noise=1679.06 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.678 x 16 at -17.9 degrees (North through East) ! Clean map min=-0.0037127 max=0.32462 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.075 mas, bmaj=14.91 mas, bpa=-17.82 degrees ! Estimated noise=2010.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.251734 Jy ! Component: 100 - total flux cleaned = 0.308092 Jy ! Component: 150 - total flux cleaned = 0.32802 Jy ! Component: 200 - total flux cleaned = 0.338365 Jy ! Total flux subtracted in 200 components = 0.338365 Jy ! Clean residual min=-0.006254 max=0.006457 Jy/beam ! Clean residual mean=0.000022 rms=0.001513 Jy/beam ! Combined flux in latest and established models = 0.338365 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.338365 Jy ! Inverting map and beam ! Estimated beam: bmin=3.678 mas, bmaj=16 mas, bpa=-17.9 degrees ! Estimated noise=1679.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00844033 Jy ! Component: 100 - total flux cleaned = 0.013657 Jy ! Component: 150 - total flux cleaned = 0.0172415 Jy ! Component: 200 - total flux cleaned = 0.0197639 Jy ! Total flux subtracted in 200 components = 0.0197639 Jy ! Clean residual min=-0.004235 max=0.004263 Jy/beam ! Clean residual mean=0.000013 rms=0.001135 Jy/beam ! Combined flux in latest and established models = 0.358129 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 74 components and 0.358129 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.737 mas, bmaj=15.99 mas, bpa=-16.26 degrees ! Estimated noise=1939.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00197848 Jy ! Component: 100 - total flux cleaned = 0.00291895 Jy ! Component: 150 - total flux cleaned = 0.00306983 Jy ! Component: 200 - total flux cleaned = 0.00322942 Jy ! Total flux subtracted in 200 components = 0.00322942 Jy ! Clean residual min=-0.004104 max=0.005100 Jy/beam ! Clean residual mean=0.000014 rms=0.001371 Jy/beam ! Combined flux in latest and established models = 0.361358 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.58017e-05 Jy ! Component: 100 - total flux cleaned = 0.000161253 Jy ! Component: 150 - total flux cleaned = 0.000222432 Jy ! Component: 200 - total flux cleaned = 0.000297399 Jy ! Total flux subtracted in 200 components = 0.000297399 Jy ! Clean residual min=-0.004119 max=0.005143 Jy/beam ! Clean residual mean=0.000013 rms=0.001367 Jy/beam ! Combined flux in latest and established models = 0.361655 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 95 components and 0.361656 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.678 mas, bmaj=16 mas, bpa=-17.9 degrees ! Estimated noise=1679.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000426819 Jy ! Component: 100 - total flux cleaned = -0.000312388 Jy ! Component: 150 - total flux cleaned = -0.000160487 Jy ! Component: 200 - total flux cleaned = -7.19718e-05 Jy ! Total flux subtracted in 200 components = -7.19718e-05 Jy ! Clean residual min=-0.003894 max=0.004493 Jy/beam ! Clean residual mean=0.000007 rms=0.001109 Jy/beam ! Combined flux in latest and established models = 0.361584 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 109 components and 0.361584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085579Jy sigma=0.000724 ! Fit after self-cal, rms=0.085535Jy sigma=0.000724 wmodel J1222+0413_S_2017_10_21_pus_map.mod ! Writing 109 model components to file: J1222+0413_S_2017_10_21_pus_map.mod wobs J1222+0413_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1222+0413_S_2017_10_21_pus_uvs.fits wwins J1222+0413_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J1222+0413_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00084022 Jy ! Component: 100 - total flux cleaned = 0.000841127 Jy ! Component: 150 - total flux cleaned = 0.000584014 Jy ! Component: 200 - total flux cleaned = 0.000153209 Jy ! Component: 250 - total flux cleaned = -0.000262212 Jy ! Component: 300 - total flux cleaned = -0.00037728 Jy ! Component: 350 - total flux cleaned = -0.000433933 Jy ! Component: 400 - total flux cleaned = -0.000597028 Jy ! Component: 450 - total flux cleaned = -0.000808703 Jy ! Component: 500 - total flux cleaned = -0.000756573 Jy ! Component: 550 - total flux cleaned = -0.000807719 Jy ! Component: 600 - total flux cleaned = -0.00100654 Jy ! Component: 650 - total flux cleaned = -0.00095627 Jy ! Component: 700 - total flux cleaned = -0.00100251 Jy ! Component: 750 - total flux cleaned = -0.000769252 Jy ! Component: 800 - total flux cleaned = -0.000814654 Jy ! Component: 850 - total flux cleaned = -0.000636242 Jy ! Component: 900 - total flux cleaned = -0.000637463 Jy ! Component: 950 - total flux cleaned = -0.00068064 Jy ! Component: 1000 - total flux cleaned = -0.000552552 Jy ! Component: 1050 - total flux cleaned = -0.000719559 Jy ! Component: 1100 - total flux cleaned = -0.000801333 Jy ! Component: 1150 - total flux cleaned = -0.000802186 Jy ! Component: 1200 - total flux cleaned = -0.00100282 Jy ! Component: 1250 - total flux cleaned = -0.001161 Jy ! Component: 1300 - total flux cleaned = -0.0011998 Jy ! Component: 1350 - total flux cleaned = -0.00139327 Jy ! Component: 1400 - total flux cleaned = -0.00162136 Jy ! Component: 1450 - total flux cleaned = -0.00177141 Jy ! Component: 1500 - total flux cleaned = -0.00206875 Jy ! Component: 1550 - total flux cleaned = -0.00232527 Jy ! Component: 1600 - total flux cleaned = -0.00254327 Jy ! Component: 1650 - total flux cleaned = -0.00283078 Jy ! Component: 1700 - total flux cleaned = -0.00315049 Jy ! Component: 1750 - total flux cleaned = -0.0034668 Jy ! Component: 1800 - total flux cleaned = -0.00374435 Jy ! Component: 1850 - total flux cleaned = -0.00398511 Jy ! Component: 1900 - total flux cleaned = -0.0041893 Jy ! Component: 1950 - total flux cleaned = -0.00442448 Jy ! Component: 2000 - total flux cleaned = -0.00462399 Jy ! Component: 2050 - total flux cleaned = -0.0048871 Jy ! Component: 2100 - total flux cleaned = -0.0050827 Jy ! Component: 2150 - total flux cleaned = -0.00517954 Jy ! Component: 2200 - total flux cleaned = -0.00543466 Jy ! Component: 2250 - total flux cleaned = -0.00562427 Jy ! Component: 2300 - total flux cleaned = -0.00571825 Jy ! Component: 2350 - total flux cleaned = -0.00599673 Jy ! Component: 2400 - total flux cleaned = -0.00602707 Jy ! Component: 2450 - total flux cleaned = -0.00617923 Jy ! Component: 2500 - total flux cleaned = -0.00641983 Jy ! Component: 2550 - total flux cleaned = -0.00650898 Jy ! Component: 2600 - total flux cleaned = -0.00668639 Jy ! Component: 2650 - total flux cleaned = -0.0068622 Jy ! Component: 2700 - total flux cleaned = -0.00700677 Jy ! Component: 2750 - total flux cleaned = -0.00720781 Jy ! Component: 2800 - total flux cleaned = -0.00729309 Jy ! Component: 2850 - total flux cleaned = -0.00743435 Jy ! Component: 2900 - total flux cleaned = -0.00751826 Jy ! Component: 2950 - total flux cleaned = -0.00751778 Jy ! Component: 3000 - total flux cleaned = -0.00754513 Jy ! Component: 3050 - total flux cleaned = -0.00770907 Jy ! Component: 3100 - total flux cleaned = -0.00768195 Jy ! Component: 3150 - total flux cleaned = -0.00776324 Jy ! Component: 3200 - total flux cleaned = -0.00792353 Jy ! Component: 3250 - total flux cleaned = -0.00795006 Jy ! Component: 3300 - total flux cleaned = -0.00810783 Jy ! Component: 3350 - total flux cleaned = -0.00808188 Jy ! Component: 3400 - total flux cleaned = -0.00810768 Jy ! Component: 3450 - total flux cleaned = -0.00815918 Jy ! Component: 3500 - total flux cleaned = -0.00833813 Jy ! Component: 3550 - total flux cleaned = -0.00836367 Jy ! Component: 3600 - total flux cleaned = -0.00851443 Jy ! Component: 3650 - total flux cleaned = -0.0085893 Jy ! Component: 3700 - total flux cleaned = -0.00866395 Jy ! Component: 3750 - total flux cleaned = -0.00876263 Jy ! Component: 3800 - total flux cleaned = -0.0088361 Jy ! Component: 3850 - total flux cleaned = -0.00888478 Jy ! Component: 3900 - total flux cleaned = -0.00898134 Jy ! Component: 3950 - total flux cleaned = -0.00905368 Jy ! Component: 4000 - total flux cleaned = -0.00919668 Jy ! Component: 4050 - total flux cleaned = -0.00929135 Jy ! Total flux subtracted in 4096 components = -0.00924406 Jy ! Clean residual min=-0.001546 max=0.001392 Jy/beam ! Clean residual mean=0.000005 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.352339 Jy keep ! Adding 265 model components to the UV plane model. ! The established model now contains 374 components and 0.352339 Jy ![Exited script file: muppet] wmap "J1222+0413_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.678 x 16 at -17.9 degrees (North through East) ! Clean map min=-0.0031272 max=0.3257 Jy/beam ! Writing clean map to FITS file: J1222+0413_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.325698 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00044244 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.407531 0.407531 0.815061 1.63012 3.26025 6.52049 13.041 26.082 52.1639 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.325 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.678 x 16 at -17.9 degrees (North through East) ! Clean map min=-0.0031272 max=0.3257 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1222+0413_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:58:10 2019