! Started logfile: J1220-2653_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:41:58 2019 obs J1220-2653_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J1220-2653_S_2017_03_27_pus_uva.fits ! AN table 1: 55 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.751515 visibilities/baseline/integration-bin. ! Found source: J1220-2653 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 7440 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1220-2653_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 74 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 74 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 301 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.980291Jy sigma=0.006244 ! Fit after self-cal, rms=0.925068Jy sigma=0.005961 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.754 mas, bmaj=6.027 mas, bpa=-2.827 degrees ! Estimated noise=2214.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0638943 Jy ! Component: 100 - total flux cleaned = 0.0779504 Jy ! Total flux subtracted in 100 components = 0.0779504 Jy ! Clean residual min=-0.007591 max=0.006091 Jy/beam ! Clean residual mean=0.000001 rms=0.001671 Jy/beam ! Combined flux in latest and established models = 0.0779505 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0779505 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117510Jy sigma=0.000662 ! Fit after self-cal, rms=0.117248Jy sigma=0.000661 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.413 mas, bmaj=7.464 mas, bpa=-0.4294 degrees ! Estimated noise=1448.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00455835 Jy ! Component: 100 - total flux cleaned = 0.00540423 Jy ! Component: 150 - total flux cleaned = 0.00540135 Jy ! Component: 200 - total flux cleaned = 0.00540239 Jy ! Total flux subtracted in 200 components = 0.00540239 Jy ! Clean residual min=-0.004469 max=0.004087 Jy/beam ! Clean residual mean=-0.000011 rms=0.001077 Jy/beam ! Combined flux in latest and established models = 0.0833528 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 25 components and 0.0833528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117040Jy sigma=0.000660 ! Fit after self-cal, rms=0.117060Jy sigma=0.000660 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.02 HN 1.03 KP 1.01 ! LA 1.12 MK 0.89 NL 1.01 OV 1.00 ! PT 0.97 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.02 HN 1.15 KP 0.94 ! LA 0.96 MK 1.50 NL 0.90 OV 1.07 ! PT 0.94 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.13 HN 1.07 KP 0.98 ! LA 1.06 MK 0.91 NL 0.96 OV 0.94 ! PT 0.96 SC 1.06 ! ! ! Correcting IF 4. ! A total of 39 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.05 HN 0.82 KP 1.00* ! LA 1.00* MK 0.92 NL 1.00* OV 0.79 ! PT 1.11 SC 0.62 ! ! ! Fit before self-cal, rms=0.117060Jy sigma=0.000660 ! Fit after self-cal, rms=0.114700Jy sigma=0.000658 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.387 mas, bmaj=7.438 mas, bpa=0.2234 degrees ! Estimated noise=1446.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000238311 Jy ! Component: 100 - total flux cleaned = 0.000206272 Jy ! Component: 150 - total flux cleaned = 0.000203458 Jy ! Component: 200 - total flux cleaned = 0.000177066 Jy ! Total flux subtracted in 200 components = 0.000177066 Jy ! Clean residual min=-0.003910 max=0.003910 Jy/beam ! Clean residual mean=-0.000012 rms=0.000954 Jy/beam ! Combined flux in latest and established models = 0.0835299 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 30 components and 0.0835299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114686Jy sigma=0.000658 ! Fit after self-cal, rms=0.114700Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114700Jy sigma=0.000657 ! Fit after self-cal, rms=0.117316Jy sigma=0.000656 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.378 mas, bmaj=7.443 mas, bpa=0.09345 degrees ! Estimated noise=1447.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000251576 Jy ! Component: 100 - total flux cleaned = 0.000251395 Jy ! Component: 150 - total flux cleaned = 0.000229261 Jy ! Component: 200 - total flux cleaned = 0.000228886 Jy ! Total flux subtracted in 200 components = 0.000228886 Jy ! Clean residual min=-0.004243 max=0.004156 Jy/beam ! Clean residual mean=-0.000014 rms=0.000910 Jy/beam ! Combined flux in latest and established models = 0.0837588 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 35 components and 0.0837588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117308Jy sigma=0.000656 ! Fit after self-cal, rms=0.117392Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000125759 Jy ! Component: 100 - total flux cleaned = -0.000145876 Jy ! Component: 150 - total flux cleaned = -0.000145032 Jy ! Component: 200 - total flux cleaned = -0.000144796 Jy ! Total flux subtracted in 200 components = -0.000144796 Jy ! Clean residual min=-0.004255 max=0.004090 Jy/beam ! Clean residual mean=-0.000014 rms=0.000923 Jy/beam ! Combined flux in latest and established models = 0.083614 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 37 components and 0.083614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117386Jy sigma=0.000656 ! Fit after self-cal, rms=0.117383Jy sigma=0.000656 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117383Jy sigma=0.000656 ! Fit after self-cal, rms=0.118030Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.375 mas, bmaj=7.435 mas, bpa=-0.01641 degrees ! Estimated noise=1446.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000104187 Jy ! Component: 100 - total flux cleaned = 0.000104274 Jy ! Component: 150 - total flux cleaned = 0.000103294 Jy ! Component: 200 - total flux cleaned = 0.000102218 Jy ! Total flux subtracted in 200 components = 0.000102218 Jy ! Clean residual min=-0.004101 max=0.004135 Jy/beam ! Clean residual mean=-0.000013 rms=0.000913 Jy/beam ! Combined flux in latest and established models = 0.0837162 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 37 components and 0.0837162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118025Jy sigma=0.000655 ! Fit after self-cal, rms=0.118046Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (109, -35.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00190946 Jy ! Component: 100 - total flux cleaned = 0.00208402 Jy ! Component: 150 - total flux cleaned = 0.00208107 Jy ! Component: 200 - total flux cleaned = 0.00208075 Jy ! Total flux subtracted in 200 components = 0.00208075 Jy ! Clean residual min=-0.003574 max=0.003431 Jy/beam ! Clean residual mean=-0.000012 rms=0.000870 Jy/beam ! Combined flux in latest and established models = 0.085797 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 57 components and 0.085797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117909Jy sigma=0.000655 ! Fit after self-cal, rms=0.117928Jy sigma=0.000654 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117928Jy sigma=0.000654 ! Fit after self-cal, rms=0.118231Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.769 mas, bmaj=17.51 mas, bpa=2.102 degrees ! Estimated noise=1779.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000649072 Jy ! Component: 100 - total flux cleaned = 0.000572537 Jy ! Component: 150 - total flux cleaned = 0.00063741 Jy ! Component: 200 - total flux cleaned = 0.000640027 Jy ! Total flux subtracted in 200 components = 0.000640027 Jy ! Clean residual min=-0.003481 max=0.004030 Jy/beam ! Clean residual mean=-0.000023 rms=0.001094 Jy/beam ! Combined flux in latest and established models = 0.086437 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 75 components and 0.086437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118193Jy sigma=0.000654 ! Fit after self-cal, rms=0.118231Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.38152e-05 Jy ! Component: 100 - total flux cleaned = -0.00021857 Jy ! Component: 150 - total flux cleaned = -0.000342421 Jy ! Component: 200 - total flux cleaned = -0.000387313 Jy ! Total flux subtracted in 200 components = -0.000387313 Jy ! Clean residual min=-0.003545 max=0.004099 Jy/beam ! Clean residual mean=-0.000023 rms=0.001099 Jy/beam ! Combined flux in latest and established models = 0.0860497 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 83 components and 0.0860497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118214Jy sigma=0.000654 ! Fit after self-cal, rms=0.118215Jy sigma=0.000654 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.372 mas, bmaj=7.424 mas, bpa=-0.08055 degrees ! Estimated noise=1444.35 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.372 x 7.424 at -0.08055 degrees (North through East) ! Clean map min=-0.0047566 max=0.079613 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.716 mas, bmaj=5.985 mas, bpa=-2.837 degrees ! Estimated noise=2154.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0626864 Jy ! Component: 100 - total flux cleaned = 0.0771425 Jy ! Component: 150 - total flux cleaned = 0.0811864 Jy ! Component: 200 - total flux cleaned = 0.0829661 Jy ! Total flux subtracted in 200 components = 0.0829661 Jy ! Clean residual min=-0.006496 max=0.005157 Jy/beam ! Clean residual mean=-0.000001 rms=0.001376 Jy/beam ! Combined flux in latest and established models = 0.0829661 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0829661 Jy ! Inverting map and beam ! Estimated beam: bmin=3.372 mas, bmaj=7.424 mas, bpa=-0.08055 degrees ! Estimated noise=1444.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00232761 Jy ! Component: 100 - total flux cleaned = 0.00341866 Jy ! Component: 150 - total flux cleaned = 0.00389435 Jy ! Component: 200 - total flux cleaned = 0.0038286 Jy ! Total flux subtracted in 200 components = 0.0038286 Jy ! Clean residual min=-0.003852 max=0.003402 Jy/beam ! Clean residual mean=-0.000012 rms=0.000896 Jy/beam ! Combined flux in latest and established models = 0.0867947 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 38 components and 0.0867947 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.769 mas, bmaj=17.51 mas, bpa=2.102 degrees ! Estimated noise=1779.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.60977e-05 Jy ! Component: 100 - total flux cleaned = -1.0892e-05 Jy ! Component: 150 - total flux cleaned = -7.80583e-05 Jy ! Component: 200 - total flux cleaned = -0.000164057 Jy ! Total flux subtracted in 200 components = -0.000164057 Jy ! Clean residual min=-0.003627 max=0.004147 Jy/beam ! Clean residual mean=-0.000024 rms=0.001108 Jy/beam ! Combined flux in latest and established models = 0.0866306 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.54346e-05 Jy ! Component: 100 - total flux cleaned = -0.000120036 Jy ! Component: 150 - total flux cleaned = -0.000161053 Jy ! Component: 200 - total flux cleaned = -0.000200163 Jy ! Total flux subtracted in 200 components = -0.000200163 Jy ! Clean residual min=-0.003650 max=0.004141 Jy/beam ! Clean residual mean=-0.000024 rms=0.001102 Jy/beam ! Combined flux in latest and established models = 0.0864305 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 53 components and 0.0864305 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.372 mas, bmaj=7.424 mas, bpa=-0.08055 degrees ! Estimated noise=1444.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.37571e-05 Jy ! Component: 100 - total flux cleaned = -0.000190152 Jy ! Component: 150 - total flux cleaned = -0.000305758 Jy ! Component: 200 - total flux cleaned = -0.000341009 Jy ! Total flux subtracted in 200 components = -0.000341009 Jy ! Clean residual min=-0.003545 max=0.003477 Jy/beam ! Clean residual mean=-0.000013 rms=0.000867 Jy/beam ! Combined flux in latest and established models = 0.0860894 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 61 components and 0.0860894 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118189Jy sigma=0.000654 ! Fit after self-cal, rms=0.118191Jy sigma=0.000654 wmodel J1220-2653_S_2017_03_27_pus_map.mod ! Writing 61 model components to file: J1220-2653_S_2017_03_27_pus_map.mod wobs J1220-2653_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J1220-2653_S_2017_03_27_pus_uvs.fits wwins J1220-2653_S_2017_03_27_pus_map.win ! wwins: Wrote 2 windows to J1220-2653_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 1.45513e-05 Jy ! Component: 100 - total flux cleaned = -0.000392943 Jy ! Component: 150 - total flux cleaned = -0.000779379 Jy ! Component: 200 - total flux cleaned = -0.00136005 Jy ! Component: 250 - total flux cleaned = -0.00176587 Jy ! Component: 300 - total flux cleaned = -0.00225623 Jy ! Component: 350 - total flux cleaned = -0.00273104 Jy ! Component: 400 - total flux cleaned = -0.0032374 Jy ! Component: 450 - total flux cleaned = -0.00359503 Jy ! Component: 500 - total flux cleaned = -0.00381335 Jy ! Component: 550 - total flux cleaned = -0.00398366 Jy ! Component: 600 - total flux cleaned = -0.00419259 Jy ! Component: 650 - total flux cleaned = -0.00439609 Jy ! Component: 700 - total flux cleaned = -0.00455595 Jy ! Component: 750 - total flux cleaned = -0.00471188 Jy ! Component: 800 - total flux cleaned = -0.0047125 Jy ! Component: 850 - total flux cleaned = -0.0048252 Jy ! Component: 900 - total flux cleaned = -0.00497165 Jy ! Component: 950 - total flux cleaned = -0.00497098 Jy ! Component: 1000 - total flux cleaned = -0.00507723 Jy ! Component: 1050 - total flux cleaned = -0.00514636 Jy ! Component: 1100 - total flux cleaned = -0.00518084 Jy ! Component: 1150 - total flux cleaned = -0.00514744 Jy ! Component: 1200 - total flux cleaned = -0.00521402 Jy ! Component: 1250 - total flux cleaned = -0.00518146 Jy ! Component: 1300 - total flux cleaned = -0.00524588 Jy ! Component: 1350 - total flux cleaned = -0.00527735 Jy ! Component: 1400 - total flux cleaned = -0.00533921 Jy ! Component: 1450 - total flux cleaned = -0.00536919 Jy ! Component: 1500 - total flux cleaned = -0.00536934 Jy ! Component: 1550 - total flux cleaned = -0.00542894 Jy ! Component: 1600 - total flux cleaned = -0.00557429 Jy ! Component: 1650 - total flux cleaned = -0.00563175 Jy ! Component: 1700 - total flux cleaned = -0.00571642 Jy ! Component: 1750 - total flux cleaned = -0.00568847 Jy ! Component: 1800 - total flux cleaned = -0.00590858 Jy ! Component: 1850 - total flux cleaned = -0.00585424 Jy ! Component: 1900 - total flux cleaned = -0.0059885 Jy ! Component: 1950 - total flux cleaned = -0.00601499 Jy ! Component: 2000 - total flux cleaned = -0.00617117 Jy ! Component: 2050 - total flux cleaned = -0.00622228 Jy ! Component: 2100 - total flux cleaned = -0.00627328 Jy ! Component: 2150 - total flux cleaned = -0.00642354 Jy ! Component: 2200 - total flux cleaned = -0.00657189 Jy ! Component: 2250 - total flux cleaned = -0.00669441 Jy ! Component: 2300 - total flux cleaned = -0.00688776 Jy ! Component: 2350 - total flux cleaned = -0.00705507 Jy ! Component: 2400 - total flux cleaned = -0.00724399 Jy ! Component: 2450 - total flux cleaned = -0.00736117 Jy ! Component: 2500 - total flux cleaned = -0.00754676 Jy ! Component: 2550 - total flux cleaned = -0.00775296 Jy ! Component: 2600 - total flux cleaned = -0.007866 Jy ! Component: 2650 - total flux cleaned = -0.00804493 Jy ! Component: 2700 - total flux cleaned = -0.00817823 Jy ! Component: 2750 - total flux cleaned = -0.00831018 Jy ! Component: 2800 - total flux cleaned = -0.00852835 Jy ! Component: 2850 - total flux cleaned = -0.00870143 Jy ! Component: 2900 - total flux cleaned = -0.00885131 Jy ! Component: 2950 - total flux cleaned = -0.00899978 Jy ! Component: 3000 - total flux cleaned = -0.00916792 Jy ! Component: 3050 - total flux cleaned = -0.00933435 Jy ! Component: 3100 - total flux cleaned = -0.00947884 Jy ! Component: 3150 - total flux cleaned = -0.00970383 Jy ! Component: 3200 - total flux cleaned = -0.00986564 Jy ! Component: 3250 - total flux cleaned = -0.0100064 Jy ! Component: 3300 - total flux cleaned = -0.010166 Jy ! Component: 3350 - total flux cleaned = -0.0103637 Jy ! Component: 3400 - total flux cleaned = -0.0104422 Jy ! Component: 3450 - total flux cleaned = -0.0105395 Jy ! Component: 3500 - total flux cleaned = -0.0106749 Jy ! Component: 3550 - total flux cleaned = -0.0108858 Jy ! Component: 3600 - total flux cleaned = -0.011038 Jy ! Component: 3650 - total flux cleaned = -0.0111325 Jy ! Component: 3700 - total flux cleaned = -0.0112822 Jy ! Component: 3750 - total flux cleaned = -0.0113938 Jy ! Component: 3800 - total flux cleaned = -0.0115413 Jy ! Component: 3850 - total flux cleaned = -0.011633 Jy ! Component: 3900 - total flux cleaned = -0.0118331 Jy ! Component: 3950 - total flux cleaned = -0.0118871 Jy ! Component: 4000 - total flux cleaned = -0.0120128 Jy ! Component: 4050 - total flux cleaned = -0.0121374 Jy ! Total flux subtracted in 4096 components = -0.0122966 Jy ! Clean residual min=-0.001032 max=0.001047 Jy/beam ! Clean residual mean=-0.000004 rms=0.000321 Jy/beam ! Combined flux in latest and established models = 0.0737928 Jy keep ! Adding 269 model components to the UV plane model. ! The established model now contains 330 components and 0.0737928 Jy ![Exited script file: muppet] wmap "J1220-2653_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.372 x 7.424 at -0.08055 degrees (North through East) ! Clean map min=-0.0049627 max=0.078294 Jy/beam ! Writing clean map to FITS file: J1220-2653_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0782939 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000314532 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.2052 1.2052 2.4104 4.82079 9.64159 19.2832 38.5663 77.1327 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.078 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.372 x 7.424 at -0.08055 degrees (North through East) ! Clean map min=-0.0049627 max=0.078294 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1220-2653_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:42:02 2019