! Started logfile: J1222+0413_S_2017_05_01_pus_uvs.log on Wed May 1 18:35:29 2019 obs J1222+0413_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J1222+0413_S_2017_05_01_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.736752 visibilities/baseline/integration-bin. ! Found source: J1222+0413 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 1724 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1222+0413_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.612996Jy sigma=0.004363 ! Fit after self-cal, rms=0.605043Jy sigma=0.004309 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.271 mas, bmaj=13.19 mas, bpa=28.47 degrees ! Estimated noise=3651.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.31654 Jy ! Component: 100 - total flux cleaned = 0.387874 Jy ! Total flux subtracted in 100 components = 0.387874 Jy ! Clean residual min=-0.020260 max=0.025262 Jy/beam ! Clean residual mean=-0.000179 rms=0.007019 Jy/beam ! Combined flux in latest and established models = 0.387874 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.387874 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118175Jy sigma=0.000770 ! Fit after self-cal, rms=0.118216Jy sigma=0.000770 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.785 mas, bmaj=13.21 mas, bpa=29.15 degrees ! Estimated noise=2736.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0276758 Jy ! Component: 100 - total flux cleaned = 0.042636 Jy ! Component: 150 - total flux cleaned = 0.0518689 Jy ! Component: 200 - total flux cleaned = 0.0579518 Jy ! Total flux subtracted in 200 components = 0.0579518 Jy ! Clean residual min=-0.018264 max=0.014473 Jy/beam ! Clean residual mean=0.000052 rms=0.004202 Jy/beam ! Combined flux in latest and established models = 0.445826 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 55 components and 0.445826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111214Jy sigma=0.000721 ! Fit after self-cal, rms=0.111187Jy sigma=0.000721 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.81 HN 1.06 KP 1.03 ! LA 1.00 MK 1.00* NL 0.89 OV 1.04 ! PT 1.06 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.85 HN 1.09 KP 0.98 ! LA 0.98 MK 1.00* NL 1.00 OV 1.03 ! PT 1.02 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.92 HN 1.11 KP 1.03 ! LA 1.00 MK 1.00* NL 1.05 OV 0.95 ! PT 1.00 SC 0.97 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.21 FD 0.93 HN 1.11 KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.03 SC 1.00* ! ! ! Fit before self-cal, rms=0.111187Jy sigma=0.000721 ! Fit after self-cal, rms=0.102678Jy sigma=0.000669 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.815 mas, bmaj=13.38 mas, bpa=29.35 degrees ! Estimated noise=2735.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00289273 Jy ! Component: 100 - total flux cleaned = -0.00315833 Jy ! Component: 150 - total flux cleaned = -0.00315383 Jy ! Component: 200 - total flux cleaned = -0.0031544 Jy ! Total flux subtracted in 200 components = -0.0031544 Jy ! Clean residual min=-0.008542 max=0.007972 Jy/beam ! Clean residual mean=0.000010 rms=0.002155 Jy/beam ! Combined flux in latest and established models = 0.442672 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 80 components and 0.442672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102326Jy sigma=0.000666 ! Fit after self-cal, rms=0.102293Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102293Jy sigma=0.000666 ! Fit after self-cal, rms=0.102547Jy sigma=0.000665 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.817 mas, bmaj=13.42 mas, bpa=29.37 degrees ! Estimated noise=2736.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000962022 Jy ! Component: 100 - total flux cleaned = -0.0014421 Jy ! Component: 150 - total flux cleaned = -0.00152888 Jy ! Component: 200 - total flux cleaned = -0.0016643 Jy ! Total flux subtracted in 200 components = -0.0016643 Jy ! Clean residual min=-0.008052 max=0.007746 Jy/beam ! Clean residual mean=0.000011 rms=0.002045 Jy/beam ! Combined flux in latest and established models = 0.441008 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 88 components and 0.441008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102384Jy sigma=0.000664 ! Fit after self-cal, rms=0.102373Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.90952e-05 Jy ! Component: 100 - total flux cleaned = 2.26591e-05 Jy ! Component: 150 - total flux cleaned = -2.94e-05 Jy ! Component: 200 - total flux cleaned = -2.74089e-05 Jy ! Total flux subtracted in 200 components = -2.74089e-05 Jy ! Clean residual min=-0.007777 max=0.007816 Jy/beam ! Clean residual mean=0.000011 rms=0.002015 Jy/beam ! Combined flux in latest and established models = 0.44098 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 99 components and 0.44098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102304Jy sigma=0.000664 ! Fit after self-cal, rms=0.102296Jy sigma=0.000664 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102296Jy sigma=0.000664 ! Fit after self-cal, rms=0.102433Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.813 mas, bmaj=13.47 mas, bpa=29.4 degrees ! Estimated noise=2734.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00139105 Jy ! Component: 100 - total flux cleaned = -0.00145517 Jy ! Component: 150 - total flux cleaned = -0.00140973 Jy ! Component: 200 - total flux cleaned = -0.00145317 Jy ! Total flux subtracted in 200 components = -0.00145317 Jy ! Clean residual min=-0.007477 max=0.007775 Jy/beam ! Clean residual mean=0.000012 rms=0.001963 Jy/beam ! Combined flux in latest and established models = 0.439527 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 109 components and 0.439527 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102357Jy sigma=0.000663 ! Fit after self-cal, rms=0.102356Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.34579e-05 Jy ! Component: 100 - total flux cleaned = -9.27531e-05 Jy ! Component: 150 - total flux cleaned = -2.16594e-05 Jy ! Component: 200 - total flux cleaned = 1.18135e-05 Jy ! Total flux subtracted in 200 components = 1.18135e-05 Jy ! Clean residual min=-0.007334 max=0.007845 Jy/beam ! Clean residual mean=0.000012 rms=0.001954 Jy/beam ! Combined flux in latest and established models = 0.439539 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 120 components and 0.439539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102322Jy sigma=0.000663 ! Fit after self-cal, rms=0.102320Jy sigma=0.000663 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102320Jy sigma=0.000663 ! Fit after self-cal, rms=0.102311Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.61 mas, bmaj=13.77 mas, bpa=25.53 degrees ! Estimated noise=2812.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000532476 Jy ! Component: 100 - total flux cleaned = -0.000534521 Jy ! Component: 150 - total flux cleaned = -0.000619626 Jy ! Component: 200 - total flux cleaned = -0.000618732 Jy ! Total flux subtracted in 200 components = -0.000618732 Jy ! Clean residual min=-0.006951 max=0.008505 Jy/beam ! Clean residual mean=0.000024 rms=0.002076 Jy/beam ! Combined flux in latest and established models = 0.43892 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 135 components and 0.43892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102285Jy sigma=0.000662 ! Fit after self-cal, rms=0.102288Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000105673 Jy ! Component: 100 - total flux cleaned = -8.29158e-05 Jy ! Component: 150 - total flux cleaned = -5.96086e-05 Jy ! Component: 200 - total flux cleaned = -3.79677e-05 Jy ! Total flux subtracted in 200 components = -3.79677e-05 Jy ! Clean residual min=-0.006949 max=0.008467 Jy/beam ! Clean residual mean=0.000024 rms=0.002072 Jy/beam ! Combined flux in latest and established models = 0.438882 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 139 components and 0.438882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102277Jy sigma=0.000662 ! Fit after self-cal, rms=0.102279Jy sigma=0.000662 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.806 mas, bmaj=13.5 mas, bpa=29.44 degrees ! Estimated noise=2732.26 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.806 x 13.5 at 29.44 degrees (North through East) ! Clean map min=-0.0070787 max=0.40184 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.295 mas, bmaj=13.58 mas, bpa=29 degrees ! Estimated noise=3642.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.314954 Jy ! Component: 100 - total flux cleaned = 0.383918 Jy ! Component: 150 - total flux cleaned = 0.406681 Jy ! Component: 200 - total flux cleaned = 0.418928 Jy ! Total flux subtracted in 200 components = 0.418928 Jy ! Clean residual min=-0.009982 max=0.008781 Jy/beam ! Clean residual mean=-0.000054 rms=0.002649 Jy/beam ! Combined flux in latest and established models = 0.418928 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.418928 Jy ! Inverting map and beam ! Estimated beam: bmin=5.806 mas, bmaj=13.5 mas, bpa=29.44 degrees ! Estimated noise=2732.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00851487 Jy ! Component: 100 - total flux cleaned = 0.0125534 Jy ! Component: 150 - total flux cleaned = 0.0143645 Jy ! Component: 200 - total flux cleaned = 0.0157876 Jy ! Total flux subtracted in 200 components = 0.0157876 Jy ! Clean residual min=-0.007041 max=0.007615 Jy/beam ! Clean residual mean=-0.000006 rms=0.001988 Jy/beam ! Combined flux in latest and established models = 0.434715 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 63 components and 0.434716 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.61 mas, bmaj=13.77 mas, bpa=25.53 degrees ! Estimated noise=2812.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256224 Jy ! Component: 100 - total flux cleaned = 0.0034257 Jy ! Component: 150 - total flux cleaned = 0.00386713 Jy ! Component: 200 - total flux cleaned = 0.00418082 Jy ! Total flux subtracted in 200 components = 0.00418082 Jy ! Clean residual min=-0.006844 max=0.008483 Jy/beam ! Clean residual mean=0.000022 rms=0.002077 Jy/beam ! Combined flux in latest and established models = 0.438896 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000330801 Jy ! Component: 100 - total flux cleaned = 0.000506347 Jy ! Component: 150 - total flux cleaned = 0.000587187 Jy ! Component: 200 - total flux cleaned = 0.000639837 Jy ! Total flux subtracted in 200 components = 0.000639837 Jy ! Clean residual min=-0.006812 max=0.008449 Jy/beam ! Clean residual mean=0.000026 rms=0.002068 Jy/beam ! Combined flux in latest and established models = 0.439536 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 103 components and 0.439536 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.806 mas, bmaj=13.5 mas, bpa=29.44 degrees ! Estimated noise=2732.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000234596 Jy ! Component: 100 - total flux cleaned = 0.000326607 Jy ! Component: 150 - total flux cleaned = 0.000366589 Jy ! Component: 200 - total flux cleaned = 0.000367505 Jy ! Total flux subtracted in 200 components = 0.000367505 Jy ! Clean residual min=-0.006891 max=0.007659 Jy/beam ! Clean residual mean=0.000020 rms=0.001910 Jy/beam ! Combined flux in latest and established models = 0.439904 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 114 components and 0.439904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102242Jy sigma=0.000662 ! Fit after self-cal, rms=0.102225Jy sigma=0.000662 wmodel J1222+0413_S_2017_05_01_pus_map.mod ! Writing 114 model components to file: J1222+0413_S_2017_05_01_pus_map.mod wobs J1222+0413_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J1222+0413_S_2017_05_01_pus_uvs.fits wwins J1222+0413_S_2017_05_01_pus_map.win ! wwins: Wrote 1 windows to J1222+0413_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111067 Jy ! Component: 100 - total flux cleaned = 0.00155109 Jy ! Component: 150 - total flux cleaned = 0.00196689 Jy ! Component: 200 - total flux cleaned = 0.00225042 Jy ! Component: 250 - total flux cleaned = 0.00207324 Jy ! Component: 300 - total flux cleaned = 0.00191076 Jy ! Component: 350 - total flux cleaned = 0.00198848 Jy ! Component: 400 - total flux cleaned = 0.00205776 Jy ! Component: 450 - total flux cleaned = 0.00212722 Jy ! Component: 500 - total flux cleaned = 0.00219424 Jy ! Component: 550 - total flux cleaned = 0.00212826 Jy ! Component: 600 - total flux cleaned = 0.00219241 Jy ! Component: 650 - total flux cleaned = 0.00243532 Jy ! Component: 700 - total flux cleaned = 0.00266927 Jy ! Component: 750 - total flux cleaned = 0.00289662 Jy ! Component: 800 - total flux cleaned = 0.00328163 Jy ! Component: 850 - total flux cleaned = 0.00354678 Jy ! Component: 900 - total flux cleaned = 0.00370082 Jy ! Component: 950 - total flux cleaned = 0.00375141 Jy ! Component: 1000 - total flux cleaned = 0.00365349 Jy ! Component: 1050 - total flux cleaned = 0.00332041 Jy ! Component: 1100 - total flux cleaned = 0.00322702 Jy ! Component: 1150 - total flux cleaned = 0.00299876 Jy ! Component: 1200 - total flux cleaned = 0.00268787 Jy ! Component: 1250 - total flux cleaned = 0.00264458 Jy ! Component: 1300 - total flux cleaned = 0.00243037 Jy ! Component: 1350 - total flux cleaned = 0.00234717 Jy ! Component: 1400 - total flux cleaned = 0.00218268 Jy ! Component: 1450 - total flux cleaned = 0.00210252 Jy ! Component: 1500 - total flux cleaned = 0.0019833 Jy ! Component: 1550 - total flux cleaned = 0.00202288 Jy ! Component: 1600 - total flux cleaned = 0.00221641 Jy ! Component: 1650 - total flux cleaned = 0.002216 Jy ! Component: 1700 - total flux cleaned = 0.00240367 Jy ! Component: 1750 - total flux cleaned = 0.0025151 Jy ! Component: 1800 - total flux cleaned = 0.00266292 Jy ! Component: 1850 - total flux cleaned = 0.0028817 Jy ! Component: 1900 - total flux cleaned = 0.00316977 Jy ! Component: 1950 - total flux cleaned = 0.00338323 Jy ! Component: 2000 - total flux cleaned = 0.00355949 Jy ! Component: 2050 - total flux cleaned = 0.00369901 Jy ! Component: 2100 - total flux cleaned = 0.00383794 Jy ! Component: 2150 - total flux cleaned = 0.00394101 Jy ! Component: 2200 - total flux cleaned = 0.0039748 Jy ! Component: 2250 - total flux cleaned = 0.00394089 Jy ! Component: 2300 - total flux cleaned = 0.00397426 Jy ! Component: 2350 - total flux cleaned = 0.00390764 Jy ! Component: 2400 - total flux cleaned = 0.00387468 Jy ! Component: 2450 - total flux cleaned = 0.00367541 Jy ! Component: 2500 - total flux cleaned = 0.00347551 Jy ! Component: 2550 - total flux cleaned = 0.00330758 Jy ! Component: 2600 - total flux cleaned = 0.00317239 Jy ! Component: 2650 - total flux cleaned = 0.00293413 Jy ! Component: 2700 - total flux cleaned = 0.00279668 Jy ! Component: 2750 - total flux cleaned = 0.00265861 Jy ! Component: 2800 - total flux cleaned = 0.00244923 Jy ! Component: 2850 - total flux cleaned = 0.00230887 Jy ! Component: 2900 - total flux cleaned = 0.00216713 Jy ! Component: 2950 - total flux cleaned = 0.00198867 Jy ! Component: 3000 - total flux cleaned = 0.00180851 Jy ! Component: 3050 - total flux cleaned = 0.00162575 Jy ! Component: 3100 - total flux cleaned = 0.00155222 Jy ! Component: 3150 - total flux cleaned = 0.00144054 Jy ! Component: 3200 - total flux cleaned = 0.00136467 Jy ! Component: 3250 - total flux cleaned = 0.00121169 Jy ! Component: 3300 - total flux cleaned = 0.00113445 Jy ! Component: 3350 - total flux cleaned = 0.00101667 Jy ! Component: 3400 - total flux cleaned = 0.000857216 Jy ! Component: 3450 - total flux cleaned = 0.000695223 Jy ! Component: 3500 - total flux cleaned = 0.000572045 Jy ! Component: 3550 - total flux cleaned = 0.000446963 Jy ! Component: 3600 - total flux cleaned = 0.000277764 Jy ! Component: 3650 - total flux cleaned = 0.000105993 Jy ! Component: 3700 - total flux cleaned = 1.84722e-05 Jy ! Component: 3750 - total flux cleaned = -0.000114547 Jy ! Component: 3800 - total flux cleaned = -0.000294331 Jy ! Component: 3850 - total flux cleaned = -0.000431142 Jy ! Component: 3900 - total flux cleaned = -0.000616451 Jy ! Component: 3950 - total flux cleaned = -0.000852511 Jy ! Component: 4000 - total flux cleaned = -0.000996029 Jy ! Component: 4050 - total flux cleaned = -0.00124006 Jy ! Total flux subtracted in 4096 components = -0.00138899 Jy ! Clean residual min=-0.003045 max=0.002541 Jy/beam ! Clean residual mean=0.000019 rms=0.000804 Jy/beam ! Combined flux in latest and established models = 0.438515 Jy keep ! Adding 277 model components to the UV plane model. ! The established model now contains 391 components and 0.438515 Jy ![Exited script file: muppet] wmap "J1222+0413_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.806 x 13.5 at 29.44 degrees (North through East) ! Clean map min=-0.006714 max=0.40397 Jy/beam ! Writing clean map to FITS file: J1222+0413_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.403974 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000757187 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.562304 0.562304 1.12461 2.24922 4.49843 8.99686 17.9937 35.9874 71.9749 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.403 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.806 x 13.5 at 29.44 degrees (North through East) ! Clean map min=-0.006714 max=0.40397 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1222+0413_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:35:33 2019