! Started logfile: J1219+0549_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:41:45 2019 obs J1219+0549_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J1219+0549_S_2017_03_27_pus_uva.fits ! AN table 1: 174 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.842912 visibilities/baseline/integration-bin. ! Found source: J1219+0549 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 26400 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1219+0549_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 596 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.907011Jy sigma=0.007592 ! Fit after self-cal, rms=0.891957Jy sigma=0.007503 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.015 mas, bmaj=6.812 mas, bpa=2.487 degrees ! Estimated noise=896.753 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.079075 Jy ! Component: 100 - total flux cleaned = 0.109428 Jy ! Total flux subtracted in 100 components = 0.109428 Jy ! Clean residual min=-0.009291 max=0.021620 Jy/beam ! Clean residual mean=-0.000035 rms=0.002667 Jy/beam ! Combined flux in latest and established models = 0.109428 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.109428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128464Jy sigma=0.000844 ! Fit after self-cal, rms=0.128336Jy sigma=0.000843 ! Inverting map ! Added new window around map position (-5, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0218984 Jy ! Component: 100 - total flux cleaned = 0.0361455 Jy ! Total flux subtracted in 100 components = 0.0361455 Jy ! Clean residual min=-0.007875 max=0.020810 Jy/beam ! Clean residual mean=-0.000028 rms=0.002079 Jy/beam ! Combined flux in latest and established models = 0.145574 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 37 components and 0.145574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122441Jy sigma=0.000770 ! Fit after self-cal, rms=0.122136Jy sigma=0.000766 ! Inverting map ! Added new window around map position (5.5, 0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0166434 Jy ! Component: 100 - total flux cleaned = 0.027606 Jy ! Total flux subtracted in 100 components = 0.027606 Jy ! Clean residual min=-0.005672 max=0.011261 Jy/beam ! Clean residual mean=-0.000022 rms=0.001620 Jy/beam ! Combined flux in latest and established models = 0.17318 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 45 components and 0.17318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118686Jy sigma=0.000725 ! Fit after self-cal, rms=0.118582Jy sigma=0.000724 ! Inverting map ! Added new window around map position (-9.5, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108029 Jy ! Component: 100 - total flux cleaned = 0.0183226 Jy ! Total flux subtracted in 100 components = 0.0183226 Jy ! Clean residual min=-0.004918 max=0.006855 Jy/beam ! Clean residual mean=-0.000017 rms=0.001421 Jy/beam ! Combined flux in latest and established models = 0.191503 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 52 components and 0.191503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117042Jy sigma=0.000706 ! Fit after self-cal, rms=0.116976Jy sigma=0.000706 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.73 mas, bmaj=7.81 mas, bpa=4.382 degrees ! Estimated noise=577.516 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00959597 Jy ! Component: 100 - total flux cleaned = 0.0163677 Jy ! Component: 150 - total flux cleaned = 0.0212615 Jy ! Component: 200 - total flux cleaned = 0.0249155 Jy ! Total flux subtracted in 200 components = 0.0249155 Jy ! Clean residual min=-0.003531 max=0.005599 Jy/beam ! Clean residual mean=-0.000030 rms=0.001068 Jy/beam ! Combined flux in latest and established models = 0.216418 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 83 components and 0.216418 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115930Jy sigma=0.000694 ! Fit after self-cal, rms=0.115907Jy sigma=0.000694 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 1.03 KP 1.06 ! LA 0.96 MK 1.02 NL 0.98 OV 1.09 ! PT 0.98 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 HN 1.04 KP 1.01 ! LA 0.92 MK 1.07 NL 1.01 OV 1.09 ! PT 0.92 SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.05 HN 0.96 KP 1.00 ! LA 0.95 MK 1.17 NL 1.00 OV 0.98 ! PT 0.92 SC 1.02 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.05 HN 0.98 KP 1.00* ! LA 0.88 MK 1.03 NL 1.00* OV 0.93 ! PT 0.94 SC 0.68 ! ! ! Fit before self-cal, rms=0.115907Jy sigma=0.000694 ! Fit after self-cal, rms=0.096273Jy sigma=0.000688 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.762 mas, bmaj=7.863 mas, bpa=5.234 degrees ! Estimated noise=572.003 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000449952 Jy ! Component: 100 - total flux cleaned = -0.000449122 Jy ! Component: 150 - total flux cleaned = -0.000220368 Jy ! Component: 200 - total flux cleaned = -2.1078e-05 Jy ! Total flux subtracted in 200 components = -2.1078e-05 Jy ! Clean residual min=-0.003125 max=0.004188 Jy/beam ! Clean residual mean=-0.000011 rms=0.000877 Jy/beam ! Combined flux in latest and established models = 0.216397 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 94 components and 0.216397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096168Jy sigma=0.000687 ! Fit after self-cal, rms=0.096102Jy sigma=0.000687 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096102Jy sigma=0.000687 ! Fit after self-cal, rms=0.103161Jy sigma=0.000675 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.732 mas, bmaj=7.875 mas, bpa=5.645 degrees ! Estimated noise=572.643 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000549459 Jy ! Component: 100 - total flux cleaned = 0.000918972 Jy ! Component: 150 - total flux cleaned = 0.00103927 Jy ! Component: 200 - total flux cleaned = 0.00107588 Jy ! Total flux subtracted in 200 components = 0.00107588 Jy ! Clean residual min=-0.002208 max=0.003364 Jy/beam ! Clean residual mean=-0.000003 rms=0.000641 Jy/beam ! Combined flux in latest and established models = 0.217473 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 113 components and 0.217473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103086Jy sigma=0.000675 ! Fit after self-cal, rms=0.103962Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (14, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00280251 Jy ! Component: 100 - total flux cleaned = 0.00346081 Jy ! Component: 150 - total flux cleaned = 0.00395481 Jy ! Component: 200 - total flux cleaned = 0.00421901 Jy ! Total flux subtracted in 200 components = 0.00421901 Jy ! Clean residual min=-0.002146 max=0.002407 Jy/beam ! Clean residual mean=-0.000000 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.221692 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 138 components and 0.221692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103860Jy sigma=0.000672 ! Fit after self-cal, rms=0.103834Jy sigma=0.000672 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103834Jy sigma=0.000672 ! Fit after self-cal, rms=0.128031Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.716 mas, bmaj=7.872 mas, bpa=5.597 degrees ! Estimated noise=571.093 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152213 Jy ! Component: 100 - total flux cleaned = 0.00182841 Jy ! Component: 150 - total flux cleaned = 0.00182872 Jy ! Component: 200 - total flux cleaned = 0.00189795 Jy ! Total flux subtracted in 200 components = 0.00189795 Jy ! Clean residual min=-0.001930 max=0.002358 Jy/beam ! Clean residual mean=0.000000 rms=0.000528 Jy/beam ! Combined flux in latest and established models = 0.22359 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 157 components and 0.22359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127971Jy sigma=0.000671 ! Fit after self-cal, rms=0.128391Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (111.5, 19). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00185657 Jy ! Component: 100 - total flux cleaned = 0.00215782 Jy ! Component: 150 - total flux cleaned = 0.00233523 Jy ! Component: 200 - total flux cleaned = 0.00236655 Jy ! Total flux subtracted in 200 components = 0.00236655 Jy ! Clean residual min=-0.001769 max=0.002129 Jy/beam ! Clean residual mean=-0.000001 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.225956 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 179 components and 0.225956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128302Jy sigma=0.000670 ! Fit after self-cal, rms=0.128298Jy sigma=0.000670 ! Inverting map ! Added new window around map position (58, -67.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105066 Jy ! Component: 100 - total flux cleaned = 0.00118983 Jy ! Component: 150 - total flux cleaned = 0.00134059 Jy ! Component: 200 - total flux cleaned = 0.00147812 Jy ! Total flux subtracted in 200 components = 0.00147812 Jy ! Clean residual min=-0.001720 max=0.001947 Jy/beam ! Clean residual mean=-0.000001 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.227434 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 198 components and 0.227434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128174Jy sigma=0.000670 ! Fit after self-cal, rms=0.128152Jy sigma=0.000670 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128152Jy sigma=0.000670 ! Fit after self-cal, rms=0.147335Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.751 mas, bmaj=11.48 mas, bpa=4.524 degrees ! Estimated noise=678.337 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000948136 Jy ! Component: 100 - total flux cleaned = 0.00138644 Jy ! Component: 150 - total flux cleaned = 0.00165265 Jy ! Component: 200 - total flux cleaned = 0.00177041 Jy ! Total flux subtracted in 200 components = 0.00177041 Jy ! Clean residual min=-0.002041 max=0.002031 Jy/beam ! Clean residual mean=-0.000001 rms=0.000595 Jy/beam ! Combined flux in latest and established models = 0.229205 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 217 components and 0.229205 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147292Jy sigma=0.000669 ! Fit after self-cal, rms=0.147473Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.3644e-05 Jy ! Component: 100 - total flux cleaned = 0.000160049 Jy ! Component: 150 - total flux cleaned = 0.00022901 Jy ! Component: 200 - total flux cleaned = 0.000315313 Jy ! Total flux subtracted in 200 components = 0.000315313 Jy ! Clean residual min=-0.002037 max=0.001931 Jy/beam ! Clean residual mean=-0.000001 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.22952 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 228 components and 0.22952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147443Jy sigma=0.000669 ! Fit after self-cal, rms=0.147442Jy sigma=0.000669 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.715 mas, bmaj=7.881 mas, bpa=5.562 degrees ! Estimated noise=571.286 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.715 x 7.881 at 5.562 degrees (North through East) ! Clean map min=-0.0016867 max=0.10419 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.996 mas, bmaj=6.833 mas, bpa=3.838 degrees ! Estimated noise=890.557 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.077941 Jy ! Component: 100 - total flux cleaned = 0.111164 Jy ! Component: 150 - total flux cleaned = 0.133573 Jy ! Component: 200 - total flux cleaned = 0.150089 Jy ! Total flux subtracted in 200 components = 0.150089 Jy ! Clean residual min=-0.005656 max=0.009481 Jy/beam ! Clean residual mean=-0.000019 rms=0.001599 Jy/beam ! Combined flux in latest and established models = 0.150089 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.150089 Jy ! Inverting map and beam ! Estimated beam: bmin=3.715 mas, bmaj=7.881 mas, bpa=5.562 degrees ! Estimated noise=571.286 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0197763 Jy ! Component: 100 - total flux cleaned = 0.033246 Jy ! Component: 150 - total flux cleaned = 0.0427599 Jy ! Component: 200 - total flux cleaned = 0.0496635 Jy ! Total flux subtracted in 200 components = 0.0496635 Jy ! Clean residual min=-0.003252 max=0.004075 Jy/beam ! Clean residual mean=-0.000018 rms=0.000896 Jy/beam ! Combined flux in latest and established models = 0.199752 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 76 components and 0.199752 Jy ! Inverting map ! Added new window around map position (-14, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00530243 Jy ! Component: 100 - total flux cleaned = 0.00946616 Jy ! Component: 150 - total flux cleaned = 0.0128666 Jy ! Component: 200 - total flux cleaned = 0.0157365 Jy ! Total flux subtracted in 200 components = 0.0157365 Jy ! Clean residual min=-0.002375 max=0.002589 Jy/beam ! Clean residual mean=-0.000008 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 0.215489 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 131 components and 0.215489 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.751 mas, bmaj=11.48 mas, bpa=4.524 degrees ! Estimated noise=678.337 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00401244 Jy ! Component: 100 - total flux cleaned = 0.00694101 Jy ! Component: 150 - total flux cleaned = 0.00921806 Jy ! Component: 200 - total flux cleaned = 0.010413 Jy ! Total flux subtracted in 200 components = 0.010413 Jy ! Clean residual min=-0.002502 max=0.002298 Jy/beam ! Clean residual mean=-0.000004 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.225902 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101748 Jy ! Component: 100 - total flux cleaned = 0.00184738 Jy ! Component: 150 - total flux cleaned = 0.00248621 Jy ! Component: 200 - total flux cleaned = 0.00292757 Jy ! Total flux subtracted in 200 components = 0.00292757 Jy ! Clean residual min=-0.002330 max=0.001982 Jy/beam ! Clean residual mean=-0.000001 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.228829 Jy ! Adding 110 model components to the UV plane model. ! The established model now contains 222 components and 0.228829 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.715 mas, bmaj=7.881 mas, bpa=5.562 degrees ! Estimated noise=571.286 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000884495 Jy ! Component: 100 - total flux cleaned = 0.000886521 Jy ! Component: 150 - total flux cleaned = 0.000801439 Jy ! Component: 200 - total flux cleaned = 0.000760473 Jy ! Total flux subtracted in 200 components = 0.000760473 Jy ! Clean residual min=-0.001628 max=0.001879 Jy/beam ! Clean residual mean=0.000000 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.22959 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 242 components and 0.22959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147499Jy sigma=0.000670 ! Fit after self-cal, rms=0.147505Jy sigma=0.000670 wmodel J1219+0549_S_2017_03_27_pus_map.mod ! Writing 242 model components to file: J1219+0549_S_2017_03_27_pus_map.mod wobs J1219+0549_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J1219+0549_S_2017_03_27_pus_uvs.fits wwins J1219+0549_S_2017_03_27_pus_map.win ! wwins: Wrote 8 windows to J1219+0549_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000609758 Jy ! Component: 100 - total flux cleaned = 0.000825203 Jy ! Component: 150 - total flux cleaned = 0.00112148 Jy ! Component: 200 - total flux cleaned = 0.00132258 Jy ! Component: 250 - total flux cleaned = 0.00160102 Jy ! Component: 300 - total flux cleaned = 0.00184444 Jy ! Component: 350 - total flux cleaned = 0.00202966 Jy ! Component: 400 - total flux cleaned = 0.00226329 Jy ! Component: 450 - total flux cleaned = 0.00251802 Jy ! Component: 500 - total flux cleaned = 0.00271825 Jy ! Component: 550 - total flux cleaned = 0.00291504 Jy ! Component: 600 - total flux cleaned = 0.00308454 Jy ! Component: 650 - total flux cleaned = 0.00325176 Jy ! Component: 700 - total flux cleaned = 0.00344027 Jy ! Component: 750 - total flux cleaned = 0.00367207 Jy ! Component: 800 - total flux cleaned = 0.0037861 Jy ! Component: 850 - total flux cleaned = 0.00389929 Jy ! Component: 900 - total flux cleaned = 0.00405591 Jy ! Component: 950 - total flux cleaned = 0.0043205 Jy ! Component: 1000 - total flux cleaned = 0.00449456 Jy ! Component: 1050 - total flux cleaned = 0.00471043 Jy ! Component: 1100 - total flux cleaned = 0.00500916 Jy ! Component: 1150 - total flux cleaned = 0.00517807 Jy ! Component: 1200 - total flux cleaned = 0.00536663 Jy ! Component: 1250 - total flux cleaned = 0.00563581 Jy ! Component: 1300 - total flux cleaned = 0.00590238 Jy ! Component: 1350 - total flux cleaned = 0.00608519 Jy ! Component: 1400 - total flux cleaned = 0.00632644 Jy ! Component: 1450 - total flux cleaned = 0.00658522 Jy ! Component: 1500 - total flux cleaned = 0.00682197 Jy ! Component: 1550 - total flux cleaned = 0.00703692 Jy ! Component: 1600 - total flux cleaned = 0.00725012 Jy ! Component: 1650 - total flux cleaned = 0.0074998 Jy ! Component: 1700 - total flux cleaned = 0.00770927 Jy ! Component: 1750 - total flux cleaned = 0.00787897 Jy ! Component: 1800 - total flux cleaned = 0.00812239 Jy ! Component: 1850 - total flux cleaned = 0.00836376 Jy ! Component: 1900 - total flux cleaned = 0.00856612 Jy ! Component: 1950 - total flux cleaned = 0.00871245 Jy ! Component: 2000 - total flux cleaned = 0.00894825 Jy ! Component: 2050 - total flux cleaned = 0.00919992 Jy ! Component: 2100 - total flux cleaned = 0.00943209 Jy ! Component: 2150 - total flux cleaned = 0.00964476 Jy ! Component: 2200 - total flux cleaned = 0.00983847 Jy ! Component: 2250 - total flux cleaned = 0.0100485 Jy ! Component: 2300 - total flux cleaned = 0.0103264 Jy ! Component: 2350 - total flux cleaned = 0.0105161 Jy ! Component: 2400 - total flux cleaned = 0.010773 Jy ! Component: 2450 - total flux cleaned = 0.0109603 Jy ! Component: 2500 - total flux cleaned = 0.0111802 Jy ! Component: 2550 - total flux cleaned = 0.0113984 Jy ! Component: 2600 - total flux cleaned = 0.0116654 Jy ! Component: 2650 - total flux cleaned = 0.0118146 Jy ! Component: 2700 - total flux cleaned = 0.0120289 Jy ! Component: 2750 - total flux cleaned = 0.0122749 Jy ! Component: 2800 - total flux cleaned = 0.0124865 Jy ! Component: 2850 - total flux cleaned = 0.012697 Jy ! Component: 2900 - total flux cleaned = 0.0129226 Jy ! Component: 2950 - total flux cleaned = 0.0130667 Jy ! Component: 3000 - total flux cleaned = 0.0132261 Jy ! Component: 3050 - total flux cleaned = 0.0134638 Jy ! Component: 3100 - total flux cleaned = 0.0136214 Jy ! Component: 3150 - total flux cleaned = 0.013794 Jy ! Component: 3200 - total flux cleaned = 0.0139813 Jy ! Component: 3250 - total flux cleaned = 0.0142141 Jy ! Component: 3300 - total flux cleaned = 0.014353 Jy ! Component: 3350 - total flux cleaned = 0.014522 Jy ! Component: 3400 - total flux cleaned = 0.0147056 Jy ! Component: 3450 - total flux cleaned = 0.0149034 Jy ! Component: 3500 - total flux cleaned = 0.0150398 Jy ! Component: 3550 - total flux cleaned = 0.0151755 Jy ! Component: 3600 - total flux cleaned = 0.0153555 Jy ! Component: 3650 - total flux cleaned = 0.0155197 Jy ! Component: 3700 - total flux cleaned = 0.0157129 Jy ! Component: 3750 - total flux cleaned = 0.0158904 Jy ! Component: 3800 - total flux cleaned = 0.0160082 Jy ! Component: 3850 - total flux cleaned = 0.016155 Jy ! Component: 3900 - total flux cleaned = 0.0163593 Jy ! Component: 3950 - total flux cleaned = 0.0165046 Jy ! Component: 4000 - total flux cleaned = 0.016606 Jy ! Component: 4050 - total flux cleaned = 0.0167644 Jy ! Total flux subtracted in 4096 components = 0.0168792 Jy ! Clean residual min=-0.000775 max=0.000918 Jy/beam ! Clean residual mean=0.000001 rms=0.000265 Jy/beam ! Combined flux in latest and established models = 0.246469 Jy keep ! Adding 281 model components to the UV plane model. ! The established model now contains 523 components and 0.246469 Jy ![Exited script file: muppet] wmap "J1219+0549_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.715 x 7.881 at 5.562 degrees (North through East) ! Clean map min=-0.0013746 max=0.10345 Jy/beam ! Writing clean map to FITS file: J1219+0549_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.103445 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000262824 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.762213 0.762213 1.52443 3.04885 6.0977 12.1954 24.3908 48.7816 97.5632 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.103 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.715 x 7.881 at 5.562 degrees (North through East) ! Clean map min=-0.0013746 max=0.10345 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1219+0549_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:41:51 2019