! Started logfile: J1221-3423_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:13:29 2019 obs J1221-3423_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J1221-3423_S_2017_01_16_pus_uva.fits ! AN table 1: 96 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.697222 visibilities/baseline/integration-bin. ! Found source: J1221-3423 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 12048 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1221-3423_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 153 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 153 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 153 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 304 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.942859Jy sigma=0.005311 ! Fit after self-cal, rms=0.896334Jy sigma=0.005102 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.093 mas, bmaj=12.09 mas, bpa=17.01 degrees ! Estimated noise=1944.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0876859 Jy ! Component: 100 - total flux cleaned = 0.107837 Jy ! Total flux subtracted in 100 components = 0.107837 Jy ! Clean residual min=-0.006338 max=0.007677 Jy/beam ! Clean residual mean=-0.000035 rms=0.001913 Jy/beam ! Combined flux in latest and established models = 0.107837 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.107837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145574Jy sigma=0.000673 ! Fit after self-cal, rms=0.145356Jy sigma=0.000672 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.962 mas, bmaj=14.89 mas, bpa=15.63 degrees ! Estimated noise=1216.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134046 Jy ! Component: 100 - total flux cleaned = 0.0201715 Jy ! Component: 150 - total flux cleaned = 0.0238128 Jy ! Component: 200 - total flux cleaned = 0.025873 Jy ! Total flux subtracted in 200 components = 0.025873 Jy ! Clean residual min=-0.004258 max=0.005334 Jy/beam ! Clean residual mean=0.000034 rms=0.001383 Jy/beam ! Combined flux in latest and established models = 0.13371 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 43 components and 0.13371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144339Jy sigma=0.000663 ! Fit after self-cal, rms=0.144433Jy sigma=0.000663 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.94 HN 1.05 KP 0.97 ! LA 0.98 MK 1.00* NL 0.91 OV 0.97 ! PT 0.99 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.80 FD 0.98 HN 1.58 KP 1.02 ! LA 0.97 MK 1.00* NL 1.01 OV 0.98 ! PT 0.94 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.24 FD 1.00 HN 1.06 KP 1.00 ! LA 0.96 MK 1.00* NL 0.98 OV 0.91 ! PT 0.98 SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.99 HN 0.94 KP 0.70 ! LA 1.11 MK 1.00* NL 1.00* OV 0.99 ! PT 0.95 SC 0.95 ! ! ! Fit before self-cal, rms=0.144433Jy sigma=0.000663 ! Fit after self-cal, rms=0.162373Jy sigma=0.000657 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.018 mas, bmaj=15.12 mas, bpa=15.55 degrees ! Estimated noise=1223.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000806749 Jy ! Component: 100 - total flux cleaned = -0.000928866 Jy ! Component: 150 - total flux cleaned = -0.00102782 Jy ! Component: 200 - total flux cleaned = -0.00115174 Jy ! Total flux subtracted in 200 components = -0.00115174 Jy ! Clean residual min=-0.002952 max=0.003278 Jy/beam ! Clean residual mean=0.000023 rms=0.000907 Jy/beam ! Combined flux in latest and established models = 0.132558 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 58 components and 0.132558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162334Jy sigma=0.000657 ! Fit after self-cal, rms=0.162755Jy sigma=0.000656 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162755Jy sigma=0.000656 ! Fit after self-cal, rms=0.168090Jy sigma=0.000655 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.021 mas, bmaj=15.13 mas, bpa=15.56 degrees ! Estimated noise=1222.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000390145 Jy ! Component: 100 - total flux cleaned = 0.000443589 Jy ! Component: 150 - total flux cleaned = 0.000400677 Jy ! Component: 200 - total flux cleaned = 0.000361699 Jy ! Total flux subtracted in 200 components = 0.000361699 Jy ! Clean residual min=-0.002800 max=0.003059 Jy/beam ! Clean residual mean=0.000022 rms=0.000797 Jy/beam ! Combined flux in latest and established models = 0.13292 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 72 components and 0.13292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168079Jy sigma=0.000655 ! Fit after self-cal, rms=0.168198Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.09624e-05 Jy ! Component: 100 - total flux cleaned = -0.000129952 Jy ! Component: 150 - total flux cleaned = -0.000129906 Jy ! Component: 200 - total flux cleaned = -0.000145887 Jy ! Total flux subtracted in 200 components = -0.000145887 Jy ! Clean residual min=-0.002740 max=0.003024 Jy/beam ! Clean residual mean=0.000021 rms=0.000795 Jy/beam ! Combined flux in latest and established models = 0.132774 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 79 components and 0.132774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168191Jy sigma=0.000654 ! Fit after self-cal, rms=0.168196Jy sigma=0.000654 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168196Jy sigma=0.000654 ! Fit after self-cal, rms=0.168749Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.021 mas, bmaj=15.1 mas, bpa=15.49 degrees ! Estimated noise=1221.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000155972 Jy ! Component: 100 - total flux cleaned = 0.000192102 Jy ! Component: 150 - total flux cleaned = 0.000177225 Jy ! Component: 200 - total flux cleaned = 0.000177062 Jy ! Total flux subtracted in 200 components = 0.000177062 Jy ! Clean residual min=-0.002792 max=0.002968 Jy/beam ! Clean residual mean=0.000021 rms=0.000786 Jy/beam ! Combined flux in latest and established models = 0.132951 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 86 components and 0.132951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168742Jy sigma=0.000654 ! Fit after self-cal, rms=0.168757Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.39783e-05 Jy ! Component: 100 - total flux cleaned = -2.34792e-05 Jy ! Component: 150 - total flux cleaned = -2.4394e-05 Jy ! Component: 200 - total flux cleaned = -3.60251e-05 Jy ! Total flux subtracted in 200 components = -3.60251e-05 Jy ! Clean residual min=-0.002792 max=0.002951 Jy/beam ! Clean residual mean=0.000021 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 0.132915 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 89 components and 0.132915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168751Jy sigma=0.000654 ! Fit after self-cal, rms=0.168755Jy sigma=0.000654 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168755Jy sigma=0.000654 ! Fit after self-cal, rms=0.168708Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.874 mas, bmaj=27.04 mas, bpa=5.257 degrees ! Estimated noise=1382.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000260522 Jy ! Component: 100 - total flux cleaned = 0.000271037 Jy ! Component: 150 - total flux cleaned = 0.000315924 Jy ! Component: 200 - total flux cleaned = 0.00034316 Jy ! Total flux subtracted in 200 components = 0.00034316 Jy ! Clean residual min=-0.003243 max=0.003157 Jy/beam ! Clean residual mean=0.000035 rms=0.000989 Jy/beam ! Combined flux in latest and established models = 0.133258 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 93 components and 0.133258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168707Jy sigma=0.000654 ! Fit after self-cal, rms=0.168713Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.32935e-05 Jy ! Component: 100 - total flux cleaned = 3.17437e-05 Jy ! Component: 150 - total flux cleaned = 5.8792e-05 Jy ! Component: 200 - total flux cleaned = 8.12313e-05 Jy ! Total flux subtracted in 200 components = 8.12313e-05 Jy ! Clean residual min=-0.003217 max=0.003145 Jy/beam ! Clean residual mean=0.000034 rms=0.000988 Jy/beam ! Combined flux in latest and established models = 0.13334 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 94 components and 0.13334 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168713Jy sigma=0.000654 ! Fit after self-cal, rms=0.168716Jy sigma=0.000654 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.022 mas, bmaj=15.08 mas, bpa=15.45 degrees ! Estimated noise=1220.79 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.022 x 15.08 at 15.45 degrees (North through East) ! Clean map min=-0.0027918 max=0.11344 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.114 mas, bmaj=12.09 mas, bpa=16.66 degrees ! Estimated noise=1957.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0870475 Jy ! Component: 100 - total flux cleaned = 0.108851 Jy ! Component: 150 - total flux cleaned = 0.118025 Jy ! Component: 200 - total flux cleaned = 0.123388 Jy ! Total flux subtracted in 200 components = 0.123388 Jy ! Clean residual min=-0.005046 max=0.005019 Jy/beam ! Clean residual mean=-0.000008 rms=0.001228 Jy/beam ! Combined flux in latest and established models = 0.123388 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.123388 Jy ! Inverting map and beam ! Estimated beam: bmin=4.022 mas, bmaj=15.08 mas, bpa=15.45 degrees ! Estimated noise=1220.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00521913 Jy ! Component: 100 - total flux cleaned = 0.00755299 Jy ! Component: 150 - total flux cleaned = 0.00805335 Jy ! Component: 200 - total flux cleaned = 0.00827666 Jy ! Total flux subtracted in 200 components = 0.00827666 Jy ! Clean residual min=-0.002829 max=0.002805 Jy/beam ! Clean residual mean=0.000017 rms=0.000807 Jy/beam ! Combined flux in latest and established models = 0.131665 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 62 components and 0.131665 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.874 mas, bmaj=27.04 mas, bpa=5.257 degrees ! Estimated noise=1382.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000896494 Jy ! Component: 100 - total flux cleaned = 0.00099586 Jy ! Component: 150 - total flux cleaned = 0.00107493 Jy ! Component: 200 - total flux cleaned = 0.00110891 Jy ! Total flux subtracted in 200 components = 0.00110891 Jy ! Clean residual min=-0.003317 max=0.003156 Jy/beam ! Clean residual mean=0.000032 rms=0.000995 Jy/beam ! Combined flux in latest and established models = 0.132774 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.16446e-05 Jy ! Component: 100 - total flux cleaned = 4.67271e-05 Jy ! Component: 150 - total flux cleaned = 7.58638e-05 Jy ! Component: 200 - total flux cleaned = 9.04515e-05 Jy ! Total flux subtracted in 200 components = 9.04515e-05 Jy ! Clean residual min=-0.003290 max=0.003164 Jy/beam ! Clean residual mean=0.000032 rms=0.000992 Jy/beam ! Combined flux in latest and established models = 0.132864 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 70 components and 0.132864 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.022 mas, bmaj=15.08 mas, bpa=15.45 degrees ! Estimated noise=1220.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000178121 Jy ! Component: 100 - total flux cleaned = -0.000178249 Jy ! Component: 150 - total flux cleaned = -0.000177354 Jy ! Component: 200 - total flux cleaned = -0.000154521 Jy ! Total flux subtracted in 200 components = -0.000154521 Jy ! Clean residual min=-0.002809 max=0.002929 Jy/beam ! Clean residual mean=0.000020 rms=0.000792 Jy/beam ! Combined flux in latest and established models = 0.13271 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 86 components and 0.13271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168739Jy sigma=0.000654 ! Fit after self-cal, rms=0.168722Jy sigma=0.000654 wmodel J1221-3423_S_2017_01_16_pus_map.mod ! Writing 86 model components to file: J1221-3423_S_2017_01_16_pus_map.mod wobs J1221-3423_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J1221-3423_S_2017_01_16_pus_uvs.fits wwins J1221-3423_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J1221-3423_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000200622 Jy ! Component: 100 - total flux cleaned = -0.000205143 Jy ! Component: 150 - total flux cleaned = -6.94508e-05 Jy ! Component: 200 - total flux cleaned = 1.77157e-05 Jy ! Component: 250 - total flux cleaned = 0.000143358 Jy ! Component: 300 - total flux cleaned = 0.000142388 Jy ! Component: 350 - total flux cleaned = 0.000179897 Jy ! Component: 400 - total flux cleaned = 0.000217212 Jy ! Component: 450 - total flux cleaned = 0.000217309 Jy ! Component: 500 - total flux cleaned = 0.000217778 Jy ! Component: 550 - total flux cleaned = 0.000183423 Jy ! Component: 600 - total flux cleaned = 0.000115959 Jy ! Component: 650 - total flux cleaned = 8.24107e-05 Jy ! Component: 700 - total flux cleaned = 8.18772e-05 Jy ! Component: 750 - total flux cleaned = 1.80174e-05 Jy ! Component: 800 - total flux cleaned = -1.29805e-05 Jy ! Component: 850 - total flux cleaned = 1.65011e-05 Jy ! Component: 900 - total flux cleaned = -0.000133997 Jy ! Component: 950 - total flux cleaned = -0.000281723 Jy ! Component: 1000 - total flux cleaned = -0.000427387 Jy ! Component: 1050 - total flux cleaned = -0.000655104 Jy ! Component: 1100 - total flux cleaned = -0.000767013 Jy ! Component: 1150 - total flux cleaned = -0.000822132 Jy ! Component: 1200 - total flux cleaned = -0.000931686 Jy ! Component: 1250 - total flux cleaned = -0.00106589 Jy ! Component: 1300 - total flux cleaned = -0.00117129 Jy ! Component: 1350 - total flux cleaned = -0.00119672 Jy ! Component: 1400 - total flux cleaned = -0.00127372 Jy ! Component: 1450 - total flux cleaned = -0.00137472 Jy ! Component: 1500 - total flux cleaned = -0.00147461 Jy ! Component: 1550 - total flux cleaned = -0.00152358 Jy ! Component: 1600 - total flux cleaned = -0.00157203 Jy ! Component: 1650 - total flux cleaned = -0.00166823 Jy ! Component: 1700 - total flux cleaned = -0.00171531 Jy ! Component: 1750 - total flux cleaned = -0.00183231 Jy ! Component: 1800 - total flux cleaned = -0.00180919 Jy ! Component: 1850 - total flux cleaned = -0.00180944 Jy ! Component: 1900 - total flux cleaned = -0.00185501 Jy ! Component: 1950 - total flux cleaned = -0.00192199 Jy ! Component: 2000 - total flux cleaned = -0.00189974 Jy ! Component: 2050 - total flux cleaned = -0.00189985 Jy ! Component: 2100 - total flux cleaned = -0.00187843 Jy ! Component: 2150 - total flux cleaned = -0.00189959 Jy ! Component: 2200 - total flux cleaned = -0.00183605 Jy ! Component: 2250 - total flux cleaned = -0.00185732 Jy ! Component: 2300 - total flux cleaned = -0.00189859 Jy ! Component: 2350 - total flux cleaned = -0.00189849 Jy ! Component: 2400 - total flux cleaned = -0.00183764 Jy ! Component: 2450 - total flux cleaned = -0.00183755 Jy ! Component: 2500 - total flux cleaned = -0.0018175 Jy ! Component: 2550 - total flux cleaned = -0.00175825 Jy ! Component: 2600 - total flux cleaned = -0.0017779 Jy ! Component: 2650 - total flux cleaned = -0.00170029 Jy ! Component: 2700 - total flux cleaned = -0.00177735 Jy ! Component: 2750 - total flux cleaned = -0.0016627 Jy ! Component: 2800 - total flux cleaned = -0.00164392 Jy ! Component: 2850 - total flux cleaned = -0.00158772 Jy ! Component: 2900 - total flux cleaned = -0.00153202 Jy ! Component: 2950 - total flux cleaned = -0.00149508 Jy ! Component: 3000 - total flux cleaned = -0.00145861 Jy ! Component: 3050 - total flux cleaned = -0.00140414 Jy ! Component: 3100 - total flux cleaned = -0.00133224 Jy ! Component: 3150 - total flux cleaned = -0.0013145 Jy ! Component: 3200 - total flux cleaned = -0.00131447 Jy ! Component: 3250 - total flux cleaned = -0.00124407 Jy ! Component: 3300 - total flux cleaned = -0.00124385 Jy ! Component: 3350 - total flux cleaned = -0.00115734 Jy ! Component: 3400 - total flux cleaned = -0.00114005 Jy ! Component: 3450 - total flux cleaned = -0.00103745 Jy ! Component: 3500 - total flux cleaned = -0.00103761 Jy ! Component: 3550 - total flux cleaned = -0.00097002 Jy ! Component: 3600 - total flux cleaned = -0.000953292 Jy ! Component: 3650 - total flux cleaned = -0.000903328 Jy ! Component: 3700 - total flux cleaned = -0.000853784 Jy ! Component: 3750 - total flux cleaned = -0.000739111 Jy ! Component: 3800 - total flux cleaned = -0.000755383 Jy ! Component: 3850 - total flux cleaned = -0.00072319 Jy ! Component: 3900 - total flux cleaned = -0.000707122 Jy ! Component: 3950 - total flux cleaned = -0.000643301 Jy ! Component: 4000 - total flux cleaned = -0.000611628 Jy ! Component: 4050 - total flux cleaned = -0.000595916 Jy ! Total flux subtracted in 4096 components = -0.000580167 Jy ! Clean residual min=-0.000999 max=0.000939 Jy/beam ! Clean residual mean=0.000001 rms=0.000304 Jy/beam ! Combined flux in latest and established models = 0.132129 Jy keep ! Adding 280 model components to the UV plane model. ! The established model now contains 366 components and 0.132129 Jy ![Exited script file: muppet] wmap "J1221-3423_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.022 x 15.08 at 15.45 degrees (North through East) ! Clean map min=-0.0020246 max=0.1127 Jy/beam ! Writing clean map to FITS file: J1221-3423_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.112697 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000297298 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.791409 0.791409 1.58282 3.16564 6.33127 12.6625 25.3251 50.6502 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.112 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.022 x 15.08 at 15.45 degrees (North through East) ! Clean map min=-0.0020246 max=0.1127 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1221-3423_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:13:34 2019