! Started logfile: J1221-3423_S_2017_10_09_pus_uvs.log on Sun May 12 13:12:17 2019 obs J1221-3423_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1221-3423_S_2017_10_09_pus_uva.fits ! AN table 1: 115 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.540821 visibilities/baseline/integration-bin. ! Found source: J1221-3423 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 8956 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1221-3423_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 261 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 276 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 261 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 717 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.947418Jy sigma=0.006180 ! Fit after self-cal, rms=0.910183Jy sigma=0.005940 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.578 mas, bmaj=13.49 mas, bpa=-20.01 degrees ! Estimated noise=2033.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0659301 Jy ! Component: 100 - total flux cleaned = 0.0874603 Jy ! Total flux subtracted in 100 components = 0.0874603 Jy ! Clean residual min=-0.009335 max=0.013156 Jy/beam ! Clean residual mean=-0.000065 rms=0.002985 Jy/beam ! Combined flux in latest and established models = 0.0874603 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0874603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117218Jy sigma=0.000678 ! Fit after self-cal, rms=0.116818Jy sigma=0.000676 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.224 mas, bmaj=15.42 mas, bpa=-17.92 degrees ! Estimated noise=1333.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.022637 Jy ! Component: 100 - total flux cleaned = 0.0362239 Jy ! Component: 150 - total flux cleaned = 0.0445294 Jy ! Component: 200 - total flux cleaned = 0.0496566 Jy ! Total flux subtracted in 200 components = 0.0496566 Jy ! Clean residual min=-0.005885 max=0.006632 Jy/beam ! Clean residual mean=-0.000049 rms=0.001545 Jy/beam ! Combined flux in latest and established models = 0.137117 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 64 components and 0.137117 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111714Jy sigma=0.000645 ! Fit after self-cal, rms=0.111064Jy sigma=0.000642 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.86 HN 1.29 KP 1.03 ! LA 1.05 MK 1.06 NL 0.86 OV 1.00* ! PT 1.00 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.51 FD 0.93 HN 1.26 KP 0.99 ! LA 1.01 MK 0.96 NL 1.07 OV 1.00* ! PT 0.96 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.30 FD 0.97 HN 1.37 KP 0.86 ! LA 0.79 MK 1.06 NL 1.14 OV 1.00* ! PT 0.95 ! ! ! Correcting IF 4. ! A total of 162 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.11 HN 0.90 KP 1.00* ! LA 1.00* MK 0.99 NL 1.00* OV 1.00* ! PT 0.87 ! ! ! Fit before self-cal, rms=0.111064Jy sigma=0.000642 ! Fit after self-cal, rms=0.112047Jy sigma=0.000639 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.333 mas, bmaj=15.72 mas, bpa=-18.42 degrees ! Estimated noise=1381.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000728554 Jy ! Component: 100 - total flux cleaned = -0.000730559 Jy ! Component: 150 - total flux cleaned = -0.000731058 Jy ! Component: 200 - total flux cleaned = -0.000731996 Jy ! Total flux subtracted in 200 components = -0.000731996 Jy ! Clean residual min=-0.003901 max=0.004449 Jy/beam ! Clean residual mean=-0.000034 rms=0.001019 Jy/beam ! Combined flux in latest and established models = 0.136385 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 77 components and 0.136385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112017Jy sigma=0.000639 ! Fit after self-cal, rms=0.112022Jy sigma=0.000638 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112022Jy sigma=0.000638 ! Fit after self-cal, rms=0.114432Jy sigma=0.000637 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.344 mas, bmaj=15.71 mas, bpa=-18.57 degrees ! Estimated noise=1389.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000651166 Jy ! Component: 100 - total flux cleaned = -0.000654427 Jy ! Component: 150 - total flux cleaned = -0.000597261 Jy ! Component: 200 - total flux cleaned = -0.000546293 Jy ! Total flux subtracted in 200 components = -0.000546293 Jy ! Clean residual min=-0.003321 max=0.003903 Jy/beam ! Clean residual mean=-0.000036 rms=0.000884 Jy/beam ! Combined flux in latest and established models = 0.135839 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 84 components and 0.135839 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114411Jy sigma=0.000637 ! Fit after self-cal, rms=0.114475Jy sigma=0.000637 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.5, 81.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00213871 Jy ! Component: 100 - total flux cleaned = 0.00214551 Jy ! Component: 150 - total flux cleaned = 0.00198469 Jy ! Component: 200 - total flux cleaned = 0.0019862 Jy ! Total flux subtracted in 200 components = 0.0019862 Jy ! Clean residual min=-0.003390 max=0.003032 Jy/beam ! Clean residual mean=-0.000029 rms=0.000778 Jy/beam ! Combined flux in latest and established models = 0.137825 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 104 components and 0.137825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114334Jy sigma=0.000637 ! Fit after self-cal, rms=0.114289Jy sigma=0.000636 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114289Jy sigma=0.000636 ! Fit after self-cal, rms=0.115086Jy sigma=0.000636 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.343 mas, bmaj=15.7 mas, bpa=-18.59 degrees ! Estimated noise=1387.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000738697 Jy ! Component: 100 - total flux cleaned = 0.000361625 Jy ! Component: 150 - total flux cleaned = 0.000100461 Jy ! Component: 200 - total flux cleaned = 9.54276e-05 Jy ! Total flux subtracted in 200 components = 9.54276e-05 Jy ! Clean residual min=-0.003356 max=0.002992 Jy/beam ! Clean residual mean=-0.000035 rms=0.000748 Jy/beam ! Combined flux in latest and established models = 0.13792 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 111 components and 0.13792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115000Jy sigma=0.000636 ! Fit after self-cal, rms=0.114994Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.78288e-05 Jy ! Component: 100 - total flux cleaned = 4.49405e-05 Jy ! Component: 150 - total flux cleaned = 8.37418e-05 Jy ! Component: 200 - total flux cleaned = 8.42471e-05 Jy ! Total flux subtracted in 200 components = 8.42471e-05 Jy ! Clean residual min=-0.003458 max=0.003020 Jy/beam ! Clean residual mean=-0.000034 rms=0.000757 Jy/beam ! Combined flux in latest and established models = 0.138004 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 119 components and 0.138004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114941Jy sigma=0.000636 ! Fit after self-cal, rms=0.114919Jy sigma=0.000636 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114919Jy sigma=0.000636 ! Fit after self-cal, rms=0.115345Jy sigma=0.000636 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.496 mas, bmaj=27.97 mas, bpa=-6.141 degrees ! Estimated noise=1660.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.09839e-05 Jy ! Component: 100 - total flux cleaned = -8.94991e-05 Jy ! Component: 150 - total flux cleaned = -0.000149179 Jy ! Component: 200 - total flux cleaned = -0.000230934 Jy ! Total flux subtracted in 200 components = -0.000230934 Jy ! Clean residual min=-0.003072 max=0.002604 Jy/beam ! Clean residual mean=-0.000069 rms=0.000865 Jy/beam ! Combined flux in latest and established models = 0.137774 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 141 components and 0.137774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115327Jy sigma=0.000635 ! Fit after self-cal, rms=0.115331Jy sigma=0.000635 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.26179e-05 Jy ! Component: 100 - total flux cleaned = -0.000201071 Jy ! Component: 150 - total flux cleaned = -0.000273296 Jy ! Component: 200 - total flux cleaned = -0.000358712 Jy ! Total flux subtracted in 200 components = -0.000358712 Jy ! Clean residual min=-0.003100 max=0.002630 Jy/beam ! Clean residual mean=-0.000070 rms=0.000864 Jy/beam ! Combined flux in latest and established models = 0.137415 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 146 components and 0.137415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115321Jy sigma=0.000635 ! Fit after self-cal, rms=0.115306Jy sigma=0.000635 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.345 mas, bmaj=15.68 mas, bpa=-18.61 degrees ! Estimated noise=1384.5 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.345 x 15.68 at -18.61 degrees (North through East) ! Clean map min=-0.0042208 max=0.084741 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.648 mas, bmaj=13.55 mas, bpa=-20.25 degrees ! Estimated noise=2145.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.06692 Jy ! Component: 100 - total flux cleaned = 0.0892168 Jy ! Component: 150 - total flux cleaned = 0.0997035 Jy ! Component: 200 - total flux cleaned = 0.106751 Jy ! Total flux subtracted in 200 components = 0.106751 Jy ! Clean residual min=-0.007954 max=0.007477 Jy/beam ! Clean residual mean=-0.000047 rms=0.002222 Jy/beam ! Combined flux in latest and established models = 0.106751 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 48 model components to the UV plane model. ! The established model now contains 48 components and 0.106751 Jy ! Inverting map and beam ! Estimated beam: bmin=3.345 mas, bmaj=15.68 mas, bpa=-18.61 degrees ! Estimated noise=1384.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0112959 Jy ! Component: 100 - total flux cleaned = 0.0180296 Jy ! Component: 150 - total flux cleaned = 0.0217993 Jy ! Component: 200 - total flux cleaned = 0.0239319 Jy ! Total flux subtracted in 200 components = 0.0239319 Jy ! Clean residual min=-0.003971 max=0.003949 Jy/beam ! Clean residual mean=-0.000058 rms=0.000979 Jy/beam ! Combined flux in latest and established models = 0.130683 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 88 components and 0.130683 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.496 mas, bmaj=27.97 mas, bpa=-6.141 degrees ! Estimated noise=1660.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00329302 Jy ! Component: 100 - total flux cleaned = 0.00439468 Jy ! Component: 150 - total flux cleaned = 0.00466379 Jy ! Component: 200 - total flux cleaned = 0.00495121 Jy ! Total flux subtracted in 200 components = 0.00495121 Jy ! Clean residual min=-0.003087 max=0.003002 Jy/beam ! Clean residual mean=-0.000078 rms=0.000956 Jy/beam ! Combined flux in latest and established models = 0.135634 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000196429 Jy ! Component: 100 - total flux cleaned = 0.000365914 Jy ! Component: 150 - total flux cleaned = 0.000442809 Jy ! Component: 200 - total flux cleaned = 0.000514071 Jy ! Total flux subtracted in 200 components = 0.000514071 Jy ! Clean residual min=-0.003008 max=0.002736 Jy/beam ! Clean residual mean=-0.000076 rms=0.000905 Jy/beam ! Combined flux in latest and established models = 0.136148 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 136 components and 0.136148 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.345 mas, bmaj=15.68 mas, bpa=-18.61 degrees ! Estimated noise=1384.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000192452 Jy ! Component: 100 - total flux cleaned = -0.000188881 Jy ! Component: 150 - total flux cleaned = -0.000294914 Jy ! Component: 200 - total flux cleaned = -0.000292383 Jy ! Total flux subtracted in 200 components = -0.000292383 Jy ! Clean residual min=-0.003621 max=0.002767 Jy/beam ! Clean residual mean=-0.000044 rms=0.000775 Jy/beam ! Combined flux in latest and established models = 0.135856 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 150 components and 0.135856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115322Jy sigma=0.000636 ! Fit after self-cal, rms=0.115296Jy sigma=0.000636 wmodel J1221-3423_S_2017_10_09_pus_map.mod ! Writing 150 model components to file: J1221-3423_S_2017_10_09_pus_map.mod wobs J1221-3423_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1221-3423_S_2017_10_09_pus_uvs.fits wwins J1221-3423_S_2017_10_09_pus_map.win ! wwins: Wrote 2 windows to J1221-3423_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00132555 Jy ! Component: 100 - total flux cleaned = -0.00191299 Jy ! Component: 150 - total flux cleaned = -0.00191241 Jy ! Component: 200 - total flux cleaned = -0.00203911 Jy ! Component: 250 - total flux cleaned = -0.00212201 Jy ! Component: 300 - total flux cleaned = -0.00227952 Jy ! Component: 350 - total flux cleaned = -0.0024666 Jy ! Component: 400 - total flux cleaned = -0.00261041 Jy ! Component: 450 - total flux cleaned = -0.00281934 Jy ! Component: 500 - total flux cleaned = -0.00302199 Jy ! Component: 550 - total flux cleaned = -0.0032849 Jy ! Component: 600 - total flux cleaned = -0.00354008 Jy ! Component: 650 - total flux cleaned = -0.00375805 Jy ! Component: 700 - total flux cleaned = -0.00400101 Jy ! Component: 750 - total flux cleaned = -0.00411988 Jy ! Component: 800 - total flux cleaned = -0.00429488 Jy ! Component: 850 - total flux cleaned = -0.00432339 Jy ! Component: 900 - total flux cleaned = -0.00440723 Jy ! Component: 950 - total flux cleaned = -0.00448925 Jy ! Component: 1000 - total flux cleaned = -0.00454316 Jy ! Component: 1050 - total flux cleaned = -0.00459593 Jy ! Component: 1100 - total flux cleaned = -0.00464693 Jy ! Component: 1150 - total flux cleaned = -0.00464664 Jy ! Component: 1200 - total flux cleaned = -0.00472106 Jy ! Component: 1250 - total flux cleaned = -0.00474528 Jy ! Component: 1300 - total flux cleaned = -0.00479315 Jy ! Component: 1350 - total flux cleaned = -0.00484035 Jy ! Component: 1400 - total flux cleaned = -0.00486344 Jy ! Component: 1450 - total flux cleaned = -0.00486337 Jy ! Component: 1500 - total flux cleaned = -0.00488623 Jy ! Component: 1550 - total flux cleaned = -0.00488618 Jy ! Component: 1600 - total flux cleaned = -0.00490811 Jy ! Component: 1650 - total flux cleaned = -0.00495058 Jy ! Component: 1700 - total flux cleaned = -0.00499241 Jy ! Component: 1750 - total flux cleaned = -0.00493073 Jy ! Component: 1800 - total flux cleaned = -0.00495163 Jy ! Component: 1850 - total flux cleaned = -0.00493179 Jy ! Component: 1900 - total flux cleaned = -0.0049713 Jy ! Component: 1950 - total flux cleaned = -0.00502937 Jy ! Component: 2000 - total flux cleaned = -0.00499099 Jy ! Component: 2050 - total flux cleaned = -0.00506659 Jy ! Component: 2100 - total flux cleaned = -0.00508497 Jy ! Component: 2150 - total flux cleaned = -0.00508526 Jy ! Component: 2200 - total flux cleaned = -0.00512212 Jy ! Component: 2250 - total flux cleaned = -0.00514022 Jy ! Component: 2300 - total flux cleaned = -0.00521199 Jy ! Component: 2350 - total flux cleaned = -0.00526504 Jy ! Component: 2400 - total flux cleaned = -0.00528244 Jy ! Component: 2450 - total flux cleaned = -0.00528249 Jy ! Component: 2500 - total flux cleaned = -0.0053518 Jy ! Component: 2550 - total flux cleaned = -0.00542046 Jy ! Component: 2600 - total flux cleaned = -0.00550553 Jy ! Component: 2650 - total flux cleaned = -0.00555601 Jy ! Component: 2700 - total flux cleaned = -0.00560606 Jy ! Component: 2750 - total flux cleaned = -0.00567224 Jy ! Component: 2800 - total flux cleaned = -0.00573805 Jy ! Component: 2850 - total flux cleaned = -0.00577079 Jy ! Component: 2900 - total flux cleaned = -0.00583576 Jy ! Component: 2950 - total flux cleaned = -0.00591653 Jy ! Component: 3000 - total flux cleaned = -0.00599664 Jy ! Component: 3050 - total flux cleaned = -0.00607635 Jy ! Component: 3100 - total flux cleaned = -0.00612384 Jy ! Component: 3150 - total flux cleaned = -0.0061711 Jy ! Component: 3200 - total flux cleaned = -0.00624932 Jy ! Component: 3250 - total flux cleaned = -0.00628046 Jy ! Component: 3300 - total flux cleaned = -0.00634235 Jy ! Component: 3350 - total flux cleaned = -0.00637324 Jy ! Component: 3400 - total flux cleaned = -0.006465 Jy ! Component: 3450 - total flux cleaned = -0.0064649 Jy ! Component: 3500 - total flux cleaned = -0.0064953 Jy ! Component: 3550 - total flux cleaned = -0.00655579 Jy ! Component: 3600 - total flux cleaned = -0.00660098 Jy ! Component: 3650 - total flux cleaned = -0.00664601 Jy ! Component: 3700 - total flux cleaned = -0.00669085 Jy ! Component: 3750 - total flux cleaned = -0.00676523 Jy ! Component: 3800 - total flux cleaned = -0.00680968 Jy ! Component: 3850 - total flux cleaned = -0.00685409 Jy ! Component: 3900 - total flux cleaned = -0.00692796 Jy ! Component: 3950 - total flux cleaned = -0.0069869 Jy ! Component: 4000 - total flux cleaned = -0.00708971 Jy ! Component: 4050 - total flux cleaned = -0.00714828 Jy ! Total flux subtracted in 4096 components = -0.00719214 Jy ! Clean residual min=-0.000903 max=0.000954 Jy/beam ! Clean residual mean=-0.000009 rms=0.000256 Jy/beam ! Combined flux in latest and established models = 0.128664 Jy keep ! Adding 234 model components to the UV plane model. ! The established model now contains 384 components and 0.128664 Jy ![Exited script file: muppet] wmap "J1221-3423_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.345 x 15.68 at -18.61 degrees (North through East) ! Clean map min=-0.0035428 max=0.083812 Jy/beam ! Writing clean map to FITS file: J1221-3423_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0838119 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000244092 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.873714 0.873714 1.74743 3.49485 6.98971 13.9794 27.9588 55.9177 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.083 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.345 x 15.68 at -18.61 degrees (North through East) ! Clean map min=-0.0035428 max=0.083812 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1221-3423_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:12:22 2019