! Started logfile: J1222+0413_S_2017_10_09_pus_uvs.log on Sun May 12 13:12:22 2019 obs J1222+0413_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1222+0413_S_2017_10_09_pus_uva.fits ! AN table 1: 20 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.563889 visibilities/baseline/integration-bin. ! Found source: J1222+0413 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 1624 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1222+0413_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 129 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.667398Jy sigma=0.005599 ! Fit after self-cal, rms=0.654008Jy sigma=0.005495 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.119 mas, bmaj=12.64 mas, bpa=-18.27 degrees ! Estimated noise=2863.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.267267 Jy ! Component: 100 - total flux cleaned = 0.327201 Jy ! Total flux subtracted in 100 components = 0.327201 Jy ! Clean residual min=-0.011687 max=0.020734 Jy/beam ! Clean residual mean=0.000103 rms=0.003833 Jy/beam ! Combined flux in latest and established models = 0.327201 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.327201 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104111Jy sigma=0.000769 ! Fit after self-cal, rms=0.104094Jy sigma=0.000769 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.661 mas, bmaj=13.95 mas, bpa=-18.61 degrees ! Estimated noise=2482.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.024201 Jy ! Component: 100 - total flux cleaned = 0.0364639 Jy ! Component: 150 - total flux cleaned = 0.0441506 Jy ! Component: 200 - total flux cleaned = 0.0491872 Jy ! Total flux subtracted in 200 components = 0.0491872 Jy ! Clean residual min=-0.010801 max=0.009341 Jy/beam ! Clean residual mean=0.000037 rms=0.002437 Jy/beam ! Combined flux in latest and established models = 0.376388 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 50 components and 0.376388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097095Jy sigma=0.000727 ! Fit after self-cal, rms=0.097044Jy sigma=0.000727 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.99 HN 1.01 KP 1.09 ! LA 1.00 MK 0.99 NL 0.92 OV 1.00* ! PT 1.01 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.06 HN 1.05 KP 1.04 ! LA 0.99 MK 0.99 NL 0.84 OV 1.00* ! PT 0.98 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.05 HN 1.01 KP 0.91 ! LA 0.79 MK 1.02 NL 1.20 OV 1.00* ! PT 1.00 ! ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.11 HN 1.05 KP 1.00* ! LA 1.00* MK 1.18 NL 1.00* OV 1.00* ! PT 0.97 ! ! ! Fit before self-cal, rms=0.097044Jy sigma=0.000727 ! Fit after self-cal, rms=0.083414Jy sigma=0.000661 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.682 mas, bmaj=13.84 mas, bpa=-18.66 degrees ! Estimated noise=2507.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000641357 Jy ! Component: 100 - total flux cleaned = -0.00126425 Jy ! Component: 150 - total flux cleaned = -0.00155265 Jy ! Component: 200 - total flux cleaned = -0.00171208 Jy ! Total flux subtracted in 200 components = -0.00171208 Jy ! Clean residual min=-0.006655 max=0.005502 Jy/beam ! Clean residual mean=-0.000002 rms=0.001455 Jy/beam ! Combined flux in latest and established models = 0.374676 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 61 components and 0.374676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083336Jy sigma=0.000660 ! Fit after self-cal, rms=0.083310Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083310Jy sigma=0.000660 ! Fit after self-cal, rms=0.082299Jy sigma=0.000652 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.687 mas, bmaj=13.84 mas, bpa=-18.65 degrees ! Estimated noise=2504.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000635798 Jy ! Component: 100 - total flux cleaned = -0.000806967 Jy ! Component: 150 - total flux cleaned = -0.000808679 Jy ! Component: 200 - total flux cleaned = -0.000776083 Jy ! Total flux subtracted in 200 components = -0.000776083 Jy ! Clean residual min=-0.006978 max=0.005163 Jy/beam ! Clean residual mean=0.000004 rms=0.001374 Jy/beam ! Combined flux in latest and established models = 0.3739 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 70 components and 0.3739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082261Jy sigma=0.000652 ! Fit after self-cal, rms=0.082262Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.08935e-05 Jy ! Component: 100 - total flux cleaned = -4.24824e-05 Jy ! Component: 150 - total flux cleaned = -1.60741e-05 Jy ! Component: 200 - total flux cleaned = 3.29437e-05 Jy ! Total flux subtracted in 200 components = 3.29437e-05 Jy ! Clean residual min=-0.006999 max=0.005183 Jy/beam ! Clean residual mean=0.000004 rms=0.001368 Jy/beam ! Combined flux in latest and established models = 0.373933 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 74 components and 0.373933 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082245Jy sigma=0.000652 ! Fit after self-cal, rms=0.082241Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082241Jy sigma=0.000652 ! Fit after self-cal, rms=0.082226Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.686 mas, bmaj=13.85 mas, bpa=-18.65 degrees ! Estimated noise=2503.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000802413 Jy ! Component: 100 - total flux cleaned = -0.00083144 Jy ! Component: 150 - total flux cleaned = -0.000831256 Jy ! Component: 200 - total flux cleaned = -0.000830868 Jy ! Total flux subtracted in 200 components = -0.000830868 Jy ! Clean residual min=-0.006867 max=0.005107 Jy/beam ! Clean residual mean=0.000004 rms=0.001355 Jy/beam ! Combined flux in latest and established models = 0.373102 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 77 components and 0.373102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082205Jy sigma=0.000651 ! Fit after self-cal, rms=0.082204Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.27392e-05 Jy ! Component: 100 - total flux cleaned = -3.08404e-05 Jy ! Component: 150 - total flux cleaned = -3.15269e-05 Jy ! Component: 200 - total flux cleaned = -3.19587e-05 Jy ! Total flux subtracted in 200 components = -3.19587e-05 Jy ! Clean residual min=-0.006890 max=0.005131 Jy/beam ! Clean residual mean=0.000004 rms=0.001352 Jy/beam ! Combined flux in latest and established models = 0.37307 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 78 components and 0.37307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082194Jy sigma=0.000651 ! Fit after self-cal, rms=0.082192Jy sigma=0.000651 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082192Jy sigma=0.000651 ! Fit after self-cal, rms=0.082185Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.26 mas, bmaj=14.43 mas, bpa=-20.46 degrees ! Estimated noise=2940.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000917068 Jy ! Component: 100 - total flux cleaned = -0.000964758 Jy ! Component: 150 - total flux cleaned = -0.000944936 Jy ! Component: 200 - total flux cleaned = -0.000964367 Jy ! Total flux subtracted in 200 components = -0.000964367 Jy ! Clean residual min=-0.007310 max=0.005463 Jy/beam ! Clean residual mean=0.000006 rms=0.001624 Jy/beam ! Combined flux in latest and established models = 0.372105 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 84 components and 0.372105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082177Jy sigma=0.000651 ! Fit after self-cal, rms=0.082182Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000188841 Jy ! Component: 100 - total flux cleaned = -0.000127492 Jy ! Component: 150 - total flux cleaned = -5.48849e-05 Jy ! Component: 200 - total flux cleaned = -5.66451e-06 Jy ! Total flux subtracted in 200 components = -5.66451e-06 Jy ! Clean residual min=-0.007300 max=0.005467 Jy/beam ! Clean residual mean=0.000006 rms=0.001623 Jy/beam ! Combined flux in latest and established models = 0.3721 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 89 components and 0.3721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082182Jy sigma=0.000651 ! Fit after self-cal, rms=0.082185Jy sigma=0.000651 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.686 mas, bmaj=13.85 mas, bpa=-18.66 degrees ! Estimated noise=2501.58 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.686 x 13.85 at -18.66 degrees (North through East) ! Clean map min=-0.0065713 max=0.34451 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.165 mas, bmaj=12.48 mas, bpa=-18.3 degrees ! Estimated noise=2928.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.267522 Jy ! Component: 100 - total flux cleaned = 0.326501 Jy ! Component: 150 - total flux cleaned = 0.345877 Jy ! Component: 200 - total flux cleaned = 0.355384 Jy ! Total flux subtracted in 200 components = 0.355384 Jy ! Clean residual min=-0.007275 max=0.006326 Jy/beam ! Clean residual mean=0.000021 rms=0.001716 Jy/beam ! Combined flux in latest and established models = 0.355384 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.355384 Jy ! Inverting map and beam ! Estimated beam: bmin=3.686 mas, bmaj=13.85 mas, bpa=-18.66 degrees ! Estimated noise=2501.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00700877 Jy ! Component: 100 - total flux cleaned = 0.0111572 Jy ! Component: 150 - total flux cleaned = 0.0134527 Jy ! Component: 200 - total flux cleaned = 0.0143152 Jy ! Total flux subtracted in 200 components = 0.0143152 Jy ! Clean residual min=-0.006539 max=0.005073 Jy/beam ! Clean residual mean=0.000008 rms=0.001412 Jy/beam ! Combined flux in latest and established models = 0.369699 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 44 components and 0.369699 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.26 mas, bmaj=14.43 mas, bpa=-20.46 degrees ! Estimated noise=2940.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125158 Jy ! Component: 100 - total flux cleaned = 0.00142153 Jy ! Component: 150 - total flux cleaned = 0.0015683 Jy ! Component: 200 - total flux cleaned = 0.0016558 Jy ! Total flux subtracted in 200 components = 0.0016558 Jy ! Clean residual min=-0.007078 max=0.005815 Jy/beam ! Clean residual mean=0.000008 rms=0.001667 Jy/beam ! Combined flux in latest and established models = 0.371355 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.03412e-05 Jy ! Component: 100 - total flux cleaned = 0.000153832 Jy ! Component: 150 - total flux cleaned = 0.000222228 Jy ! Component: 200 - total flux cleaned = 0.000285436 Jy ! Total flux subtracted in 200 components = 0.000285436 Jy ! Clean residual min=-0.007083 max=0.005715 Jy/beam ! Clean residual mean=0.000008 rms=0.001647 Jy/beam ! Combined flux in latest and established models = 0.37164 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 66 components and 0.37164 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.686 mas, bmaj=13.85 mas, bpa=-18.66 degrees ! Estimated noise=2501.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.13928e-05 Jy ! Component: 100 - total flux cleaned = 1.62042e-05 Jy ! Component: 150 - total flux cleaned = 9.16113e-05 Jy ! Component: 200 - total flux cleaned = 2.74308e-05 Jy ! Total flux subtracted in 200 components = 2.74308e-05 Jy ! Clean residual min=-0.006653 max=0.005086 Jy/beam ! Clean residual mean=0.000004 rms=0.001355 Jy/beam ! Combined flux in latest and established models = 0.371667 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 76 components and 0.371667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082179Jy sigma=0.000651 ! Fit after self-cal, rms=0.082183Jy sigma=0.000651 wmodel J1222+0413_S_2017_10_09_pus_map.mod ! Writing 76 model components to file: J1222+0413_S_2017_10_09_pus_map.mod wobs J1222+0413_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1222+0413_S_2017_10_09_pus_uvs.fits wwins J1222+0413_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J1222+0413_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00263267 Jy ! Component: 100 - total flux cleaned = -0.00326612 Jy ! Component: 150 - total flux cleaned = -0.00326735 Jy ! Component: 200 - total flux cleaned = -0.00348771 Jy ! Component: 250 - total flux cleaned = -0.00396551 Jy ! Component: 300 - total flux cleaned = -0.00428673 Jy ! Component: 350 - total flux cleaned = -0.00447053 Jy ! Component: 400 - total flux cleaned = -0.00488253 Jy ! Component: 450 - total flux cleaned = -0.00522102 Jy ! Component: 500 - total flux cleaned = -0.00559904 Jy ! Component: 550 - total flux cleaned = -0.0059629 Jy ! Component: 600 - total flux cleaned = -0.0063139 Jy ! Component: 650 - total flux cleaned = -0.00660325 Jy ! Component: 700 - total flux cleaned = -0.00683773 Jy ! Component: 750 - total flux cleaned = -0.00693051 Jy ! Component: 800 - total flux cleaned = -0.00715073 Jy ! Component: 850 - total flux cleaned = -0.00715079 Jy ! Component: 900 - total flux cleaned = -0.00727628 Jy ! Component: 950 - total flux cleaned = -0.00727618 Jy ! Component: 1000 - total flux cleaned = -0.00735573 Jy ! Component: 1050 - total flux cleaned = -0.00743465 Jy ! Component: 1100 - total flux cleaned = -0.00766416 Jy ! Component: 1150 - total flux cleaned = -0.00784982 Jy ! Component: 1200 - total flux cleaned = -0.00792287 Jy ! Component: 1250 - total flux cleaned = -0.0081022 Jy ! Component: 1300 - total flux cleaned = -0.00817262 Jy ! Component: 1350 - total flux cleaned = -0.00841475 Jy ! Component: 1400 - total flux cleaned = -0.00858467 Jy ! Component: 1450 - total flux cleaned = -0.00875214 Jy ! Component: 1500 - total flux cleaned = -0.00885098 Jy ! Component: 1550 - total flux cleaned = -0.009013 Jy ! Component: 1600 - total flux cleaned = -0.00917173 Jy ! Component: 1650 - total flux cleaned = -0.00923385 Jy ! Component: 1700 - total flux cleaned = -0.00932562 Jy ! Component: 1750 - total flux cleaned = -0.00941595 Jy ! Component: 1800 - total flux cleaned = -0.00950432 Jy ! Component: 1850 - total flux cleaned = -0.00950374 Jy ! Component: 1900 - total flux cleaned = -0.00956081 Jy ! Component: 1950 - total flux cleaned = -0.00950401 Jy ! Component: 2000 - total flux cleaned = -0.00953248 Jy ! Component: 2050 - total flux cleaned = -0.00958763 Jy ! Component: 2100 - total flux cleaned = -0.00953341 Jy ! Component: 2150 - total flux cleaned = -0.00966791 Jy ! Component: 2200 - total flux cleaned = -0.0096941 Jy ! Component: 2250 - total flux cleaned = -0.00966769 Jy ! Component: 2300 - total flux cleaned = -0.00977199 Jy ! Component: 2350 - total flux cleaned = -0.00979755 Jy ! Component: 2400 - total flux cleaned = -0.00982279 Jy ! Component: 2450 - total flux cleaned = -0.00987331 Jy ! Component: 2500 - total flux cleaned = -0.00997322 Jy ! Component: 2550 - total flux cleaned = -0.00997335 Jy ! Component: 2600 - total flux cleaned = -0.010096 Jy ! Component: 2650 - total flux cleaned = -0.010023 Jy ! Component: 2700 - total flux cleaned = -0.00999896 Jy ! Component: 2750 - total flux cleaned = -0.0100469 Jy ! Component: 2800 - total flux cleaned = -0.00999931 Jy ! Component: 2850 - total flux cleaned = -0.00995214 Jy ! Component: 2900 - total flux cleaned = -0.00985885 Jy ! Component: 2950 - total flux cleaned = -0.00983582 Jy ! Component: 3000 - total flux cleaned = -0.00978979 Jy ! Component: 3050 - total flux cleaned = -0.00974392 Jy ! Component: 3100 - total flux cleaned = -0.00972118 Jy ! Component: 3150 - total flux cleaned = -0.00972112 Jy ! Component: 3200 - total flux cleaned = -0.0096542 Jy ! Component: 3250 - total flux cleaned = -0.00956592 Jy ! Component: 3300 - total flux cleaned = -0.00965382 Jy ! Component: 3350 - total flux cleaned = -0.00967577 Jy ! Component: 3400 - total flux cleaned = -0.00965457 Jy ! Component: 3450 - total flux cleaned = -0.00976188 Jy ! Component: 3500 - total flux cleaned = -0.00976212 Jy ! Component: 3550 - total flux cleaned = -0.00978324 Jy ! Component: 3600 - total flux cleaned = -0.00980437 Jy ! Component: 3650 - total flux cleaned = -0.00980445 Jy ! Component: 3700 - total flux cleaned = -0.00980461 Jy ! Component: 3750 - total flux cleaned = -0.0098666 Jy ! Component: 3800 - total flux cleaned = -0.00978453 Jy ! Component: 3850 - total flux cleaned = -0.0098459 Jy ! Component: 3900 - total flux cleaned = -0.00986602 Jy ! Component: 3950 - total flux cleaned = -0.00980557 Jy ! Component: 4000 - total flux cleaned = -0.00980549 Jy ! Component: 4050 - total flux cleaned = -0.00980526 Jy ! Total flux subtracted in 4096 components = -0.00980525 Jy ! Clean residual min=-0.001314 max=0.001207 Jy/beam ! Clean residual mean=0.000004 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.361862 Jy keep ! Adding 274 model components to the UV plane model. ! The established model now contains 350 components and 0.361862 Jy ![Exited script file: muppet] wmap "J1222+0413_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.686 x 13.85 at -18.66 degrees (North through East) ! Clean map min=-0.0033914 max=0.34358 Jy/beam ! Writing clean map to FITS file: J1222+0413_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.34358 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000342799 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.299318 0.299318 0.598635 1.19727 2.39454 4.78908 9.57817 19.1563 38.3127 76.6253 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.343 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.686 x 13.85 at -18.66 degrees (North through East) ! Clean map min=-0.0033914 max=0.34358 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1222+0413_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:12:27 2019