! Started logfile: J1222+0413_S_2017_02_24_pus_uvs.log on Sat May 4 11:27:17 2019 obs J1222+0413_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J1222+0413_S_2017_02_24_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.866667 visibilities/baseline/integration-bin. ! Found source: J1222+0413 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 1248 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1222+0413_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.628263Jy sigma=0.005261 ! Fit after self-cal, rms=0.624235Jy sigma=0.005229 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.856 mas, bmaj=7.212 mas, bpa=-8.58 degrees ! Estimated noise=3095.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.291086 Jy ! Component: 100 - total flux cleaned = 0.355693 Jy ! Total flux subtracted in 100 components = 0.355693 Jy ! Clean residual min=-0.016133 max=0.022197 Jy/beam ! Clean residual mean=0.000017 rms=0.004338 Jy/beam ! Combined flux in latest and established models = 0.355693 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.355693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102064Jy sigma=0.000779 ! Fit after self-cal, rms=0.102033Jy sigma=0.000779 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.347 mas, bmaj=7.871 mas, bpa=-6.498 degrees ! Estimated noise=2631.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0289695 Jy ! Component: 100 - total flux cleaned = 0.042683 Jy ! Component: 150 - total flux cleaned = 0.0497992 Jy ! Component: 200 - total flux cleaned = 0.053961 Jy ! Total flux subtracted in 200 components = 0.053961 Jy ! Clean residual min=-0.013782 max=0.011723 Jy/beam ! Clean residual mean=-0.000002 rms=0.003223 Jy/beam ! Combined flux in latest and established models = 0.409654 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 28 components and 0.409654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092912Jy sigma=0.000719 ! Fit after self-cal, rms=0.092865Jy sigma=0.000719 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.95 HN 1.05 KP 0.96 ! LA 0.97 MK 0.95 NL 1.06 OV 1.04 ! PT 1.04 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.85 HN 1.03 KP 0.97 ! LA 0.93 MK 0.96 NL 0.98 OV 1.12 ! PT 1.01 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.90 HN 1.04 KP 1.04 ! LA 1.03 MK 0.99 NL 1.13 OV 0.98 ! PT 1.01 SC 1.07 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.75 HN 0.92 KP 1.00* ! LA 0.85 MK 1.32 NL 1.00* OV 1.06 ! PT 1.05 SC 1.00* ! ! ! Fit before self-cal, rms=0.092865Jy sigma=0.000719 ! Fit after self-cal, rms=0.082193Jy sigma=0.000646 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.352 mas, bmaj=7.945 mas, bpa=-6.507 degrees ! Estimated noise=2635.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00239065 Jy ! Component: 100 - total flux cleaned = -0.00261527 Jy ! Component: 150 - total flux cleaned = -0.00274282 Jy ! Component: 200 - total flux cleaned = -0.00285992 Jy ! Total flux subtracted in 200 components = -0.00285992 Jy ! Clean residual min=-0.006027 max=0.007280 Jy/beam ! Clean residual mean=0.000007 rms=0.001687 Jy/beam ! Combined flux in latest and established models = 0.406795 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 36 components and 0.406795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082004Jy sigma=0.000645 ! Fit after self-cal, rms=0.082001Jy sigma=0.000645 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082001Jy sigma=0.000645 ! Fit after self-cal, rms=0.082032Jy sigma=0.000645 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.357 mas, bmaj=7.951 mas, bpa=-6.474 degrees ! Estimated noise=2634.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00118091 Jy ! Component: 100 - total flux cleaned = -0.00133607 Jy ! Component: 150 - total flux cleaned = -0.00146925 Jy ! Component: 200 - total flux cleaned = -0.00154974 Jy ! Total flux subtracted in 200 components = -0.00154974 Jy ! Clean residual min=-0.005906 max=0.007443 Jy/beam ! Clean residual mean=0.000006 rms=0.001664 Jy/beam ! Combined flux in latest and established models = 0.405245 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 42 components and 0.405245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081956Jy sigma=0.000644 ! Fit after self-cal, rms=0.081944Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (69, 74.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00570693 Jy ! Component: 100 - total flux cleaned = 0.00571686 Jy ! Component: 150 - total flux cleaned = 0.00572428 Jy ! Component: 200 - total flux cleaned = 0.0058341 Jy ! Total flux subtracted in 200 components = 0.0058341 Jy ! Clean residual min=-0.005413 max=0.005441 Jy/beam ! Clean residual mean=0.000007 rms=0.001425 Jy/beam ! Combined flux in latest and established models = 0.411079 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 62 components and 0.411079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081147Jy sigma=0.000638 ! Fit after self-cal, rms=0.081141Jy sigma=0.000638 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081141Jy sigma=0.000638 ! Fit after self-cal, rms=0.080998Jy sigma=0.000638 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.361 mas, bmaj=7.957 mas, bpa=-6.451 degrees ! Estimated noise=2629.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000623208 Jy ! Component: 100 - total flux cleaned = 0.000447505 Jy ! Component: 150 - total flux cleaned = 0.000203856 Jy ! Component: 200 - total flux cleaned = -1.45506e-05 Jy ! Total flux subtracted in 200 components = -1.45506e-05 Jy ! Clean residual min=-0.005236 max=0.005558 Jy/beam ! Clean residual mean=0.000004 rms=0.001363 Jy/beam ! Combined flux in latest and established models = 0.411064 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 74 components and 0.411064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080810Jy sigma=0.000636 ! Fit after self-cal, rms=0.080811Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.35377e-06 Jy ! Component: 100 - total flux cleaned = -0.000130809 Jy ! Component: 150 - total flux cleaned = -0.000249194 Jy ! Component: 200 - total flux cleaned = -0.000306331 Jy ! Total flux subtracted in 200 components = -0.000306331 Jy ! Clean residual min=-0.005207 max=0.005534 Jy/beam ! Clean residual mean=0.000004 rms=0.001344 Jy/beam ! Combined flux in latest and established models = 0.410758 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 85 components and 0.410758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080719Jy sigma=0.000636 ! Fit after self-cal, rms=0.080721Jy sigma=0.000636 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080721Jy sigma=0.000636 ! Fit after self-cal, rms=0.080698Jy sigma=0.000636 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.733 mas, bmaj=12.26 mas, bpa=6.906 degrees ! Estimated noise=3170.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000255889 Jy ! Component: 100 - total flux cleaned = -0.000574457 Jy ! Component: 150 - total flux cleaned = -0.000692032 Jy ! Component: 200 - total flux cleaned = -0.000798273 Jy ! Total flux subtracted in 200 components = -0.000798273 Jy ! Clean residual min=-0.005053 max=0.005107 Jy/beam ! Clean residual mean=0.000006 rms=0.001381 Jy/beam ! Combined flux in latest and established models = 0.40996 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 108 components and 0.40996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080685Jy sigma=0.000635 ! Fit after self-cal, rms=0.080680Jy sigma=0.000635 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.6571e-05 Jy ! Component: 100 - total flux cleaned = 5.96534e-05 Jy ! Component: 150 - total flux cleaned = 3.76524e-05 Jy ! Component: 200 - total flux cleaned = -3.70204e-06 Jy ! Total flux subtracted in 200 components = -3.70204e-06 Jy ! Clean residual min=-0.005020 max=0.005091 Jy/beam ! Clean residual mean=0.000007 rms=0.001378 Jy/beam ! Combined flux in latest and established models = 0.409956 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 122 components and 0.409956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080672Jy sigma=0.000635 ! Fit after self-cal, rms=0.080668Jy sigma=0.000635 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.362 mas, bmaj=7.96 mas, bpa=-6.449 degrees ! Estimated noise=2628.96 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.362 x 7.96 at -6.449 degrees (North through East) ! Clean map min=-0.0051272 max=0.37829 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.865 mas, bmaj=7.28 mas, bpa=-8.412 degrees ! Estimated noise=3116.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.292754 Jy ! Component: 100 - total flux cleaned = 0.357079 Jy ! Component: 150 - total flux cleaned = 0.379841 Jy ! Component: 200 - total flux cleaned = 0.390805 Jy ! Total flux subtracted in 200 components = 0.390805 Jy ! Clean residual min=-0.009117 max=0.007934 Jy/beam ! Clean residual mean=0.000006 rms=0.002276 Jy/beam ! Combined flux in latest and established models = 0.390805 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.390805 Jy ! Inverting map and beam ! Estimated beam: bmin=3.362 mas, bmaj=7.96 mas, bpa=-6.449 degrees ! Estimated noise=2628.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00913954 Jy ! Component: 100 - total flux cleaned = 0.0121818 Jy ! Component: 150 - total flux cleaned = 0.0143827 Jy ! Component: 200 - total flux cleaned = 0.0157366 Jy ! Total flux subtracted in 200 components = 0.0157366 Jy ! Clean residual min=-0.005810 max=0.005676 Jy/beam ! Clean residual mean=0.000006 rms=0.001499 Jy/beam ! Combined flux in latest and established models = 0.406542 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 36 components and 0.406542 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.733 mas, bmaj=12.26 mas, bpa=6.906 degrees ! Estimated noise=3170.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00282293 Jy ! Component: 100 - total flux cleaned = 0.00389595 Jy ! Component: 150 - total flux cleaned = 0.00449398 Jy ! Component: 200 - total flux cleaned = 0.00459254 Jy ! Total flux subtracted in 200 components = 0.00459254 Jy ! Clean residual min=-0.004996 max=0.005341 Jy/beam ! Clean residual mean=0.000006 rms=0.001418 Jy/beam ! Combined flux in latest and established models = 0.411135 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.13915e-05 Jy ! Component: 100 - total flux cleaned = -0.000114316 Jy ! Component: 150 - total flux cleaned = -0.000181392 Jy ! Component: 200 - total flux cleaned = -0.000213952 Jy ! Total flux subtracted in 200 components = -0.000213952 Jy ! Clean residual min=-0.004992 max=0.005312 Jy/beam ! Clean residual mean=0.000006 rms=0.001400 Jy/beam ! Combined flux in latest and established models = 0.410921 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 79 components and 0.410921 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.362 mas, bmaj=7.96 mas, bpa=-6.449 degrees ! Estimated noise=2628.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.14847e-05 Jy ! Component: 100 - total flux cleaned = 0.000178379 Jy ! Component: 150 - total flux cleaned = 0.000460021 Jy ! Component: 200 - total flux cleaned = 0.000375966 Jy ! Total flux subtracted in 200 components = 0.000375966 Jy ! Clean residual min=-0.005305 max=0.005617 Jy/beam ! Clean residual mean=0.000003 rms=0.001373 Jy/beam ! Combined flux in latest and established models = 0.411297 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 93 components and 0.411297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080888Jy sigma=0.000637 ! Fit after self-cal, rms=0.080841Jy sigma=0.000637 wmodel J1222+0413_S_2017_02_24_pus_map.mod ! Writing 93 model components to file: J1222+0413_S_2017_02_24_pus_map.mod wobs J1222+0413_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J1222+0413_S_2017_02_24_pus_uvs.fits wwins J1222+0413_S_2017_02_24_pus_map.win ! wwins: Wrote 2 windows to J1222+0413_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186597 Jy ! Component: 100 - total flux cleaned = 0.00243442 Jy ! Component: 150 - total flux cleaned = 0.00251865 Jy ! Component: 200 - total flux cleaned = 0.00251781 Jy ! Component: 250 - total flux cleaned = 0.00282648 Jy ! Component: 300 - total flux cleaned = 0.00297496 Jy ! Component: 350 - total flux cleaned = 0.00326228 Jy ! Component: 400 - total flux cleaned = 0.00353877 Jy ! Component: 450 - total flux cleaned = 0.00347101 Jy ! Component: 500 - total flux cleaned = 0.00340515 Jy ! Component: 550 - total flux cleaned = 0.00340537 Jy ! Component: 600 - total flux cleaned = 0.00340546 Jy ! Component: 650 - total flux cleaned = 0.00340401 Jy ! Component: 700 - total flux cleaned = 0.00328472 Jy ! Component: 750 - total flux cleaned = 0.00316851 Jy ! Component: 800 - total flux cleaned = 0.00305514 Jy ! Component: 850 - total flux cleaned = 0.0028902 Jy ! Component: 900 - total flux cleaned = 0.00283727 Jy ! Component: 950 - total flux cleaned = 0.00267793 Jy ! Component: 1000 - total flux cleaned = 0.00252224 Jy ! Component: 1050 - total flux cleaned = 0.00247159 Jy ! Component: 1100 - total flux cleaned = 0.00242065 Jy ! Component: 1150 - total flux cleaned = 0.00222173 Jy ! Component: 1200 - total flux cleaned = 0.00202627 Jy ! Component: 1250 - total flux cleaned = 0.00202558 Jy ! Component: 1300 - total flux cleaned = 0.00188229 Jy ! Component: 1350 - total flux cleaned = 0.00178811 Jy ! Component: 1400 - total flux cleaned = 0.00155888 Jy ! Component: 1450 - total flux cleaned = 0.00151448 Jy ! Component: 1500 - total flux cleaned = 0.00151596 Jy ! Component: 1550 - total flux cleaned = 0.00151568 Jy ! Component: 1600 - total flux cleaned = 0.00138513 Jy ! Component: 1650 - total flux cleaned = 0.00129932 Jy ! Component: 1700 - total flux cleaned = 0.0012575 Jy ! Component: 1750 - total flux cleaned = 0.00104886 Jy ! Component: 1800 - total flux cleaned = 0.00100754 Jy ! Component: 1850 - total flux cleaned = 0.00084518 Jy ! Component: 1900 - total flux cleaned = 0.000645902 Jy ! Component: 1950 - total flux cleaned = 0.000725275 Jy ! Component: 2000 - total flux cleaned = 0.000568746 Jy ! Component: 2050 - total flux cleaned = 0.000646226 Jy ! Component: 2100 - total flux cleaned = 0.000607524 Jy ! Component: 2150 - total flux cleaned = 0.000569656 Jy ! Component: 2200 - total flux cleaned = 0.000569682 Jy ! Component: 2250 - total flux cleaned = 0.000643666 Jy ! Component: 2300 - total flux cleaned = 0.000753675 Jy ! Component: 2350 - total flux cleaned = 0.000754094 Jy ! Component: 2400 - total flux cleaned = 0.000790191 Jy ! Component: 2450 - total flux cleaned = 0.000861707 Jy ! Component: 2500 - total flux cleaned = 0.00107374 Jy ! Component: 2550 - total flux cleaned = 0.00117821 Jy ! Component: 2600 - total flux cleaned = 0.00114389 Jy ! Component: 2650 - total flux cleaned = 0.00135044 Jy ! Component: 2700 - total flux cleaned = 0.00148649 Jy ! Component: 2750 - total flux cleaned = 0.00148626 Jy ! Component: 2800 - total flux cleaned = 0.00168792 Jy ! Component: 2850 - total flux cleaned = 0.001821 Jy ! Component: 2900 - total flux cleaned = 0.0018539 Jy ! Component: 2950 - total flux cleaned = 0.00195216 Jy ! Component: 3000 - total flux cleaned = 0.00195202 Jy ! Component: 3050 - total flux cleaned = 0.00198448 Jy ! Component: 3100 - total flux cleaned = 0.00195239 Jy ! Component: 3150 - total flux cleaned = 0.00208025 Jy ! Component: 3200 - total flux cleaned = 0.00220721 Jy ! Component: 3250 - total flux cleaned = 0.00220756 Jy ! Component: 3300 - total flux cleaned = 0.00233296 Jy ! Component: 3350 - total flux cleaned = 0.00236379 Jy ! Component: 3400 - total flux cleaned = 0.00239449 Jy ! Component: 3450 - total flux cleaned = 0.00239465 Jy ! Component: 3500 - total flux cleaned = 0.00236425 Jy ! Component: 3550 - total flux cleaned = 0.00245579 Jy ! Component: 3600 - total flux cleaned = 0.00257667 Jy ! Component: 3650 - total flux cleaned = 0.00263668 Jy ! Component: 3700 - total flux cleaned = 0.00263653 Jy ! Component: 3750 - total flux cleaned = 0.00263634 Jy ! Component: 3800 - total flux cleaned = 0.00272506 Jy ! Component: 3850 - total flux cleaned = 0.00275443 Jy ! Component: 3900 - total flux cleaned = 0.00278367 Jy ! Component: 3950 - total flux cleaned = 0.0027842 Jy ! Component: 4000 - total flux cleaned = 0.00284254 Jy ! Component: 4050 - total flux cleaned = 0.00301589 Jy ! Total flux subtracted in 4096 components = 0.00304477 Jy ! Clean residual min=-0.001949 max=0.001559 Jy/beam ! Clean residual mean=0.000014 rms=0.000493 Jy/beam ! Combined flux in latest and established models = 0.414341 Jy keep ! Adding 221 model components to the UV plane model. ! The established model now contains 314 components and 0.414341 Jy ![Exited script file: muppet] wmap "J1222+0413_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.362 x 7.96 at -6.449 degrees (North through East) ! Clean map min=-0.0041259 max=0.37828 Jy/beam ! Writing clean map to FITS file: J1222+0413_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.378279 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000463823 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.367842 0.367842 0.735684 1.47137 2.94274 5.88547 11.7709 23.5419 47.0838 94.1676 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.378 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.362 x 7.96 at -6.449 degrees (North through East) ! Clean map min=-0.0041259 max=0.37828 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1222+0413_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:27:22 2019